Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Chemical structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Characterization of Hydrophobic Silane Film Deposited on AISI 304 Stainless Steel for Corrosion Protection

This present study was conducted to determine the aptitude of hydrophobic silane coating in corrosion resistance of AISI 304 stainless steel substrate at the nanoscale. Three newly developed hydrophobic silane-based compounds of compositions, namely [tris(trimethylsiloxy)silyethyl]dimethylchlorosilane (alkyl); tridecafloro-1,1,2,2-tetrahydrooctyltrichlorosilane (FOTS); and henicosyl-1,1,2,2-tetrahydrododecyltricholrosilane (FDDTS), were used as precursors to coat AISI 304 stainless steel surfaces. Prior to deposition, the substrate surfaces were pretreated with plasma oxide via a multi-step treatment to serve as adhesion. The plasma oxide and the silane precursors were deposited by using a hybrid atomic layer deposition and chemical vapor deposition process. The structural, chemical and electrochemical stabilities were investigated using SEM, AFM, XRD, ATR-FTIR, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The results showed that the microstructures and morphology of the coated samples were similar, due to the chlorosilane functionalization. The FTIR indicated complete hydrolysis at the nanoscale while the polarization results showed that nano-coating can hamper the corrosion propagation mechanisms. Furthermore, the EIS results revealed that all the precursors acted as a barrier to AISI 304 dissolution into the electrolyte. The electrochemical effect was observed in the microstructural transformation of the coatings. Although all the precursors were shown to have been effective at few nanoscales, the stability of the FDDTS showed to have superseded that of alkyl and FOTS.

36 MATERIALS SCIENCE↗

Search for Catalysts by Inverse Design: Artificial Intelligence, Mountain Climbers, and Alchemists

In silico catalyst design is a grand challenge of chemistry. Traditional computational approaches have been limited by the need to compute properties for an intractably large number of possible catalysts. Recently, inverse design methods have emerged, starting from a desired property and optimizing a corresponding chemical structure. Techniques used for exploring chemical space include gradient-based optimization, alchemical transformations, and machine learning. Though the application of these methods to catalysis is in its early stages, further development will allow for robust computational catalyst design. This review provides an overview of the evolution of inverse design approaches and their relevance to catalysis. In conclusion, the strengths and limitations of existing techniques are highlighted, and suggestions for future research are provided.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Similar ultrafast dynamics of several dissimilar Dirac and Weyl semimetals

We report that recent years have seen the rapid discovery of solids whose low-energy electrons have a massless, linear dispersion, such as Weyl, line-node, and Dirac semimetals. The remarkable optical properties predicted in these materials show their versatile potential for optoelectronic uses. However, little is known of their response in the picoseconds after absorbing a photon. Here, we measure the ultrafast dynamics of four materials that share non-trivial band structure topology but that differ chemically, structurally, and in their low-energy band structures: ZrSiS, which hosts a Dirac line node and Dirac points; TaAs and NbP, which are Weyl semimetals; and Sr 1–y Mn 1–z Sb 2 , in which Dirac fermions coexist with broken time-reversal symmetry. After photoexcitation by a short pulse, all four relax in two stages, first sub-picosecond and then few-picosecond. Their rapid relaxation suggests that these and related materials may be suited for optical switches and fast infrared detectors. Lastly, the complex change of refractive index shows that photoexcited carrier populations persist for a few picoseconds.

36 MATERIALS SCIENCE↗

Interfaces in Heterogeneous Catalysts: Advancing Mechanistic Understanding through Atomic-Scale Measurements

