Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Communication architecture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Ultra Low Power, Radiation Tolerant UHF Radio Technologies for In Situ Communication Applications

For future deep space missions, significant reductions in the mass and power requirements for short-range telecommunication systems will be critical in enabling a wide variety of new mission concepts. These possibilities include penetrators, gliders, miniature rovers, and sensor networks. Under joint funding from NASA's Cross Enterprise and JPL's Telecommunications and Mission technology programs, recent development activity has focused on the design of ultralow mass and power transceiver systems and subsystems suitable for operation in a flight environment. For these efforts, the functionality of the transceiver has been targeted towards a specific Mars communications scenario. However, the overall architecture is well suited to any short or medium range application where a remote probe will aperiodically communicate with a base station, possibly an orbiter, for the eventual purpose of relaying science information back to Earth. In 2001, these sponsors have been augmented with collaborative expertise and funding from JPL's Center for Integrated Space Microsystems in order to migrate existing concepts and designs to a System on a Chip (SOAC) solution. Additional information is contained in the original extended abstract.

Lay, N. E.↗

A geostationary satellite system for mobile multimedia applications using portable, aeronautical and mobile terminals

A geostationary satellite system for mobile multimedia services via portable, aeronautical and mobile terminals was developed within the framework of the Advanced Communications Technology Service (ACTS) programs. The architecture of the system developed under the 'satellite extremely high frequency communications for multimedia mobile services (SECOMS)/ACTS broadband aeronautical terminal experiment' (ABATE) project is presented. The system will be composed of a Ka band system component, and an extremely high frequency band component. The major characteristics of the space segment, the ground control station and the portable, aeronautical and mobile user terminals are outlined.

Losquadro, G.↗

Communications systems evolutionary scenarios for Martian SEI support

A set of architectures for the Mars-earth SEI space communications link is identified and characterized. A 'road map' is defined that illustrates the most logical and efficient evolutionary paths for the SEI Mars-earth link. The major features of the road map include three alternative evolutionary paths meeting the data rate requirements that may grow from 10 Mbps to 1 Gbps in the 2008-2025 time frame. All three paths begin with a Ka-band MRS-EST baseline link in 2000, and diverge from this baseline as time progresses.

Kwong, P. W.↗

Study of a Tracking and Data Acquisition System (TDAS) in the 1990's

Progress in concept definition studies, operational assessments, and technology demonstrations for the Tracking and Data Acquisition System (TDAS) is reported. The proposed TDAS will be the follow-on to the Tracking and Data Relay Satellite System and will function as a key element of the NASA End-to-End Data System, providing the tracking and data acquisition interface between user accessible data ports on Earth and the user's spaceborne equipment. Technical activities of the "spacecraft data system architecture' task and the "communication mission model' task are emphasized. The objective of the first task is to provide technology forecasts for sensor data handling, navigation and communication systems, and estimate corresponding costs. The second task is concerned with developing a parametric description of the required communication channels. Other tasks with significant activity include the "frequency plan and radio interference model' and the "Viterbi decoder/simulator study'.

Source record↗

A Large-Grain Mapping Approach for Multiprocessor Systems Through Data Flow Model Ph.D. Thesis

A large-grain level mapping method is presented of numerical oriented applications onto multiprocessor systems. The method is based on the large-grain data flow representation of the input application and it assumes a general interconnection topology of the multiprocessor system. The large-grain data flow model was used because such representation best exhibits inherited parallelism in many important applications, e.g., CFD models based on partial differential equations can be presented in large-grain data flow format, very effectively. A generalized interconnection topology of the multiprocessor architecture is considered, including such architectural issues as interprocessor communication cost, with the aim to identify the 'best matching' between the application and the multiprocessor structure. The objective is to minimize the total execution time of the input algorithm running on the target system. The mapping strategy consists of the following: (1) large-grain data flow graph generation from the input application using compilation techniques; (2) data flow graph partitioning into basic computation blocks; and (3) physical mapping onto the target multiprocessor using a priority allocation scheme for the computation blocks.

