Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Band gap”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Carboxyl-functionalized perovskite enables ALD growth of a compact and uniform ion migration barrier

Mixed-halide wide-band-gap perovskites are critical components of highly efficient tandem cells, but their operating stability is limited by halide migration. Metal oxides deposited via atomic layer deposition (ALD) have been shown to block halide migration; however, previously pursued methods result in inhomogeneous nucleation and growth. We hypothesized that functionalizing the perovskite surface with ALD-active carboxyl groups could promote nucleation and enable higher-temperature metal oxide growth. We find that 5-ammonium valeric acid iodide (5-AVAI) facilitates the formation of a compact and uniform aluminum oxide (Al 2 O 3 ) layer and allows growth at 100°C compared with the previous limit of 75°C. We demonstrate that halide migration into the C 60 electron transport layer is reduced by a factor of 10 compared with the reference case. Finally, Al 2 O 3 -capped perovskite solar cells with a band gap of 1.78 eV retain 90% of their initial power conversion efficiency after 1,000 h of continuous operation under 1-sun illumination at 55°C.

Al2O3↗
DOE OSTI2024

Mitigating Band Tailing in Kesterite Solar Absorbers: Ab Initio Quantum Dynamics

Open-circuit voltage deficits are limiting factors in kesterite solar cells. Addressing this issue by suppressing band tailing and nonradiative charge recombination is essential for enhancing the performance. We employ ab initio nonadiabatic molecular dynamics to elucidate the origin of band tailing and charge losses and propose a mitigation strategy. The simulations show that Cu–Zn disorder, associated with antisite defect clusters [Cu Zn +Zn Cu ], is a significant source of band tailing in kesterites, as evidenced by the much larger Urbach energy in disordered than ordered kesterites. Cu–Zn disorder gives rise to new sulfur-centered coordination polyhedra, increases structural inhomogeneity, changes electrostatic potential at sulfur centers, and shifts the S(3p) orbital energy. Differences in the S(3p)/Cu(3d) and S(3p)/Sn(5s) hybridization strengths and the S(3p) orbital energy shift reduce the band gap by 0.37 eV. Furthermore, Cu–Zn disorder enhances vibrational motion of sulfur anions and surrounding cations, increasing band gap fluctuations by 15 meV. The stronger electron–phonon interactions reduce charge carrier lifetimes and limit the kesterite solar cell efficiency. Partial substitution of Zn with Cd facilitates structural ordering and significantly suppresses band tailing, particularly in disordered systems. The improvement can be attributed to the larger atomic radius and mass of Cd, which weakens bonding around the anion, suppresses S-related vibrations within the covalent tetrahedra, and reduces nonadiabatic coupling, thereby increasing charge carrier lifetimes. The reported results establish the key influence of cation disorder on band tailing and reduced charge carrier lifetimes in kesterites and highlight cation disorder engineering as a strategy to achieve high-efficiency kesterite solar cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Chlorination of Hydrogenated Silicon Nanosheets Revealed by Solid-State Nuclear Magnetic Resonance Spectroscopy

We report two-dimensional silicon nanosheets (Si-NS) synthesized by topotactic deintercalation of CaSi 2 are hypothesized to consist of buckled layers of sp 3 -hybridized silicon atoms that are bonded to three other framework Si atoms and a terminal atom or functional group such as H, Cl, or OH. Here, we apply 1 H{ 35 Cl} and 29 Si{ 35 Cl} Resonance-Echo Saturation-Pulse DOuble-Resonance (RESPDOR) solid-state NMR experiments to directly confirm the presence of chlorinated Si atoms within Si-NS. Plotting the 1 H{ 35 Cl} RESPDOR dephasing as a function of the 35 Cl saturation pulse offset reveals that the 35 Cl quadrupolar coupling constant (C Q ) is 38 MHz, consistent with Cl atoms that are covalently bonded to silicon. Modeling the 1 H{ 35 Cl} RESPDOR dephasing curve shows that the Si–Si interlayer spacing is approximately 6 Å. Plane-wave density functional theory (DFT) calculations show that the direct band gap transition of the Si-NS decreases with increasing chlorination and hydroxylation, suggesting that the band gap of Si-NS can be tuned by modifying the terminal atoms or functional groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ab-initio simulations of coherent phonon-induced pumping of carriers in zirconium pentatelluride