Developing novel catalysts with high efficiency and selectivity is critical for enabling future clean energy conversion technologies. Interfaces in catalyst systems have long been considered the most critical factor in controlling catalytic reaction mechanisms. Interfaces include not only the catalyst surface but also interfaces within catalyst particles and those formed by constructing heterogeneous catalysts. The atomic and electronic structures of catalytic surfaces govern the kinetics of binding and release of reactant molecules from surface atoms. Interfaces within catalysts are introduced to enhance the intrinsic activity and stability of the catalyst by tuning the surface atomic and chemical structures. Examples include interfaces between the core and shell, twin or domain boundaries, or phase boundaries within single catalyst particles. In supported catalyst nanoparticles (NPs), the interface between the metallic NP and support serves as a critical tuning factor for enhancing catalytic activity. Surface electronic structure can be indirectly tuned and catalytically active sites can be increased through the use of supporting oxides. Additionally, tuning interfaces in catalyst systems has been identified as an important strategy in the design of novel catalysts. However, the governing principle of how interfaces contribute to catalyst behavior, especially in terms of interactions with intermediates and their stability during electrochemical operation, are largely unknown. This is mainly due to the evolving nature of such interfaces. Small changes in the structural and chemical configuration of these interfaces may result in altering the catalytic performance. These interfacial arrangements evolve continuously during synthesis, processing, use, and even static operation. A technique that can probe the local atomic and electronic interfacial structures with high precision while monitoring the dynamic interfacial behavior in situ is essential for elucidating the role of interfaces and providing deeper insight for fine-tuning and optimizing catalyst properties.Scanning transmission electron microscopy (STEM) has long been a primary characterization technique used for studying nanomaterials because of its exceptional imaging resolution and simultaneous chemical analysis. Over the past decade, advances in STEM, that is, the commercialization of both aberration correctors and monochromators, have significantly improved the spatial and energy resolution. Imaging atomic structures with subangstrom resolution and identifying chemical species with single-atom sensitivity are now routine for STEM. These advancements have greatly benefitted catalytic research. For example, the roles of lattice strain and surface elemental distribution and their effect on catalytic stability and reactivity have been well documented in bimetallic catalysts. In addition, three-dimensional atomic structures revealed by STEM tomography have been integrated in theoretical modeling for predictive catalyst NP design. Recent developments in stable electronic and mechanical devices have opened opportunities to monitor the evolution of catalysts in operando under synthesis and reaction conditions; high-speed direct electron detectors have achieved sub-millisecond time resolutions and allow for rapid structural and chemical changes to be captured. Investigations of catalysts using these latest microscopy techniques have provided new insights into atomic-level catalytic mechanisms. Further integration of new microscopy methods is expected to provide multidimensional descriptions of interfaces under relevant synthesis and reaction conditions.In this Account, we discuss recent insights on understanding catalyst activity, selectivity, and stability using advanced STEM techniques, with an emphasis on how critical interfaces dictate the performance of precious metal-based heterogeneous catalysts. The role of extended interfacial structures, including those between core and shell, between separate phases and twinned grains, between the catalyst surface and gas, and between metal and support are discussed. We also provide an outlook on how emerging electron microscopy techniques, such as vibrational spectroscopy and electron ptychography, will impact future catalysis research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of magnetic ionic liquids containing multiple paramagnetic lanthanide and transition metal centers and functionalized diglycolamide ligands

Magnetic ionic liquids (MILs) containing paramagnetic centers have gained widespread recognition as sustainable solvents due to their ability to respond to an external magnetic field. The physico-chemical properties of MILs are dependent on the choice of anion/cation ligands and metal centers; the search for highly tunable ligands and precursors that can confer favorable characteristics, such as low viscosity, is ongoing. Diglycolamides employed as cationic ligands have been previously shown to form hydrophobic MILs that can simultaneously incorporate multiple lanthanide metal centers in both the anion/cation. Despite their enhanced magnetic susceptibility, the effect of diglycolamide chemical structure modifications on the physico-chemical properties of MILs has not been thoroughly studied. Additionally, the possibility of forming diglycolamide-based MILs with popularly employed transition metals has not been investigated and combinations that can simultaneously embed two different types of metal centers in both the anion/cation have not been explored. In this study, thirty (30) MILs comprised of lanthanide and transition metals were synthesized by examining their chelation to both straight-chained and branched diglycolamides. Here, transition metal-based MILs were found to possess high thermal stabilities up to 235 °C compared to 192 °C for those comprised of lanthanides. While MILs comprised of rare-earth metal centers exhibited the lowest viscosities, substituting lanthanides with transition metals in just the anion or cation resulted in enhanced thermal stability and reduced viscosity. The effective magnetic moment for these MILs varied between 4.71 and 21.08 µ B and was much higher compared to all previous classes of MILs prepared using the same metals. Results from this study explore all possible modifications that can be made to these MILs in an effort to demonstrate their structural tunability, which is often highly desirable in various applications, including organic synthesis and chemical separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microscopic Observation of Solid Electrolyte Interphase Bilayer Inversion on Silicon Oxide

