SEARCH · Engineering Papers

Results for “Accounting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

All sources NASA NTRS DOE OSTI

NASA NTRS1974

An investigation of the facsimile camera response to object motion

A general analytical model of the facsimile camera response to object motion is derived as an initial step toward characterizing the resulting image degradation. This model expresses the spatial convolution of a time-varying object radiance distribution and camera point-spread function for each picture element in the image. Time variations and these two functions during each convolution account for blurring of small image detail, and variations between, as well as during, successive convolutions account for geometric image distortions. If the object moves beyond the angular extent of several picture elements while it is being imaged, then geometric distortion tends to dominate blurring as the primary cause of image degradation. The extent of distortion depends not only on object size and velocity but also on the direction of object motion, and is therefore difficult to classify in a general sense.

Huck, F. O.↗

NASA NTRS1973

Compensation of vibrations of a unidimensional structure and a plane acoustical field

Endless structures are realized in practice, in the presence of loss and to an adequate extent, owing to which, reflections from the edges to the center part of the structure can be disregarded. In the absence of losses, reflections from the boundary frequently have to be taken into account. In this case, besides compensation for waves passing through the boundary, the reciprocal connection system can be used for compensation of the total field ahead of the boundary. In these cases, the system converters can be located in a different manner relative to the boundary and to one another. Each of the locations has inherent peculiarities, which must be taken into account in solving specific problems.

Tartakovskiy, B. D.↗

NASA NTRS1973

Studies of irregularities in motion of vibroshock type mechanisms

Reciprocating motion mechanisms, in which a mass with large gaps can be driven with almost uniform speed, are investigated. A single-mass system with dry friction, the motion of which is restricted by two stops, is examined. The system is put into motion by kinematic disturbances through a flexible link. Periodic modes of movement, under conditions in which the disturbance arises from two impacts on the mass (from the right and left stops) are examined. Primary attention was given to irregularities in the course of the mass. The shock interaction of the mass with the stop was accounted for by the shock speed restoration coefficient R. The shock-frequency characteristics of the free shock vibrations were determined. Expressions were obtained which define the transitional process. The phase and velocity of several succeeding shocks were determined. After taking account of the conditions of the steady mode of movement, velocities and phases in the steady mode of movement were obtained.

Mateyshka, S. Y.↗

NASA NTRS1974

Application of a substructuring technique to the problem of crack extension and closure

A substructuring technique, originally developed for the efficient reanalysis of structures, is incorporated into the methodology associated with the plastic analysis of structures. An existing finite-element computer program that accounts for elastic-plastic material behavior under cyclic loading was modified to account for changing kinematic constraint conditions - crack growth and intermittent contact of crack surfaces in two dimensional regions. Application of the analysis is presented for a problem of a centercrack panel to demonstrate the efficiency and accuracy of the technique.

Armen, H., Jr.↗

NASA NTRS1974

A finite element analysis of fatigue crack closure

Experiments have shown that fatigue cracks close at positive loads during constant-amplitude load cycling. The crack-closure phenomenon is caused by residual plastic deformations remaining in the wake of an advancing crack tip. The present paper is concerned with the application of a two-dimensional, nonlinear, finite-element analysis for predicting crack-closure and crack-opening stresses during cyclic loading. A two-dimensional finite-element computer program, which accounts for both elastic-plastic material behavior and changing boundary conditions associated with crack extension and intermittent contact of the crack surfaces under cyclic loading, has been developed. An efficient technique to account for changing boundary conditions was also incorporated into the nonlinear analysis program. This program was subsequently used to study crack extension and crack closure under constant-amplitude and two-level block loading. The calculated crack-closure and crack-opening stresses were qualitatively consistent with experimental observations.

Newman, J. C., Jr.↗

NASA NTRS1974

Calculation of unsteady transonic aerodynamics for oscillating wings with thickness (computer program)

A computer program has been developed to account approximately for the effects of finite wing thickness in the transonic potential flow over an oscillating wing of finite span. The program is based on the original sonic-box program of Rodemich and Andrew, and accounts for the nonuniform flow caused by finite thickness by application of the local linearization concept. A brief description of each subroutine is given, and the method of input is shown in detail. A sample problem as well as a complete listing of the computer program are presented.