Kim, Hwa-Soo↗

Architecture and CONOPS of Next-Generation Ground Network for Communications and Tracking of Interplanetary SmallSats

As small spacecraft venture out of Earth orbit, they will encounter challenges not experienced or addressed by the numerous low Earth orbit (LEO) CubeSat and Smallsat missions staged to date. The LEO CubeSats typically use low-cost, proven CubeSat radios, antennas, and university ground stations with small apertures. As more ambitious yet cost-constrained space mission concepts to the Moon and beyond are being developed, CubeSats and smallsats have the potential to provide a more affordable platform for exploring deep space and performing the associated science. Some of the challenges that have, so far, slowed the proliferation of small interplanetary spacecraft are those of communications and navigation.

Cheung, Kar-ming↗

A Spectrally Efficient Ka-Band GaN Power Amplifier with Scalable Power Combining Architecture for Lunar High Data Rate Direct-to-Earth Communications

The output power from a single gallium nitride (GaN) high electron mobility transistor (HEMT) based monolithic microwave integrated circuit (MMIC) power amplifier (PA) chip is limited to few watts. To achieve higher power, the output from several chips have to be combined. In this paper we present, the results of a study conducted to investigate a 2-way power combiner to combine the output power from two GaN MMIC based high power amplifier (HPA) chips The parameters investigated includes the power combiner characteristics, individual GaN MMIC based HPA output power, gain, and power added efficiency, and the overall performance of the combined amplifier.

Gallium Nitride↗

MOC Automation with GMSEC and the Generic Extendable Message Utility (GEMU)

Automation has become critical for ground systems, improving efficiency and reliability while reducing costs across mission operations. The Goddard Mission Services Evolution Center (GMSEC) software suite has played a significant role in enabling this automation, leveraging its publish/subscribe paradigm through a message bus architecture to facilitate seamless communication and data flow. Historically, the GMSEC suite, through components like Criteria Action Table (CAT) has been pivotal in automating ground system capabilities. However, as technology advances, limitations in automation with CAT have emerged, creating an opportunity to enhance ground system automation through the introduction of GEMU. This new GMSEC component brings new capabilities and addresses specific automation constraints that CAT could not overcome, allowing for more sophisticated, flexible, and efficient message processing. GEMU, at its core, is designed to accelerate the development of custom GMSEC-compliant applications. It enables users to construct automated message processing pipelines quickly, supporting both drag-and-drop web-based configuration and scripting through a simple domain-specific language. This advancement not only simplifies the process but also reduces the time needed for implementing automated solutions. This presentation will outline GEMU’s potential value in improving mission operations automation. It will highlight the benefits of transitioning from CAT to GEMU and offer insights into how GEMU can drive operational efficiencies. We will also provide an overview of the automation capabilities of GEMU and its potential impact on mission operations centers (MOCs).

GMSEC↗

The CubeSat Communication Platform (CCP) – Mission Overview and ConOps

This paper presents the CubeSat Communications Platform (CCP) mission concept, architecture, and development. The CCP is a CubeSat demonstration mission, being developed at the University of Alaska Fairbanks to improve satellite communication capabilities. The CCP payloads include a Software Defined Radio (SDR) with Variable Coded Modulation (VCM) protocols, and an S-band phased array antenna. The mission will test the performance of the VCM protocols versus conventional fixed modulation and coding schemes, relative to the percentage of the Shannon Channel Capacity that each scheme achieves over entire satellite passes. The mission will also test the performance of the phased array antenna, with regard to beamforming and interrogator scanning accuracy. The CCP Mission is collaborating with NASA's Near Space Network (NSN) to demonstrate DVB-S2 VCM and achievable maximum data rate in NASA S-band 5 MHz channel. NSN currently supports missions that communicate with fixed channel codes, modulations, and symbol rates, resulting in a constant data rate that does not adapt to the dynamic link margin. VCM adapts to the dynamics of the link to increase information throughput by changing modulation and coding when the signal-to-noise ratio (SNR) is high. The CCP will be the first mission to demonstrate VCM with NSN ground stations.

