Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMPILED DATA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

SUBMILLIMETER POLARIZATION OF GALACTIC CLOUDS: A COMPARISON OF 350 {mu}m AND 850 {mu}m DATA

The Hertz and SCUBA polarimeters, working at 350 {mu}m and 850 {mu}m, respectively, have measured the polarized emission in scores of Galactic clouds. Of the clouds in each data set, 17 were mapped by both instruments with good polarization signal-to-noise ratios. We present maps of each of these 17 clouds comparing the dual-wavelength polarization amplitudes and position angles at the same spatial locations. In total number of clouds compared, this is a four-fold increase over previous work. Across the entire data set real position angle differences are seen between wavelengths. While the distribution of {phi}(850)-{phi}(350) is centered near zero (near-equal angles), 64% of data points with high polarization signal-to-noise (P {>=} 3{sigma}{sub p}) have |{phi}(850)-{phi}(350)| > 10 Degree-Sign . Of those data with small changes in position angle ({<=}10 Degree-Sign ) the median ratio of the polarization amplitudes is P(850)/P(350) = 1.7 {+-} 0.6. This value is consistent with previous work performed on smaller samples and models that require mixtures of different grain properties and polarization efficiencies. Along with the polarization data we have also compiled the intensity data at both wavelengths; we find a trend of decreasing polarization with increasing 850-to-350 {mu}m intensity ratio. All the polarization and intensity data presented here (1699 points in total) are available in electronic format.

79 ASTRONOMY AND ASTROPHYSICS↗

Cosmological constraints on induced gravity dark energy models

We study induced gravity dark energy models coupled with a simple monomial potential ∝ σ{sup n} and a positive exponent n . These simple potentials lead to viable dark energy models with a weak dependence on the exponent, which characterizes the accelerated expansion in the asymptotic attractor, when ordinary matter becomes negligible. We use recent cosmological data to constrain the coupling γ to the Ricci curvature, under the assumptions that the scalar field starts at rest deep in the radiation era and that the gravitational constant in the Einstein equations is compatible with the one measured in a Cavendish-like experiment. By using Planck 2015 data only, we obtain the 95 % CL bound γ < 0.0017 for n =4, which is further tightened to γ < 0.00075 by adding Baryonic Acoustic Oscillations (BAO) data. This latter bound improves by ∼ 30 % the limit obtained with the Planck 2013 data and the same compilation of BAO data. We discuss the dependence of the γ and Ġ{sub N}/G{sub N} (z = 0) on n.

79 ASTRONOMY AND ASTROPHYSICS↗

Fatigue and Creep-Fatigue Evaluation of Alloy 709 at 760 and 816°C

A significant research and development effort is underway to support the qualification of Alloy 709 as a Class A construction material in the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section III, Division 5, High Temperature Reactors. This initiative includes a comprehensive Alloy 709 code qualification plan aimed at generating extensive material testing data crucial for compiling the code case data package. The data package is essential in establishing material-specific design parameters for Alloy 709 to be used as Section III, Division 5 Class A construction material for fast reactors, molten salt reactors and gas-cooled reactors. An ASME Section III, Division 5 material code case requires the evaluation of mechanical properties from a minimum of three commercial heats, covering anticipated compositional ranges. A key part of the data package involves fatigue and creep-fatigue testing at elevated temperatures, needed for developing the fatigue design curves and the damage envelope of the creep-fatigue interaction diagram (D-diagram). This paper summarizes the strain-controlled fatigue testing on three commercial heats of Alloy 709 at 760 and 816°C with strain ranges between 0.25% and 3%. The fatigue failure data are used to generate a preliminary fatigue design curve. Additionally, the creep-fatigue testing results at 816°C with tensile hold times of 10, 30, and 60 minutes are presented in support of developing the D-diagram for Alloy 709.

Wang, Yanli↗

Dataset used to improve liquid water absorption models in the microwave

Two datasets, one a compilation of laboratory data and one a compilation from three field sites, are provided here. These datasets provide measurements of the real and imaginary refractive indices and absorption as a function of cloud temperature. These datasets were used in the development of the new liquid water absorption model that was published in Turner et al. 2015.

54 ENVIRONMENTAL SCIENCES↗

Properties of deep convective clouds in the ISCCP Pilot Data Set

Statistics on tropical deep convective clouds in the International Satellite Cloud Climatology Project Pilot Data Set are compiled by binning daytime data over areas of 2 X 2.5, 4 X 5, and 8 X 10 degrees. To isolate the convective clouds, only pixels with minimum visible optical thickness of 32 and maximum cloud top pressure of 550 mb are considered. Maps of convective cloud cover and frequency of convective events and frequency histograms of deep convective cloud pixels and cloud top pressures are presented.

