SEARCH · Engineering Papers

Results for “Change detection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Enhancement of the Curie temperature in single-crystalline ferromagnetic LaCrGe 3 by electron irradiation-induced disorder

LaCrGe 3 has attracted attention as a potential candidate for studies of quantum phase transitions in a ferromagnetic material. The application of pressure avoids a quantum critical point by developing a new magnetic phase. It was suggested that the disorder may provide an alternative route to a quantum critical point. We used low-temperature 2.5 MeV electron irradiation to induce relatively small amounts of pointlike disorder in single crystals of LaCrGe 3 . Irradiation leads to an increase of the resistivity at all temperatures with some deviation from the Matthiessen rule. Hall effect measurements show that electron irradiation does not cause any detectable change in the carrier density. Unexpectedly, the Curie temperature, T FM , increases with the increase of disorder from approximately 90 K in pristine samples up to nearly 100 K in the heavily irradiated sample, with a tendency towards saturation at higher doses. This effect is observed both in resistivity and magnetization measurements. Although the mechanism of this effect is not entirely clear, we conclude that it cannot be caused by effective “doping” or “pressure” due to electron irradiation. Finally, we suggest that disorder-induced broadening of a sharp peak in the density of states, D⁡(E), situated at E p = E F – 0.25 eV below the Fermi energy, E F , causes an increase in D⁡(E F ), leading to an enhancement of T FM in this itinerant ferromagnet.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2020

A Fully Automatic Method for Rapidly Mapping Impacted Area by Natural Disaster

Deep learning based change detection methods have achieved the state-of-the-art performance in several recent studies. However, such methods usually are supervised, and therefore a large number of training samples is often a requisite. Manually preparing those training samples is not only expensive but also time-consuming, which does not fit the need of rapidly mapping the impacted area caused by nature disaster for further rescue mission and damage assessment. In this study, a fully automatic method was proposed to address the issue by automating training sample generation for mapping the impacted area caused by nature disaster. We used the 2011 tornado event in Joplin, Missouri, US, as an example of its application. The generated impacted area map was both visually and quantitatively evaluated against the ground truth data collected by US Federal Emergency Management Agency (FEMA). The results show that the map matches well with the FEMA ground truth data with 86% of major-damaged and destroyed buildings identified by FEMA on the ground also detected by this fully automatic framework using very high resolution (VHR) satellite images.

Liu, Tao↗

DOE OSTI2023

Scaling Automatic Vector Data Alignment to Satellite Imagery

Given the tremendous volume of accessible Earth Observation (EO) data, there is a need to develop scalable Geospatial Artificial Intelligence (GeoAI) solutions for time-sensitive applications. Scalability in this context refers to rapidly processing large-scale EO data using high performance computing resources. Accurate mapping of the built environment from remote sensing (RS) imagery has been one of the crucial components in GeoAI workflows for a wide spectrum of humanitarian applications. Derived vector data of built environment is often leveraged for disaster preparedness and response activities. However, factors such as differences in ortho-rectification, atmospheric conditions and human error, results in spatial misalignment between vector data and the timely available RS imagery. Model training for downstream tasks such as object detection, change analysis, etc., is negatively impacted due to such spatial misalignment. Although there has been progress towards automatic alignment of vector data, the lack of scalability remains an open research challenge. This paper proposes to leverage parallel computing to optimize an automatic vector data alignment workflow. It further employs CPU-level multi-core parallelism for improving the performance of the workflow for scalable built environment mapping. We report observations and discuss findings from the preliminary experiments performed on the Summit Supercomputer.

Potnis, Abhishek↗

DOE OSTI2024

Introducing SpaceNet 9 - Cross-Modal Satellite Imagery Registration for Natural Disaster Responses

Computer vision algorithms are increasingly leveraged to accelerate geospatial analysis for disaster response and recovery. As the diversity of remote sensing imagery grows with optical, SAR, and other modalities, a perquisite for analytics is cross-modal image registration. There is a high potential to harness computer vision for this pre-processing requirement toward enabling downstream analytics such as heterogeneous change detection, automated feature extraction, and data fusion. Advancement in these areas has the potential to simplify data wrangling tasks and further accelerate disaster response timelines. The SpaceNet 9 challenge (launching in mid-2024) focuses on addressing the cross-modal image registration problem and demonstrating the utility of such modules on earthquake impacted scenarios. This paper describes the motivation for the SpaceNet 9 and provides a first overview of the dataset, the baseline algorithm, and implications for seeking cross-modal image registration in Earth observation. Code is available at https://github.com/SpaceNetChallenge/SpaceNet9.