Silicon has been investigated in recent years as an alloying anode material to enhance gravimetric energy density in lithium-ion batteries. Although recent developments have suggested that silicon oxides exhibit improved cycling stability over pure Si, the origin of the improved cycling performance is still poorly understood. The initial solid electrolyte interphase (SEI) formation mechanisms on Si wafers with both native oxide and chemically etched thermal oxide coatings are investigated structurally, chemically, and morphologically in the nanoscale. After one electrochemical cycle, microscopy reveals that SEI formed on native SiO x features the typical SEI bilayer structure with a carbon-rich outer SEI layer and an inorganic-rich inner SEI layer. In contrast, the SEI formed on chemically etched thermal oxide shows an inversion in the structure. This work observes distinct initial SEI formation mechanisms on the HF-etched SiO 2 surface, which may be partially responsible for improved cycle life observed in SiO x -based anode materials.

25 ENERGY STORAGE↗

Multimodal x-ray and electron microscopy of the Allende meteorite

Multimodal microscopy that combines complementary nanoscale imaging techniques is critical for extracting comprehensive chemical, structural, and functional information, particularly for heterogeneous samples. X-ray microscopy can achieve high-resolution imaging of bulk materials with chemical, magnetic, electronic, and bond orientation contrast, while electron microscopy provides atomic-scale spatial resolution with quantitative elemental composition. In this work, we combine x-ray ptychography and scanning transmission x-ray spectromicroscopy with three-dimensional energy-dispersive spectroscopy and electron tomography to perform structural and chemical mapping of an Allende meteorite particle with 15-nm spatial resolution. Furthermore, we use textural and quantitative elemental information to infer the mineral composition and discuss potential processes that occurred before or after accretion. Additionally, we anticipate that correlative x-ray and electron microscopy overcome the limitations of individual imaging modalities and open up a route to future multiscale nondestructive microscopies of complex functional materials and biological systems.

79 ASTRONOMY AND ASTROPHYSICS↗

Three-dimensional atomic structure and local chemical order of medium- and high-entropy nanoalloys

Medium- and high-entropy alloys (M/HEAs) mix several principal elements with near-equiatomic composition and represent a model-shift strategy for designing previously unknown materials in metallurgy, catalysis and other fields. One of the core hypotheses of M/HEAs is lattice distortion, which has been investigated by different numerical and experimental techniques. However, determining the three-dimensional (3D) lattice distortion in M/HEAs remains a challenge. Moreover, the presumed random elemental mixing in M/HEAs has been questioned by X-ray and neutron studies, atomistic simulations, energy dispersive spectroscopy and electron diffraction, which suggest the existence of local chemical order in M/HEAs. However, direct experimental observation of the 3D local chemical order has been difficult because energy dispersive spectroscopy integrates the composition of atomic columns along the zone axes and diffuse electron reflections may originate from planar defects instead of local chemical order. Here, in this work, we determine the 3D atomic positions of M/HEA nanoparticles using atomic electron tomography and quantitatively characterize the local lattice distortion, strain tensor, twin boundaries, dislocation cores and chemical short-range order (CSRO). We find that the high-entropy alloys have larger local lattice distortion and more heterogeneous strain than the medium-entropy alloys and that strain is correlated to CSRO. We also observe CSRO-mediated twinning in the medium-entropy alloys, that is, twinning occurs in energetically unfavoured CSRO regions but not in energetically favoured CSRO ones, which represents, to our knowledge, the first experimental observation of correlating local chemical order with structural defects in any material. We expect that this work will not only expand our fundamental understanding of this important class of materials but also provide the foundation for tailoring M/HEA properties through engineering lattice distortion and local chemical order.

