Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ASPECT RATIO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

THE FREE-FALL TIME OF FINITE SHEETS AND FILAMENTS

Molecular clouds often exhibit filamentary or sheet-like shapes. We compute the free-fall time ({tau}{sub ff}) for finite, uniform, self-gravitating circular sheets and filamentary clouds of small but finite thickness, so that their volume density {rho} can still be defined. We find that, for thin sheets, the free-fall time is larger than that of a uniform sphere with the same volume density by a factor proportional to {radical}A, where the aspect ratio A is given by A = R/h, R being the sheet's radius and h is its thickness. For filamentary clouds, the aspect ratio is defined as A=L/R, where L is the filament's half-length and R is its (small) radius, and the modification factor is more complicated, although in the limit of large A it again reduces to nearly {radical}A. We propose that our result for filamentary shapes naturally explains the ubiquitous configuration of clumps fed by filaments observed in the densest structures of molecular clouds. Also, the longer free-fall times for non-spherical geometries in general may contribute toward partially alleviating the 'star formation conundrum', namely, the star formation rate in the Galaxy appears to be proceeding in a timescale much larger than the total molecular mass in the Galaxy divided by its typical free-fall time. If molecular clouds are in general formed by thin sheets and long filaments, then their relevant free-fall time may have been systematically underestimated, possibly by factors of up to one order of magnitude.

79 ASTRONOMY AND ASTROPHYSICS↗

EFFECT OF HUMIDITY LEVEL ON THE CREEP PROPERTIES OF ALLOY 903 AT 650 C

Alloy 903 (FeNiCo+Nb) is currently used for certain components in industrial gas turbines for low coefficient of thermal expansion applications. A variance in creep behavior for material quality control evaluations suggested a possible effect of moisture level on stress rupture properties. To investigate the role of water vapor on the creep properties of alloy 903, controlled laboratory experiments were conducted at 650 C with 0 to 100% relative humidity. The water content was controlled by flowing dry air through a water bath at a constant temperature. A significant decrease of lifetime was observed in the presence of water vapor, which is likely related to grain boundary embrittlement by the inward diffusion of hydrogen. The increase of the microstructure grain aspect ratio by different forging processes generally improved the rupture lifetime and elongation in air. However, all specimens had reduced lifetime in the presence of water vapor despite the microstructure grain aspect ratios.

08 HYDROGEN↗

Low defect InGaAs quantum well selectively grown by metal organic chemical vapor deposition on Si(100) 300 mm wafers for next generation non planar devices

Metal organic chemical vapor deposition of GaAs, InGaAs, and AlGaAs on nominal 300 mm Si(100) at temperatures below 550 °C was studied using the selective aspect ratio trapping method. We clearly show that growing directly GaAs on a flat Si surface in a SiO{sub 2} cavity with an aspect ratio as low as 1.3 is efficient to completely annihilate the anti-phase boundary domains. InGaAs quantum wells were grown on a GaAs buffer and exhibit room temperature micro-photoluminescence. Cathodoluminescence reveals the presence of dark spots which could be associated with the presence of emerging dislocation in a direction parallel to the cavity. The InGaAs layers obtained with no antiphase boundaries are perfect candidates for being integrated as channels in n-type metal oxide semiconductor field effect transistor (MOSFET), while the low temperatures used allow the co-integration of p-type MOSFET.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

From Ultrafine Thiolate-Capped Copper Nanoclusters toward Copper Sulfide Nanodiscs: A Thermally Activated Evolution Route

In this report we show that the size, shape, and composition of pre-synthesized metal nanoparticles can be engineered through exploiting concurrent interparticle coalescence and interfacial copper-thiolate cleavage under a thermally-activated evolution process. This concept is demonstrated by thermally-activated processing of ultrafine (~0.5 nm) copper nanoparticles encapsulated with thiolate monolayer (Cun(SR)m) toward copper sulfide nanodiscs with controllable sizes and shapes. It involved a thermally-activated coalescence of Cun(SR)m nanoclusters accompanied by interfacial Cu-S cleavage towards the formation of Cu2S nanocrystals with well-defined nanodisc shapes with an average diameter and thickness ranging from 10.7 ±1.4 nm and 5.5 ±0.5 nm (aspect ratio ~2) to 31.2 ±4.3 nm and 3.9 ±0.4 nm (aspect ratio ~7) depending on the thermal processing parameters. These nanodiscs are stable and display remarkable ordering upon self-assembly. The abilities to create the ultrafine copper nanoclusters and to enable them to undergo a thermally-activated coalescence and a concurrent Cu-S bond cleavage toward the formation of Cu2S nanodiscs is entirely new. The viability of fine tuning the size and shape of the Cu2S nanocrystals by controlling the relative binding strength of thiolates, the C-S cleavage reactivity, and the interparticle coalescence activity, and their potential applications in electronic, sensing and photochemical devices are also discussed.

36 MATERIALS SCIENCE↗

Machine Learning-Enhanced Multiphase CFD for Carbon Capture Modeling Run Data

Repository for the data generated as part of the 2023-2024 ALCC project "Machine Learning-Enhanced Multiphase CFD for Carbon Capture Modeling." The data was generated with MFIX-Exa's CFD-DEM model. The problem of interest is gravity driven, particle-laden, gas-solid flow in a triply-periodic domain of length 2048 particle diameters with an aspect ratio of 4. The mean particle concentration ranges from 1% to 40% and the Archimedes number ranges from 18 to 90. The particle-to-fluid density ratio, particle-particle restitution and friction coefficients and domain aspect ratio are held constant at values of 1000, 0.9, 0.25 and 4, respectively. This research used resources of the National Energy Research Scientific Computing Center, a DOE Office of Science User Facility supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231 using NERSC award ALCC-ERCAP0025948.