phased antenna array↗

Phased Array-Fed Reflector (PAFR) Antenna Architectures for Space-Based Sensors

Communication link and target ranges for satellite communications (SATCOM) and space-based sensors (e.g. radars) vary from approximately 1000 km (for LEO satellites) to 35,800 km (for GEO satellites). At these long ranges, large antenna gains are required and legacy payloads have usually employed large reflectors with single beams that are either fixed or mechanically steered. For many applications, there are inherent limitations that are associated with the use of these legacy antennas/payloads. Hybrid antenna designs using Phased Array Fed Reflectors (PAFRs) provide a compromise between reflectors and Direct Radiating phased Arrays (DRAs). PAFRs provide many of the performance benefits of DRAs while utilizing much smaller, lower cost (feed) arrays. The primary limitation associated with hybrid PAFR architectures is electronic scan range; approximately +/-5 to +/- 10 degrees is typical, but this range depends on many factors. For LEO applications, the earth FOV is approximately +/-55 degrees which is well beyond the range of electronic scanning for PAFRs. However, for some LEO missions, limited scanning is sufficient or the CONOPS and space vehicle designs can be developed to incorporate a combination mechanical slewing and electronic scanning. In this paper, we review, compare and contrast various PAFR architectures with a focus on their general applicability to space missions. We compare the RF performance of various PAFR architectures and describe key hardware design and implementation trades. Space-based PAFR designs are highly multi-disciplinary and we briefly address key hardware engineering design areas. Finally, we briefly describe two PAFR antenna architectures that have been developed at Northrop Grumman.

antenna↗

Latest Status of the CCSDS Optical Communications Working Group

International civil space agencies around the world are working together in the Interagency Operation Advisory Group (IOAG) and the Consultative Committee for Space Data Systems (CCSDS) to develop interoperability architectures and standards for space communications. Within CCSDS, there is a working group dedicated on developing recommendations and standards for optical communications. These standards include recommendations for the physical layer, coding and synchronization layer, and best practices for measuring and monitoring atmospheric conditions and operating optical links. The working group has developed standards for both Near Earth and deep space robotic and hum exploration missions. The standards generally address both free space links between spacecraft and free space links between spacecraft and ground. This paper will provide an overview and update on the set of standards the CCSDS Optical Communications Working Group has developed

Bernard L Edwards↗

Access control and privacy in large distributed systems

Large scale distributed systems consists of workstations, mainframe computers, supercomputers and other types of servers, all connected by a computer network. These systems are being used in a variety of applications including the support of collaborative scientific research. In such an environment, issues of access control and privacy arise. Access control is required for several reasons, including the protection of sensitive resources and cost control. Privacy is also required for similar reasons, including the protection of a researcher's proprietary results. A possible architecture for integrating available computer and communications security technologies into a system that meet these requirements is described. This architecture is meant as a starting point for discussion, rather that the final answer.

Leiner, B. M.↗

Access control and privacy in large distributed systems

Large scale distributed systems consists of workstations, mainframe computers, supercomputers and other types of servers, all connected by a computer network. These systems are being used in a variety of applications including the support of collaborative scientific research. In such an environment, issues of access control and privacy arise. Access control is required for several reasons, including the protection of sensitive resources and cost control. Privacy is also required for similar reasons, including the protection of a researcher's proprietary results. A possible architecture for integrating available computer and communications security technologies into a system that meet these requirements is described. This architecture is meant as a starting point for discussion, rather that the final answer.

Leiner, B. M.↗

From neural-based object recognition toward microelectronic eyes

Engineering neural network systems are best known for their abilities to adapt to the changing characteristics of the surrounding environment by adjusting system parameter values during the learning process. Rapid advances in analog current-mode design techniques have made possible the implementation of major neural network functions in custom VLSI chips. An electrically programmable analog synapse cell with large dynamic range can be realized in a compact silicon area. New designs of the synapse cells, neurons, and analog processor are presented. A synapse cell based on Gilbert multiplier structure can perform the linear multiplication for back-propagation networks. A double differential-pair synapse cell can perform the Gaussian function for radial-basis network. The synapse cells can be biased in the strong inversion region for high-speed operation or biased in the subthreshold region for low-power operation. The voltage gain of the sigmoid-function neurons is externally adjustable which greatly facilitates the search of optimal solutions in certain networks. Various building blocks can be intelligently connected to form useful industrial applications. Efficient data communication is a key system-level design issue for large-scale networks. We also present analog neural processors based on perceptron architecture and Hopfield network for communication applications. Biologically inspired neural networks have played an important role towards the creation of powerful intelligent machines. Accuracy, limitations, and prospects of analog current-mode design of the biologically inspired vision processing chips and cellular neural network chips are key design issues.

