Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COPRECIPITATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Synthesis, characterization and electrochemical studies of nanostructured CaWO{sub 4} as platinum support for oxygen reduction reaction

Highlights: • Nanostructured CaWO{sub 4} was fabricated by co-precipitation method. • Platinum was electrodeposited onto the surface prepared nanostructured CaWO{sub 4}. • Pt/CaWO{sub 4}-graphite demonstrate good oxygen reduction reaction activity. - Abstract: In the present work, we employed nanostructured calcium tungstate as a supporting material for platinum, a well-known electrocatalyst for oxygen reduction. The co-precipitation method has been utilized to synthesize nanostructured calcium tungstate from aqueous solution. The structure and morphology of the obtained CaWO{sub 4} were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Preparation of the Pt/CaWO{sub 4}-graphite catalyst was carried out by electrodeposition of Pt onto the surface of CaWO{sub 4}/graphite electrode. The physical properties of the catalyst were determined by scanning electron microscopy analysis and energy dispersive X-ray (SEM/EDX). The electrochemical activity of the Pt/CaWO{sub 4}-graphite for the oxygen reduction reaction (ORR) was investigated in acid solution by cyclic voltammetry measurements, linear sweep voltammetry, and electrochemical impedance spectroscopy. The results revealed that the Pt/CaWO{sub 4}-graphite has higher electrocatalytic activity for oxygen reduction in comparison with Pt/graphite catalyst.

36 MATERIALS SCIENCE↗

Facile synthesis and electrochemical performance of Co{sub 2}SnO{sub 4}/Co{sub 3}O{sub 4} nanocomposite for lithium-ion batteries

Graphical abstract: TEM of Co{sub 2}SnO{sub 4}/Co{sub 3}O{sub 4} composite and the discharge curves of pure Co{sub 3}O{sub 4}, pure Co{sub 2}SnO{sub 4} and Co{sub 2}SnO{sub 4}/Co{sub 3}O{sub 4} composite. - Highlights: • Novel Co{sub 2}SnO{sub 4}/Co{sub 3}O{sub 4} composite has been prepared by simple co-precipitation method. • Small spherical nanocrystals adhering to the surface of large polyhedral particles. • Formation mechanism is relate to solubility of Sn(OH){sub 6}{sup 2−} in high concentration OH{sup −} . • The composite shows better electrochemical performance than Co{sub 2}SnO{sub 4} and Co{sub 3}O{sub 4} - Abstract: A novel dispersed structure Co{sub 2}SnO{sub 4}/Co{sub 3}O{sub 4} composite has been successfully synthesized by a conventional co-precipitation method with certain amount of NaOH concentration. The obtained composite exhibits dispersed structure with small spherical nanocrystals adhering to the surface of large polyhedral particles, which has been studied as an anode material in lithium-ion battery. Galvanostatic charge–discharge and cyclic voltammetry has been conducted to measure the electrochemical properties of the material. The results show that Co{sub 2}SnO{sub 4}/Co{sub 3}O{sub 4} composite demonstrates good reversible capacity of 702.5 mA h g{sup −1} after 50 cycles at a current density of 100 mA h g{sup −1}, much better than that of pure Co{sub 3}O{sub 4} (375.1 mA h g{sup −1}) and pure Co{sub 2}SnO{sub 4} (194.1 mA h g{sup −1}). This material also presents improved rate performance with capacity retention of 71.1% when the current ranges from 100 mA g{sup −1} to 1000 mA g{sup −1}. The excellent electrochemical performance of the as-prepared dispersed structure Co{sub 2}SnO{sub 4}/Co{sub 3}O{sub 4} composite could be attributed to the good dispersibility of nanoparticles which can effectively alleviate the volume expansion and improve the conductivity, thus enhance the cycling stability.

