Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BRITTLENESS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

The effect of strain rate and temperature on the tensile properties of NiAl

Tensile testing of cast and extruded binary NiAl was performed from 300 to 900 K at strain rates of 0.00014 to 0.14/s. The brittle-to-ductile transition temperature (BDTT) was dependent on strain rate, with a three-order-of-magnitude increase in strain rate resulting in approximately a 200-K increase in transition temperature. Regardless of strain rate, at temperatures just above the BDTT the fracture strength increased significantly and the fracture morphology changed from mostly intergranular to predominantly transgranular. It was also determined that the mechanism responsible for the brittle-to-ductile transition in NiAl had an apparent activation energy of approximately 118 kJ/mol. These results support the argument that the mechanism for the brittle-to-ductile transition in NiAl is associated with the onset of thermally activated deformation process. This process is probably dislocation climb controlled by short circuit diffusion.

Noebe, R. D.↗

A polyimide molecular composite

A polyimide is a hard and sturdy thermoplastic made from the combination of tetracarboxylic dianhydrides and diamines in a polar aprotic solvent. A series of polyimide blends comprising of a tough moldable, wholly aromatic polyimide and a highly crystalline rigid polyimide were prepared. The flexible polyimide was based on LaRC-SI with a 2% offset, and the rigid polyimide as based on para-phenylenediamine and biphenyltetracarboxylic dinnhydride encapped with pthalic anhydride. The polyimide blends were cast as films and cured at 100, 200, and 300 C in air. These films were characterized by finding their glass-transition temperature, melting temperature, coefficient of thermal expansion, tensile modulus, tensile strength, and percent elongation. These characterizations found out which polyimide blend had exceptional mechanical and thermal properties. Experimental results showed the following: (1) A blend with increasing amounts of flexible polyimide produced a better film; (2) A blend with increasing amounts of rigid polyimide produced a brittle film; (3) LaRC-SI (2% offset) tended to phase separate during film casting; (4) Most of the films produced were brittle; and (5) There was an inability to obtain mechanical and thermal properties due to having brittle film. These conclusions demonstrate the difficulty in producing a polyimide blend comprising two physically distinct polyimides. Combining a polysmide with a poly(amic acid) thermosett could be the next phase of research in polyimide synthesis.

Hart, Aprill J.↗

Award-Winning CARES/Life Ceramics Durability Evaluation Software Is Making Advanced Technology Accessible

Products made from advanced ceramics show great promise for revolutionizing aerospace and terrestrial propulsion and power generation. However, ceramic components are difficult to design because brittle materials in general have widely varying strength values. The CARES/Life software developed at the NASA Lewis Research Center eases this by providing a tool that uses probabilistic reliability analysis techniques to optimize the design and manufacture of brittle material components. CARES/Life is an integrated package that predicts the probability of a monolithic ceramic component's failure as a function of its time in service. It couples commercial finite element programs--which resolve a component's temperature and stress distribution - with reliability evaluation and fracture mechanics routines for modeling strength - limiting defects. These routines are based on calculations of the probabilistic nature of the brittle material's strength.

Source record↗

Integrity of Ceramic Parts Predicted When Loads and Temperatures Fluctuate Over Time

Brittle materials are being used, and being considered for use, for a wide variety of high performance applications that operate in harsh environments, including static and rotating turbine parts for unmanned aerial vehicles, auxiliary power units, and distributed power generation. Other applications include thermal protection systems, dental prosthetics, fuel cells, oxygen transport membranes, radomes, and microelectromechanical systems (MEMS). In order for these high-technology ceramics to be used successfully for structural applications that push the envelope of materials capabilities, design engineers must consider that brittle materials are designed and analyzed differently than metallic materials. Unlike ductile metals, brittle materials display a stochastic strength response because of the combination of low fracture toughness and the random nature of the size, orientation, and distribution of inherent microscopic flaws. This plus the fact that the strength of a component under load may degrade over time because of slow crack growth means that a probabilistic-based life-prediction methodology must be used when the tradeoffs of failure probability, performance, and useful life are being optimized. The CARES/Life code (which was developed at the NASA Glenn Research Center) predicts the probability of ceramic components failing from spontaneous catastrophic rupture when these components are subjected to multiaxial loading and slow crack growth conditions. Enhancements to CARES/Life now allow for the component survival probability to be calculated when loading and temperature vary over time.

