Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COPPER OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Angular-Dependent Vortex Pinning Properties of YBa{sub 2}Cu{sub 3}O{sub 7−δ}/Y{sub 2}O{sub 3} Quasi-Multilayers

A series of quasi-multilayers of YBa{sub 2}Cu{sub 3}O{sub 7−δ} (YBCO)/Y{sub 2}O{sub 3} specifically 70 × (m YBCO/n Y{sub 2}O{sub 3}) were prepared on SrTiO{sub 3} single crystal using pulsed-laser deposition (PLD) with a controlled deposition pulses of m = 40 and n = 2, 5, and 10 for YBCO and Y{sub 2}O{sub 3}, respectively. The x-ray diffraction patterns indicate that all the present quasi-multilayers exhibit good c-axis orientation. The angular dependence of critical current density (J{sub c}) on applied magnetic field directions are systemically measured to study the anisotropic vortex pinning performances for those quasi-multilayers. It is revealed that compared with the pure YBCO films, the quasi-multilayers with n = 2, i.e., a proper constituent pulse of Y{sub 2}O{sub 3}, exhibits the enhanced vortex pinning abilities in all angles between c-axis orientation and the applied magnetic field direction. As well, such a quasi-multilayer film (n = 2) shows the higher lift factor J{sub c}(Θ)/ J{sub c}(90°) and much better vortex pinning properties at high fields and high temperatures, showing promising potential for coated conductor application.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Y{sub 2}BaCuO{sub 5} Nanoparticle Doping on Critical Current Density of YBa{sub 2}Cu{sub 3}O{sub 7-δ} Bulk Superconductor

This study presents the effect of Y{sub 2}BaCuO{sub 5} (Y211) nanoparticle doping on critical current density and critical temperature of YBa{sub 2}Cu{sub 3}O{sub 7-δ} (YBCO) superconductor. Y211 nanoparticles with different particle sizes ranging from 34 to 455 nm were synthesized by a sol-gel method, then doped into the YBCO superconductor by 0.5, 1, and 2 wt.%. Samples were characterized using X-ray diffraction and scanning electron microscope measurements. The standard four-probe technique was used to measure the critical current density at 77 K. The results showed that in the all-doped samples, critical current density was higher than that of the pure sample. It was found that in the samples containing 1 and 2 wt.% of Y211 nanoparticles, by increasing the size of nanoparticles, the J{sub c} was increased, but in samples containing 0.5 wt.%, the J{sub c} decreased. The maximum critical current density of 64 A/cm {sup 2} was obtained for the samples doped with 2 wt.% of 455 nm Y211 nanoparticles. Also, it was observed that the critical temperature slightly decreased with nanoparticle doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Josephson Effect in the Micron and Submicron YBCO Constrictions Fabricated Using the Femtosecond Laser Technique

A femtosecond laser was used successfully to fabricate planar micron and submicron-sized constrictiontype Josephson junctions on YBa{sub 2}Cu{sub 3}O{sub 7−x} thin films. A simple program using G-code (control systems) programming language was written to control the movement of the sample stage during the etching process. The constriction’s geometry was investigated using both atomic force microscopy (AFM) and scanning electron microscopy (SEM). Electrical transport measurements were performed at different temperatures. Shapiro steps were observed and analyzed. The micron-sized constriction shows a linear relationship for the measured critical current against the temperature which is consistent with the behavior of an S–s’–Stype Josephson junction where “S” stands for a bulk superconductive material that is untouched by the laser and “s”’ is superconducting material whose critical temperature is lower than the value of “S” In the case of the narrower submicronsized constriction, the measured critical current dependence with temperature shows an exponential decay, which is consistent with the behavior of the long S–N–Stype Josephson junction where “N” stands for a normal material. A model is proposed to describe the observed behavior by considering the effect of sample heating during the constriction’s fabrication.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication and Analysis of Tri-layer YBa{sub 2}Cu{sub 3}O{sub 7−δ} Thick Films by Low-Fluorine MOD Method