36 MATERIALS SCIENCE↗

Ferrous sulfate based low temperature synthesis and magnetic properties of nickel ferrite nanostructures

Highlights: • Novel low temperature synthesis of nickel ferrite nanoparticles. • Comparison with two conventional synthesis techniques including hydrothermal method. • XRD results confirm the formation of crystalline nickel ferrites at 110 °C. • Superparamagnetic particles with applications in drug delivery and hyperthermia. • Magnetic properties superior to conventional methods found in new process. - Abstract: We report a simple, low temperature and surfactant free co-precipitation method for the preparation of nickel ferrite nanostructures using ferrous sulfate as the iron precursor. The products obtained from this method were compared for their physical properties with nickel ferrites produced through conventional co-precipitation and hydrothermal methods which used ferric nitrate as the iron precursor. X-ray diffraction analysis confirmed the synthesis of single phase inverse spinel nanocrystalline nickel ferrites at temperature as low as 110 °C in the low temperature method. Electron microscopy analysis on the samples revealed the formation of nearly spherical nanostructures in the size range of 20–30 nm which are comparable to other conventional methods. Vibrating sample magnetometer measurements showed the formation of superparamagnetic particles with high magnetic saturation 41.3 emu/g which corresponds well with conventional synthesis methods. The spontaneous synthesis of the nickel ferrite nanoparticles by the low temperature synthesis method was attributed to the presence of 0.808 kJ mol{sup −1} of excess Gibbs free energy due to ferrous sulfate precursor.

36 MATERIALS SCIENCE↗

Photocatalytic O{sub 2} evolution from water over Zn–Cr layered double hydroxides intercalated with inorganic anions

Graphical abstract: The photocatalytic activity of Zn–Cr LDHs intercalated with various inorganic anions was studied by O{sub 2} evolution from aqueous solution of AgNO{sub 3} as a sacrificial agent. All the prepared LDHs showed photocatalytic activity under either UV and/or visible light irradiation. The interlayer anions affected the photocatalytic activity of the LDHs. - Highlights: • Zn–Cr layered double hydroxides intercalated with inorganic anions were synthesized. • Photocatalytic activity of the LDHs was studied by O{sub 2} evolution. • All the prepared LDHs showed photocatalytic activity under either UV and/or visible light irradiation. • The interlayer anions affected the photocatalytic activity of the LDHs. - Abstract: Zn–Cr layered double hydroxides (LDHs) intercalated with inorganic anions (CO{sub 3}{sup 2−}, Cl{sup −}, SO{sub 4}{sup 2−} and NO{sub 3}{sup −}) were synthesized by the co-precipitation method and the anion exchange process. The photocatalytic activity of the LDHs was studied by O{sub 2} evolution from aqueous solution of AgNO{sub 3} as a sacrificial agent. All the prepared LDHs showed photocatalytic activity under either UV and/or visible light irradiation. Besides, the interlayer anions affected the photocatalytic activity of the LDHs. After irradiation, Ag particles were formed on the LDHs by accepting the electrons generated during the photocatalytic reaction.

36 MATERIALS SCIENCE↗

Luminescence properties and electronic structure of Ce{sup 3+}-doped gadolinium aluminum garnet

Highlights: • The luminescence properties of Ce{sup 3+} ions in (Y, Gd){sub 3}Al{sub 5}O{sub 12} are analyzed. • The Gd{sup 3+} → Y{sup 3+} substitution leads to increasing of Ce{sup 3+} noncubic crystal field splitting parameter. • The excitation spectra for the Ce{sup 3+} emission in GdAG contain bands at 6.67, 7.75, and 9.76 eV. • These features are due to the Ce{sup 3+}-bound exciton formation and O 2p → Al 3s, 3p transitions. • Contributions from Al atoms to the conduction-band density of states are quite essential. - Abstract: Yttrium-gadolinium aluminum garnets (YGdAG) doped with Ce{sup 3+} ions have been prepared by co-precipitation method. The luminescent properties of Ce{sup 3+} ions in Gd{sub 3(1−x)}Ce{sub 3x}Al{sub 5}O{sub 12} (x = 0.01) have been studied upon excitation in the 2–20 eV region. The substitution of Gd{sup 3+} for Y{sup 3+} in the garnet structure results in broadening the emission band and shifting its maximum towards the longer wavelengths. It was found that in addition to the 4f → 5d excitation bands of Ce{sup 3+} ions, the excitation spectra for the Ce{sup 3+} emission contain bands at 6.67, 7.75, and 9.76 eV. These bands are attributed to the Ce{sup 3+}-bound exciton formation and O 2p → Al 3s, 3p transitions, respectively. Although gadolinium states dominate near the bottom of the conduction band of Gd{sub 3}Al{sub 5}O{sub 12}, contributions from Al{sub tetr} and Al{sub oct} atoms to the conduction-band density of states are evaluated as quite essential.