Abstract Laser-driven coherent phonons can act as modulated strain fields and modify the adiabatic ground state topology of quantum materials. Here we use time-dependent first-principles and effective model calculations to simulate the effect of the coherent phonon induced by strong terahertz electric field on electronic carriers in the topological insulator ZrTe 5 . We show that a coherent A 1g Raman mode modulation can effectively pump carriers across the band gap, even though the phonon energy is about an order of magnitude smaller than the equilibrium band gap. We reveal the microscopic mechanism of this effect which occurs via Landau–Zener-Stückelberg tunneling of Bloch electrons in a narrow region in the Brillouin zone center where the transient energy gap closes when the system switches from strong to weak topological insulator. The quantum dynamics simulation results are in excellent agreement with recent pump-probe experiments in ZrTe 5 at low temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Transition-metal phthalocyanine monolayers as new Chern insulators

To explore new materials for the realization of the quantum anomalous Hall effect (QAHE), we studied the electronic, magnetic and topological properties of transition-metal phthalocyanine (TMPc) monolayers in a square lattice. Many of them have large topologically nontrivial band gaps and integer Chern numbers. In particular, the Fermi level of MoPc lies right in the band gap (E g = 8.1 meV) and has large magnetic anisotropy energy (MAE = 2.0 meV per Mo atom) and a Curie temperature of 16 K, showing its usefulness for applications. The presence of the topologically protected edge state in a MoPc nanoribbon further confirms it as a new two-dimensional topological insulator. This much widens the search for QAHE materials for the design of quantum devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS1987

Soft x ray window encapsulant for HgI2 detectors

HgI2 is an excellent semiconductor material for a low energy, room temperature x-ray spectrometer. The high values of the atomic numbers for its constituent elements gives high x-ray and gamma ray stopping power. The band gap of HgI2 is significantly higher than other commonly used semiconductors. Owing to the large value band gap, the leakage current for HgI2 devices is smaller, thus allowing low noise performance. Devices fabricated from HgI2 crystals have demonstrated energy resolution sufficient to distinguish the x-ray emission from the neighboring elements on the periodic table. Also the power requirements of HgI2 are very low. These characteristics make a HgI2 spectrometer an ideal component in a satellite based detection system. Unfortunately, HgI2 crystals tend to deteriorate with time, even if protected by standard semiconductor encapsulants. This degradation ruins the performance of the device in terms of its energy resolution and pulse amplitude. The degrading mechanism is believed to be material loss occurring from below the electrodes, due to high vapor pressure of HgI2 at room temperature. To address this major obstacle to rapid expansion of HgI2 technology, a research program aimed at improving device stability by encapsulation with inert polymeric materials was carried out. The program focused specifically on optimizing the encapsulant materials and their deposition techniques. The principal objectives for this program were device encapsulation, device testing, and accelerated testing to ensure very long term stability of these high resolution sensors. A variety of encapsulants were investigated with the selection criteria based on their chemical diffusion barrier properties, mechanical stability, reactivity, and morphology of encapsulant films. The investigation covered different classes of encapsulants including solvent based encapsulants, vapor deposited encapsulants, and plasma polymerized encapsulants. A variety of characterization techniques were employed to examine their effectiveness in stabilizing HgI2 devices; these included permeability evaluation, vacuum and heat testing, scanning electron microscopy (SEM) as well as studying the detector performance of coated detectors. The plasma polymerized films appear to have entirely solved the HgI2 degradation problem. Another achievement of this program was the development of an accelerated testing technique which correlates extremely well with long term tesing.

Entine, G.↗
DOE OSTI2020

Pressure‐Suppressed Carrier Trapping Leads to Enhanced Emission in Two‐Dimensional Perovskite (HA) 2 (GA)Pb 2 I 7

Abstract A remarkable PL enhancement by 12 fold is achieved using pressure to modulate the structure of a recently developed 2D perovskite (HA) 2 (GA)Pb 2 I 7 (HA= n ‐hexylammonium, GA=guanidinium). This structure features a previously unattainable, extremely large cage. In situ structural, spectroscopic, and theoretical analyses reveal that lattice compression under a mild pressure within 1.6 GPa considerably suppresses the carrier trapping, leading to significantly enhanced emission. Further pressurization induces a non‐luminescent amorphous yellow phase, which is retained and exhibits a continuously increasing band gap during decompression. When the pressure is released to 1.5 GPa, emission can be triggered by above‐band gap laser irradiation, accompanied by a color change from yellow to orange. The obtained orange phase could be retained at ambient conditions and exhibits two‐fold higher PL emission compared with the pristine (HA) 2 (GA)Pb 2 I 7 .