Improving the thickness of superconducting layer in coated conductors is an effective way to enhance its critical current. In this work, tri-layer YBCO/YBCO/YDyBCO films were successfully deposited on buffered Hastelloy substrate using the multi-coating lowfluorine metal-organic decomposition (LF-MOD) method and the thickness of the films can be up to 2.4 μ m. The effects of high-temperature annealing time on microstructures and superconducting properties of the films were systematically studied. Energy dispersive X-ray spectroscopy (EDS) results reveal that there remains a large amount of F element in the upper layer of the film when the annealing time is too short. With increasing the annealing time, the fluoride-containing precursor converts to YBCO grains completely. But the coarsening of grains appeared, and the critical current density (J{sub c}) of the film dropped slightly when the annealing time is too long. The cross-sectional scanning electron microscope (SEM) image and EDS plane analysis were applied to investigate the microstructure and element distribution of the final triple-layer YBCO films, respectively. The critical current of the final YBCO superconducting film could reach 316 A (77 k, self-field) for 1.2-cm-wide tapes with the optimal annealing conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation on the Current Transport Characteristics of SrTiO{sub 3}/YBa{sub 2}Cu{sub 3}O{sub 7−x} Heterostructure

By the combined use of the sol-gel and pulsed laser deposition methods, the SrTiO{sub 3}/YBa{sub 2}Cu{sub 3}O{sub 7−x} (STO/YBCO) heterostructure was prepared on a LaAlO{sub 3} substrate. XRD results and φ scanning test showed that the prepared STO/YBCO heterostructure had good biaxial texture. Moreover, a Pt electrode was sputtered on the STO/YBCO heterostructure to investigate the current density-voltage (J − V) characteristic curves of STO/YBCO in the 50–300 K temperature range. The results showed that the STO/YBCO heterostructure had good rectifying characteristics. With an applied positive bias voltage smaller than 3.7 V, the current density of the STO/YBCO heterostructure decreased with the decrease of temperature; for higher voltages, on the contrary, the current density increased with the decrease of temperature. When the YBCO experienced superconducting transition, the turn-on voltage (V{sub t}) changed suddenly due to the sudden opening of the superconducting energy gap of YBCO. The V{sub t} variation obtained from the experiment was essentially consistent with the known value of the YBCO superconducting energy gap.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Abnormal Transport and Magnetic Properties Induced by Change of the Phase Volume Ratio for YBa{sub 2}Cu{sub 3}O{sub 7-δ}/La{sub 0.67}Sr{sub 0.33}MnO{sub 3} Hybrids

Two elaborately designed hybrids consisting of superconducting YBa{sub 2}Cu{sub 3}O{sub 7-δ} (YBCO) and ferromagnetic La{sub 0.67}Sr{sub 0.33}MnO{sub 3} (LSMO), namely 20 × (YBCO(m)/LSMO(100 − m)) are prepared on single crystal SrTiO{sub 3} (STO) by pulsed laser deposition (PLD) with 20 being repetition periods and m = 90 and 10, respectively, which represents YBCO pulse number in a period. The films show highly c-oriented and epitaxial quality, suggested by XRD 𝜃–2𝜃 scans and pole figures. The 20 × (YBCO90/LSMO10) sample with a large YBCO volume fraction exhibits the typical character of a metal superconductor at about 90 K, while its transition width reaches 9.1 K, which is nearly eight times of that of the pure YBCO film. Above the superconducting transition temperature, a superparamagnetic signal rather than ferromagnetic behavior is observed, which may be associated with a diluted system consisting of the ferromagnetic nanoparticles embedded in the superconducting films. For the hybrid with a small YBCO volume fraction, i.e., the 20 × (YBCO10/LSMO90) sample, its transport behavior at normal state is insulating, and it is found that the Mott variable range hopping conduction dominates in this insulating phase in the temperature range 70–310 K. Obviously distinguishable insulator to superconductor (IS) transition occurs at 52 K, but the superconducting diamagnetic signals are very weak in the magnetic measurements below the IS temperature. For this sample, the magnetization loop at 100 K is ferromagnetic, yet manifested by a reduced coercive field and residual magnetization as compared with a pure LSMO film. In fact, both hybrids represent two kinds of nanocomposites, i.e., superconducting nanoparticles in a ferromagnetic matrix and ferromagnetic nanoparticles in a superconducting matrix, which benefits to study interfacial interactions due to an increased interface to value ratio and reduced size effect.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Yb Substitution on Microstructure and Superconducting Properties of Y{sub 1−x}Yb{sub x}Ba{sub 2}Cu{sub 3}O{sub 7−δ} Films

