Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CONTROL DEVICE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Microfluidic volumetric flow determination using optical coherence tomography speckle: An autocorrelation approach

Functional modalities of Optical Coherence Tomography (OCT) based on speckle analysis are emerging in the literature. We propose a simple approach to the autocorrelation of OCT signal to enable volumetric flow rate differentiation, based on decorrelation time. Our results show that this technique could distinguish flows separated by 3 μl/min, limited by the acquisition speed of the system. We further perform a B-scan of gradient flow inside a microchannel, enabling the visualization of the drag effect on the walls.

42 ENGINEERING↗
DOE OSTI2016

Boost up the electrical performance of InGaZnO thin film transistors by inserting an ultrathin InGaZnO:H layer

This study examined the electrical performance of bilayer channel InGaZnO:H/InGaZnO thin-film transistors (TFTs). The field-effect mobility and bias stress stability of the InGaZnO device were improved by inserting the hydrogenated InGaZnO ultrathin layer compared to the pure InGaZnO single channel layer device. As a consequence, a high field-effect mobility of 55.3 cm{sup 2}/V s, a high on/off current ratio of 10{sup 8}, a threshold voltage of 0.7 V, and a small sub-threshold swing of 0.18 V/decade have been achieved. The X-ray photoelectron spectroscopy and low-frequency noise analysis suggest that these desirable properties should be attributed to the ultrathin InGaZnO:H layer, which could provide suitable carrier concentration and reduce the average trap density near the channel and insulator layer interface. Meanwhile, the channel conductance of the bilayer device is controlled by thick InGaZnO layer through formation barrier energy for electron transport at the interface of InGaZnO:H and InGaZnO layer. These improved electrical properties have represented a great step towards the achievement of transparent, high performances, and low-cost metal oxide TFTs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Waveguiding and bending modes in a plasma photonic crystal bandgap device

Waveguiding and bending modes are investigated in a fully tunable plasma photonic crystal. The plasma device actively controls the propagation of free space electromagnetic waves in the S to X band of the microwave spectrum. An array of discharge plasma tubes form a square crystal lattice exhibiting a well-defined bandgap, with individual active switching of the plasma elements to allow for waveguiding and bending modes to be generated dynamically. We show, through simulations and experiments, the existence of transverse electric (TE) mode waveguiding and bending modes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

A multi-species powder dropper for magnetic fusion applications

Here, we present a device for controlled injection of a variety of materials in powder form. The system implements four independent feeder units, arranged to share a single vertical drop tube. Each unit consists of a 80 ml reservoir, coupled to a horizontal linear trough, where a layer of powder is advanced by piezo-electric agitation at a speed proportional to the applied voltage, until it falls into a drop tube. The dropper has been tested with a number of impurities of low (B, BN, C), intermediate (Si, SiC), and high Z (Sn) and a variety of microscopic structures (flakes, spheres, rocks) and sizes (5-200 μm). For low Z materials, drop rates ~2-200 mg/s have been obtained showing good repeatability and uniformity. A calibrated light-emitting diode (LED)-based flowmeter allows measuring and monitoring the drop rate during operation. The fast time-response of the four feeders allows combination of steady and pulsed injections, providing a flexible tool for controlled-dose, real-time impurity injection in fusion plasmas.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Characterizing magnetized plasmas with dynamic mode decomposition

Accurate and efficient plasma models are essential to understand and control experimental devices. Existing magnetohydrodynamic or kinetic models are nonlinear and computationally intensive and can be difficult to interpret, while often only approximating the true dynamics. In this work, data-driven techniques recently developed in the field of fluid dynamics are leveraged to develop interpretable reduced-order models of plasmas that strike a balance between accuracy and efficiency. In particular, dynamic mode decomposition (DMD) is used to extract spatio-temporal magnetic coherent structures from the experimental and simulation datasets of the helicity injected torus with steady inductive (HIT-SI) experiment. Three-dimensional magnetic surface probes from the HIT-SI experiment are analyzed, along with companion simulations with synthetic internal magnetic probes. A number of leading variants of the DMD algorithm are compared, including the sparsity-promoting and optimized DMD. Optimized DMD results in the highest overall prediction accuracy, while sparsity-promoting DMD yields physically interpretable models that avoid overfitting. These DMD algorithms uncover several coherent magnetic modes that provide new physical insights into the inner plasma structure. These modes were subsequently used to discover a previously unobserved three-dimensional structure in the simulation, rotating at the second injector harmonic. Finally, using data from probes at experimentally accessible locations, DMD identifies a resistive kink mode, a ubiquitous instability seen in magnetized plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Initial study on thermal stability of cold spray tantalum coating irradiated with deuterium for fusion applications