Guo, Songhao↗
DOE OSTI2023

Optical stark effect on CdSe nanoplatelets with mid-infrared excitation for large amplitude ultrafast modulation

The optical Stark effect is a universal response of the electronic structure to incident light. In semiconductors, particularly nanomaterials, the optical Stark effect achieved with sub-band gap photons can drive large, narrowband, and potentially ultrafast changes in the absorption or reflection at the band gap through excitation of virtual excitons. Rapid optical modulation using the optical Stark effect is ultimately constrained, however, by the generation of long-lived excitons through multiphoton absorption. This work compares the modulation achievable using the optical Stark effect on CdSe nanoplatelets with several different pump photon energies, from the visible to mid-infrared. Despite expected lower efficiencies for spectrally-remote pump energies, infrared pump pulses can ultimately drive larger sub-picosecond optical Stark shifts of virtual excitons without creation of real excitons. Importantly, the CdSe nanoplatelets show subpicosecond shifts of the lowest excitonic resonance of up to 22 meV, resulting in change in absorption as large as 0.32 OD (49% increase in transmission), with a long-lived offset from real excitons less than 1% of the peak signal.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Many-body electronic structure of LaScO 3 by real-space quantum Monte Carlo

We present real space quantum Monte Carlo (QMC) calculations of the scandate LaSc0 3 that proved to be challenging for traditional electronic structure approaches due to strong correlation effects resulting in inaccurate band gaps from DFT and GW methods when compared with existing experimental data. Besides calculating an accurate QMC band gap corrected for supercell size biases and in agreement with numerous experiments, we also predict the cohesive energy of the crystal using the standard fixed-node QMC without any empirical or non-variational parameters. We show that promotion (optical) gap and fundamental gap agree with each other illustrating a clear absence of significant excitonic effects in the ideal crystal. We obtained these results in perfect consistency in two independent tracks that employ different basis sets (plane wave vs. localized gaussians), different codes for generating orbitals (QUANTUM ESPRESSO vs. CRYSTAL), different QMC codes (QMCPACK vs. QWALK) and different high-accuracy pseudopotentials (ccECPs vs. Troullier-Martins) presenting the maturity and consistency of QMC methodology and tools for studies of strongly correlated problems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Ultrafast electron dynamics of graphene quantum dots: High harmonic generation

We study theoretically nonlinear optical properties of graphene quantum dots placed in a field of a short and strong linearly polarized optical pulse. We address the problem of high harmonic generation in quantum dots and how such nonlinear effect is affected by dephasing processes in a quantum dot. The dephasing makes the ultrafast electron dynamics more irreversible with a large residual population of the excited quantum dot levels. In relation to the high-harmonic spectrum, with increasing the dephasing time, the intensities of the low-frequency harmonics increase while the cutoff energy decreases. The dependence of the cutoff energy on the amplitude of the optical pulse is also sensitive to the frequency of the pulse. When the frequency of the optical pulse is much less than the quantum dot band gap, this dependence is almost linear, but when the frequency of the pulse is comparable to the band gap, the cutoff energy shows saturation behavior at large field amplitude, >0.4 V/Å.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Computational Insights into Phase Equilibria Between Wide-Gap Semiconductors and Contact Materials

Novel wide-band-gap semiconductors are needed for next-generation power electronics, but there is a gap between a promising material and a functional device. Finding stable (metal) contacts is one of the major challenges that is currently dealt with mainly via trial and error. Herein, we computationally investigate the thermochemistry and phase coexistence at the junction between three wide-gap semiconductors, ..beta..-Ga2O3, GeO2, and GaN, and possible contact materials. The pool of possible contacts includes 47 elemental metals and a set of 4 common, n-type transparent conducting oxides (ZnO, TiO2, SnO2, and In2O3). We use first-principles thermodynamics to model the Gibbs free energies of chemical reactions as a function of gas pressure (pO2/pN2) and equilibrium temperature. We deduce whether a semiconductor/contact interface will be stable at relevant conditions or a chemical reaction between them is to be expected, possibly influencing the long-term reliability and performance of devices. We generally find that most elemental metals tend to oxidize or nitridize and form various interface oxide/nitride layers. Exceptions include select late- and post-transition metals and, in the case of GaN, also the alkali metals, which are predicted to exhibit stable coexistence, although in many cases at relatively low gas partial pressures. Similar is true for the transparent conducting oxides, for which, in most cases, we predict a preference toward forming ternary oxides when in contact with ..beta..-Ga2O3 and GeO2. The only exception is SnO2, which we find to form stable contacts with both oxides. Finally, we show how the same approach can be used to predict gas partial pressure vs temperature phase diagrams to help direct synthesis of ternary compounds. We believe these results provide a valuable guidance in selecting contact materials to wide-gap semiconductors and suitable growth conditions.