The purpose of this study was to improve the critical current density (J{sub c}) of YBa{sub 2}Cu{sub 3}O{sub 7−δ} (YBCO) superconducting films at high magnetic fields. Thin Y{sub 1−x}Yb{sub x}Ba{sub 2}Cu{sub 3}O{sub 7−δ} (Y{sub 1−x}Yb{sub x}BCO) superconducting films on LaAlO{sub 3} substrates were prepared by modified low-fluorine metal organic deposition method (LF-MOD) in order to investigate the effect of Yb substitution on the microstructure and superconducting properties of a YBCO-coated conductor. In this study, single-phased, c-axial-aligned Y{sub 1−x}Yb{sub x}BCO films were obtained. Yb doping had a little effect on the critical temperature (T{sub c}) and transition width (ΔT) values of Y{sub 1−x}Yb{sub x}BCO films. An abnormal phenomenon was observed that the J{sub c} of Y{sub 1−x}Yb{sub x}BCO films at low field was smaller than that of the pure YBCO film, but the J{sub c} of Y{sub 1−x}Yb{sub x}BCO films at high field was much greater than that of the undoped YBCO film. Compared to pure YBCO film, the J{sub c} values of Y{sub 0.75}Yb{sub 0.25}BCO and Y{sub 0.25}Yb{sub 0.75}BCO films were enhanced by a factor of 8 at 8 T, 65 K, which meant that chemical substitution of Yb into the Y site could improve flux pinning significantly under the high magnetic field in Y{sub 1−x}Yb{sub x}BCO coated conductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced Pinning Properties of the Bilayers of YDy{sub 0.5}Ba{sub 2}Cu{sub 3}O{sub 7−δ} by SrZrO{sub 3} Nanoparticles through Low Fluorine Metallorganic Solution Deposition

Bilayered YDy{sub 0.5}Ba{sub 2}Cu{sub 3.6}O{sub 7−δ} superconducting films with a thickness of about 1 μ were deposited by metallorganic deposition method, an interlayer of secondary phase of SrZrO{sub 3} (SZO) and BaZrO{sub 3} (BZO) were inserted. Detailed growth mechanism studies of these structures as well as superconducting properties in different temperatures and magnetic field range (0–5 T) were investigated. Structural analysis showed that bilayer structure changed clearly the growth mechanism of YBCO. The SZO interlayer smoothens the film surface. Magnetic measurements of superconducting properties demonstrated that the critical temperature decreases slightly when both of SZO and BZO interlayer were inserted. This indicates a growing strain effect at the layer interfaces. The critical current densities as well as pining forces of bilayered YDy{sub 0.5}Ba{sub 2}Cu{sub 3.6}O{sub 7−δ} in the entire applied temperature and magnetic field range were enhanced by the insertion of SZO layer and decreased when BZO layer is introduced. The enhancement of the pinning properties is explained by the dense flux pinning in layered YDyBCO superconductors; this result may give further improvements in the current-carrying capability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Oxygen on the Tribomechanical Properties of Single Crystals of YBa{sub 2}Cu{sub 3}O{sub 7−δ}