36 MATERIALS SCIENCE↗

Structural and magnetic properties of La{sub 1−x}Ce{sub x}Fe{sub 1−x}Cr{sub x}O{sub 3} orthoferrite prepared by co-precipitation method

Graphical abstract: TEM micrographs of La{sub 1−x}Ce{sub x}Fe{sub 1−x}Cr{sub x}O{sub 3} for x = 0.0. - Highlights: • The composition of La{sub 1−x}Ce{sub x}Fe{sub 1−x} Cr{sub x}O{sub 3} was prepared by co-precipitation method. • X-ray diffraction showed orthorhombic structure with space group Pnma. • With increasing Ce and Cr content, a decrease of the unit cell volume. • Enhancement in the coercivity (H{sub c}) with increasing Ce and Cr content. • Reduction of M{sub s} and M{sub r} up to x = 0.15 and increases with further increases of x. - Abstract: Nanocrystalline orthoferrites with the composition of La{sub 1−x}Ce{sub x}Fe{sub 1−x} Cr{sub x}O{sub 3} where (x = 0, 0.1, 0.15 and 0.2) were prepared by co-precipitation method. The structural and magnetic properties of the La{sub 1−x}Ce{sub x}Fe{sub 1−x}Cr{sub x}O{sub 3} system have been investigated. X-ray diffraction showed the formation of orthorhombic structure with space group Pnma for different compositions. With increasing Ce and Cr content, lattice parameters a and c were found to decrease while b increases, resulting in a decrease of the unit cell volume. The crystallite size was calculated from XRD data and compared with that obtained from TEM micrographs. Vibrating sample magnetometer measurements reveal an enhancement in the coercivity (H{sub c}) with increasing Ce and Cr content and reduction of saturation magnetization (M{sub s}) and remnant magnetization (M{sub r}) up to x = 0.15 and increases with further increases of x. The magnetic susceptibility measurements vs. temperature showed canted-antiferromagnetic (AFM) in which the Neel temperature is increasing with Ce and Cr content.

36 MATERIALS SCIENCE↗

Annealing effect on the structural and magnetic properties of the CuAl{sub 0.6}Cr{sub 0.2}Fe{sub 1.2}O{sub 4} nano-ferrites

Graphical abstract: Mössbauer spectra of the as-prepared (AP) and annealed CuAl{sub 0.6}Cr{sub 0.2}Fe{sub 1.2}O{sub 4} samples. - Highlights: • As-prepared Cu–Al–Cr nano-ferrite samples were annealed at different temperatures T{sub A}. • Sample structure was transformed from cubic to tetragonal by JTE at 1000 °C. • Spontaneous and saturation magnetizations showed similar behavior against T{sub A}. • The deduced parameters showed dependence on T{sub A} and proved their affect by JTE. • Spontaneous magnetization proved dependence on crystallite size. - Abstract: Amounts of the as-synthesized CuAl{sub 0.6}Cr{sub 0.2}Fe{sub 1.2}O{sub 4} nanoparticles by the chemical co-precipitation method were annealed for 4 h at one of the temperatures T{sub A} = 300, 500, 600, 800 and 1000 °C for each. The techniques used for characterizing the samples were X-ray diffractions, infrared (IR) and Mössbauer spectroscopy and vibrating sample magnetometer. This study proved single-phase cubic structure of the samples annealed at T{sub A} ≤ 800 °C and tetragonal structure of the sample annealed at 1000 °C. The cubic-to-tetragonal structure transformation was attributed to the tetragonal distortion by Jahn–Teller effect (JTE) of Cu{sup 2+} ions. This study revealed that all deduced parameters were affected by JTE, whereas the crystallite size, lattice parameters, strain, threshold frequency, force constants, Debye temperature and stiffness constant were dependent on T{sub A}. IR absorption band positions and intensities were dependent on T{sub A} and proved the existence of Fe{sup 2+}, Fe{sup 4+} and Cr{sup 4+} ions in the crystal sublattices. The spontaneous and saturation magnetization and hyperfine magnetic field of the tetrahedral and octahedral sites were deduced and discussed as functions of T{sub A}.

