Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BIOFUELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

National Alliance for Advanced Biofuels and Bio-Products Final Technical Report

The main objective of NAABB was to combine science, technology, and engineering expertise from across the nation to break down critical technical barriers to commercialization of algae-based biofuels. The approach was to address technology development across the entire value chain of algal biofuels production, from selection of strains to cultivation, harvesting, extraction, fuel conversion, and agricultural coproduct production. Sustainable practices and financial feasibility assessments ununderscored the approach and drove the technology development.

09 BIOMASS FUELS↗

2013 Survey of Non-Starch Ethanol and Renewable Hydrocarbon Biofuels Producers

In order to understand the status of the industry for non-starch ethanol and renewable hydrocarbon biofuels as of the end of calendar year 2013, the National Renewable Energy Laboratory (NREL) conducted the first of what is anticipated to be an annual survey of U.S. non-starch ethanol and renewable hydrocarbon biofuels producers. This report presents the results of this initial survey and describes the survey methodology. Subsequent surveys will report on the progress over time of the development of these facilities and companies.

09 BIOMASS FUELS↗

National Alliance for Advance Biofuels and Bio-Products Final Technical Report Addendum Hydrothermal Processing Pilot System

The main objective of the NAABB was to combine science, technology, and engineering expertise from across the nation to break down critical technical barriers to commercialization of algae-based biofuels. As a part of the consortium, Genifuel’s NAABB goals was to fabricate and demonstrate a pilot-scale system to convert algae into fuels. The purpose of this pilot system was to show that processes developed in the laboratory at bench-scale during the program could be successfully scaled up to a pre-commercial level, and thereby provide visibility into the ultimate viability and cost of algae biofuels. The pilot system has now been completed and tested, and this report documents what has been achieved.

09 BIOMASS FUELS↗

Consortium for Algal Biofuel Commercialization (CAB-COMM) Final Report

The Consortium for Algal Biofuel Commercialization (CAB-Comm) was established in 2010 to conduct research to enable commercial viability of alternative liquid fuels produced from algal biomass. The main objective of CAB-Comm was to dramatically improve the viability of algae as a source of liquid fuels to meet US energy needs, by addressing several significant barriers to economic viability. To achieve this goal, CAB-Comm took a diverse set of approaches on three key aspects of the algal biofuels value chain: crop protection; nutrient utilization and recycling; and the development of genetic tools. These projects have been undertaken as collaboration between six academic institutions and two industrial partners: University of California, San Diego; Scripps Institution of Oceanography; University of Nebraska, Lincoln; Rutgers University; University of California, Davis; Johns Hopkins University; Sapphire Energy; and Life Technologies.

09 BIOMASS FUELS↗

2015 Survey of Non-Starch Ethanol and Renewable Hydrocarbon Biofuels Producers

In order to understand the anticipated status of the industry for non-starch ethanol and renewable hydrocarbon biofuels as of the end of calendar year 2015, the National Renewable Energy Laboratory (NREL) conducted its first annual survey update of U.S. non-starch ethanol and renewable hydrocarbon biofuels producers. This report presents the results of this survey, describes the survey methodology, and documents important changes since the 2013 survey.

09 BIOMASS FUELS↗

Renewable Enhanced Feedstocks for Advanced Biofuels and Bioproducts (REFABB)