Nemeth, Noel N.↗

Molecular-dynamics Simulation-based Cohesive Zone Representation of Intergranular Fracture Processes in Aluminum

A traction-displacement relationship that may be embedded into a cohesive zone model for microscale problems of intergranular fracture is extracted from atomistic molecular-dynamics simulations. A molecular-dynamics model for crack propagation under steady-state conditions is developed to analyze intergranular fracture along a flat 99 [1 1 0] symmetric tilt grain boundary in aluminum. Under hydrostatic tensile load, the simulation reveals asymmetric crack propagation in the two opposite directions along the grain boundary. In one direction, the crack propagates in a brittle manner by cleavage with very little or no dislocation emission, and in the other direction, the propagation is ductile through the mechanism of deformation twinning. This behavior is consistent with the Rice criterion for cleavage vs. dislocation blunting transition at the crack tip. The preference for twinning to dislocation slip is in agreement with the predictions of the Tadmor and Hai criterion. A comparison with finite element calculations shows that while the stress field around the brittle crack tip follows the expected elastic solution for the given boundary conditions of the model, the stress field around the twinning crack tip has a strong plastic contribution. Through the definition of a Cohesive-Zone-Volume-Element an atomistic analog to a continuum cohesive zone model element - the results from the molecular-dynamics simulation are recast to obtain an average continuum traction-displacement relationship to represent cohesive zone interaction along a characteristic length of the grain boundary interface for the cases of ductile and brittle decohesion. Keywords: Crack-tip plasticity; Cohesive zone model; Grain boundary decohesion; Intergranular fracture; Molecular-dynamics simulation

Yamakov, Vesselin I.↗

Accounting for Uncertainties in Strengths of SiC MEMS Parts

A methodology has been devised for accounting for uncertainties in the strengths of silicon carbide structural components of microelectromechanical systems (MEMS). The methodology enables prediction of the probabilistic strengths of complexly shaped MEMS parts using data from tests of simple specimens. This methodology is intended to serve as a part of a rational basis for designing SiC MEMS, supplementing methodologies that have been borrowed from the art of designing macroscopic brittle material structures. The need for this or a similar methodology arises as a consequence of the fundamental nature of MEMS and the brittle silicon-based materials of which they are typically fabricated. When tested to fracture, MEMS and structural components thereof show wide part-to-part scatter in strength. The methodology involves the use of the Ceramics Analysis and Reliability Evaluation of Structures Life (CARES/Life) software in conjunction with the ANSYS Probabilistic Design System (PDS) software to simulate or predict the strength responses of brittle material components while simultaneously accounting for the effects of variability of geometrical features on the strength responses. As such, the methodology involves the use of an extended version of the ANSYS/CARES/PDS software system described in Probabilistic Prediction of Lifetimes of Ceramic Parts (LEW-17682-1/4-1), Software Tech Briefs supplement to NASA Tech Briefs, Vol. 30, No. 9 (September 2006), page 10. The ANSYS PDS software enables the ANSYS finite-element-analysis program to account for uncertainty in the design-and analysis process. The ANSYS PDS software accounts for uncertainty in material properties, dimensions, and loading by assigning probabilistic distributions to user-specified model parameters and performing simulations using various sampling techniques.