36 MATERIALS SCIENCE↗

Synthesis, characterization and magnetic property of maghemite (γ-Fe{sub 2}O{sub 3}) nanoparticles and their protective coating with pepsin for bio-functionalization

Highlights: • Maghemite nanoparticles were prepared by a modified co-precipitation method. • Nanoparticles were then successfully coated with pepsin for bio-functionlization. • XRD and Mössbauer spectra confirmed the maghemite phase of the nanoparticles. • Magnetic data were analysed to evaluate particle size, anisotropy etc. - Abstract: Maghemite nanoparticles (γ-Fe{sub 2}O{sub 3}) are prepared by co-precipitation method. To obtain bio-functionalized magnetic nanoparticles for magnetically controlled drug delivery, the prepared nanoparticles are successfully coated with pepsin, a bio-compatible polymer and digestive enzyme. Crystallographic phase of the nanoparticles is confirmed by X-ray diffractograms (XRD), high resolution transmission electron microscopy (HRTEM) and {sup 57}Fe Mössbauer spectrometry. The average size of nanoparticles/nanocrystallites is estimated from the (3 1 1) peak of the XRD pattern using Debye–Scherrer formula. Results of HRTEM of coated and bare samples are in good agreement with those extracted from the XRD analysis. The dynamic magnetic properties are observed and different quantities viz., coercive field, magnetization, remanence, hysteresis losses etc., are estimated, which confirmed the presence of superparamagnetic relaxation of nanoparticles. Mössbauer spectra of the samples recorded at both 300 and 77 K, confirmed that the majority of particles are maghemite together with a very small fraction of magnetite nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electrochemical studies of CNT/Si–SnSb nanoparticles for lithium ion batteries

Highlights: • Si added SnSb and CNT exhibits very low particle size of below 30 nm • A strong PL quenching due to the addition of Si to SnSb. • Electrochemical studies show CNT added SnSb shows good capacity retention. - Abstract: Nano-structured SnSb, SnSb–CNT, Si–SnSb and Si–SnSb–CNT alloys were synthesized from metal chlorides of Sn, Sb and Si via reductive co-precipitation technique using NaBH{sub 4} as reducing agent. The as prepared compounds were characterized by various techniques such as X-ray diffraction (XRD), scanning electron microscope (SEM), Raman, Fourier transform infra-red (FTIR) and photoluminescence (PL) spectroscopy. The electrochemical performances of the compounds were characterized by galvanostatic cycling (GC) and cyclic voltammetry (CV). The Si–SnSb–CNT compound shows a high reversible capacity of 1200 mAh g{sup −1}. However, the rapid capacity fading was observed during cycling. In contrast, SnSb–CNT compound showed a high reversible capacity of 568 mAh g{sup −1} at 30th cycles with good cycling stability. The improved reversible capacity and cyclic performance of the SnSb–CNT compound could be attributed to the nanosacle dimension of SnSb particles and the structural advantage of CNTs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Improving thermal and electrochemical performances of LiCoO{sub 2} cathode at high cut-off charge potentials by MF{sub 3} (M=Ce, Al) coating

Highlights: • Fluoride metal is successfully coated on the surface of LiCoO{sub 2}. • Easy and scalable method is adopted for the synthesis of coated-LiCoO{sub 2}. • Appropriate amount of AlF{sub 3} or CeF{sub 3} is beneficial to reduce cation disorder. • The electrochemical performances of coated LiCoO{sub 2} is significantly enhanced at higher potential (cycling efficiency and reversible capacity). • The coated cathode exhibits excellent thermal stability highlighted by calorimetric technique. - Abstract: Surface coating of LiCoO{sub 2} remained one of the efficient methods to enhance its electrochemical and thermal performances, especially at high cut-off potential. In this work, MF{sub 3} (M = Ce, Al) coated LiCoO{sub 2} was synthesized via co-precipitation method followed by a solid state reaction at 400 °C. The morphology and structure of the modified cathode material were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and transmission electron microscopy (TEM). The results show that the fluoride compound MF{sub 3} is successfully coated on the surface of LiCoO{sub 2} cathode particles with an average layer thickness about 12 nm and 40 nm for AlF{sub 3} and CeF{sub 3}, respectively. The electrochemical tests show that the AlF{sub 3}-coating layer significantly enhances the cycling performance of LiCoO{sub 2} cathode material, even at high cut-off potential. While the bare LiCoO{sub 2} cathode displays fast fading at 4.6 V vs. Li{sup +}/Li cutoff potential, the surface-modified electrode exhibits the great capacity of 160 mAh g{sup −1} with excellent capacity retention on several cycles. We concluded that the electrochemical and the thermal enhancement at high potential are ascribed to the presence of MF{sub 3} coating layer which prevent the side reaction during the charge discharge process, alleviate the attack by the acidic electrolyte and reduce the damage of electrode structure.

