Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Accelerators, Computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Performance study of GPUs in real-time trigger applications for HEP experiments

Graphical Processing Units (GPUs) have evolved into highly parallel, multi-threaded, multicore powerful processors with high memory bandwidth. GPUs are used in a variety of intensive computing applications. The combination of highly parallel architecture and high memory bandwidth makes GPUs a potentially promising technology for effective real-time processing for High Energy Physics (HEP) experiments. However, not much is known of their performance in real-time applications that require low latency, such as the trigger for HEP experiments. We describe an R and D project with the goal to study the performance of GPU technology for possible low latency applications, performing basic operations as well as some more advanced HEP lower-level trigger algorithms (such as fast tracking or jet finding). We present some preliminary results on timing measurements, comparing the performance of a CPU versus a GPU with NVIDIA's CUDA general-purpose parallel computing architecture, carried out at CDF's Level-2 trigger test stand. These studies will provide performance benchmarks for future studies to investigate the potential and limitations of GPUs for real-time applications in HEP experiments.

43 PARTICLE ACCELERATORS↗

Measuring the 2{gamma} Exchange Effect in Electron-Proton Scattering at CLAS

Recent results from experiments at Jefferson Laboratory, Newport News VA, which measure the ratio of the electric to magnetic form factors of the proton, G{sub E}/G{sub M}, have forced us to reexamine the single photon exchange approximation in lepton-proton elastic scattering. Discrepancies between the ratio obtained via the time-tested Rosenbluth separation method and new polarization transfer measurements, which differ by as much as a factor of three, may be resolved by considering the effect of two photon exchange (TPE). Theoretical corrections for the TPE effect are difficult due to the large number of excited nucleon states that can contribute to the process. The TPE effect can, however, be determined directly by measuring the ratio of the positron-proton to electron-proton elastic scattering cross sections, R = {sigma}(e{sup +})/{sigma}(e{sup -}), since the TPE effect changes sign with the charge of the incident particle. The CLAS TPE experiment at Jefferson Laboratory, will determine the effect of two-photon exchange in elastic lepton-proton scattering by precisely measuring the ratio of positron-proton to electron-proton elastic cross sections over a large kinematic range (0.1<{epsilon}<0.96, 0.02{<=}Q{sup 2}{<=}2.0). We will accomplish this by directing the 5.5 GeV primary electron beam, provided by the Continuous Electron Beam Accelerator Facility (CEBAF), onto a set of radiators and converters to produce simultaneous and identical beams of electron and positrons. Acceptance and efficiency concerns are minimized by only considering the ratios of the elastic cross sections and switching polarity of magnets in the beam line and the spectrometer. Guided by the results of a short 2006 test run and extensive GEANT based modeling, new shielding and beam line components were designed to maximize luminosity. The unique experimental design and challenges of the TPE experiment and the projected luminosities will be presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Deep Learning Based Workflow for Accelerated Industrial X-Ray Computed Tomography

X-ray computed tomography (XCT) is an important tool for high-resolution non-destructive characterization of additively-manufactured metal components. XCT reconstructions of metal components may have beam hardening artifacts such as cupping and streaking which makes reliable detection of flaws and defects challenging. Furthermore, traditional workflows based on using analytic reconstruction algorithms require a large number of projections for accurate characterization - leading to longer measurement times and hindering the adoption of XCT for in-line inspections. In this paper, we introduce a new workflow based on the use of two neural networks to obtain high-quality accelerated reconstructions from sparse-view XCT scans of single material metal parts. The first network, implemented using fully-connected layers, helps reduce the impact of BH in the projection data without the need of any calibration or knowledge of the component material. The second network, a convolutional neural network, maps a low-quality analytic 3D reconstruction to a high-quality reconstruction. Using experimental data, we demonstrate that our method robustly generalizes across several alloys, and for a range of sparsity levels without any need for retraining the networks thereby enabling accurate and fast industrial XCT inspections.