36 MATERIALS SCIENCE↗

Impact of air-exposure on the chemical and electronic structure ofZnO:Zn3N2 thin films

The chemical and electronic surface structure of ZnO:Zn3N2 ("ZnO:N") thin films with different N contents was investigated by soft x-ray emission spectroscopy. Upon exposure to ambient air (in contrast to storage in vacuum), the chemical and electronic surface structure of the ZnO:N films changes substantially. In particular, we find that the Zn3N2/(Zn3N2+ZnO) ratio decreases with exposure time and that this change depends on the initial N content. We suggest a degradation mechanism based on the reaction of the Zn3N2 content with atmospheric humidity.

36 MATERIALS SCIENCE↗

Chloro-Modified Magnetic Fe{sub 3}O{sub 4}@MCM-41 Core–Shell Nanoparticles for L-Asparaginase Immobilization with Improved Catalytic Activity, Reusability, and Storage Stability

This paper describes a new support that permits to efficient immobilization of L-asparaginase (L-ASNase). For this purpose, Fe{sub 3}O{sub 4} magnetic nanoparticles were synthesized and coated by MCM-41. 3-chloropropyltrimethoxysilane (CPTMS) was used as a surface modifying agent for covalent immobilization of L-ASNase on the magnetic nanoparticles. The chemical structure; thermal, morphological, and magnetic properties; chemical composition; and zeta potential value of Fe{sub 3}O{sub 4}@MCM-41-Cl were characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential thermal analysis (DTA), differential scanning calorimetry (DSC), vibrating sample magnetometer (VSM), scanning electron microscope (SEM), energy dispersive X-ray (EDX), X-ray diffraction patterns (XRD), and zeta-potential measurement. The immobilization efficiency onto Fe{sub 3}O{sub 4}@MCM-41-Cl was detected as 63%. The reusability, storage, pH, and thermal stabilities of the immobilized L-ASNase were investigated and compared to that of soluble one. The immobilized enzyme maintained 42.2% of its original activity after 18 cycles of reuse. Furthermore, it was more stable towards pH and temperature compared with soluble enzyme. The Michaelis–Menten kinetic properties of immobilized L-ASNase showed a lower V{sub max} and a similar K{sub m} compared to soluble L-ASNase. Immobilized enzyme had around 47 and 32.5% residual activity upon storage a period of 28 days at 4 and 25 °C, respectively. In conclusion, the Fe{sub 3}O{sub 4}@MCM-41-Cl@L-ASNase core–shell nanoparticles could successfully be used in industrial and medical applications.

60 APPLIED LIFE SCIENCES↗

Covalent Triazine Framework-Derived Membranes: Engineered Sol–Gel Construction and Gas Separation Application