36 MATERIALS SCIENCE↗

Origin of giant dielectric constant and conductivity behavior in Zn{sub 1−x}Mg{sub x}O (0 ≤ x ≤ 0.1) ceramics

Highlights: • Mg doped zinc oxide ceramics were fabricated by co-precipitation/solid state reaction. • MZO ceramics shown a Debye type and colossal dielectric response. • Physical absorption of atmospheric water vapor contributes these high permittivity. • The fabricated ceramic shows Maxwell–Wagner type of relaxation. - Abstract: Zn{sub 1−x}Mg{sub x}O ( ≤ x ≤ 0.1) ceramics were fabricated by conventional solid-state reaction of co-precipitated zinc oxide and magnesium hydroxide nanoparticles. Structural and morphological properties of the fabricated ceramics were studied using X-ray diffraction and scanning electron microscopic analysis. The dielectric measurements of the ceramics were carried out as a function of frequency and temperature respectively. Interestingly, Mg doped ZnO (MZO) samples exhibited colossal dielectric response (∼1 × 10{sup 4} at 1 kHz) with Debye like relaxation. The detailed dielectric studies and thermal analyses showed that the unusual dielectric response of the samples were originated from the defected grain and grain boundary (GB) conductivity relaxations due to the absorbed atmospheric water vapor (moisture). Impedance spectroscopy was employed to determine the defected grain and GB resistances, capacitances and which supported Maxwell–Wagner type relaxation phenomena.

36 MATERIALS SCIENCE↗

Microstructure, magnetic and microwave absorptive behavior of doped W-type hexaferrite nanoparticles prepared by co-precipitation method

Highlights: • High frequency properties of substituted W-type Sr-hexaferrite. • Saturation magnetization of samples is decreased with increasing of dopants content. • The ferrite sample covers about 6 GHz of bandwidth in K{sub u} band. • The optimum substituted samples can be used as a potential magnetic loss material. • Sample contain x = 0.4 of dopants have shown greater than 90% of reflection loss. - Abstract: Substituted W-type hexaferrite nanoparticles of SrZn{sub 2−x}Co{sub x/2}Ni{sub x/2}Fe{sub 16}O{sub 27} were synthesized by a chemical co-precipitation method. The X-ray diffraction results confirmed that W-type ferrite was identified as the main phase in whole samples in the range of x = 0–0.4. According to magnetic hysteresis loops, with increasing of substituted cations, saturation of magnetization increased and coercivity decreased due to crystalline site occupation of Zn with Ni and Co cations. The microwave reflection loss analysis results in the K{sub u} band (12–18 GHz) show that the highest value of reflection loss of samples was −29.11 dB at frequency of 14.57 GHz with an absorption bandwidth of more than 6 GHz by choosing reflection loss value of −10 dB as a reference. The results indicate that, the sample with appropriate amount of substituted cations hold great promise for microwave device applications.

36 MATERIALS SCIENCE↗

Effect of cation distribution on the magnetic and hyperfine behaviour of nanocrystalline Co doped Ni–Zn ferrite (Ni{sub 0.4}Zn{sub 0.4}Co{sub 0.2}Fe{sub 2}O{sub 4})