This paper reports a study on the mechanical and tribological properties of ab- and a (b) c−planes of YBa{sub 2}Cu{sub 3}O{sub 7−δ} single crystals. The single crystals were grown using a CuO-BaO self-flux method. The oxygenation effect on the mechanical and tribological properties of ab- and a (b) c−planes is reported. For the ab- plane, the hardness and elastic modulus were around 6 and 50 GPa, respectively. In this case, significant differences were not observed among the hardness and elastic modulus at different oxygenation states. However, the hardness and elastic modulus for as-grown and oxygenated YBa{sub 2}Cu{sub 3}O{sub 7−δ} single crystals were different from that of the a (b) c−plane, and were observed to be slightly higher for the as-grown than for the oxygenated samples. For as-grown and oxygenated samples, we observed hardness values around 4.7 and 2.0 GPa, respectively. Regarding the elastic modulus, the values were 75 and 40 GPa, respectively. The indentation fracture toughness values on the ab- plane for the as-grown and oxygenated YBa{sub 2}Cu{sub 3}O{sub 7−δ} single crystal were 3.7 ± 1.2 and 2.9 ± 1.2 MPa m{sup 1/2}, respectively. For the ab- plane, the scratch resistance of the as-grown sample was higher than that of the oxygenated sample and the scratches under load were deeper for the oxygenated sample. As regards the a (b) c−plane, the scar features were seemingly constant through all the scratch lengths and the scratches under load were deeper and larger for the oxygenated than that for the as-grown sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

AC Susceptibility and Superconducting Properties of Graphene Added YBa{sub 2}Cu{sub 3}O{sub 7−d}

The effect of graphene (G) addition on YBa{sub 2}Cu{sub 3}O{sub 7−δ}(G){sub x} (x = 0 − 0.03 wt%) has been studied using the X-ray diffraction method, scanning electron microscopy, electrical resistance versus temperature, transport critical current density J{sub c}, and AC susceptibility measurements. XRD patterns showed single-phase YBa{sub 2}Cu{sub 3}O{sub 7−δ} (YBCO) for all samples. SEM micrographs showed filling of the voids between YBa{sub 2}Cu{sub 3}O{sub 7−δ} grains as graphene was added. The temperature-dependent electrical resistance curves showed metallic normal state behavior and onset transition temperature T{sub conset} between 90 and 92 K for all samples. AC susceptibility measurement showed transition temperature T{sub cχ{sup ′}} between 90 and 93 K. T{sub cχ{sup ′}} was maintained or improved slightly as graphene was added. The x = 0.001 wt% showed the highest J{sub c}, i.e., 2750 A cm{sup −2} at 77 K and 5570 mA cm{sup −2} at 30 K which was 13 and 40 times higher than that of the non-added YBCO, respectively. The peak temperature T{sub p} of the imaginary part of the susceptibility χ{sup ″} was around 78–82 K for all samples indicating grain coupling was not weakened as graphene was added.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of YBa{sub 2}Cu{sub 3}O{sub 7−δ} Superconductor/Graphene Oxide Composite

The aim of this research was to fabricate YBa{sub 2}Cu{sub 3}O{sub 7−δ} (YBCO) superconductor composite with graphene oxide nanosheets and to study the effect of the graphene oxide nanosheets on YBCO superconductor properties. For this purpose, the samples of pure superconductor and superconductor composite with 0.001, 0.01, and 0.1 wt.% graphene oxide were synthesized. First, graphite oxide was made by Hummer’s chemical method; after that, graphene oxide nanosheets were produced by bath-keeper ultrasonic. Then, different amounts of graphene oxide were added to the process of superconductor fabrication, which was made by solid-state reaction method. The samples were characterized and studied by Meissner effect test, XRD analysis, FESEM imaging, EDX measurement, and ac magnetic susceptibility. The critical current density (J{sub c}) of samples was measured by four probes method. The results showed that by increasing the weight ratio of graphene oxide, J{sub c} and T{sub c} decrease.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparison of AC Losses of YBCO Circular Pancake Coils and Infinitely Long Stack Approximation