Nemeth, Noel↗

A Comparison of Materials Issues for Cermet and Graphite-Based NTP Fuels

This paper compares material issues for cermet and graphite fuel elements. In particular, two issues in NTP fuel element performance are considered here: ductile to brittle transition in relation to crack propagation, and orificing individual coolant channels in fuel elements. Their relevance to fuel element performance is supported by considering material properties, experimental data, and results from multidisciplinary fluid/thermal/structural simulations. Ductile to brittle transition results in a fuel element region prone to brittle fracture under stress, while outside this region, stresses lead to deformation and resilience under stress. Poor coolant distribution between fuel element channels can increase stresses in certain channels. NERVA fuel element experimental results are consistent with this interpretation. An understanding of these mechanisms will help interpret fuel element testing results.

Nuclear Propulsion↗

Electron Beam Welding of Pure Tungsten Hex Cans for Nuclear Thermal Propulsion Engines

Nuclear thermal propulsion (NTP) is an in-space propulsion method currently being developed at the NASA Marshall Space Flight Center (MSFC). NTP systems are a high specific impulse (750–1,100 s), high thrust (15,000–250,000 lbf ) method of propulsion which have the potential to allow for faster transit times when optimizing for high ΔV. In the nuclear rocket engine, the heat from the nuclear fission reaction is transferred to a low molecular mass propellant (such as hydrogen). Hot propellant is expanded through a nozzle to generate thrust. Development of ceramic metal (cermet) fuel systems for NTP applications is currently ongoing at MSFC. In cermet fuel systems, ceramic fissile fuel particles such as uranium nitride or uranium dioxide are dispersed within a net-shaped, high-density structural matrix. The composite material is cladded by a protective metal structure to make up an NTP fuel element. Cladding materials must be able to withstand the demanding operating conditions required of the engine as well as retain a hermetic seal to allow for retention of fuel element structural integrity, prevent hydrogen attack or migration of the ceramic fuel, and limit release of fission products during operation. For NTP applications, tungsten is a prime material for both the metal matrix and cladding in cermet fuel systems because of its high melting point, high temperature strength, and compatibility with hot hydrogen. If a weld in tungsten with the capability of holding a hermetic seal is achievable, tungsten becomes a strong candidate for NTP applications. This Technical Memorandum focuses on determining the weldability of pure tungsten using electron beam welding (EBW). Tungsten appears well suited for NTP applications, but it has a high ductile to brittle transition temperature (DBTT) dependent upon chemical composition, structure/stress distribution, and mechanical conditions. Therefore, it is highly subject to brittle fracture. Because of its high susceptibility to brittle fracture, it is very difficult to weld. EBW was chosen for joining pure tungsten because of its low heat input compared to gas tungsten arc welding. Reduced heat input can be directly correlated with an increase in ductility of a tungsten weld. EBW is a high energy density welding process in which a stream of electrons penetrates a weld joint in a deep, narrow spike in contrast to a broad gas tungsten arc weld pool. The investigation initially focused on EBW of tungsten plates of both 0.01 in and 0.03 in thickness to determine if EBW could weld pure tungsten without the presence of visual defects—particularly cracking—in the welds. Variation in the weld procedure and post-weld heat treatment (PWHT) was used to improve the surface appearance of flat EBWs on a pure tungsten sheet. The investigation moved on to weld 0.05-in-thick hexagonal tungsten cans with a weld joint thickness of 0.025 in. The goal for welding the pure tungsten hex cans was to avoid any visual surface defects and generate a weld capable of a hermetic seal. This proved difficult. Cold welds commonly exhibited porosity that leaked air. Hot welds exhibited cracks, typically observed immediately after welding. Later welds were preheated to increase ductility and decrease the likelihood of through-thickness cracking. PWHT was used to arrest microcrack growth both in the flat weld samples and hexagonal weld samples.

