Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BEAM-PLASMA SYSTEMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Electron and proton acceleration in superstrong laser field: Simulations and models

Results of particle-in-cell simulations of the interaction of an intense femtosecond laser pulse with a thin aluminum foil the front surface of which is covered with a hydrogen preplasma layer are compared with predictions of simple analytical models. It is shown that light pressure may be the most efficient mechanism for proton acceleration in the initial stage of laser-plasma interaction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion flux onto a nonconducting surface in a beam-plasma discharge: Simulation and experiment

Computer simulations of a plasma sheath formed near a nonconducting surface in a beamplasma discharge (BPD) at a low magnetic field in the reactor chamber are performed. The results of computer simulations are compared with experimental data. The optimal mode of GaAs etching in a BPD-based plasma processing reactor is chosen using results of computer simulations. Simulations for carbon (DLC) film sputtering modes in the framework of a similar model are also performed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion flux onto conducting and isolated surfaces in the beam-plasma discharge: Computer simulation

A physical model which allows the use of the program code KARAT for simulating the quasisteady state of the beam-plasma discharge with plasma regeneration from a neutral gas is developed. The results of simulation of the modes of discharge at different potentials at the discharge collector are reported. The results obtained for isolated and grounded ion collectors are compared.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multiharmonic cubic-nonlinear theory of plasma-beam superheterodyne free-electron lasers of the dopplertron type

A multiharmonic cubic-nonlinear theory of a plasma-beam superheterodyne free-electron laser of the dopplertron type is constructed. A retarded electromagnetic wave propagating in the magnetized plasma-beam system toward the electron beam is used for pumping. The multiharmonic interaction of waves which plays an important role is taken into account. Saturation levels and mechanisms are analyzed. The promising application of such systems for generating high-power electromagnetic radiation in the millimeter wavelength range is demonstrated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Production of polycrystalline silicon from monosilane in the electron-beam plasma

The results of experimental studies concerned with deposition of solar-grade silicon from monosilane in the electron-beam plasma are reported. With the laboratory equipment, the silicon deposition rate attains up to 40 g h{sup -1} at the expenditure of energy for the process 78 kW h kg{sup -1} and the efficiency of conversion of monosilane into silicon at about 50%. Analysis of the chemical composition of the resulting material shows that the material fits the requirements imposed on solar-grade silicon. The method suggested in the study holds promise in industrial-scale applications.

36 MATERIALS SCIENCE↗

Acceleration of an electron bunch injected in front of a laser pulse generating an accelerating wake wave

A study is made of a promising method for injecting an electron bunch into an accelerating laser-plasma system. A bunch is injected ahead of the front of a laser pulse generating a wake wave that propagates in a direction collinear with the pulse and has a velocity lower than the pulse group velocity. The influence of the initial nonmonoenergetic character of the bunch on its trapping and acceleration is investigated. By appropriately choosing the laser pulse parameters and the bunch injection energy, it is possible to create such conditions for the trapping of an initially nonmonoenergetic bunch by the wake wave that, over a certain acceleration distance, there will be no energy spread of the bunch due to its initial nonmonoenergetic character, a circumstance that allows compact electron bunches to be accelerated to high energies, with a minimum energy spread.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Efficient method of gas laser pumping by an electron beam in the SIGE-1 experimental setup

Lasers, sources of coherent UV and vacuum UV radiation, plasmachemical reactors, reactors for cleaning fouled gases, etc., can be classified as devices the working medium of which is plasma formed as a result of the interaction of a high-current relativistic electronic beam with gas. Efficiency of such devices which are united under the common name 'systems of injection gas electronics' (SIGE) depends mainly on the efficiency of energy transfer from a beam to gas ({eta}g = W{sub g}/W{sub b}) and that of the transform of the energy transferred to gas into the energy of the ultimate product W{sub in} ({eta}{sub in} = W{sub in}/W{sub g}). As a special case of SIGE, an experimental bench laser is considered. The new efficient method of pumping is supposed to be implemented on this laser to optimize the energy contribution {eta}{sub g} and useful output {eta}{sub in}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The use of a high-current electron beam in plasma relativistic microwave oscillators

Relativistic microwave electronics faces the problem of using high currents of relativistic electron beams; i.e., it is possible to use beams the current of which is lower than that of actually existing high-current accelerators. We show the possibility of increasing the power of radiation generated in a plasma relativistic microwave oscillator (PRMO) due to an increase in the absolute value of current. For the beam currents close to the value of limiting vacuum current, the efficiency of microwave generation decreases; therefore, we study PRMO schemes with a high value of limiting vacuum current, i.e., schemes with a small gap between a hollow relativistic electron beam and the waveguide wall. The results of the experiment and numerical simulation are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Control of power characteristics of ion flow in plasma-etching reactor based on beam-plasma discharge

It is shown that on the basis of the earlier revealed effect of generating the ion flow in the beam-plasma discharge from the discharge axis, a plasma processing reactor can be created for low-energy etching of semiconductor structures. The possibility of easily controlling the density and energy of ion flow by means of varying the potential of the discharge collector is demonstrated. The charge compensation of the ion flow incident on the nonconducting surface is implemented using the modulation of the potential of the substrate holder as well as the plasma-potential modulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Peculiarities of the beam-plasma discharge development in high-pressure gas and prospects of its application