Hansch, Ronny↗

DOE OSTI2025

Dynamic molecular architecture of the synaptonemal complex

During meiosis, pairing between homologous chromosomes is stabilized by the assembly of the synaptonemal complex (SC). The SC ensures the formation of crossovers between homologous chromosomes and regulates their distribution. However, how the SC regulates crossover formation remains elusive. We isolated an unusual mutation in Caenorhabditis elegans that disrupts crossover interference but not SC assembly. This mutation alters the unique C terminal domain of an essential SC protein, SYP-4, a likely ortholog of the vertebrate SC protein SIX6OS1. We use three-dimensional stochastic optical reconstruction microscopy (3D-STORM) to interrogate the molecular architecture of the SC from wild-type and mutant C. elegans animals. Using a probabilistic mapping approach to analyze super-resolution image data, we detect changes in the organization of the synaptonemal complex in wild-type animals that coincide with crossover designation. We also found that our syp-4 mutant perturbs SC architecture. Our findings add to growing evidence that the SC is an active material whose molecular organization contributes to chromosome-wide crossover regulation.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

Modes of Variability in E3SM and CESM Large Ensembles

An adequate characterization of internal modes of climate variability (MoV) is a prerequisite for both accurate seasonal predictions and climate change detection and attribution. Assessing the fidelity of climate models in simulating MoV is therefore essential; however, doing so is complicated by the large intrinsic variations in MoV and the limited span of the observational record. Large ensembles (LEs) provide a unique opportunity to assess model fidelity in simulating MoV and quantify intermodel contrasts. Here, in this work, these goals are pursued in four recently produced LEs: the Energy Exascale Earth System Model (E3SM) versions 1 and 2 LEs, and the Community Earth System Model (CESM) versions 1 and 2 LEs. In general, the representation of global coupled modes is found to improve across successive E3SM and CESM versions in conjunction with the fidelity of the base state climate while the patterns of extratropical modes are well simulated across the ensembles. Various persistent shortcomings for all MoV are however identified and discussed. The results both demonstrate the successes of these recent model versions and suggest the potential for continued improvement in the representation of MoV with advances in model physics.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Chlorophyll fluorescence imaging captures photochemical efficiency of grain sorghum (Sorghum bicolor) in a field setting

Abstract Background Photosynthesis is one of the most important biological reactions and forms the basis of crop productivity and yield on which a growing global population relies. However, to develop improved plant cultivars that are capable of increased productivity, methods that can accurately and quickly quantify photosynthetic efficiency in large numbers of genotypes under field conditions are needed. Chlorophyll fluorescence imaging is a rapid, non-destructive measurement that can provide insight into the efficiency of the light-dependent reactions of photosynthesis. Results To test and validate a field-deployed fluorescence imaging system on the TERRA-REF field scanalyzer, leaves of potted sorghum plants were treated with a photosystem II inhibitor, DCMU, to reduce photochemical efficiency (F V /F M ). The ability of the fluorescence imaging system to detect changes in fluorescence was determined by comparing the image-derived values with a handheld fluorometer. This study demonstrated that the imaging system was able to accurately measure photochemical efficiency (F V /F M ) and was highly correlated ( r = 0.92) with the handheld fluorometer values. Additionally, the fluorescence imaging system was able to track the decrease in photochemical efficiency due to treatment of DCMU over a 7 day period. Conclusions The system’s ability to capture the temporal dynamics of the plants’ response to this induced stress, which has comparable dynamics to abiotic and biotic stressors found in field environments, indicates the system is operating correctly. With the validation of the fluorescence imaging system, physiological and genetic studies can be undertaken that leverage the fluorescence imaging capabilities and throughput of the field scanalyzer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Geometry-driven modeling of electron localization in InAs/GaAs double quantum dots