Covalent triazine frameworks (CTFs) represent one of the most extensively studied organic networks characterized by graphitic π-conjugated structures linked by aza-fused rings, possessing unique features such as compositions of light elements (e.g., C, H, and N), porous architectures abundant heteroatom involvement, and extensively conjugated structures. In addition, the textural and chemical structures of CTFs could be engineered via synthesis control to accommodate diverse applications. CTF materials with notable characteristics, including plentiful (ultra-)micropores, high surface areas, and the presence of CO 2 -philic functional groups involving nitrogen (N), oxygen (O), and fluorine (F), hold great promise as potential candidates for anthropogenic CO 2 capture and sequestration (CCS) applications. However, the conventional high-temperature involved ionothermal procedures and the solution-based coupling pathway only afforded CTF materials in powder form, which is difficult to be processed toward membrane formation. Successful fabrication of CTF-derived membranes will rely on the development of alternative polymerization approaches as well as structural engineering to afford membrane architectures with controllable porosity distribution and active interaction sites with CO 2 benefiting the CO 2 separation procedure. In this Account, a demonstration of the latest progress in the development of CTF-derived membranes was provided. The CTF membranes were mainly synthesized via a superacid (e.g., CF 3 SO 3 H)-promoted sol–gel approach involving the polymerization of aromatic nitrile monomers. The formation of the triazine unit through the trimerization of cyano groups served as the cross-linkers, resulting in the creation of π-conjugated networks alongside the arenes present in the starting materials. The aromatic nitrile monomers with rigid and sterically hindered structures were required to afford CTF membranes with nanoporous architectures. The acidity of the superacid and reactivity of the aromatic monomers played critical roles in the polymerization efficiency. The monomer diversity and synthesis tunability endowed the introduction of CO 2 -philic functionalities (e.g., pyrazole and fluorine) within the CTF skeletons, and integration of ionic moieties was achieved by adopting FSO 3 H with stronger acidity as the catalyst and aromatic nitrile monomers with pyrazine structures. To ensure the successful construction of fluorinated CTF membranes, it is important to avoid any fluorines on the ortho-position of the cyano groups on the benzene ring. Through control over the monomers and reaction conditions, flexible, transparent, and insoluble CTF membranes could be fabricated. The sol–gel method could be further expanded to membrane fabrication through acetyl-to-benzene transformation through synthesis control. The mild oxidation-exfoliation-filtration method was also demonstrated to fabricate substrate-supported CTF membranes. The as-afforded membranes are well characterized to determine the structural features and provide information to study the structure-performance relationship. Here, the application of CTF membranes in CO 2 separation was summarized, focusing on the approaches being developed to enhance CO 2 uptake and separation performance. In addition to utilizing the pristine CTF membranes for gas separation, functionalized carbon molecular sieve membranes could be obtained from the pyrolysis of thermally stable CTF membrane precursors toward efficient CO 2 separation, benefiting from the abundant ultramicropores being created during the pyrolysis/decomposition procedure and involvement of CO 2 -philic functionalities such as fluorine and nitrogen-containing moieties. Based on these achievements, unsolved issues in CTF membrane-related fabrication and applications, including the potential solution approaches, have been proposed to advance the application of CTF membranes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the structure of poly(etheretherketone) (PEEK)

Annealed, hot pressed, and melt-quenched PEEK specimens have been analyzed by wide-angle X-ray diffraction. The analysis suggests, in part, that structural studies based on the reported similarity between the structure of PEEK and that reported for poly(p-phenylene oxide) are valid and may be extended to a structure more in keeping with the chemical structure of the material.

Wakelyn, N. T.↗

Diphenylpolyynes For Nonlinear Optical Devices

Several diphenylpolyyne compounds found to exhibit second-order nonlinear electric susceptibilities and chemical structures conducive to orientation in appropriate chemical environments. These features make new materials suitable for use in optical devices. Diphenylacetylene links give molecules rodlike characteristics making them amenable to orientation by suspension in liquid crystals. New molecules also have inherent liquid-crystalline properties enabling them to be oriented directly.

Stiegman, Albert E.↗

Resonant soft X-ray scattering for polymer materials

Resonant Soft X-ray Scattering (RSoXS) was developed within the last few years, and the first dedicated resonant soft X-ray scattering beamline for soft materials was constructed at the Advanced Light Source, LBNL. RSoXS combines soft X-ray spectroscopy with X-ray scattering and thus offers statistical information for 3D chemical morphology over a large length scale range from nanometers to micrometers. Using RSoXS to characterize multi-length scale soft materials with heterogeneous chemical structures, we have demonstrated that soft X-ray scattering is a unique complementary technique to conventional hard X-ray and neutron scattering. Its unique chemical sensitivity, large accessible size scale, molecular bond orientation sensitivity with polarized X-rays, and high coherence have shown great potential for chemically specific structural characterization for many classes of materials.