Rahman, Obaid↗

Design of a Commercial Scale Accelerator Driven Subcritical Aqueous Assembly

SHINE Medical Technologies is working towards producing a reliable, domestic supply of medical isotopes, including molybdenum-99 (Mo-99), xenon-133, and iodine 131, without using highly enriched uranium. Approximately 88% of Mo-99 decays to technetium-99m, which is the most widely used medical isotope in the world, accounting for approximately 80% of all nuclear medicine procedures. A novel aqueous, subcritical nuclear assembly has been designed by SHINE Medical Technologies. The assembly can produce medical radioisotopes in significant quantities for U.S. and foreign needs. The assembly produces isotopes without using a reactor, instead using a fusion-based neutron source coupled to a fission-based aqueous assembly. The subcritical nature of the aqueous assembly has safety and licensing benefits, including the elimination of the reactor control system and elimination of high level waste. SHINE plans to construct eight subcritical assemblies with a plant capacity of greater than 3000 6-day Curies, which is more than one-quarter of the world's Mo-99 requirements. From a nuclear design standpoint, the aqueous subcritical assembly needs to be able to generate sufficient fission power to meet the production capacity requirements while remaining subcritical at all times with an acceptable margin. To address these conflicting design goals, a simple nuclear design and reactivity control philosophy has been developed that allows for high power operation with a high degree of safety. A fusion-driven subcritical fission assembly has been designed by SHINE Medical Technologies to provide a reliable, domestic supply of medical isotopes. Nuclear models have been created and show that the assembly can be started up, operated, and shutdown in a safe manner without active reactivity control systems. A unique reactivity control strategy allows SHINE to operate the aqueous subcritical assembly at much higher power levels than would otherwise be practical, while still retaining the benefits of subcritical operation and avoiding the need for complex subcritical measurement techniques. Based on the current design, the subcritical target is capable of generating significant fission power (on the order of 100 kW) when being driven by a simple, low-cost deuterium-tritium accelerator, enabling the SHINE facility to supply over one-fourth of the worldwide demand of Mo- 99. SHINE has recently been issued a construction permit by the U.S. Nuclear Regulatory Commission to build the commercial facility in Janesville, WI, with eight subcritical assemblies and the associated production equipment. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Accelerated Sparse Recovery via Gradient Descent with Nonlinear Conjugate Gradient Momentum

This paper applies an idea of adaptive momentum for the nonlinear conjugate gradient to accelerate optimization problems in sparse recovery. Specifically, we consider two types of minimization problems: a (single) differentiable function and the sum of a non-smooth function and a differentiable function. In the first case, we adopt a fixed step size to avoid the traditional line search and establish the convergence analysis of the proposed algorithm for a quadratic problem. This acceleration is further incorporated with an operator splitting technique to deal with the non-smooth function in the second case. As a result, we use the convex ι 1 and the nonconvex ι 1 – ι 2 functionals as two case studies to demonstrate the efficiency of the proposed approaches over traditional methods.

97 MATHEMATICS AND COMPUTING↗

A diffusion synthetic acceleration scheme for rectangular geometries based on bilinear discontinuous finite elements

A DSA technique to accelerate the iterative convergence of S{sub n} transport solves is derived for bilinear discontinuous (BLD) finite elements on rectangular grids. The diffusion synthetic acceleration equations are discretized using BLD elements by adapting the Modified Interior Penalty technique, introduced in [4] for triangular grids. The MIP-DSA equations are SPD and thus are solved using a preconditioned CG technique. Fourier analyses and implementation of the technique in a BLD S{sub n} transport code show that the technique is stable is effective. (authors)

97 MATHEMATICS AND COMPUTING↗

P4: Portable Parallel Processing Pipelines for Interactive Information Visualization

We present P4, an information visualization toolkit that combines declarative design specification and GPU computing for building high-performance interactive systems. Most of the existing information visualization toolkits do not harness the power of parallel processors in today's mainstream computers. P4 leverages GPU computing to accelerate both data processing and visualization rendering for interactive visualization applications. P4's programming interface offers a declarative visualization grammar for rapid specifications of data transformations, visual encodings, and interactions. By simplifying the development of GPU-accelerated visualization systems while supporting a high degree of flexibility and customization for design specification, P4 narrows the gap between expressiveness and scalability in information visualization toolkits. Through a range of examples and benchmark tests, we demonstrate that P4 provides high efficiency for creating interactive visualizations and offers drastic performance improvement over current state-of-the-art toolkits.

97 MATHEMATICS AND COMPUTING↗

A new indirect measure of diffusion model error

We define a new indirect measure of the diffusion model error called the diffusion model error source. When this model error source is added to the diffusion equation, the transport solution for the angular-integrated intensity is obtained. This source represents a means by which a transport code can be used to generate information relating to the adequacy of diffusion theory for any given problem without actually solving the diffusion equation. The generation of this source does not relate in any way to acceleration of the iterative convergence of transport solutions. Perhaps the most well-known indirect measure of the diffusion model error is the variable-Eddington tensor. This tensor provides a great deal of information about the angular dependence of the angular intensity solution, but it is not always simple to interpret. In contrast, our diffusion model error source is a scalar that is conceptually easy to understand. In addition to defining the diffusion model error source analytically, we show how to generate this source numerically relative to the S{sub n} radiative transfer equations with linear-discontinuous spatial discretization. This numerical source is computationally tested and shown to reproduce the Sn solution for a Marshak-wave problem. (authors)