High-temperature superconducting (HTS) coils are key parts of many large-scale AC applications, such as transformers, superconducting magnetic energy storage, and motors. The estimation of AC losses of pancake coils is necessary for optimizing the design of HTS devices and cryogenic systems. To speed up the computation of AC losses, the numerical model of an infinitely long HTS stack is often utilized. An HTS stack is a good approximation of the circular coil only if the coil radius is sufficiently large, since AC losses will exhibit a stronger asymmetry along the radial direction for small values of coil radii. To assess the validation of an infinitely long stack approximation, the comparisons of AC losses between infinitely long stacks and circular coils with different radii are presented. The turn number varies from 10 to 80. We find that the AC losses of HTS circular coils will gradually increase to the same value as an infinitely long stack with increasing coil radii. A new parameter is proposed to quantitatively describe the correctness of infinitely long stack approximation. Finally, a method of AC loss estimation of HTS pancake coils is proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of Electronic Structure, Magnetism, and Half-Metallicity of New Heusler Compounds CsTmO{sub 2} (Tm = Fe, Co, Ni, and Cu)

The density functional calculations were performed using the full-potential linearized augmented plane wave (FPLAPW) method for new Heusler alloys CsTmO{sub 2} (Tm = Fe, Co, Ni, and Cu). All compounds were stable in FM AlCu{sub 2}Mn-type structure. Results revealed that these alloys can be experimentally synthesized according to the calculated cohesive and formation energies. CsTmO{sub 2} (Tm = Fe, Co, Ni, and Cu) alloys in AlCu{sub 2}Mn-type and CuHg{sub 2}Ti-type structures were half-metallic ferromagnets. The origin of half-metallicity in CsNiO{sub 2} alloy was also discussed. The total magnetic moment of CsTmO{sub 2} (Tm = Fe, Co, Ni, and Cu) alloys in both structures were 3 μ{sub B} per formula unit and obeyed the Slater-Pauling rule (M{sub tot} = 22 − Z{sub tot}). The relationship between the magnetism and half-metallicity of all compounds and the lattice constants was also studied. The half-metallic character in combined alloys CsTmO{sub 2} (Tm = Fe, Co, Ni, and Cu) improved in comparison with Heusler alloys including transition metals which indicated that they may be good candidates for practical applications in spintronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improved Superconducting Properties of Thick YBa{sub 2}Cu{sub 3}O{sub 7−δ} Film by Adding Amino-Rich Polyethyleneimine in Precursor Solution

Polyethyleneimine (PEI) with an amount of –NH{sub 2} groups used in precursor solution could effectively reduce Cu{sup 2+} volatilization during the pyrolysis process. Thermogravimetric analysis shows that the temperature window of low-temperature pyrolysis for precursor solution with PEI (PEI-YBCO) is widened significantly. The slower pyrolysis process can enrich Cu{sup 2+} and improve critical current density (J{sub c}) of PEI-YBCO films. The highest J{sub c} is 3.03 MA/cm{sup 2} at 77 K when the amount of PEI is 0.5 g/10 mL and the film thickness is 400 nm. Then the thickness increases from 0.4 to 2.0 μm by changing the coating times. The J{sub c} values of PEI-YBCO films decrease gradually with the thickness increase. However, the critical current (I{sub c}) can be up to 197 A/cm (at 77 K, self-field) and J{sub c} can still keep 1.68 MA/cm{sup 2} at 1.2 μm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fano Resonance by Means of the One-Dimensional Superconductor Photonic Crystals

In the present work, we introduce a study about the reflectance properties of a one-dimensional superconductor photonic crystal in a different manner. Our structure is designed from alternately layers of high-temperature superconducting material (BSCCO) and a conventional superconducting material (Nb) terminated by the dielectric cap layer. The investigated numerical results are essentially based on the basics of the transfer matrix method and the two-fluid model. The numerical results showed the appearance of two sharp peaks, which are referred to Fano and electromagnetic-induced reflectance resonances. Also, we demonstrate the effects of many parameters on the reflectance properties of Fano resonance and the electromagnetic-induced reflectance. The effects of the constituent layer thicknesses, the number of periods, the operating temperature, the angle of incidence, and the refractive index of the dielectric cap layer are all considered. Finally, the effects of hydrostatic pressure on the Fano and EIR resonances are studied and calculated. This structure can play an important role in optical switching devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation on Effect of Magnetic Field Dependency Coefficient of Critical Current Density on the AC Magnetizing Loss in HTS Tapes Exposed to External Field