Highlights: • Cation distribution in tetrahedral and octahedral sites of spinel Ni{sub 0.4}Zn{sub 0.4}Co{sub 0.2}Fe{sub 2}O{sub 4}. • Structural analysis of observed X-ray diffraction pattern using Rietveld method. • Study of hyperfine behaviour using Mössbauer spectroscopy. • Static and dynamic magnetic measurements. • Correlation of cation distributions obtained from Rietveld analysis with the results of magnetic and Mössbauer effect measurements. - Abstract: Nanoparticles of Ni{sub 0.4}Zn{sub 0.4}Co{sub 0.2}Fe{sub 2}O{sub 4} are prepared by a simple co-precipitation method. The as dried sample is heat treated at 400, 500, 600, 700 and 800 °C to obtain different sizes of nanoparticles. The crystallographic phase of the samples is confirmed analyzing observed X-ray diffraction (XRD) by Rietveld method. Hyperfine parameters of the samples are derived from room temperature (RT) Mössbauer spectra of the samples. Magnetic properties of the samples are investigated by static and dynamic hysteresis loops. Different magneto-crystalline parameters are calculated from the variation of magnetization with temperature (M–T curve) under zero field cooled (ZFC) and field cooled (FC) conditions of the as dried sample. The cation distribution estimated from Rietveld analysis are correlated with the results of magnetic and Mössbauer effect measurements. The observed high value of saturation magnetization (72.7 emu/g at RT) of the sample annealed at 800 °C would be interesting for applications in different electromagnetic devices.

36 MATERIALS SCIENCE↗

Improved solar-driven photocatalytic performance of Ag{sub 2}CO{sub 3}/(BiO){sub 2}CO{sub 3} prepared in-situ

Highlights: • Ag{sub 2}CO{sub 3}/(BiO){sub 2}CO{sub 3} photocatalysts were prepared in-situ. • The photo-induced charge separation rate has been greatly increased. • The photocatalytic activity has been greatly promoted. - Abstract: Ag{sub 2}CO{sub 3}/(BiO){sub 2}CO{sub 3} composites have been fabricated in-situ via a facile parallel flaw co-precipitation method. The specific surface area, structure, morphology, and the separation rate of photo-induced charge pairs of the photocatalysts were characterized by Brunauer–Emmett–Teller (BET) method, X-ray diffraction (XRD), UV–vis diffuse reflectance spectroscopy(DRS), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), and surface photovoltage (SPV) spectroscopy, respectively. XRD patterns and DRS demonstrated that Ag{sub 2}CO{sub 3} has no effect on the crystal phase and bandgap of (BiO){sub 2}CO{sub 3}. The existence of Ag{sub 2}CO{sub 3} in the composites enhances the separation rate of photo-induced charge pairs of the photocatalysts. The photocatalytic performance of Ag{sub 2}CO{sub 3}/(BiO){sub 2}CO{sub 3} was evaluated by the decolorization of methyl orange (MO) aqueous solution under simulated solar irradiation. It was found that the simulated solar-induced photocatalytic activity of Ag{sub 2}CO{sub 3}/(BiO){sub 2}CO{sub 3} copmposites was significantly improved, which was mainly attributed to the enhanced surface area and the separation rate of photo-induced charge pairs.

36 MATERIALS SCIENCE↗

The effects of cetyltrimethylammonium bromide surfactant on alumina modified zinc oxides

Highlights: • Synthesis of novel ZnO−Al{sub 2}O{sub 3} oxides in the presence of CTAB surfactant. • Determination of the structural, surface and optical properties. • Nanocrystalline, high-surface area ZnO−Al{sub 2}O{sub 3} oxides. • ZnO-Al{sub 2}O{sub 3} materials of different gap energy. - Abstract: Novel alumina modified zinc oxide materials were prepared by co-precipitation method in the presence of different amounts of cetyltrimethylammonium bromide (CTAB) surfactant. X-ray diffraction, {sup 27}Al magic-angle spinning Nuclear Magnetic Resonance Spectroscopy, and transmission electron microscopy studies evidenced formation of 10–15 nm zinc oxide nanoparticles in the presence of the small amounts of surfactant. Amorphous alumina and zinc aluminate phases of different coordination environment of Al sites were identified. An increase of surfactant concentration led to the elongation of nanoparticles and changes of the nature of hydroxyl groups. Precipitation in the high CTAB concentration conditions facilitated formation of mesoporous materials of high specific surface area. The materials were composed of very small (2–3 nm) zinc aluminate spinel nanoparticles. High concentration of CTAB induced widening of band gap energy.