The coupled electronic states in two-dimensional (2D) and three-dimensional (3D) double quantum dot (DQD) systems are investigated using a phenomenological model applied to InAs/GaAs heterostructures. The single-band k • p effective potential approach previously proposed by our group is employed to numerically calculate the energy spectrum and spatial localization of a single electron, serving as an indicator of the coupling strength within the binary system. For identical quantum dots (QDs) in a DQD, the electronic states exhibit ideal coherence. We systematically vary the DQD geometry and the strength of the confinement potential (via an applied electric field) to examine the effects of symmetry breaking and the sensitivity of electron localization in both identical and nearly identical DQDs. Our results show that coherence in DQDs is highly sensitive to these subtle variations. This sensitivity can be harnessed to detect changes in the surrounding environment, such as fluctuations in chemical or electrical properties that affect the DQD system.

electron localization↗

DOE OSTI2020

Residue Specific Characterization of Electrostatics, Conformational Heterogeneity, and Dynamics of Electron Transfer Proteins with Linear and Nonlinear Infrared Spectroscopy. Final Report

The goal of this research project was to further our understanding of biological electron transfer through the development and application of new methods for studying proteins and their complexes with high spatial and temporal detail. The approach was based on incorporation of reporter bonds with distinct vibrational frequencies at specific locations in proteins and their characterization through the interaction of the bonds with pulses of infrared light. The project focused on the proteins plastocyanin (Pc) and cytochrome (cyt) f, two electron transfer partners in photosynthesis. The first thrust of the project was the incorporation of carbon deuterium bonds as non-perturbative probes at a ligand to the copper ion of Pc and their use to detect changes in the bonding due to the number of electrons at the metal and how the bonding changes upon association with cyt f. Toward developing more advanced approaches to characterize proteins, we incorporated a stronger reporter, the cyano group of cyanophenylalanine, at several locations in Pc and measured the frequency dynamics in the absence and presence of cyt f. The acquired data improved the current model for the protein complex. Notably, the data indicated that the majority of the population is involved in a loosely bound complex, providing insight into the nature of the ensembles formed by electron transfer protein complexes that is not available via other approaches. In addition to learning about the protein complex, we made strides toward developing and improving the new experimental approach to study highly dynamic behaviors of proteins.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2020

Investigating the Thermal Behavior of Polymers by Modulated Differential Scanning Calorimetry (MDSC) – A Review

Modulated Differential Scanning Calorimetry (MDSC) is a thermoanalytical technique that detects changes in intrinsic heat flow by subjecting a material to two simultaneous heating rates, one linear and one sinusoidal. In this way, MDSC overcomes the limitations of its predecessor- conventional DSC-allowing for complex and overlapping thermal transitions to be resolved without sacrificing sensitivity. The advantages of MDSC lend credence to its extensive use in applications that require superior analytical accuracy, such as the food and drug industries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Analytical Functions for 200 West Pump-and-Treat SCADA Sensor Data

Historical operations at the U.S. Department of Energy’s Hanford Site included disposal of waste fluids to the subsurface in the 200 West Area on the Hanford Central Plateau. Subsequent infiltration of fluids has resulted in groundwater contamination with carbon tetrachloride, nitrate, uranium, technetium-99, and other contaminants. A pump-and-treat (P&T) system, with an extraction/injection well network and an aboveground treatment plant, was implemented as part of interim and final remedies in the 200 West area. The HYPATIA single-page web application (part of the SOCRATES suite) is being developed to provide access to and analysis of chemistry and treatment facility sensor data for this 200 West P&T system. For the web application, analytical algorithms were developed to perform summing, differencing, smoothing, outlier detection, change-point detection, mass flow rate, and injectivity calculations on the data. Candidate algorithms were identified and tested, with the best-performing algorithms then assembled for implementation in HYPATIA. Because HYPATIA is hosted on the Amazon Web Services (AWS) cloud computing platform, algorithms were implemented in a back-end AWS Lambda function that can be called by the HYPATIA front end. The Lambda function applies the requested data processing to specified data via functions written in R, Python, and JavaScript. Development, testing, and review of the data analysis algorithms was completed under an NQA-1 quality program. This new HYPATIA functionality will provide information to support site decisions regarding P&T system performance and optimization.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2021