97 MATHEMATICS AND COMPUTING↗

NEAMS Experimental Support for Code Validation, INL FY2009

The goal is for all modeling and simulation tools to be demonstrated accurate and reliable through a formal Verification and Validation (V&V) process, especially where such tools are to be used to establish safety margins and support regulatory compliance, or to design a system in a manner that reduces the role of expensive mockups and prototypes. Whereas the Verification part of the process does not rely on experiment, the Validation part, on the contrary, necessitates as many relevant and precise experimental data as possible to make sure the models reproduce reality as closely as possible. Hence, this report presents a limited selection of experimental data that could be used to validate the codes devoted mainly to Fast Neutron Reactor calculations in the US. Emphasis has been put on existing data for thermal-hydraulics, fuel and reactor physics. The principles of a new “smart” experiment that could be used to improve our knowledge of neutron cross-sections are presented as well. In short, it consists in irradiating a few milligrams of actinides and analyzing the results with Accelerator Mass Spectroscopy to infer the neutron cross-sections. Finally, the wealth of experimental data relevant to Fast Neutron Reactors in the US should not be taken for granted and efforts should be put on saving these 30-40 years old data and on making sure they are validation-worthy, i.e. that the experimental conditions and uncertainties are well documented.

97 MATHEMATICS AND COMPUTING↗

Coupling Visualization and Data Analysis for Knowledge Discovery from Multi-dimensional Scientific Data

Knowledge discovery from large and complex scientific data is a challenging task. With the ability to measure and simulate more processes at increasingly finer spatial and temporal scales, the growing number of data dimensions and data objects presents tremendous challenges for effective data analysis and data exploration methods and tools. The combination and close integration of methods from scientific visualization, information visualization, automated data analysis, and other enabling technologies"such as efficient data management" supports knowledge discovery from multi-dimensional scientific data. This paper surveys two distinct applications in developmental biology and accelerator physics, illustrating the effectiveness of the described approach.

97 MATHEMATICS AND COMPUTING↗

Bayesian Analysis of Step-Stress Accelerated Life Test with Exponential Distribution

In this article, we propose a general Bayesian inference approach to the step-stress accelerated life test with type II censoring. We assume that the failure times at each stress level are exponentially distributed and the test units are tested in an increasing order of stress levels. We formulate the prior distribution of the parameters of life-stress function and integrate the engineering knowledge of product failure rate and acceleration factor into the prior. The posterior distribution and the point estimates for the parameters of interest are provided. Through the Markov chain Monte Carlo technique, we demonstrate a nonconjugate prior case using an industrial example. It is shown that with the Bayesian approach, the statistical precision of parameter estimation is improved and, consequently, the required number of failures could be reduced.

14 SOLAR ENERGY↗

Further developments in generating type-safe messaging

At ICALEPCS 09, we introduced a source code generator that allows processes to communicate safely using data types native to each host language. In this paper, we discuss further development that has occurred since the conference in Kobe, Japan, including the addition of three more client languages, an optimization in network packet size and the addition of a new protocol data type. The protocol compiler is continuing to prove itself as an easy and robust way to get applications written in different languages hosted on different computer architectures to communicate. We have two active Erlang projects that are using the protocol compiler to access ACNET data at high data rates. We also used the protocol compiler output to deliver ACNET data to an iPhone/iPad application. Since it takes an average of two weeks to support a new language, we're willing to expand the protocol compiler to support new languages that our community uses.

43 PARTICLE ACCELERATORS↗

Seismic Response Analysis and Design of Structure with Base Isolation

The paper reports the study on seismic response and energy distribution of a multi-story civil structure. The nonlinear analysis used the 2003 Bam earthquake acceleration record as the excitation input to the structural model. The displacement response was analyzed in time domain and in frequency domain. The displacement and its derivatives result energy components. The energy distribution in each story provides useful information for the structural upgrade with help of added devices. The objective is the structural displacement response minimization. The application of the structural seismic response research is presented in base-isolation example.

97 MATHEMATICS AND COMPUTING↗

Force Reconstruction Using the Inverse of the Mode-Shape Matrix [Book Chapter]

A new technique for force reconstruction is developed. To estimate the externally applied force, this technique sums the weight-scaled acceleration signals, and is referred to as the Sum of Weighted Accelerations Technique (SWAT). To obtain the scalar weights the inverse of the mode shape matrix is used. Application of this technique is illustrated with both numerical calculations using a mass-spring model and experimental data from a structure impacting a rigid barrier.