Abstract Removal of neutral hydrogen atoms in the plasma edge reduces the number of charge exchange events and thus, the net energy losses in the plasma, significantly improving performance of fusion devices. Effective control of the residual pressure of hydrogen isotopes (HIs) in the plasma edge may be achieved by utilizing a hydrogen absorbing first wall interface capable of withstanding the harsh fusion environment. In this study, we have investigated tantalum (Ta) coating deposited by cold spray technology on 316L stainless steel substrate as a potential plasma-facing material surface. High fluence low energy deuterium plasma irradiation experiments and subsequent thermal annealing cycles associated with thermal desorption spectrometry (TDS) demonstrated superior structural stability of the Ta coating. TDS experiments revealed the outgassing of deuterium (as measure of its retention) for cold spray Ta coatings to be three times higher than bulk Ta and two orders of magnitude greater than bulk polycrystalline W. X-ray photoelectron spectroscopy revealed evolution of oxidation states upon deuterium irradiation and a partial recovery of the metallic signature of Ta after the thermal treatment at 1100 K.

Physics↗
DOE OSTI2019

Self-assembled Ag(111) nanostructures induced by Fermi surface nesting

Scanning tunneling microscopy measurements on Ag(111)/MoS 2 reveal atomically flat preferred, or “magic,” heights occurring at 6, 10, and 14 atomic layers. We note these results are consistent with Ag growth on a variety of semiconducting substrates and correlate with electronic energy savings in electronic structure calculations of freestanding Ag(111) films. Thus, under certain conditions, Ag will spontaneously form quantized structures independent of the substrate. To explain this, we have found Fermi surface nesting vectors in the bulk Ag band structure which account for these results and the fact Ag that is gapped along the surface normal. This model extends to a range of metallic systems which exhibit electronic confinement, epitaxial growth, and minimal strain. As with Au/MoS 2 , the Ag/MoS 2 system exhibits this behavior at unusually high temperatures so that these principles might be used for control over device features at the nanometer scale under standard fabrication conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Collective dynamics and defect generation for Wigner crystal ratchets

Here we consider a two-dimensional Wigner crystal coupled to a quasi-one-dimensional asymmetric potential under ac or dc driving. As a function of electron density, substrate strength, and ac amplitude, we find that the system exhibits ordered and disordered pinned and dynamical states. Ratchet effects can appear under an applied ac drive and can be associated with pronounced structural changes from a disordered state to a one-dimensional smecticlike state. We observe a pinned phase, a diodelike ratchet where motion only occurs along the easy direction of the substrate asymmetry, a plastic ratchet where motion occurs in both directions but there is only a net drift in the easy direction, and an elastic ratchet where the system forms a crystal without plastic deformation that can still undergo ratcheting. At high filling, we find that there can be a ratchet reversal in which the net drift is along the hard direction of the substrate asymmetry. For weak disorder, there is an Aubry transition to a floating phase where the ratchet effects are lost. We map out the different dynamical phases as a function of substrate strength, filling, ac amplitude, and ac frequency. The ratchet effect on strong substrates is enhanced by thermal fluctuations, but is destroyed when the fluctuations become too large. Based on our results, we suggest other ways to detect Wigner crystals as well as methods for creating different types of devices to control disordered charge flow.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Tracing the Pathway from Drift-Wave Turbulence with Broken Symmetry to the Production of Sheared Axial Mean Flow

This study traces the emergence of sheared axial flow from collisional drift-wave turbulence with broken symmetry in a linear plasma device—the controlled shear decorrelation experiment. As the density profile steepens, the axial Reynolds stress develops and drives a radially sheared axial flow that is parallel to the magnetic field. Results show that the nondiffusive piece of the Reynolds stress is driven by the density gradient, results from spectral asymmetry of the turbulence, and, thus, is dynamical in origin. Taken together, these findings constitute the first simultaneous demonstration of the causal link between the density gradient, turbulence, and stress with broken spectral symmetry and the mean axial flow.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2017

Structural imaging of nanoscale phonon transport in ferroelectrics excited by metamaterial-enhanced terahertz fields

Nanoscale phonon transport is a key process that governs thermal conduction in a wide range of materials and devices. Creating controlled phonon populations by resonant excitation at terahertz (THz) frequencies can drastically change the characteristics of nanoscale thermal transport and allow a direct real-space characterization of phonon mean-free paths. Using metamaterial-enhanced terahertz excitation, we tailored a phononic excitation by selectively populating low-frequency phonons within a nanoscale volume in a ferroelectric BaTiO 3 thin film. Real-space time-resolved x-ray diffraction microscopy following THz excitation reveals ballistic phonon transport over a distance of hundreds of nm, two orders of magnitude longer than the averaged phonon mean-free path in BaTiO 3 . On longer length scales, diffusive phonon transport dominates the recovery of the transient strain response, largely due to heat conduction into the substrate. The measured real-space phonon transport can be directly compared with the phonon mean-free path as predicted by molecular dynamics modeling. In conclusion, this time-resolved real-space visualization of THz-matter interactions opens up opportunities to engineer and image nanoscale transient structural states with new functionalities.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Magnetoelectric properties at the Co/AlN(0001) interface