Out-of-Pile Test of LVDT-Based Creep Test Rig at PWR Prototypical Conditions

New and improved materials are being considered to support the existing nuclear reactors and future next-generation reactors. The materials can significantly degrade and limit their properties in harsh reactor environments. To accurately understand the material’s degradation, real-time data is required under prototypic-irradiation conditions. Additionally, understanding the creep behavior of materials under harsh environments is essential for an evaluation of safety concerns. To provide these capabilities, the Idaho National Laboratory’s (INL’s) High Temperature Test Laboratory (HTTL) has developed several instrumented test rigs to obtain real-time data from specimens in well-controlled pressurized water reactor (PWR) coolant conditions in the Materials and Test Reactors (MTRs). This technical report focuses on INL’s efforts to evaluate and enhance the former prototype creep test rig that relied on linear variable differential transformers in laboratory settings. Specifically, the test rig is capable of detecting changes in the length of tensile specimen, which is useful for measuring thermal expansion and creep loading.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2021

Development of Real-Time, In-pile Creep Test Rigs for Characterizing the Structural Materials of Nuclear Components

New and improved materials are being considered for supporting both existing and next-generation nuclear reactors. Reactor materials can significantly degrade with time, thus limiting or altering their properties in harsh reactor environments. To accurately understand such material degradation, real-time data obtained under prototypic irradiation conditions are required. In particular, understanding the creep behavior of materials exposed to irradiation and elevated temperatures is essential for safety concern evaluations. To provide these capabilities, Idaho National Laboratory (INL)’s High Temperature Test Laboratory (HTTL) developed several instrumented test rigs for obtaining real-time data from specimens in well-controlled pressurized-water reactor (PWR) coolant conditions at the Materials Test Reactor. This technical report focuses on INL’s efforts to evaluate and enhance the former creep test rig prototype that relied on linear variable differential transformers in laboratory settings. Specifically, the test rig can detect changes in the length of creep specimens, which is useful for measuring thermal expansion and creep deformation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2023

Threat Agnostic Virulence Assessment of Pathogens

Virulence assessment of new, emerging, and engineered pathogens is critical to mounting an appropriate response to a biothreat agent. The capacity of the pathogen to colonize human and harm tissues must be characterized to understand pathogenicity pathways and optimize diagnosis and treatment of resulting disease. Respiratory pathogens are of interest because they can have high transmissibility rates, as observed with the SARS-CoV-2 virus, the causative agent of Covid-19. Current technologies are insufficient to assess threats due to their reliance on systems with only one cell type and on sequencing the pathogen. However, it is known that sequence is not an accurate predictor of function, and sequencing can be unreliable for newly emerged or engineered pathogens. An ideal system would consist of relevant epithelial cell types and an assay sensitive enough to detect changes in host responses that do not rely on DNA sequencing. We chose a system consisting of host lung epithelial cells that can be used to assess the virulence of unknown respiratory pathogens. We interrogated pathogens using this model and assess features of pathogenicity. Our objective is to leverage PNNLs strengths in tissue engineering and proteomics capabilities to build a multiple reaction monitoring (MRM) or parallel reaction monitoring (PRM) liquid chromatography-tandem mass spectrometry assay for human host cell proteins whose abundance is influenced by infection. These responses can were then assessed for relative virulence using pathogen agnostic signatures. When confronted with a pathogen, cells activate dedicated signaling pathways, typically through phosphorylation of regulatory proteins and downstream activation of host cell networks.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

Homomorphic Encryption for Electrical Metering Aggregation: Protecting the Privacy of Building Tenants

Electrical meters are devices that measure consumer electricity usage. The data collected by these meters is necessary for utility billing and electrical grid management but can also be used to assess the environmental impact of buildings. Prior research has found that unprotected metering data could potentially be used to infer some information about the behaviors of building tenants by detecting changes in electricity usage. For example, a period of low electricity usage could suggest that the tenants are not in the building. As smart metering becomes more common, there is a growing need for data privacy protections for metering data that do not negatively impact the quality and availability of data used for energy management and billing applications. To identify potential solutions, we developed a Python-based data aggregation platform to analyze the potential efficacy of privacy-enhancing technologies for energy metering applications. This platform aggregates groups of metering sites into virtual buildings, which could potentially detach changes in electrical activity from individual tenants, making it more difficult to track the activity of a specific tenant. To further protect data during analysis, this project utilizes homomorphic encryption as part of its initial approach. Homomorphic encryption offers a means of protecting energy consumption data while permitting mathematical operations to be performed without the need to know the data contents. This allows for data to be processed into usable statistics without revealing energy consumption information. A series of homomorphic encryption libraries were evaluated to determine their applicability and limitations in the context of metering data. The use of these techniques may help to reassure consumers and encourage further adoption of smart grid infrastructure.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2026