36 MATERIALS SCIENCE↗

Simple synthesis of PbSe nanocrystals and their self-assembly into 2D ‘flakes’ and 1D ‘ribbons’ structures

Highlights: • PbSe is obtained in a simple way by the co-precipitation method at low-temperature. • The structural, morphological and optical properties of PbSe were studied. • Adding NH{sub 4}OH to the precursor solutions influences on the morphology. • 2D- and 1D-PbSe structures assemble by oriented attachment. • PbSe can be a potential candidate for thermoelectric applications. - Abstract: This work presents a simple and low-temperature method to prepare a variety of Lead selenide (PbSe) nanostructures, using aqueous solutions of Pb(NO{sub 3}){sub 2} and NaHSe. Nanostructures with different morphology were obtained by varying the Pb:Se molar ratio, as well as the mixing sequence of NH{sub 4}OH with either Pb(NO{sub 3}){sub 2} or NaHSe. Nanoparticles with different shapes (spherical and octahedral), and self-assembled structures (flakes and ribbons) were observed by Transmission Electron Microscopy. X-ray results confirmed that the PbSe rock-salt crystalline structure was obtained for all of the prepared samples. The crystal size is in the order of 7.3 to 8.9 nm for single nanocrystals. The absorption spectra of the samples show exciton absorption bands at 1395 nm and 1660 nm. This material could be used to develop more advanced structures for thermoelectric generators.

36 MATERIALS SCIENCE↗

Synthesis and characterization of Ca{sup 2+} substituted barium niobate nanopaticles for photocatalytic and luminescence applications

Highlights: • Nanoparticles of Ca{sup 2+} (30 mol%) substituted BaNb{sub 2}O{sub 6} were synthesized. • Ca{sup 2+} ions occupy newer 8d Wyckoff positions rather than 4c. • Self-activated photoluminescence was observed. • Excellent H{sub 2} generation tendency from pure water under UV light was also observed. - Abstract: Ca{sup 2+} substituted barium niobate i.e. Ca{sub x}Ba{sub 1-x}Nb{sub 2}O{sub 6} (x = 0.3) compound in nanoparticles form was synthesized by a simple co-precipitation method for the first time and its structural characterization has been done by using powder X-ray diffraction data. Other characterizations were done by using transmission electron microscopy, energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy and ultraviolet-visible spectroscopy. It was found that the Ca{sub x}Ba{sub 1-x}Nb{sub 2}O{sub 6} (x = 0.3) compound stabilizes in the orthorhombic phase (Pbcn space group) with the lattice parameters a = 14.984 Å, b = 5.761 Å and c = 5.216 Å. A representative TEM image shows the irregular sphere like morphology of the synthesized particles with the size ranging from 70 to 120 nm. The optical band gap energy was found to be 3.74 eV. It was observed that the synthesized nanoparticles exhibit excellent H{sub 2} evolution tendency and self–activated photoluminescence under the excitation of UV light. These activities were assigned to the nanocrystalline nature of the synthesized material.

36 MATERIALS SCIENCE↗

Effect of mixing Ce{sup 3+} and Nd{sup 3+} ions in equimolar ratio on structural, optical and dielectric properties on pure cerium orthovanadate and neodymium orthovanadate

Highlights: • CeV, NdV and mixed CeNdV nanoparticle prepared by chemical co precipitation method. • With mixing of Ce{sup 3+} and Nd{sup 3+} morphology is totally changed in mixed CeNdV. • Optical band energy of CeV, NdV and CeNdV shows good photocatalyst under UV light. • Conduction mechanism in CeV due to large polaron and small polaron in CeNdV. - Abstract: Cerium orthovanadate, neodymium orthovanadate and mixed cerium neodymium orthovanadate nanoparticles was prepared by co-precipitation method. Powder X-ray diffraction reveals tetragonal zircon structure. Slight increase in lattice parameter, volume and decrease in X-ray density inferred that Ce{sup 3+} and Nd{sup 3+} ion replaces each other. Transmission electron microscopy suggests change in morphology with the effect of mixing and validates formation of nanocrystalline material. The infrared transmittance spectrum confirmed the presence of various functional groups. Dielectric properties as function of frequency show dielectric constant and loss tangent decreases with increase in frequency which is due to Maxwell–Wagner type interfacial polarization. The variation of AC conductivity measurement with frequency suggests conduction mechanism due to large polaron hopping in CeV whereas small polaron in mixed CeNdV. The activation energy decreases with rising frequency indicates the conduction mechanism is based on polaron hopping between localized states in disordered manner.

36 MATERIALS SCIENCE↗