Sheu, Bing J.↗

Transferring Files Between the Deep Impact Spacecrafts and the Ground Data System Using the CCSDS File Delivery Protocol (CFDP): A Case Study

The CCSDS File Delivery Protocol (CFDP) Standard could reshape ground support architectures by enabling applications to communicate over the space link using reliable-symmetric transport services. JPL utilized the CFDP standard to support the Deep Impact Mission. The architecture was based on layering the CFDP applications on top of the CCSDS Space Link Extension Services for data transport from the mission control centers to the ground stations. On July 4, 2005 at 1:52 A.M. EDT, the Deep Impact impactor successfully collided with comet Tempel 1. During the final 48 hours prior to impact, over 300 files were uplinked to the spacecraft, while over 6 thousand files were downlinked from the spacecraft using the CFDP. This paper uses the Deep Impact Mission as a case study in a discussion of the CFDP architecture, Deep Impact Mission requirements, and design for integrating the CFDP into the JPL deep space support services. Issues and recommendations for future missions using CFDP are also provided.

CCSDS File Delivery Protocol (CFDP)↗

C-Band Airport Surface Communications System Standards Development. Phase II Final Report. Volume 1: Concepts of Use, Initial System Requirements, Architecture, and AeroMACS Design Considerations

This report is provided as part of ITT s NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract NNC05CA85C, Task 7: New ATM Requirements-Future Communications, C-Band and L-Band Communications Standard Development and was based on direction provided by FAA project-level agreements for New ATM Requirements-Future Communications. Task 7 included two subtasks. Subtask 7-1 addressed C-band (5091- to 5150-MHz) airport surface data communications standards development, systems engineering, test bed and prototype development, and tests and demonstrations to establish operational capability for the Aeronautical Mobile Airport Communications System (AeroMACS). Subtask 7-2 focused on systems engineering and development support of the L-band digital aeronautical communications system (L-DACS). Subtask 7-1 consisted of two phases. Phase I included development of AeroMACS concepts of use, requirements, architecture, and initial high-level safety risk assessment. Phase II builds on Phase I results and is presented in two volumes. Volume I (this document) is devoted to concepts of use, system requirements, and architecture, including AeroMACS design considerations. Volume II describes an AeroMACS prototype evaluation and presents final AeroMACS recommendations. This report also describes airport categorization and channelization methodologies. The purposes of the airport categorization task were (1) to facilitate initial AeroMACS architecture designs and enable budgetary projections by creating a set of airport categories based on common airport characteristics and design objectives, and (2) to offer high-level guidance to potential AeroMACS technology and policy development sponsors and service providers. A channelization plan methodology was developed because a common global methodology is needed to assure seamless interoperability among diverse AeroMACS services potentially supplied by multiple service providers.

Hall, Edward↗

Parallel computation of manipulator inverse dynamics

In this article, parallel computation of manipulator inverse dynamics is investigated. A hierarchical graph-based mapping approach is devised to analyze the inherent parallelism in the Newton-Euler formulation at several computational levels, and to derive the features of an abstract architecture for exploitation of parallelism. At each level, a parallel algorithm represents the application of a parallel model of computation that transforms the computation into a graph whose structure defines the features of an abstract architecture, i.e., number of processors, communication structure, etc. Data-flow analysis is employed to derive the time lower bound in the computation as well as the sequencing of the abstract architecture. The features of the target architecture are defined by optimization of the abstract architecture to exploit maximum parallelism while minimizing architectural complexity. An architecture is designed and implemented that is capable of efficient exploitation of parallelism at several computational levels. The computation time of the Newton-Euler formulation for a 6-degree-of-freedom (dof) general manipulator is measured as 187 microsec. The increase in computation time for each additional dof is 23 microsec, which leads to a computation time of less than 500 microsec, even for a 12-dof redundant arm.

Fijany, Amir↗