Ruo, S. Y.↗

NASA NTRS1974

Lateral conduction effects on heat-transfer data obtained with the phase-change paint technique

A computerized tool, CAPE, (Conduction Analysis Program using Eigenvalues) has been developed to account for lateral heat conduction in wind tunnel models in the data reduction of the phase-change paint technique. The tool also accounts for the effects of finite thickness (thin wings) and surface curvature. A special reduction procedure using just one time of melt is also possible on leading edges. A novel iterative numerical scheme was used, with discretized spatial coordinates but analytic integration in time, to solve the inverse conduction problem involved in the data reduction. A yes-no chart is provided which tells the test engineer when various corrections are large enough so that CAPE should be used. The accuracy of the phase-change paint technique in the presence of finite thickness and lateral conduction is also investigated.

Maise, G.↗

NASA NTRS1974

Mars - Clearing of the 1971 dust storm

A semiquantitative analysis of clearing in the 1971 great dust storm on Mars is presented as a function of time and altitude, using Mariner 9 orange- and visual-light photos. Steady settling of dust approximately accounts for the decline of the storm after Dec. 22, 1971. Continuous settling cannot be invoked prior to that date; injection of dust into the atmosphere, i.e., a storm resurgence, occurred in mid-December 1971. Theoretical models of optical depth vs time are developed for various distributions of particles in the atmosphere. By interpreting settling in terms of Stokes' law, estimates of the maximum radii of dust particles throughout the atmosphere have been obtained. Models which best account for the dust-storm decline indicate particles less than 5 microns in diameter high in the atmosphere, with a concentration of larger particles near the ground in the lowest parts of Mars.

Hartmann, W. K.↗

NASA NTRS1974

Shapes of strong shock fronts in an inhomogeneous solar wind

The shapes expected for solar-flare-produced strong shock fronts in the solar wind have been calculated, large-scale variations in the ambient medium being taken into account. It has been shown that for reasonable ambient solar wind conditions the mean and the standard deviation of the east-west shock normal angle are in agreement with experimental observations including shocks of all strengths. The results further suggest that near a high-speed stream it is difficult to distinguish between corotating shocks and flare-associated shocks on the basis of the shock normal alone. Although the calculated shapes are outside the range of validity of the linear approximation, these results indicate that the variations in the ambient solar wind may account for large deviations of shock normals from the radial direction.

Heinemann, M. A.↗

NASA NTRS1974

Elastic-plastic analysis of a propagating crack under cyclic loading

Development and application of a two-dimensional finite-element analysis to predict crack-closure and crack-opening stresses during specified histories of cyclic loading. An existing finite-element computer program which accounts for elastic-plastic material behavior under cyclic loading was modified to account for changing boundary conditions - crack growth and intermittent contact of crack surfaces. This program was subsequently used to study the crack-closure behavior under constant-amplitude and simple block-program loading.

Newman, J. C., Jr.↗

NASA NTRS1974

Orbital elements and absolute dimensions of the eclipsing system LY Aurigae

Orbital solutions were obtained for the early-type eclipsing binary LY Aurigae from the light curves obtained with the OAO-2 by Heap and from the V light curve obtained from ground-based observations by Mayer and Horak. The solutions take into account the existence of a nearby companion not accounted for by previous investigators. The spectroscopic observations by Mayer and Batten were used to compute absolute dimensions for the binary orbit and for each component. This binary system presents an unique opportunity to determine accurately the absolute dimensions of an O9.5 III star.

Mccluskey, G. E., Jr.↗

NASA NTRS1974

A dust-shell model of the infrared object HD 45677

A dust-shell model of the infrared star HD-45677 was constructed by means of a generalization of the mathematical techniques of Huang. The model shows that an isotropically scattering, uniform-density spherical circumstellar dust shell is able to account for the observed emergent energy distribution. The extinction properties of the grains required depend on the energy distribution incident on the inner boundary of the shell such that gray grains are needed if the stellar temperature is about 13,000 K and a reciprocal wavelength extinction law is indicated for a star of 20,000 K. This model for HD 45677 is compared with that of Dyck and Milkey, who propose free-free emission from a circumstellar gas shell to account for the observed infrared excess.