Del Genio, Anthony D.↗

Vela X-1 pulse timing. II - Variations in pulse frequency

The pulsed X-ray emission of Vela X-1 during May 1978 and December-January 1978-1979 is investigated analytically on the basis of published satellite observations. The data are compiled in tables and graphs and discussed in detail, with reference to data for the entire 1975-1982 period. Variations in pulse frequency are identified on time scales from 2 to 2600 days; the lower nine octaves are characterized as white noise (or random walk in pulse frequency), while the longer-period variations are attributed to changes in neutron-star rotation rates.

Deeter, J. E.↗

A global data set of soil particle size properties

A standardized global data set of soil horizon thicknesses and textures (particle size distributions) was compiled. This data set will be used by the improved ground hydrology parameterization designed for the Goddard Institute for Space Studies General Circulation Model (GISS GCM) Model 3. The data set specifies the top and bottom depths and the percent abundance of sand, silt, and clay of individual soil horizons in each of the 106 soil types cataloged for nine continental divisions. When combined with the World Soil Data File, the result is a global data set of variations in physical properties throughout the soil profile. These properties are important in the determination of water storage in individual soil horizons and exchange of water with the lower atmosphere. The incorporation of this data set into the GISS GCM should improve model performance by including more realistic variability in land-surface properties.

Webb, Robert S.↗

Geostationary Satellite Observations Over Global Environmental Monitoring Sites

Globally, there are now hundreds of ground-based environmental monitoring stations routinely collecting data on a variety of earth-atmosphere interactions. Such observations are also being augmented with data from orbiting satellites. With the beginning of the EOS-era, the MODIS subset around flux towers has been frequently used for validating ecosystem models developed at flux towers and upscaling the observed flux data to regional scales. However, MODIS on the polar-orbiting satellites can observe target regions only once a day, while the Fluxnet eddy- covariance data are compiled as sub-hourly. Therefore, summarizing the sub-hourly flux data into daily statistics is necessary for the comparison between MODIS and Flux data. The new generation geostationary satellite sensors (GOES-16/17 ABI and Himawari-8/9 AHI) have capabilities similar to MODIS but collect data at 5-15 minute intervals. These high-frequency observations allow us to understand and scale diurnal fluxes. Some studies have already shown the effective utilization of time series of geostationary satellite data for ecosystem modeling. We are producing NEX Level-1G products, which are gridded Top-of-Atmosphere reflectance and brightness temperature data from geostationary satellite sensors. We cut out the NEX Level-1G data using the same file format with the MODIS subset except for the projection. The other data products (e.g., surface reflectance, land surface temperature, vegetation indices, and climate data) will be added upon their availability. Currently included networks are Fluxnet, PhenoCam, and AERONET. The NEX subset data will be provided through NASA NEX data portal.

Geostationary Satellites↗

Usability of Pre-Flight Planning Interfaces for Supplemental Data Service Provider Tools to Support Uncrewed Aircraft System Traffic Management

Small uncrewed aircraft systems (sUASs) operate in low-altitude, uncontrolled airspace – where support services for their operators (UASOs) are not currently provided. NASA’s System-Wide Safety (SWS) project is identifying the potential risks and hazards to sUAS operations to provide, inform, and improve the designs of In-time Aviation Safety Management Systems (IASMS). The IASMS will include a suite of data-driven tools that compile and analyze data collected from aviation systems and environmental sources to predict hazards, and provide information to allow operators to mitigate these risks (Young et al., 2020). These risk and hazard services can be run and displayed to operators on graphical user interfaces (GUIs), as they relate to a vehicle(s)’ route of flight. These interfaces offer both a means to present hazard service output and offer an opportunity to test user understanding of the information, user decision making, and the best ways to present such data to an operator. Based on these future technologies and intended missions, it is important to investigate interface requirements and evaluate how operators might use these tools. Presenting salient and meaningful risk assessment information to operators is necessary to increase situation awareness and ultimately safety. Building on previous research (Feldman et al., 2022), a usability study comparing two GUIs was conducted to explore how individuals interacted with different styles of information displays. A series of pre-flight hazard and risk-assessment tasks were developed to evaluate participant performance using the Supplemental Data Service Provider Consolidated Dashboard and the Human Automation Team Interface System interfaces. Participants were trained to use both GUIs and their performance was analysed across different scenarios involving multiple sUASs. Performance on simple tasks and the System Usability Scale scores were reported by Feldman et al., 2023. Additional analyses and evaluations on more complex tasks (e.g., risk assessment, prioritization), workload and response times are examined in this paper.

sUAV interfaces↗

Usability of Pre-flight Planning Interfaces for Supplemental Data Service Provider Tools to Support Uncrewed Aircraft System Traffic Management