The basic concept of the REFABB project was that by genetically engineering the biomass crop switchgrass to produce a natural polymer PHB, which is readily broken down by heating (thermolysis) into the chemical building block crotonic acid, sufficient additional economic value would be added for the grower and processor to make it an attractive business at small scale. Processes for using thermolysis to upgrade biomass to densified pellets (char) or bio-oil are well known and require low capital investment similar to a corn ethanol facility. Several smaller thermolysis plants would then supply the densified biomass, which is easier to handle and transport to a centralized biorefinery where it would be used as the feedstock. Crotonic acid is not by itself a large volume commodity chemical, however, the project demonstrated that it can be used as a feedstock to produce a number of large volume chemicals including butanol which itself is a biofuel target. In effect the project would try to address three key technology barriers, feedstock logistics, feedstock supply and cost effective biomass conversion. This project adds to our understanding of the potential for future biomass biorefineries in two main areas. The first addressed in Task A was the importance and potential of developing an advanced value added biomass feedstock crop. In this Task several novel genetic engineering technologies were demonstrated for the first time. One important outcome was the identification of three novel genes which when re-introduced into the switchgrass plants had a remarkable impact on increasing the biomass yield based on dramatically increasing photosynthesis. These genes also turned out to be critical to increasing the levels of PHB in switchgrass by enabling the plants to fix carbon fast enough to support both plant growth and higher levels of the polymer. Challenges in the critical objective of Task B, demonstrating conversion of the PHB in biomass to crotonic acid at over 90% yield, demonstrated the need to consider up-front the limitations of trying to adopt existing equipment to a task for which subsequent basic research studies indicated it was not suitable. New information was developed in the most complex of the chemical conversions studied, advanced catalysis to make acrylic acid, a chemical used widely to make paints, and this was published in a scientific journal. In regard to the technical effectiveness, the crop science aspects were for the most part remarkably effective in addressing the underlying objectives indicating the soundness of the technical approach. With time, it should be possible to fully develop the advanced biomass biorefinery feedstock. Challenges within the thermolysis step to recover crotonic acid meant that by the end of the project we were not able to demonstrate an economic case based on data from scaled up equipment. Solving this will take further research and development work. As a general statement, the broadest public good is in demonstrating the value of funding a very unique approach to the complex problem of enabling large-scale biomass biorefineries which resulted in significant progress towards the ultimate goal and a clearer understanding of the technical hurdles remaining. Perhaps not surprisingly, some of the broader benefits to the public come from the use of the REFABB project innovations in areas unrelated to the initial objective. It is worth highlighting the breakthrough developments in identifying three single global regulator genes which can be engineered into plants to dramatically increase photosynthesis and carbon capturing ability. These genes have tremendous potential for use in major food crops, in particular corn to enhance grain yield and based on recent findings, increase the root density, a critical key to increasing carbon sequestration in agriculture and improving the sustainability of global food and biofuel production.

09 BIOMASS FUELS↗

2016 Survey of Non-Starch Alcohol and Renewable Hydrocarbon Biofuels Producers

In order to understand the anticipated status of the industry for non-starch ethanol and renewable hydrocarbon biofuels as of the end of calendar year 2015, the National Renewable Energy Laboratory (NREL) updated its annual survey of U.S. non-starch ethanol and renewable hydrocarbon biofuels producers. This report presents the results of this survey update, describes the survey methodology, and documents important changes since the 2015 survey published at the end of 2015 (Schwab et al. 2015).

09 BIOMASS FUELS↗

Washington State University Algae Biofuels Research

The goal of this project was to advance algal technologies for the production of biofuels and biochemicals by establishing the Washington State Algae Alliance, a collaboration partnership among two private companies (Targeted Growth, Inc. (TGI), Inventure Chemicals (Inventure) Inc (now Inventure Renewables Inc) and Washington State University (WSU). This project included three major components. The first one was strain development at TGI by genetically engineering cyanobacteria to yield high levels of lipid and other specialty chemicals. The second component was developing an algal culture system at WSU to produce algal biomass as biofuel feedstock year-round in the northern states of the United States. This system included two cultivation modes, the first one was a phototrophic process and the second a heterotrophic process. The phototrophic process would be used for algae production in open ponds during warm seasons; the heterotrophic process would be used in cold seasons so that year-round production of algal lipid would be possible. In warm seasons the heterotrophic process would also produce algal seeds to be used in the phototrophic culture process. Selected strains of green algae and cyanobacteria developed by TGI were tested in the system. The third component was downstream algal biomass processing by Inventure that included efficiently harvesting the usable fuel fractions from the algae mass and effectively isolating and separating the usable components into specific fractions, and converting isolated fractions into green chemicals.