Quantifying the Operational Impacts of Cyber Events on Enterprise Network Environments

The "Quantifying the Operational Impacts of Cyber Events on Enterprise Network Environments" Feasibility Study addressed the question: Can an existing (novel) class of network characterization and change detection algorithms previously developed at LLNL for internal enterprise datasets, be effectively applied to assess and measure the analytic value of features derived from datasets composed of passively collected RF and wireless network data?

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

Best Practices for Grid Communications

As the grid evolves, the communications architecture will need to evolve with it. That architecture affords a structured means by which the evolving complexities of the modern electric grid can be managed. This document provides best practices that can be implemented in the grid of today and evolve towards the grid and grid architecture of the future. The evolving grid and its control communications increasingly rely on commercial communications providers and a variety of technologies, from wireless (e.g., 5G, microwave, Wi-Fi) to wireline (fiber, copper) to radio communications (P25, other repeater-based systems), and all these communications systems rely on electric power. A reliable and resilient grid must account for this complex set of interdependencies in its planning activities, especially those involving restoration and recovery. The participation of all relevant parties in both planning and exercising of plans can prevent unexpected conditions that impede the reliable operation and recovery of the grid. Best practices for grid communications include using a Network Management System to document the operational state, define and monitor baselines, detect changes, and accelerate response to abnormalities. If transitioning from SONET to IP/packet-based systems, translating grid requirements into communications requirements for latency, bandwidth and throughput, IP packet delay variation, packet loss, and availability should inform and drive technology planning and selection as well as that communication system’s Quality of Service (QoS) policies and Service Level Agreements (SLAs). Secure and reliable timing is another key component of a reliable and resilient grid that can operate through adverse events. A trusted internal NTP configuration, an integrated and diverse timing delivery system, optimizing the timing architecture based on the transport technologies of the communications system, and using established standards can deliver the level of timing accuracy required by a range of time-sensitive power system applications.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2023

Battery data integrity and usability: Navigating datasets and equipment limitations for efficient and accurate research into battery aging

A tremendous commitment of resources is needed to acquire, understand and apply battery data in terms of performance and aging behavior. There are many state of performance (SOP) and state of health (SOH) metrics that are useful to guide alignment of batteries to end-use, yet how these metrics are measured or extracted can make the difference between usable, valuable datasets versus data that lacks the necessary integrity to meet baseline confidence levels for SOP/SOH quantification. This work will speak to 1) types of data that support SOP and SOH evaluations on mechanistic terms, 2) measurement conditions needed to assure high data integrity, 3) equipment limitations that can compromise data high fidelity, and 4) the impact of cell polarization on data quality. A common goal in battery research and field use is to work from a data platform that supports economical paths of data capture while minimizing down-time for battery diagnostics. An ideal situation would be to utilize data obtained during normal daily use (“pulses or cycles of convenience”) without stopping the daily duty cycles to perform dedicated SOP/SOH diagnostic routines. However, difficulties arise in trying to make use of daily duty cycle data (denoted as cycle-by-cycle, CBC) that underscores the need for standardization of conditions: temperature and duty cycles can vary over the course of a day and throughout a week, month and year; polarization can develop within an immediate cycle and throughout successive cycles as a hysteresis. If CBC data is envisioned as a data source to determine performance and aging trends, it should be recognized that polarization is a frequent consequence of CBC and thus makes it difficult to separate reversible and irreversible components to metrics such as capacity loss and resistance increase over aging. Since CBC conditions can have a major impact on data usability, we will devote part of this paper to CBC data conditioning and management. Differential analyses will also be discussed as a means to detect changing trends in data quality. Our target cell chemistries will be lithium-ion types NMC/graphite and LMO/LTO.

25 ENERGY STORAGE↗