055001 -- Nuclear Fuels-- Safeguards, Inspection, ↗

Time Acceleration Methods for Advection on the Cubed Sphere

Climate simulation will not grow to the ultrascale without new algorithms to overcome the scalability barriers blocking existing implementations. Until recently, climate simulations concentrated on the question of whether the climate is changing. The emphasis is now shifting to impact assessments, mitigation and adaptation strategies, and regional details. Such studies will require significant increases in spatial resolution and model complexity while maintaining adequate throughput. The barrier to progress is the resulting decrease in time step without increasing single-thread performance. In this paper we demonstrate how to overcome this time barrier for the first standard test defined for the shallow-water equations on a sphere. This paper explains how combining a multiwavelet discontinuous Galerkin method with exact linear part time-evolution schemes can overcome the time barrier for advection equations on a sphere. The discontinuous Galerkin method is a high-order method that is conservative, flexible, and scalable. The addition of multiwavelets to discontinuous Galerkin provides a hierarchical scale structure that can be exploited to improve computational efficiency in both the spatial and temporal dimensions. Exact linear part time-evolution schemes are explicit schemes that remain stable for implicit-size time steps.

54 ENVIRONMENTAL SCIENCES↗

Visual HPC Workflows for the Analysis of System Dynamics Models

Visual analytics supported by high performance computing (HPC) accelerates and enhances the discovery, exploration, and analysis of causal patterns in complex system dynamics (SD) models. We present a suite of visualization-assisted ensemble-based techniques for hypothesis generation and testing, and for sensitivity analysis. By employing HPC to provide parallel, on-demand simulation of SD models, one can “steer” an ensemble of simulated scenarios in real time as one first formulates and then informally tests those hypotheses: this provides rapid feedback for analysts to refine their understanding of the causal relationships emergent from a model. Such understandings can be followed and augmented by rigorous application of statistical methods, namely global variance-based sensitivity analysis, Monte-Carlo filtering, adaptive regional sensitivity analysis, and self-organized maps: here timely computation relies on HPC, while effective presentation emphasizes high-dimensional multivariate data visualization. Immersive visualization in virtual 3D environments provides an excellent adjunct to the traditional 2D graphics typically used for SD models, as it generates an embodied understanding of model behavior and facilitates an active, collaborative critique of model structure and output. Finally, we summarize prospects for HPC-enabled visual analytics applied to SD modeling.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Preliminary performance evaluation of P++ single event proton scattering algorithms on GPUS - 25688

A need has been realized for fast, accurate charged particle transport in a wide variety of domains. Utilizing hardware acceleration through GPUs now common in user desktops, speedups in simulation comparable to those found with HPC systems can be realized for a fraction of the price. Preliminary results on the P++ proton transport code developed by the Rensselaer Radiation Measurement and Dosimetry Group (RRMDG) are presented. The code has been validated for the 1 GeV to 1 MeV energy regime and is targeted to benefit application areas such as proton radiography, space radiation research, and clinical accelerator therapy. The code is notable for employing a single event, 'on the fly' cross section based transport algorithm rather than the traditional condensed history or step based method seen in many production Monte Carlo codes. Performance improvements for the P++ code have been introduced through MPI parallelization as well as a CUDA version of the transport algorithm capable of running on NVidia GPUs. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

PC/104 Embedded IOCs at Jefferson Lab

Jefferson Lab has developed embedded IOCs based on PC/104 single board computers (SBC) for low level control systems. The PC/104 IOCs run EPICS on top of the RTEMS operating system. Two types of control system configurations are used in different applications, PC/104 SBC with commercial PC/104 I/O cards and PC/104 SBC with custom designed FPGA-based boards. RTEMS was built with CEXP shell to run on the PC/104 SBC. CEXP shell provides the function of dynamic object loading, which is similar to the widely used VxWorks operating system. Standard software configurations were setup for PC/104 IOC application development to provide a familiar format for new projects as well as ease the conversion of applications from VME based IOCs to PC/104 IOCs. Many new projects at Jefferson Lab are going to employ PC/104 SBCs as IOCs and some applications have already been running them for accelerator operations. The PC/104 - RTEMS IOC provides a free open source Real-Time Operating System (RTOS), low cost/maintenance, easily installed/ configured, flexible, and reliable solution for accelerator control and 12GeV Upgrade projects.

43 PARTICLE ACCELERATORS↗