Courtright, Z. S.↗

Erosion Behavior of Ti-hBN Multifunctional Coatings in A Custom-Made Planetary Test Rig at Extreme Lunar Temperatures

Spacecraft landings and takeoffs on the lunar surface, along with extreme temperature variations between day and night (-196 to 150° C), cause high-velocity dust impacts and erosion, resulting in the premature failure of structures. Ti/2 vol% hBN coatings were deposited using atmospheric (APS) and vacuum plasma spray (VPS) using cryo-milled powder feedstock to protect the structural components. The erosion performance of coatings at extreme lunar temperature regimes (-150 to 150° C) was evaluated in a custom-made planetary erosion test rig (PETR) at low (50 mph) and high impact velocities (250 mph). The mass loss of VPS coatings was reduced by 50% compared to the APS coatings and 40% compared to the Ti6Al4V substrate. The cryogenic temperature induces brittleness in the material, rendering it susceptible to extreme conditions of material loss. The particle impact-deformation behavior was captured using a high-speed camera to study the erosion mechanism. This analysis revealed chipping in substrates and brittle APS coatings, while particles rebounding and embedding were observed in VPS coatings. Energy calculations, aided by particle trajectory tracking from the high-speed camera, have conclusively shown that VPS coatings absorb 5–10% more energy than APS coatings during erosion tests. A modified erosion index was developed incorporating the fracture toughness and temperatures. New erosion models for brittle and ductile target materials are proposed for developing erosion-resistant material systems.

Abhijith Kunneparambil Sukumaran↗

ROCK DEFORMATION 2010 GORDON RESEARCH CONFERENCE, AUGUST 8-13, 2010

Creep in the crust and mantle is commonly considered a steady-state process. This view prevails despite the fact that earthquakes do not represent steady-state and at the base of the seismogenic zone, for example, the stresses that drive creep must vary with the earthquake cycle. The contribution of transient versus steady-state behavior is not easy to determine from naturally-deformed brittle or plastic rocks and our view of steady-state depends on whether we consider geological or shorter time-scales. Perhaps we avoid a non steady-state picture because we lack appropriate descriptive or quantitative tools. The aim of the 2010 Gordon Research Conference (GRC) in rock deformation is to explore what we know about non steady-state deformation and how we might advance our understanding through geological and geophysical field investigations, laboratory experiments and modeling. This will require an appraisal of the applicability of steady-state concepts as well as an exploration of transient behavior, in which processes and physical properties cycle between different states as might be the case during earthquake cycles, and transitions in behavior, where finite strain or changing environmental conditions lead to changes in processes and properties. Conference sessions will cover seven broad and interlinked topics. (1) What is steady state?; an appraisal of applicability of the steady-state concept in rock deformation. (2) Seismogenic Faulting and Brittle Fault Rocks; where transience in rates and conditions are accepted but not fully understood. (3) Episodic Creep During the Seismic Cycle; with a focus on processes in areas adjacent to the base of the seismogenic zone. (4) Creep in Zones of Stress and Temperature Cycling; considering deformation in real-world complex systems (5) Deformation, Metamorphism, and Fluids; exploring the interaction of diagenesis/metamorphism and thermal instabilities with deformation. (6) Mechanism and Microstructure Transitions During Deformation; quantifying evolution as a function of strain and associated with changes in deformation kinematics or conditions. (7) Mechanism and Microstructure Transitions Related to Mantle Geophysics; with a focus on the link between mechanisms affecting processes on geological time-scales on the time-scales associated with seismic wave propagation. The GRC on Rock Deformation aims to bring together researchers with diverse expertise, and to shape the scientific debate and provide inspiration for young researchers to fill the still extensive gaps in our knowledge of how the Earth deforms. The processes that will be discussed have wide applications in both basic and applied research. A key issue, of fundamental importance to our understanding of the Earth, for discussion at this meeting will be the transition from time-dependent (and distributed) rock deformation, including both high temperature creep and brittle creep, to episodic (and more localized) events. Such transitions have both a scientific and a socio-economic impact since they control the precursory phases of important geohazards such as earthquake rupture and volcanic eruptions, and also influence effective recovery of hydrocarbon and geothermal energy resources, and the integrity of long-term storage facilities for hazardous waste.