AlN nitride is a large-band-gap polar material that has gained interest due to its ability to become ferroelectric and its compatibility with Si- and GaN-based technologies. This compound could, therefore, be a good candidate to design new artificial multiferroics if combined with a ferromagnetic electrode. For this work, we performed first-principles calculations to investigate the set up of the magnetoelectric coupling at the Co/AlN(0001) interface. Our results describe a complex interfacial atomic structure with variable local magnetic properties as a function of the atom alignment. We predict an average variation of interface spin magnetization, when the polarization is reversed, of 3.83 𝜇B nm −2 , close to the values already reported in the literature at metal/oxide interfaces. This confirms the potential of this AlN-based ferroelectric compound to be used in future voltage-controlled spintronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Stabilizing Non-Abelian Topological Order Against Heralded Noise via Local Lindbladian Dynamics

An important open question for the current generation of highly controllable quantum devices is understanding which phases can be realized as stable steady states under local quantum dynamics. In this work, we show how robust steady-state phases with both Abelian and non-Abelian mixed-state topological order can be stabilized, in two spatial dimensions, against generic “heralded” noise using active dynamics that incorporate measurement and feedback, modeled as a fully local Lindblad master equation. These topologically ordered steady states are two-way connected to pure topologically ordered ground states using local quantum channels, and preserve quantum information for a time that is exponentially large in the system size. Specifically, we present explicit constructions of families of local Lindbladians for both Abelian (ℤ 2 ) and non-Abelian (𝐷 4 ) topological order whose steady states host mixed-state topological order when the noise is below a threshold strength. As the noise strength is increased, these models exhibit first-order transitions to intermediate mixed-state phases where they encode robust classical memories, followed by (first-order) transitions to a trivial steady state at high noise rates. When the noise is imperfectly heralded, steady-state order disappears but our active dynamics significantly enhances the lifetime of the encoded logical information. To carry out the numerical simulations for the non-Abelian 𝐷 4 case, we introduce a generalized stabilizer tableau formalism that permits efficient simulation of the non-Abelian Lindbladian dynamics.

Monte Carlo methods↗
DOE OSTI2017

Understanding and controlling chromaticity shift in LED devices

Chromaticity shift in light-emitting diode (LED) devices arises from multiple mechanisms, and at least five different chromaticity shift modes (CSMs) have been identified to date. This paper focuses on the impacts of irreversible phosphor degradation as a cause of chromaticity shifts in LED devices. The nitride phosphors used to produce warm white LEDs are especially vulnerable to degradation due to thermal and chemical effects such as reactions with oxygen and water. As a result, LED devices utilizing these phosphors were found to undergo either a green shift or, less commonly, a red shift depending on the phosphor mix in the LED devices. These types of chromaticity shifts are classified as CSM-2 (green shift) and CSM-5 (red shift). This paper provides an overview of the kinetic processes responsible for green and red chromaticity shifts along with examples from accelerated stress testing of 6” downlights. Both CSMs appear to proceed through analogous mechanisms that are initiated at the surface of the phosphor. A green shift is produced by the surface oxidation of the nitride phosphor that changes the emission profile to lower wavelengths. As the surface oxidation reaction proceeds, reactant limitations slow the rate and bulk oxidation processes become more prevalent. We found that a red chromaticity shift arises from quenching of the green phosphor, also possibly due to surface reactions of oxygen, which shift the emission chromaticity in the red direction. In conclusion, we discuss the implications of these findings on projecting chromaticity.

Davis, Lynn↗
DOE OSTI2021

A Review of Current Research Trends in Power-Electronic Innovations in Cyber–Physical Systems

Here, in this article, a broad overview of the current research trends in power-electronic innovations in cyber–physical systems (CPSs) is presented. The recent advances in semiconductor device technologies, control architectures, and communication methodologies have enabled researchers to develop integrated smart CPSs that can cater to the emerging requirements of smart grids, renewable energy, electric vehicles, trains, ships, the Internet of Things (IoT), and so on. The topics presented in this article include novel power-distribution architectures, protection techniques considering large renewable integration in smart grids, wireless charging in electric vehicles, simultaneous power and information transmission, multihop network-based coordination, power technologies for renewable energy and smart transformer, CPS reliability, transactive smart railway grid, and real-time simulation of shipboard power systems. It is anticipated that the research trends presented in this article will provide a timely and useful overview to the power-electronics researchers with broad applications in CPSs.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2019