The dynamics of a stationary beam-plasma discharge at the neutral gas pressure of 10{sup -3}-1 Torr is investigated. Three discharge modes have been revealed: two of them are characterized by novel properties and have not been studied as of yet. Dissipative instabilities with different increments have been found. The generation of ion flows has been studied and the experiments on 'dry' cleaning of the metal specimen surfaces using them have been carried out. The pressure ranges in a neutral gas at which the discharge can be efficiently applied in nonequilibrium plasma chemistry are given.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Picosecond runaway electron beams in air

Experimental data on the generation of picosecond runaway electron beams in an air gap with an inhomogeneous electric field at a cathode voltage of up to 500 kV are presented. The methods and equipment developed for these experiments made it possible to measure the beam characteristics with a time resolution of better than 10{sup -11} s, determine the voltage range and the beam formation time in the breakdown delay stage, and demonstrate the influence of the state of the cathode surface on the stability of runaway electron generation. It is demonstrated that the critical electron runaway field in air agrees with the classical concepts and that the accelerated beam can be compressed to {approx}20 ps. It is unlikely that, under these conditions, the beam duration is limited due to the transition of field emission from the cathode to a microexplosion of inhomogeneities. The maximum energy acquired by runaway electrons in the course of acceleration does not exceed the value corresponding to the electrode voltage.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental and theoretical studies of the spatial distribution of the ionization rate in a non-self-sustained discharge controlled by a fast electron beam

The spatial distribution of the current density of fast electrons and the ionization rate in a gap filled with atmospheric-pressure air under the conditions of a non-self-sustained discharge controlled by a fast electron beam were investigated. The experiments were carried out in a gas-discharge chamber with a grid electrode arranged in parallel to the exit window of the ionization source. Spatial variations in the current density of fast electrons resulting from the grid were measured. The propagation of the electron beam through the discharge system was simulated numerically by the Monte Carlo method in the so-called 'effective collision' approximation. The calculated results agree well with the experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of the core-corona structure formed during the explosion of an aluminum wire in vacuum

The time evolution of the matter parameters and current distribution in the discharge channel formed during a nanosecond explosion of a 25-{mu}m-diameter 12-mm-long aluminum wire was studied in a series of experiments with the following parameters: the discharge voltage was U{sub 0} = 20 kV, the current amplitude was I{sub max} {approx} 8 kA, and the current rise rate was dI/dt {approx} 40 A/ns. Optical shadow and schlieren images of the discharge channel were obtained using the second harmonic of a YAG: Nd{sup +3} laser, and UV images of the discharge channel self-radiation were recorded using a four-frame camera with a microchannel plate. The process of aluminum wire explosion was simulated numerically (including simulations performed from the 'cold start'). The numerical results were compared with the experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Beam discharge excited by distributed virtual cathode

A new type of beam discharge, i.e., beam discharge with a distributed virtual cathode (VC) is proposed and considered by numerical simulation. The discharge is established during counter motion of high-current electron beams in a gas-filled equipotential cavity and is characterized by a state of hot dense electron plasma of primary electrons. The discharge temporal dynamics is studied. It is shown that the VC lifetime depends linearly from this sum in a wide range of the sum of beam currents, from the boundary current of two-beam instability to the critical current of Pierce instability. Generation of nonlinear electrostatic structures shaped as phase bubbles in the discharge is detected, and their dynamics is studied. The parameters are determined, at which the multiple coexistence of phase bubbles and their coalescence during collisions is observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Acceleration of electron bunches injected into a wake wave

The process of trapping and acceleration of nonmonoenergetic electron bunches by a wake wave excited by a laser pulse in a plasma channel is investigated. The electrons are injected into the vicinity of the maximum of the wakefield potential with a velocity lower than the wave phase velocity. The study is aimed at utilizing specific features of a wakefield with substantially overlapped focusing and accelerating phases for achieving monoenergetic electron acceleration. Conditions are found under which electrons in a finite-length nonmonoenergetic bunch are accelerated to high energies, while the energy spread between them is minimal. The effect of energy grouping of electrons makes it possible to obtain compact high-energy electron bunches with a small energy spread during laser plasma acceleration.

43 PARTICLE ACCELERATORS↗

Three-dimensional simulations of anomalous absorption of laser radiation by plasma with supercritical density

A three-dimensional (3D) model of the interaction of laser radiation with plasma in the framework of Maxwell-Vlasov equations has been used to calculate the anomalous optical absorption in plasma of supercritical density. The results of calculations confirmed the development of anomalous absorption that was previously revealed by 2D models, which were insufficient for comparison to the experiment. Calculations were performed for a system containing about 10{sup 6} macroparticles that allowed the absorption coefficient and other characteristics of anomalous absorption in plasma with an inhomogeneous surface to be determined as functions of various parameters of the incident radiation and plasma target. Results are analyzed and estimations are obtained for the contributions of ionization processes and pair collisions of electrons, which show that these factors were quite reasonably ignored in the model. All quantitative results are obtained for the third harmonic of neodymium laser ({lambda} = 0.351 {mu}m) at a tenfold excess of the substance density over a critical value for this radiation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Energy characteristics of beam-plasma interaction in a closed volume

Energy exchange between an electron beam and plasma during a beam-plasma discharge in a closed cavity excited by the electron beam is analyzed using computer simulations by the KARAT code. A method allowing one to analyze the beam-plasma interaction in the quasi-steady stage of the discharge is proposed. Qualitative characteristics of energy exchange (such as beam energy losses and the energy distributions of beam electrons and plasma particles leaving the discharge) both during spontaneous discharge excitation and in the presence of initial beam modulation by regular or noiselike signals are determined. The results obtained enable one to estimate the energy characteristics of a plasma processing reactor based on a beam-plasma discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