contact materials↗
NASA NTRS2012

Development of Field-Controlled Smart Optic Materials (ScN, AlN) with Rare Earth Dopants

The purpose of this investigation is to develop the fundamental materials and fabrication technology for field-controlled spectrally active optics that are essential for industry, NASA, and DOD applications such as: membrane optics, filters for LIDARs, windows for sensors, telescopes, spectroscopes, cameras, flat-panel displays, etc. ScN and AlN thin films were fabricated on c-axis Sapphire (0001) or quartz substrate with the RF and DC magnetron sputtering. The crystal structure of AlN in fcc (rocksalt) and hcp (wurtzite) were controlled. Advanced electrical characterizations were performed, including I-V and Hall Effect Measurement. ScN film has a free carrier density of 5.8 x 10(exp 20)/per cubic centimeter and a conductivity of 1.1 x 10(exp 3) per centimeter. The background ntype conductivity of as-grown ScN has enough free electrons that can readily interact with the photons. The high density of free electrons and relatively low mobility indicate that these films contain a high level of shallow donors as well as deep levels. Also, the UV-Vis spectrum of ScN and AlN thin films with rare earth elements (Er or Ho) were measured at room temperature. Their optical band gaps were estimated to be about 2.33eV and 2.24eV, respectively, which are obviously smaller than that of undoped thin film ScN (2.4eV). The red-shifted absorption onset gives direct evidence for the decrease of band gap (Eg) and the energy broadening of valence band states are attributable to the doping. As the doped elements enter the ScN crystal lattices, the localized band edge states form at the doped sites with a reduction of Eg. Using a variable angle spectroscopic ellipsometer, the decrease in refractive index with applied field is observed with a smaller shift in absorption coefficient.

Kim, Hyun-Jung↗
DOE OSTI2020

Visualizing Orbital Content of Electronic Bands in Anisotropic 2D Semiconducting ReSe 2

Many properties of layered materials change as they are thinned from their bulk forms down to single layers, with examples including indirect-to-direct band gap transition in 2H semiconducting transition metal dichalcogenides as well as thickness-dependent changes in the valence band structure in post-transition-metal monochalcogenides and black phosphorus. Here, we use angle-resolved photoemission spectroscopy to study the electronic band structure of monolayer ReSe 2 , a semiconductor with a distorted 1T structure and in-plane anisotropy. By changing the polarization of incoming photons, we demonstrate that for ReSe 2 , in contrast to the 2H materials, the out-of-plane transition metal dz2 and chalcogen pz orbitals do not contribute significantly to the top of the valence band, which explains the reported weak changes in the electronic structure of this compound as a function of layer number. We estimate a band gap of 1.7 eV in pristine ReSe 2 using scanning tunneling spectroscopy and explore the implications on the gap following surface doping with potassium. Additionally, a lower bound of 1.4 eV is estimated for the gap in the fully doped case, suggesting that doping-dependent many-body effects significantly affect the electronic properties of ReSe 2 . Our results, supported by density functional theory calculations, provide insight into the mechanisms behind polarization-dependent optical properties of rhenium dichalcogenides and highlight their place among two-dimensional crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Combined First-Principles Calculations of Electron–Electron and Electron–Phonon Self-Energies in Condensed Systems