15 GEOTHERMAL ENERGY↗

Investigation on the Influence of EVA Content on the Mechanical and Thermal Characteristics of Poly(lactic acid) Blends

Poly(lactic acid) (PLA) has gained considerable attention nowadays as a biocompatible polymer owing to its advantage of being prepared from renewable resources. PLA exhibits excellent tensile strength, fabricability, thermal plasticity and biocompatibility properties comparable to many petroleum based plastics. However, low heat distortion temperature, brittleness and slow crystallization rate limit the practical applications of PLA. In order to address these limitations, an attempt has been made in the current work to prepare binary blends of PLA with ethylene vinyl acetate (EVA) at different compositions via melt mixing technique. Systematic investigation on the mechanical properties, thermal degradation and crystallization behavior for PLA-EVA blends was carried out. The impact strength of binary blends of PLA–EVA was found to increase significantly by 176% for 15 wt% of EVA compared to virgin PLA. This is due to the strong interfacial adhesion among PLA and EVA resulting in brittle to ductile transition. Scanning electron microscopy analysis for impact fractured surfaces of binary blends of PLA implied the toughening effect of PLA by EVA. Thermogravimetry analysis results revealed that the activation energy of PLA–EVA blends decreased with increase in EVA content in the PLA matrix. While, differential scanning calorimetry results obtained for PLA–EVA blends revealed the improvement in crystallinity when compared with neat PLA. The effect of EVA on non-isothermal melt crystallization kinetics of PLA was also examined via DSC at various heating rates. Decreasing trend in the t{sub 1/2} values indicated the faster rate of crystallization mechanism after addition of EVA in the PLA matrix.

36 MATERIALS SCIENCE↗

Enhanced Impact Toughness at Ambient Temperatures of Ultrafine-Grained Al-26 wt.% Si Alloy Produced by Equal-Channel Angular Pressing

Overcoming general brittleness of hypereutectic Al-Si alloys is in urgent need for expanding their application in automotive, aerospace and construction industries. A unique phenomenon was observed that bulk ultrafine-grained Al-26 wt.% Si alloy, produced by severe plastic deformation via equal-channel angular pressing, exhibited higher toughness at the impact temperature of − 196 ~ 100 °C than the coarse-grained casting alloy. The improvement in impact toughness at all testing temperatures was mainly due to the homogeneous ultrafine-grained structure with the breakage of brittle primary silicon crystals, which generated more and deeper fracture dimples that consumed much higher fracture energy. It indicates the advantage of bulk ultrafine-grained Al-Si alloys and spurs their application interest at various ambient temperatures.

36 MATERIALS SCIENCE↗

Nanoindentation Stress–Strain for Fracture Analysis and Computational Modeling for Hardness and Modulus

Stress–Strain plots based on nanoindentation load–depth curves were obtained to study phenomena like internal fracture and ductile to brittle transitions. Fracture phenomena during the indentation process were analyzed based on the stress–strain plots. A transition from ductile to brittle fracture was observed on increasing the depth or load of indenter penetration. A new approach with shape factors in the fracture studies based on radial crack branching and micro-cracking was done. Hardness and modulus plots were fitted with polynomials. The fitting parameters were varied to obtain different hardness and modulus responses.