36 MATERIALS SCIENCE↗

“MS-Ready” structures for non-targeted high-resolution mass spectrometry screening studies

Chemical database searching has become a fxture in many non-targeted identifcation workfows based on highresolution mass spectrometry (HRMS). However, the form of a chemical structure observed in HRMS does not always match the form stored in a database (e.g., the neutral form versus a salt; one component of a mixture rather than the mixture form used in a consumer product). Linking the form of a structure observed via HRMS to its related form(s) within a database will enable the return of all relevant variants of a structure, as well as the related metadata, in a single query. A Konstanz Information Miner (KNIME) workfow has been developed to produce structural representations observed using HRMS (“MS-Ready structures”) and links them to those stored in a database. These MS-Ready structures, and associated mappings to the full chemical representations, are surfaced via the US EPA’s Chemistry Dashboard (https://comptox.epa.gov/dashboard/). This article describes the workfow for the generation and linking of ~700,000 MS-Ready structures (derived from ~760,000 original structures) as well as download, search and export capabilities to serve structure identifcation using HRMS. The importance of this form of structural representation for HRMS is demonstrated with several examples, including integration with the in silico fragmentation software application MetFrag. The structures, search, download and export functionality are all available through the CompTox Chemistry Dashboard, while the MetFrag implementation can be viewed at https://msbi.ipb-halle.de/MetFragBeta/.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exclusion of cosmic rays in protoplanetary disks. II. Chemical gradients and observational signatures

The chemical properties of protoplanetary disks are especially sensitive to their ionization environment. Sources of molecular gas ionization include cosmic rays (CRs), stellar X-rays, and short-lived radionuclides, each of which varies with location in the disk. This behavior leads to a significant amount of chemical structure, especially in molecular ion abundances, which is imprinted in their submillimeter rotational line emission. Using an observationally motivated disk model, we make predictions for the dependence of chemical abundances on the assumed properties of the ionizing field. We calculate the emergent line intensity for abundant molecular ions and simulate sensitive observations with the Atacama Large Millimeter/Sub-millimeter Array (ALMA) for a disk at D = 100 pc. The models readily distinguish between high ionization rates (ζ ≳ 10{sup –17} s{sup –1} per H{sub 2}) and below, but it becomes difficult to distinguish between low ionization models when ζ ≲ 10{sup –19} s{sup –1}. We find that H{sub 2}D{sup +} emission is not detectable for sub-interstellar CR rates with ALMA (6h integration), and that N{sub 2}D{sup +} emission may be a more sensitive tracer of midplane ionization. HCO{sup +} traces X-rays and high CR rates (ζ{sub CR} ≳ 10{sup –17} s{sup –1}), and provides a handle on the warm molecular ionization properties where CO is present in the gas. Furthermore, species like HCO{sup +}, which emits from a wide radial region and samples a large gradient in temperature, can exhibit ring-like emission as a consequence of low-lying rotational level de-excitation near the star. This finding highlights a scenario where rings are not necessarily structural or chemical in nature, but simply a result of the underlying line excitation properties.

79 ASTRONOMY AND ASTROPHYSICS↗

Preventing native oxide formation in niobium thin films through platinum encapsulation

Superconducting transmon qubits are a key technology in quantum computing, with niobium (Nb) widely used due to its favorable superconducting properties and compatibility with scalable fabrication. However, the performance of Nb-based qubits is hindered by two-level systems (TLS), which arise predominantly from native oxide layers at surfaces and interfaces. These oxides and suboxides form rapidly in air and contribute significantly to decoherence by introducing dielectric losses. While various mitigation strategies, including thermal-annealing, chemical-etching, and nitrogen plasma treatment, have been explored, many are challenging to integrate into large-scale manufacturing due to complexity and instability in ambient conditions. In this study, we investigate the structural, chemical, and superconducting properties of room-temperature sputtered Nb thin films grown on sapphire substrates. We focus on a surface protection strategy using noble metal encapsulation with platinum (Pt) to suppress oxides and reduce TLS-related losses. Structural and chemical characterization were performed using X-ray diffraction, X-ray photoelectron spectroscopy, and transmission electron microscopy. Superconducting properties were measured using a physical property measurement system. Results demonstrate that Pt encapsulation effectively suppresses surface oxidation and mitigates its detrimental impact on superconducting performance. In conclusion, this approach offers a promising path toward enhancing the coherence of Nb-based qubits while remaining compatible with scalable-fabrication processes.

36 MATERIALS SCIENCE↗