In this work, we present a method to efficiently combine the computation of electron–electron and electron–phonon self-energies, which enables the evaluation of electron–phonon coupling at the G 0 W 0 level of theory for systems with hundreds of atoms. In addition, our approach, which is a generalization of a method recently proposed for molecules [J. Chem. Theory Comput.2018, 14, 6269–6275], enables the inclusion of nonadiabatic and temperature effects at no additional computational cost. We present results for diamond and defects in diamond and discuss the importance of numerically accurate G 0 W 0 band structures to obtain robust predictions of zero point renormalization (ZPR) of band gaps, and of the inclusion of nonadiabatic effects to accurately compute the ZPR of defect states in the band gap.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Additive-assisted synthesis and optoelectronic properties of (CH 3 NH 3 ) 4 Bi 6 I 22

Hybrid organic-inorganic halides containing Bi and Sb generally exhibit higher stability and lower toxicity compared to Pb analogues. Here, in this work, synthesis, crystal and electronic structures and optical properties of a brand-new methylammonium bismuth iodide, (MA) 4 Bi 6 I 22 (MA + = CH 3 NH 3 + ), are reported. Interestingly, we find that the presence of the HgI2 is necessary for the targeted preparation of (MA) 4 Bi 6 I 22 . (MA) 4 Bi 6 I 22 contains isolated [Bi 6 I 22 ] 4- clusters made of six edge-sharing octahedral BiI6 units, which are separated by MA + cations in its 0D crystal structure. A relatively low optical band gap of 1.9 eV was estimated for (MA) 4 Bi 6 I 22 based on diffuse reflectance measurements. An intense photoluminescence peak emerges at 636 nm at low temperatures that supports the assigned band gap value. Electronic structure calculations show the presence of flat bands in the valence and conduction bands, consistent with the low-dimensional structure of (MA) 4 Bi 6 I 22 , and slightly indirect nature of the bandgap. Our findings suggest that the use of facilitator moieties such as HgI 2 may provide a pathway to obtaining alternative methylammonium bismuth iodides to (MA) 3 Bi 2 I 9 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1994

Electronic characterization of defects in narrow gap semiconductors

We use a Green's function technique to calculate the position of deep defects in narrow gap semiconductors. We consider substitutional (including antisite), vacancy, and interstitial (self and foreign) deep defects. We also use perturbation theory to look at the effect of nonparabolic bands on shallow defect energies and find nonparabolicity can increase the binding by 10 percent or so. We consider mercury cadmium telluride (MCT), mercury zinc telluride (MZT), and mercury zinc selenide (MZS). For substitutional and interstitial defects we look at the situation with and without relaxation. For substitutional impurities in MCT, MZT, and MZS, we consider x (the concentration of Cd or Zn) in the range 0.1 less than x less than 0.3 and also consider appropriate x so E(sub g) = 0.1 eV for each of the three compounds. We consider several cation site s-like deep levels and anion site p-like levels. For E(sub g) = 0.1 eV, we also consider the effects of relaxation. Similar comments apply to the interstitial deep levels whereas no relaxation is considered for the ideal vacancy model. Relaxation effects can be greater for the interstitial than the substitutional cases. Specific results are given in figures and tables and comparison to experiment is made in a limited number of cases. We find, for example, that I, Se, S, Rn, and N are possible cation site, s-like deep levels in MCT and Zn and Mg are for anion site, p-like levels (both levels for substitutional cases). The corresponding cation and anion site levels for interstitial deep defects are (Au, Ag, Hg, Cd, Cu, Zn) and (N, Ar, O, F). For the substitutional cases we have some examples of relaxation moving the levels into the band gap, whereas for the interstitial case we have examples where relaxation moves it out of the band gap. Future work involves calculating the effects of charge state interaction and seeing the effect of relaxation on vacancy levels.

Patterson, James D.↗
NASA NTRS1986

Auger electron spectroscopy, secondary ion mass spectroscopy and optical characterization of a-C-H and BN films

The amorphous dielectrics a-C:H and BN were deposited on III-V semiconductors. Optical band gaps as high as 3 eV were measured for a-C:H generated by C4H10 plasmas; a comparison was made with bad gaps obtained from films prepared by CH4 glow discharges. The ion beam deposited BN films exhibited amorphous behavior with band gaps on the order of 5 eV. Film compositions were studied by Auger electron spectroscopy (AES), x-ray photoelectron spectroscopy (XPS) and secondary ion mass spectrometry (SIMS). The optical properties were characterized by ellipsometry, UV/VIS absorption, and IR reflection and transmission. Etching rates of a-C:H subjected to O2 dicharges were determined.

Pouch, J. J.↗