09 BIOMASS FUELS↗

Metabolism and Evolution of a Biofuel-Producing Microbial Coculture

Specialized features of individual microbial species can be combined in coculture to produce useful fuels and chemicals. Cocultures can also be used to address how microbes cooperate in nature through metabolic interactions but with a level of experimental control that is not possible in natural systems. However, the challenge of maintaining stable microbial relationships and the limited assays available for studying single strains in consortia has impeded progress in characterizing and implementing synthetic communities. In this project, my lab developed a stable and highly reproducible H 2 biofuel-producing coculture between fermentative Escherichia coli and phototrophic Rhodopseudomonas palustris . In this coculture each species provides or 'cross-feeds' a nutrient that the other requires for growth. My lab used this coculture along with mathematical modeling to uncover basic principles governing mutualistic interactions between microbes, including (i) the potential for cross-fed nutrients to alternatively act as toxins depending on the level to which they are produced, (ii) how mutualistic cross-feeding can establish and persist in nutrient-deprived environments where the highest biofuel yields were observed, and (iii) the potential for competition between mutualistic partners for a cross-fed nutrient when that nutrient holds value for both species involved. In using ethanol-producing Zymomonas mobilis in place of E. coli in the coculture, my lab also discovered that Z. mobilis can use N 2 gas as a nitrogen source, with potential cost-savings for the industrial production of cellulosic ethanol.

59 BASIC BIOLOGICAL SCIENCES↗

2017 Algae Harmonization Study: Evaluating the Potential for Future Algal Biofuel Costs, Sustainability, and Resource Assessment from Harmonized Modeling

To present a more unified picture of the long-term future potential for algal biofuels and the goals that must be met to reach that potential, four algae modeling groups collaborated to harmonize respective models for resource assessment (Pacific Northwest National Laboratory), techno-economic analysis (National Renewable Energy Laboratory and Pacific Northwest National Laboratory), and life-cycle analysis (Argonne National Laboratory) of algal biomass production and conversion processes. In contrast to prior harmonization studies that this group has previously conducted, which focused on establishing benchmarks attributed to current performance at the time, the primary intent of the present harmonization study was to project these models to forward-looking targets that must be achieved to reduce fuel costs and greenhouse gas emission profiles to Bioenergy Technologies Office target levels, subject to specific location constraints imposed by resource assessment modeling and thus national-scale fuel output potential (i.e., billion gallons gasoline equivalent per year, or BGGE/yr). In all, while based on a number of aspirational goals not yet demonstrated but plausible to achieve over coming years, the harmonized outputs indicate promising potential for algal biofuels to make a significant contribution to the U.S. fuels market, based on substantial quantities of biomass (104-235 MM tons/yr) projected to be available at costs below 700/ton (generally below 500/ton for freshwater cultivation). While these costs are still significantly higher than terrestrial biomass cost targets, the propensity for capturing high fuel yields and/or high-value tailored coproducts from algal biomass is shown here to provide plausible paths to achieve future targets for cost and sustainability metrics at meaningful volumes.

09 BIOMASS FUELS↗

Enhancing metabolic flux to photosynthetic biofuels

The overall objective of this project was to test new metabolic engineering and systems biology approaches for maximizing metabolic flux to biofuels in cyanobacterial hosts. Our central hypothesis was that combining directed metabolic engineering approaches with global rewiring of circadian transcriptional programs would lead to enhanced biofuel productivities. As proof of principle, we applied our novel toolset to optimize cyanobacterial production of isobutyraldehyde (IBA), which is a direct precursor of isobutanol, starting from a parental IBA-producing strain of Synechococcus elongatus PCC 7942.

59 BASIC BIOLOGICAL SCIENCES↗

Carbon Cycling, Environmental & Rural Economic Impacts of Collecting & Processing Specific Woody Feedstocks in Biofuels