Small uncrewed aircraft systems (sUASs) operate in low-altitude, uncontrolled airspace – where support services for their operators (UASOs) are not currently provided. NASA’s System-Wide Safety (SWS) project is identifying the potential risks and hazards to sUAS operations to provide, inform, and improve the designs of In-time Aviation Safety Management Systems (IASMS). The IASMS will include a suite of data-driven tools that compile and analyze data collected from aviation systems and environmental sources to predict hazards, and provide information to allow operators to mitigate these risks (Young et al., 2020). These risk and hazard services can be run and displayed to operators on graphical user interfaces (GUIs), as they relate to a vehicle(s)’ route of flight. These interfaces offer both a means to present hazard service output and offer an opportunity to test user understanding of the information, user decision making, and the best ways to present such data to an operator. Based on these future technologies and intended missions, it is important to investigate interface requirements and evaluate how operators might use these tools. Presenting salient and meaningful risk assessment information to operators is necessary to increase situation awareness and ultimately safety. Building on previous research (Feldman et al., 2022), a usability study comparing two GUIs was conducted to explore how individuals interacted with different styles of information displays. A series of pre-flight hazard and risk-assessment tasks were developed to evaluate participant performance using the Supplemental Data Service Provider Consolidated Dashboard and the Human Automation Team Interface System interfaces. Participants were trained to use both GUIs and their performance was analysed across different scenarios involving multiple sUASs. Performance on simple tasks and the System Usability Scale scores were reported by Feldman et al., 2023. Additional analyses and evaluations on more complex tasks (e.g., risk assessment, prioritization), workload and response times are examined in this paper.

sUAV interfaces↗

The 2019 Edition of the ICSBEP Handbook

Over the past several decades, innumerable experiments have been performed worldwide to support criticality safety. These experiments represent significant investment in infrastructure, expertise, and cost, and are valuable resources of data for present and future research. These valuable assets provide the basis for recording, development, and validation of methods and nuclear data [1]. If the experimental data are lost, the high cost to repeat many of these measurements would likely be prohibitive. The International Criticality Safety Benchmark Evaluation Project (ICSBEP) was established to: 1. Identify a comprehensive set of critical benchmark data and, to the extent possible, verify the data; 2. Evaluate the data and quantify overall uncertainties through various types of sensitivity analyses; 3. Compile the data into a standardized format; 4. Perform calculations of each experiment with standard criticality safety codes; and 5. Formally document the work into a single source of verified benchmark critical data. Annually, contributors from around the world continue to collaborate in the evaluation and review of select benchmark experiments for inclusion in the International Handbook of Evaluated Criticality Safety Benchmark Experiments (ICSBEP Handbook) [2]. Further information regarding the ICSBEP, including highlighted criticality safety benchmark evaluations, can be found in the September and October 2003 editions of Nuclear Science and Engineering [3]. New and recently revised evaluations have been prepared for inclusion in the 2019 edition of the ICSBEP Handbook.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The 2016 Edition of the ICSBEP Handbook

Over the past several decades, numerous experiments have been performed worldwide to support criticality safety. These experiments represent a significant investment in infrastructure, expertise, and cost, and are valuable resources of data for present and future research. These valuable assets provide the basis for recording, development, and validation of methods and nuclear data. If the experimental data are lost, the high cost to repeat many of these measurements may be prohibitive. The International Criticality Safety Benchmark Evaluation Project (ICSBEP) was established to: 1. Identify a comprehensive set of critical benchmark data and, to the extent possible, verify the data; 2. Evaluate the data and quantify overall uncertainties through various types of sensitivity analyses; 3. Compile the data into a standardized format; 4. Perform calculations of each experiment with standard criticality safety codes; and 5. Formally document the work into a single source of verified benchmark critical data. Annually, contributors from around the world continue to collaborate in the evaluation and review of select benchmark experiments for inclusion in the International Handbook of Evaluated Criticality Safety Benchmark Experiments (ICSBEP Handbook). Further information regarding the ICSBEP, including highlighted criticality safety benchmark evaluations, can be found in the September and October 2003 editions of Nuclear Science and Engineering. Several new evaluations have been prepared for inclusion in the September 2016 edition of the ICSBEP Handbook. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

IUPAC-NIST Solubility Data Series. 95. Alkaline Earth Carbonates in Aqueous Systems. Part 2. Ca

The alkaline earth carbonates are an important class of minerals. This article is part of a volume in the IUPAC-NIST Solubility Data Series that compiles and critically evaluates solubility data of the alkaline earth carbonates in water and in simple aqueous electrolyte solutions. Part 1 outlined the procedure adopted in this volume, and presented the beryllium and magnesium carbonates. Part 2, the current paper, compiles and critically evaluates the solubility data of calcium carbonate. The chemical forms included are the anhydrous CaCO{sub 3} types calcite, aragonite, and vaterite, the monohydrate monohydrocalcite (CaCO{sub 3}{center_dot} H{sub 2}O), the hexahydrate ikaite (CaCO{sub 3}{center_dot}6H{sub 2}O), and an amorphous form. The data were analyzed with two model variants, and thermodynamic data of each form consistent with each of the models and with the CODATA key values for thermodynamics are presented.