36 MATERIALS SCIENCE↗

First-principles study of the structural and elastic properties of Cr{sub 2}AlX (X=N, C) compounds

The structural, electronic and elastic properties of Cr{sub 2}AlX, with X=N, C, have been investigated at the density functional theory level by applying a plane-wave pseudopotential approach. The band structure and density of states reveal the metallic features of Cr{sub 2}AlX. The total and projected density of states indicate that the bonding is achieved through a hybridization of Cr 3d states with Al and X-atom p states. The Cr 3d-X2p bonds are lower in energy and are stiffer than Cr 3d-Al 3p bonds. The charge density distributions indicate that there exist soft Cr-Al and relatively strong Cr-X covalent bonds, which might be responsible for their hardness. The elastic constants were obtained in the pressure range 0-100 GPa, and satisfy the stability conditions for hexagonal crystal, which indicates that these two compounds are stable in the pressure regime studied. By analyzing bulk modulus to shear modulus ratio and Cauchy pressure, Cr{sub 2}AlC is predicted to be brittleness and Cr{sub 2}AlN is ductile. The Debye temperature was obtained from the average sound velocity. - Graphical abstract: The heterogeneity of chemical bonds in Cr{sub 2}AlX (X=N, C) is observed: soft Cr-Al and relatively strong Cr-X covalent bonds might be contributed to their hardness. Highlights: Black-Right-Pointing-Pointer Cr 3d-X2p (X=N, C) bonds are lower in energy and stiffer than Cr 3d-Al 3p bonds for Cr{sub 2}AlX. Black-Right-Pointing-Pointer The hardness of Cr{sub 2}AlX might be ascribed to soft Cr-Al and relatively strong Cr-X covalent bonds. Black-Right-Pointing-Pointer The predicted brittleness of Cr{sub 2}AlC and ductility of Cr{sub 2}AlN originated from their novel structure.

36 MATERIALS SCIENCE↗

Prediction of novel hard phases of Si{sub 3}N{sub 4}: First-principles calculations

Exploration of novel hard metastable phases of silicon nitride was performed using a recently developed particle-swarm optimization method within the CALYPSO software package. Three potential hard metastable phases of t-Si{sub 3}N{sub 4}, m-Si{sub 3}N{sub 4}, and o-Si{sub 3}N{sub 4} were predicted. These phases are mechanically and dynamically stable at ambient pressure based on their elastic constants and phonon dispersions. t-Si{sub 3}N{sub 4} and m-Si{sub 3}N{sub 4} exhibit lower energies than γ-Si{sub 3}N{sub 4} at pressures below 2.5 GPa and 2.9 GPa, respectively, which promise that the formers could be obtained by quenching from γ-Si{sub 3}N{sub 4}. o-Si{sub 3}N{sub 4} is a better high-pressure metastable phase than CaTi{sub 2}O{sub 4}-type Si{sub 3}N{sub 4} proposed by Tatsumi et al. and it can come from the transition of γ-Si{sub 3}N{sub 4} under 198 GPa. The theoretical band gaps of t-Si{sub 3}N{sub 4}, m-Si{sub 3}N{sub 4}, and o-Si{sub 3}N{sub 4} at ambient pressure were 3.15 eV, 3.90 eV, and 3.36 eV, respectively. At ambient pressure, the Vickers hardness values of t-Si{sub 3}N{sub 4} (32.6 GPa), m-Si{sub 3}N{sub 4} (31.5 GPa), and o-Si{sub 3}N{sub 4} (36.1 GPa) are comparable to β-Si{sub 3}N{sub 4} and γ-Si{sub 3}N{sub 4}. With the pressure increasing, t-Si{sub 3}N{sub 4}, m-Si{sub 3}N{sub 4}, and o-Si{sub 3}N{sub 4} will change from the brittle to ductile state at about 15.7 GPa, 7.3 GPa and 28.9 GPa, respectively. - Graphical abstract: This figure shows the crystal structures of three Si{sub 3}N{sub 4} predicted in this manuscript, and left to right: t-Si{sub 3}N{sub 4}, m-Si{sub 3}N{sub 4} and o-Si{sub 3}N{sub 4}. - Highlights: • We explored three metastable phases of Si{sub 3}N{sub 4} — t-Si{sub 3}N{sub 4}, m-Si{sub 3}N{sub 4}, and o-Si{sub 3}N{sub 4}. • The enthalpies of t and m- are much lower than that of γ at ambient pressure. • ois one further high pressure phase than γ. • o-Si{sub 3}N{sub 4} is the most hardest phase in Si{sub 3}N4 system. • Increasing pressure will change them from brittle to ductile state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Application of atomic force microscopy in determining the fractal dimension of the mirror, mist, and hackle region of silica glass