Woody biomass will be an essential feedstock for a large-scale cellulosic biofuel industry. The life cycle carbon accounting for the production of biofuels from woody feedstocks is complex and has engendered significant controversy. Issues such as below ground carbon, carbon debt, varied regional forest practices, multiple parallel forest product lines, and development of realistic counterfactual scenarios all contribute to the complexity. DOE funded CORRIM to develop comprehensive and definitive lifecycle inventories and assessments on the production of fuels from woody feedstocks. CORRIM brought together expertise in forest practices, short rotation woody crops, bioconversion of woody biomass, process modeling, and life cycle assessment to successfully accomplish this goal. The CORRIM team has developed data on forest productivity, fuel usage, and fuel production for six regionally specific forest systems. These six forest systems include three current commercial systems; southern pine plantations, Douglas-fir plantations, naturally regenerated Northeastern (NE) spruce/fir, and three ‘short rotation woody crops’, poplar, eucalyptus and willow, which are at different stages of demonstration in the US. The fuel production systems include cellulosic ethanol and bio-oil based hydrocarbons. The project was successfully reviewed at the BETO Program review in March 2015, 2017, and 2019 and has resulted currently in 19 publications and reports and 35 presentations at both national and international conferences, with more in the pipeline. See publications and presentations for links to each document. Finally, and most importantly, CORRIM has gone beyond the scope of the original DOE proposal to work closely with GREET at Argonne National Laboratory (ANL) to incorporate all the life cycle data and scenario models into their modeling system. GREET is the most widely used and definitive information source for evaluating lifecycle carbon emissions for fuels. The incorporation of CORRIM data from this project guarantees the results of the research will be extensively used and widely disseminated. Technical process improvements and policy relevant accomplishments are detailed in the relevant programmatic sections in the full report including citations therein. Highlights are summarized here for easy reference.

09 BIOMASS FUELS↗

Integrated Strategies to Enable Lower-Cost Biofuels

This report summarizes the findings of a qualitative analysis to identify integrated strategies needed for more affordable biofuels. It outlines five key strategies needed to achieve lower fuel production costs in an integrated biorefinery and provides high-level research needs across the biofuel supply chain.

09 BIOMASS FUELS↗

Carbon Calculator for Land Use and Land Management Change from Biofuels Production (CCLUB)

The Carbon Calculator for Land Use and Land Management Change from Biofuels Production (CCLUB) has been developed as an integral part of Argonne National Laboratory’s Greenhouse Gases, Regulated Emissions, and Energy use in Technologies (GREET) model to analyze greenhouse gas (GHG) emissions from land use change (LUC) and land management change (LMC) in the context of overall biofuel life-cycle analysis (LCA).

09 BIOMASS FUELS↗

Zero-Carbon Biofuels: An Optimized Two-Stage System for High Productivity Conversion of CO2 to Liquid Fuels

In MIT’s Zero-Carbon Biofuels work, under ARPAe’s EcoSynBio funding, we capitalized on our previously developed technology of the oleaginous yeast, Yarrowia lipolytica, engineered to produce high titer biodiesel-like lipids and alkanes, and set out to reduce or eliminate CO 2 generation during lipid production. We set out to do this by both engineering Y. lipolytica with the necessary enzymes to allow the generation of reducing equivalents from H 2 , formic acid, or methanol, and, in parallel, installing the non-oxidative glycolysis (NOG) pathway. The goal was that combination of these two would enable stoichiometric conversion of glucose and acetate to biodiesel products. Furthermore, our ARPAe Electrofuels funded research, yielded a very innovative two-stage system where gases comprising CO 2 and H 2 are used for the production of liquid fuels. Acetate is produced from CO 2 and H 2 , via acetogenic fermentation, in the first stage as the intermediary product, then fed to Y. lipolytica in the second stage, for conversion to lipids and alkanes. To increase the commercial competitiveness of the two-stage system, by improvement to the overall productivity, we recently showed that synergistic substrate co-feeding drastically enhances CO 2 fixation rates and set out to explore additional co-substrate pairs, including methanol and formic acid, in order to maximize acetate productivity. Finally, given the attractiveness as a biofuel, we also set out to attempt an important increase in the production of alkanes over lipids in Yarrowia.