36 MATERIALS SCIENCE↗

Application of community data to surface complexation modeling framework development: Iron oxide protolysis

This study presents a comprehensive community data-driven surface complexation modeling framework for simulating potentiometric titration of mineral surfaces. Compiled community data for ferrihydrite, goethite, hematite, and magnetite are fit to produce representative protolysis constants that can reproduce potentiometric titration data collected from multiple literature sources. Using this framework, the impact of surface complexation model type and surface site density (SSD) on the fit quality and protolysis constants can be readily evaluated. For example, the non-electrostatic model yielded a poor data fit compared to diffuse double layer model and constant capacitance models due to the absence of known surface charge effects. Regardless of the choice of iron oxide mineral, pK a1 decreased with increasing SSD while the opposite tendency was observed for pK a2 . This newly developed framework demonstrates a method to reconcile community data-wide potentiometric titration data using Findable, Accessible, Interoperable, Reusable data principles to produce mineral protolysis constants that improve robustness of surface complexation models for applications in metal sorption and reactive transport modeling. The framework is readily expandable (as community data increase) and extensible (as the number of minerals increase). The framework provides a path forward for developing self-consistent, comprehensive, and updateable surface complexation databases for surface complexation and reactive transport modeling.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Thermosteam: BioSTEAM's Premier Thermodynamic Engine

Thermosteam is a thermodynamic engine capable of solving mass and energy balances, estimating mixture properties, solving thermodynamic phase equilibria, and modeling stoichiometric reactions. All chemical data in Thermosteam is imported from the chemicals library, an open-source compilation of data and functions for the estimation of pure component chemical and mixture properties. Thermosteam’s fast and flexible platform has enabled the evaluation of conceptual and emerging biochemical production processes. The Biorefinery Simulation and Techno-Economic Analysis Modules (BioSTEAM) — capable of modeling reactors, distillation columns, heat exchangers, and other unit operations — has adopted Thermosteam as its premier thermodynamic engine. Published biorefinery designs modeled in BioSTEAM implement thermodynamic property packages created with Thermosteam, including a cornstover biorefinery for the production of cellulosic ethanol, a lipid-cane biorefinery for the co-production of ethanol and biodiesel, and a wheatstraw biorefinery for the production of cellulosic ethanol.

97 MATHEMATICS AND COMPUTING↗

COMPILATION OF LABORATORY SCALE ALUMINUM WASH AND LEACH REPORT RESULTS

This report compiles and analyzes all known wash and caustic leach laboratory studies. As further data is produced, this report will be updated. Included are aluminum mineralogical analysis results as well as a summation of the wash and leach procedures and results. Of the 177 underground storage tanks at Hanford, information was only available for five individual double-shell tanks, forty-one individual single-shell tanks (e.g. thirty-nine 100 series and two 200 series tanks), and twelve grouped tank wastes. Seven of the individual single-shell tank studies provided data for the percent of aluminum removal as a function of time for various caustic concentrations and leaching temperatures. It was determined that in most cases increased leaching temperature, caustic concentration, and leaching time leads to increased dissolution of leachable aluminum solids.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Cratering history of Miranda

The surface of the southern hemisphere of Miranda imaged by Voyager 2 is divisible into two general types of terrain: cratered terrain, characterized by numerous craters and undulating intercrater plains; and basins, circular to rectangular areas of complex morphology having large-scale albedo markings. To determine the relative ages of the terrains and the length of geological activity, crater-frequency data were compiled for various parts of the cratered terrain and basins. Crater-frequency data indicate that the cratered terrain is the oldest terrain on Miranda and that it was locally resurfaced.

Plescia, J. B.↗

Interplanetary medium data book: Supplement 3A, 1977-1985

Supplement 3 of the Interplanetary Medium Data Book contains a detailed discussion of a data set compilation of hourly averaged interplanetary plasma and magnetic field parameters. The discussion addresses data sources, systematic and random differences, time shifting of ISEE 3 data, and plasma normalizations. Supplement 3 also contains solar rotation plots of field and plasma parameters. Supplement 3A contains computer-generated listings of selected parameters from the composite data set. These parameters are bulk speed (km/sec), density (per cu cm), temperature (in units of 1000 K) and the IMF parameters: average magnitude, latitude and longitude angles of the vector made up of the average GSE components, GSM Cartesian components, and the vector standard deviation. The units of field magnitude, components, and standard deviation are gammas, while the units of field direction angles and degrees.

Couzens, David A.↗