Fractal analysis has been used as a method to study fracture surfaces of brittle materials. However, it has not been determined if the fractal characteristics of brittle materials is consistent throughout the fracture surface. Therefore, the fractal dimensional increment of the mirror, mist, and hackle regions of the fracture surface of silica glass was determined using atomic force microscopy. The fractal dimensional increment of the mirror region (0.17-0.26) was determined to be statistically greater than that for the mist (0.08-0.12) and hackle (0.08-0.13) regions. It is thought that the increase in the fractal dimensional increment is caused by a greater tortuosity in the mirror region due to, most likely, the slower crack velocity of the propagating crack in that region and that there is a point between the mirror and mist region at which the fractal dimension decreases and becomes constant. - Research Highlights: {yields} The fracture surface of silica glass does not have a constant fractal dimension. {yields} Mirror region has greater fractal dimension than mist or hackle region. {yields} Fractal dimension decreases between mirror and mist region. {yields} Greater fractal dimension could be due to slower crack velocity in mirror region.

36 MATERIALS SCIENCE↗

In situ investigation of the tensile deformation of laser welded Ti{sub 2}AlNb joints

The tensile deformation behavior of laser welded Ti{sub 2}AlNb joints was investigated using in situ analysis methods. The fracture mode of the single-B2-phase fusion zone was quasi-cleavage at room temperature and intergranular at 650 °C, while that of base metal was microvoid coalescence at both room temperature and 650 °C. Tensile deformation at room temperature was observed using in situ SEM tensile testing. In base metal, microcracks nucleated and propagated mainly within the O phase or along O/B2 phase boundaries. While both the cross- and multi-slips were found in the single-B2-phase fusion zone, a confocal laser scanning microscopy was used to observe the crack initiation and propagation process in situ at 650 °C. Cracks mainly formed along the B2/O phase boundaries in base metal, along the fragile grain boundaries of B2 phase in the fusion zone. The thermal simulation experiment and following TEM analysis indicated that the precipitation of continuous O-phase films along the B2 grain boundaries resulted in the high temperature brittleness of laser welded Ti{sub 2}AlNb joints. - Highlights: •Cracks formed within O phase or along B2/O boundaries in the base metal. •Cross- and multi-slips relieved stress in the fusion zone at room temperature. •Cracks mainly formed along the B2/O boundaries at 650 °C. •In the fusion zone, intergranular cracks were in situ observed at 650 °C. •O-phase films along B2 grain boundaries caused the high temperature brittleness.

36 MATERIALS SCIENCE↗

Mechanical Failure of Thin Ta and Cu/Ta Layers on Polyimide Substrates: A Synchrotron-Based Technique for In Situ Characterization

In situ synchrotron radiation diffraction and confocal light microscopy is used to study fragmentation and buckling of thin brittle Ta layers with thicknesses of 50 nm, 100 nm and 200 nm on polyimide substrates. Synchrotron-based stress measurements confirm that cracking leads to relaxation of tensile stress. Simultaneously, compressive stress arises in transverse direction, which finally leads to buckling. This behavior can be explained quantitatively by a two-dimensional shear lag model. It is well established that the properties of the coating-substrate interface determine the processes of coating fragmentation and delamination. A possible approach for influencing and controlling these processes is given by the incorporation of a ductile interlayer. It can be observed that the presence of Cu interlayers with thicknesses of 5 nm, 20 nm and 50 nm reduces the fracture strength of brittle Ta coatings on polyimide substrates, whereas the resistance to buckling is increased significantly.

36 MATERIALS SCIENCE↗