Evaluating Time Varying Connectivities and System Throughput in Opportunistic Networks for Smart Grid Applications

With increasing proliferation of smart phones, there is an opportunity to employ mobile ad hoc networks to connect to distributed energy assets located in remote areas. With embedded intelligence and edge computing capabilities, autonomous ‘edge control nodes’ can enable a decentralized energy nexus, without the need for on-demand communications. Authors have developed an opportunistic networking framework using Bluetooth Low Energy and a specialized mobile phone application that enables delay tolerant networking for the above framework. Here, this paper presents the analysis of time varying graph connectivity for such an opportunistic mobile ad hoc network. Dependence of connectivity on different network parameters such as radio characteristics, the mobility of data mules and parameters governing how connections are established are explored. Simulation results showing the variation of above trends have been presented.

Bluetooth↗
DOE OSTI2016

SU-F-P-14: Oxygen Inhalation Should Be the Conventional Approach in the Treatment of Thoracic and Abdominal Cancer by Radiotherapy with Active Breathing Control (ABC)

Purpose: To investigate the feasibility and potential benefit of oxygen inhalation (OI) during radiotherapy applying an active breathing control (ABC) device, by analyzing the blood oxygen saturation (SpO2) and the instantaneous heart rate (IHR) variation in breath holding with OI and oxygen non-inhalation (ONI). Methods: The 27 healthy volunteers (16 males, 11 females) who were involved in this trial were all required to hold their breath for 10 times, non-inhaling and inhaling oxygen successively. The breath-holding time (BHT), rest time (RT), SpO2 and IHR under different oxygen status were recorded and compared. Results: The volunteers were divided into two groups according to SpO2 variations in breath-holding: group A (12 cases), with less than2% decline of SpO2; group B (15 cases), with a decline that surpassed 2%, and which could reach 3–6%. The BHT of group A, without inhaling oxygen, was significantly longer than that of group B (mean 33.77s Vs 30.51s, p<0.05); and was extended by 26.6% and 27.85%, after inhaling oxygen, in groups A and B, respectively. The SpO2 decreased in all volunteers during RT with ONI, to an extent that could reach up to 6%. The IHR of all volunteers showed the fast-slow-fast variation rule, and the oxygen had little effect. More than 70% of the volunteers stated that oxygen made them feel more comfortable and were more cooperative when ABC was used. Conclusion: The SpO2 declines during breath holding and RT could not be ignored while applying ABC, oxygen inhalation should become a conventional method with lengthening BHT and shortening RT, which yielded the benefit of improving the stability and reproducibility.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

A three-dimensional photonic topological insulator using a two-dimensional ring resonator lattice with a synthetic frequency dimension

In the development of topological photonics, achieving three-dimensional topological insulators is of notable interest since it enables the exploration of new topological physics with photons and promises novel photonic devices that are robust against disorders in three dimensions. Previous theoretical proposals toward three-dimensional topological insulators use complex geometries that are challenging to implement. On the basis of the concept of synthetic dimension, we show that a two-dimensional array of ring resonators, which was previously demonstrated to exhibit a two-dimensional topological insulator phase, automatically becomes a three-dimensional topological insulator when the frequency dimension is taken into account. Moreover, by modulating a few of the resonators, a screw dislocation along the frequency axis can be created, which provides robust one-way transport of photons along the frequency axis. Demonstrating the physics of screw dislocation in a topological system has been a substantial challenge in solid-state systems. Our work indicates that the physics of three-dimensional topological insulators can be explored in standard integrated photonic platforms, leading to opportunities for novel devices that control the frequency of light.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Programmable hyperbolic polaritons in van der Waals semiconductors

Lighting a route for hyperbolic dispersion The propagation of light within a material is usually well defined, with the propagation described by scattering and dispersion. In artificially designed metamaterials and in anisotropic layered materials, the dispersion can be hyperbolic, giving rise to subwavelength confinement of the light. Sternbach et al. show that the hyperbolic dispersion can be optically switched on and off on demand in the layered transition metal dichalcogenide tungsten diselenide (see the Perspective by Deng and Chen). Illuminating the material with ultrafast pulses of sub-bandgap light creates a transient waveguide, resulting in hyperbolic dispersion in the material. The ability to tune the dispersion characteristics on demand using optical pumping is an effective approach for developing ultrafast switching photonic devices and controlling the propagation of light on the nanoscale. Science , this issue p. 617 ; see also p. 572

Science & Technology - Other Topics↗