10 SYNTHETIC FUELS↗

Preservation of Microalgae, Lignocellulosic Biomass Blends by Ensiling to Enable Consistent Year-Round Feedstock Supply for Thermochemical Conversion to Biofuels

Seasonal variation in microalgae productivity is a significant barrier to economical production of algae biofuels and chemicals. Summer production can be 3–5 times higher than in the winter resulting in uneven feedstock supplies at algae biorefineries. A portion of the summer production must be preserved for conversion in the winter in order to maintain a biorefinery running at capacity. Ensiling, a preservation process that utilizes lactic acid fermentation to limit microbial degradation, has been demonstrated to successfully stabilize algae biomass (20% solids) and algae-lignocellulosic blends (40% algae-60% lignocellulosic biomass, dry basis) for over 6 months, resulting in fuel production cost savings with fewer emissions. Preservation of algae as blends could be beneficial to biorefineries that utilize thermochemical approaches to fuel production as co-processing of algae and lignocellulosic biomass has been observed to enhance biocrude yield and improve oil quality. This study conducts a resource assessment of biomass residues in the southern United States to identify materials available during peak algae productivity and in sufficient quantity to meet the algae storage needs of an algae biofuel industry. Eight feedstocks met the quantity threshold but only three, distillers grains, haylage, and yard waste, were also available in season. Storage experiments utilizing both freshwater and marine strains of microalgae – Scenedesmus acutus, Chlorella vulgaris, Chlorella zofingiensis, Nannochloropsis gaditana, and Porphyridium purpureum – and yard waste were conducted for 30 days. Storage losses were less than 10% in all but one case, and the pH of all but one blend was reduced to less than 4.7, indicating that yard waste is a suitable feedstock for blending with algae prior to storage. To better understand whether the benefits to conversion realized by processing blends might be affected by storage, elemental analysis and bomb calorimetry of pre- and post-storage algae-yard waste blends were conducted to characterize changes occurring during storage. Storing algae biomass as blends with lignocellulosic biomass could be an effective method of mitigating seasonal variability in algae biomass production while retaining the synergistic effect of co-processing algae blends in thermochemical conversion.

09 BIOMASS FUELS↗

Transgenic Plant-Produced Hydrolytic Enzymes and the Potential of Insect Gut-Derived Hydrolases for Biofuels

Various perennial C4 grass species have tremendous potential for use as lignocellulosic biofuel feedstocks. Currently available grasses require costly pre-treatment and exogenous hydrolytic enzyme application to break down complex cell wall polymers into sugars that can then be fermented into ethanol. It has long been hypothesized that engineered feedstock production of cell wall degrading (CWD) enzymes would be an efficient production platform for of exogenous hydrolytic enzymes. Most research has focused on plant overexpression of CWD enzyme-coding genes from free-living bacteria and fungi that naturally break down plant cell walls. Recently, it has been found that insect digestive tracts harbor novel sources of lignocellulolytic biocatalysts that might be exploited for biofuel production. These CWD enzyme genes can be located in the insect genomes or in symbiotic microbes. When CWD genes are transformed into plants, negative pleiotropic effects are possible such as unintended cell wall digestion. The use of codon optimization along with organelle and tissue specific targeting improves CWD enzyme yields. The literature teaches several important lessons on strategic deployment of CWD genes in transgenic plants, which is the focus of this review

enzyme targeting↗

Fueling the Future: The Emergence of Self-Powered Enzymatic Biofuel Cell Biosensors

Self-powered biosensors are innovative devices that can detect and analyze biological or chemical substances without the need for an external power source. These biosensors can convert energy from the surrounding environment or the analyte itself into electrical signals for sensing and data transmission. The self-powered nature of these biosensors offers several advantages, such as portability, autonomy, and reduced waste generation from disposable batteries. They find applications in various fields, including healthcare, environmental monitoring, food safety, and wearable devices. While self-powered biosensors are a promising technology, there are still challenges to address, such as improving energy efficiency, sensitivity, and stability to make them more practical and widely adopted. This review article focuses on exploring the evolving trends in self-powered biosensor design, outlining potential advantages and limitations. With a focal point on enzymatic biofuel cell power generation, this article describes various sensing mechanisms that employ the analyte as substrate or fuel for the biocatalyst’s ability to generate current. Technical aspects of biofuel cells are also examined. Research and development in the field of self-powered biosensors is ongoing, and this review describes promising areas for further exploration within the field, identifying underexplored areas that could benefit from further investigation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