High-temperature superconducting (HTS) technology is the most promising, advanced, and beneficial technological developments of the last two decades in terms of fabricating more efficient, compact, and reliable electrical power apparatus. The second-generation HTS wires are now quite competitive with traditional conductors from the cost point of view. In addition, they are of high interest in electrical machine manufacturing due to their unique merits such as high current density, high magnetic field, and low loss. The most significant issue for any superconducting devices which work with alternating current or magnetic field is the AC loss of the HTS tapes. Since HTS tapes are always exposed to an external magnetic field in electrical machine applications, it is vital to consider the effect of this external field on their AC magnetizing (ACMG) loss. It is well-known that external magnetic field decreases the current carrying capability of the wire. In real life, critical current density of HTS tapes is dependent to magnetic field but this dependency sometime was not considered in modeling stage in order to make it faster and simple. In this paper, the electromagnetic properties of HTS tapes for use in superconducting electric machines have been investigated with a particular focus on the ACMG loss of YBCO tapes. For this purpose, a two-dimensional finite element model has been implemented based on the H formulation in order to study the effect of dependency of critical current density to magnetic field on the variation of ACMG loss. The modeling results will be helpful for electrical machine designers to have a better understanding about this effect and have a more accurate estimate of ACMG loss in design stage.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Low-Cost Fabrication Technique for the Growth of Single-Domain GdBCO Bulk Superconductor from Raw Metal Oxides

A single-domain GdBCO bulk superconductor is usually fabricated using a mixture of pre-reacted precursor powders (including GdBa{sub 2}Cu{sub 3}O{sub 7−δ} and Gd{sub 2}BaCuO{sub 5}) by the top-seeded melt texture growth (TSMTG) process. However, the synthesis of pure-phase precursor powder by the solid-state sintering reaction can not only consume time for weeks but also prolong the fabrication process and can lead to a low-efficiency and high-cost process. In this paper, we reported the successful growth of single-domain GdBCO bulk superconductors by the top-seeded metallic oxide melt growth (TS-MOMG) process in which the raw materials of Gd{sub 2}O{sub 3}, BaO, and CuO, the three different metallic oxides, are just involved to fabricate the single-domain GdBCO bulk superconductors. After detailed investigations in the morphology, levitation force, trapped magnetic field, and critical temperature of the grown samples with different ratios, it was found that the simplified precursor-phase source can be used to fabricate the single-domain GdBCO bulk superconductors more efficiently, which can combine the crystal growth procedure and greatly economize the preparation cost and the time to the most extent.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Resistance Anomalies at Superconducting Transition in Multilayer N/S/F/S/N Heterostructures

We have prepared lateral N/S/F/S/N heterostructures from perovskite bilayer YBa{sub 2}Cu{sub 3}O{sub 7−x} (YBCO (70 nm), as superconductor S) and La{sub 1−x}Sr{sub x}MnO{sub 3} (LSMO (30 nm), as ferromagnet F) covered ex situ by Au layer (normal metal N, 50 nm) and Ti layer (50 nm). Whereas the Ti layer serves as a mask at Ar{sup +} ion beam etching, the gold layer protects the properties of bilayer LSMO/YBCO during the fabrication process mainly during Ga{sup +} focused ion beam etching. In many cases, the resistance vs. temperature (R(T)) dependences of the heterostructures exhibited some peculiarities (resistance peaks and dips) at superconducting transition. To explain these anomalies, we used transport effects emerging between resistances of individual layers and resistances of their interfaces. Our simulations fit very well the experimental R(T) dependences of N/S/F/S/N heterostructures and show that transport effects can play an important role in multilayer structures which can be used in spintronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