Apruzese, J. P.↗

NASA NTRS1974

The broadening of He I lines including ion dynamic corrections, with application to 4471 A

A theory of the broadening of He I lines with forbidden components is developed. The theory takes into account the effects of dynamic ion broadening and is valid at low densities where the forbidden line is reasonably well isolated. Good agreement with experiment and with calculations by Lee (1972) was obtained when the theory was applied at a wavelength of 4471 A. Tables of these data are given and are extended into the line wings beyond the extent of previous tabulations. Reasons for agreement with Lee data are discussed in detail. The density level above which the static ion theory is adequate is defined. A simple numerical profile of allowed lines is also obtained, taking into account dynamic ion effects.

Barnard, A. J.↗

NASA NTRS1974

Lifting surface theory of axial compressor blade rows. I - Subsonic compressor. II - Transonic compressor

A linearized three-dimensional lifting surface theory is considered, taking into account relations to axisymmetric 'through-flow' or actuator disk theories, general results for flow within the blade row, relations to two-dimensional cascade theory, and finite blade and wake effects. Numerical results are presented, giving attention to the problem of wakeless flow and of wake flow. Expressions for wake functions are given in an appendix. The lifting line velocity potential employed by Namba (1972) is used as a starting point in the discussion of the lifting surface theory. A study of subsonic conditions is supplemented by an investigation of a transonic compresso, taking into account the general three-dimensional solution, induced velocities, and the acoustic pressure field.

Okurounmu, O.↗

NASA NTRS1975

On a possible method for daily adjustment of severe storm radar criteria

A method is proposed of adjusting the radar criteria for severe storms, taking into account the height of the minus 22 C isotherm, the minimum value of the maximum magnitude of the radar reflectivity in thunderstorms at the same level for a specific region, and the various types of homogeneous air masses in the air. Formulas for the criteria are presented which take into account specified errors of discrimination.

Brylev, G. B.↗

NASA NTRS1975

Calculation of unsteady transonic aerodynamics for oscillating wings with thickness

An analytical approach is presented to account for some of the nonlinear characteristics of the transonic flow equation for finite thickness wings undergoing harmonic oscillation at sonic flight speed in an inviscid, shock-free fluid. The thickness effect is accounted for in the analysis through use of the steady local Mach number distribution over the wing at its mean position by employing the local linearization concept and a coordinate transformation. Computed results are compared with that of the linearized theory and experiments. Based on the local linearization concept, an alternate formulation avoiding the limitations of the coordinate transformation method is presented.

Ruo, S. Y.↗

NASA NTRS1975

Consolidation of fatigue and fatigue-crack-propagation data for design use

Analytical methods developed for consolidation of fatigue and fatigue-crack-propagation data for use in design of metallic aerospace structural components are evaluated. A comprehensive file of data on 2024 and 7075 aluminums, Ti-6Al-4V alloy, and 300M steel was established by obtaining information from both published literature and reports furnished by aerospace companies. Analyses are restricted to information obtained from constant-amplitude load or strain cycling of specimens in air at room temperature. Both fatigue and fatigue-crack-propagation data are analyzed on a statistical basis using a least-squares regression approach. For fatigue, an equivalent strain parameter is used to account for mean stress or stress ratio effects and is treated as the independent variable; cyclic fatigue life is considered to be the dependent variable. An effective stress-intensity factor is used to account for the effect of load ratio on fatigue-crack-propagation and treated as the independent variable. In this latter case, crack-growth rate is considered to be the dependent variable. A two term power function is used to relate equivalent strain to fatigue life, and an arc-hyperbolic-tangent function is used to relate effective stress intensity to crack-growth rate.

Rice, R. C.↗

NASA NTRS1975

Ring current proton decay by charge exchange

Explorer 45 measurements during the recovery phase of a moderate magnetic storm have confirmed that the charge exchange decay mechanism can account for the decay of the storm-time proton ring current. Data from the moderate magnetic storm of 24 February 1972 was selected for study since a symmetrical ring current had developed and effects due to asymmetric ring current losses could be eliminated. It was found that after the initial rapid decay of the proton flux, the equatorially mirroring protons in the energy range 5 to 30 keV decayed throughout the L-value range of 3.5 to 5.0 at the charge exchange decay rate calculated by Liemohn. After several days of decay, the proton fluxes reached a lower limit where an apparent equilibrium was maintained, between weak particle source mechanisms and the loss mechanisms, until fresh protons were injected into the ring current region during substorms. While other proton loss mechanisms may also be operating, the results indicate that charge exchange can entirely account for the storm-time proton ring current decay, and that this mechanism must be considered in all studies involving the loss of proton ring current particles.

Smith, P. H.↗