AMReX↗

High Precision, High Frequency Printed Antennas

An emerging trend in advanced manufacturing is printed electronics and sensors. The ability to print customized electronics and sensors integrated into functional packages is a growing need within a variety of growing markets such as smart manufacturing, internet of things (IoT), and the small satellite industry. Both Oak Ridge National Laboratory (ORNL) and the MITRE Corporation have seedling research efforts evaluating the potential for future printed electronic systems. High frequency, wide-bandwidth phased array antennas (i.e. >45 GHz) open the door to new applications. However, such sensors require currently prohibitively small feature sizes for commercial 3D printing technologies along with increasing challenges with connecting the driving electronics to such features. An additional finding with related advanced manufacturing challenges is the rapid production of 3D additive connectors for integration with commercial printed circuit boards (PCBs), primarily for advanced in-circuit inspection techniques. This work is developing additive manufacturing processes for producing connected and conductive fine scale 3D features. The primary focus was on aerosol-jet printing (AJP), which has a small minimum resolution (<50 µm) but is traditionally printed flat with small height/width aspect ratios <<1, and developing controls to enable fully 3D, high aspect ratio, and unsupported features. In Phase 1 of this effort, baselines of process performance were characterized, and test coupons produced for both ultra-high frequency antennas and microstructures to support reverse engineering of PCBs. In Phase 2, these efforts will be extended for system demonstration of ultra-high frequency antenna arrays, as well as reverse engineering circuitry for dense PCBs.

42 ENGINEERING↗

Effect of Coherent Lattice Mismatch on the Morphology and Kinetics of Ordered Precipitates

The morphological evolution and precipitation kinetics of ordered precipitates under the influence of lattice mismatch were studied by using the phase field model. The variation of the average aspect ratio of the precipitates and their distributions was investigated quantitatively, and the relationship of particles shape and particles fraction with the variation of the aspect ratio was determined. As the lattice mismatch increases, the coarsening rate constants and the particles number density decrease, the particles size distribution (PSD) becomes narrower, and the peak value of the PSD becomes lower than the value obtained by the Lifshitz–Slyozov–Wagner theory, while it is close to the value obtained by the Brailsford–Wynblatt theory. The change rate of the particles number density shows four-stage characteristics and decreases as the lattice mismatch and time increase, indicating that the precipitation and coarsening are retarded for a large lattice mismatch and that a large lattice mismatch results in fewer particles being dispersed in the matrix phase. The morphology and the particles number density show that a suitable lattice mismatch can enhance the mechanical properties of the alloys.

36 MATERIALS SCIENCE↗

Magnetic reconnection in the presence of externally driven and self-generated turbulence

Magnetic reconnection is an important process that violates flux freezing and induces change of magnetic field topology in conducting fluids and, as a consequence, converts magnetic field energy into particle energy. It is thought to be operative in laboratory, heliophysical, and astrophysical plasmas. These environments exhibit wide variations in collisionality, ranging from collisionless in the Earth's magnetosphere to highly collisional in molecular clouds. A common feature among these plasmas is, however, the presence of turbulence. We review the present understanding of the effects of turbulence on the reconnection rate, discussing both how strong pre-existing turbulence modifies Sweet-Parker reconnection and how turbulence may develop as a result of reconnection itself. In steady state, reconnection rate is proportional to the aspect ratio of the diffusion region. Thus, two general MHD classes of models for fast reconnection have been proposed, differing on whether they keep the aspect ratio finite by increasing the width due to turbulent broadening or shortening the length of the diffusion layer due to plasmoid instability. One of the consequences of the plasmoid instability model is the possibility that the current sheet thins down to collisionless scales where kinetic effects become dominant. As a result, kinetic effects may be of importance for many astrophysical applications which were considered to be in the realm of MHD. Whether pre-existing turbulence can significantly modify the transition to the kinetic regime is not currently known. Although most studies of turbulent reconnection have been based on MHD, recent advances in kinetic simulations are enabling 3D studies of turbulence and reconnection in the collisionless regime. A summary of these recent works, highlighting similarities and differences with the MHD models of turbulent reconnection, as well as comparison with in situ observations in the magnetosphere and in the solar wind, are presented. The paper concludes with a list of important open questions and suggestions for future work.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

GaAs/Ge crystals grown on Si substrates patterned down to the micron scale

Monolithic integration of III-V compounds into high density Si integrated circuits is a key technological challenge for the next generation of optoelectronic devices. In this work, we report on the metal organic vapor phase epitaxy growth of strain-free GaAs crystals on Si substrates patterned down to the micron scale. The differences in thermal expansion coefficient and lattice parameter are adapted by a 2-μm-thick intermediate Ge layer grown by low-energy plasma enhanced chemical vapor deposition. The GaAs crystals evolve during growth towards a pyramidal shape, with lateral facets composed of (111) planes and an apex formed by (137) and (001) surfaces. The influence of the anisotropic GaAs growth kinetics on the final morphology is highlighted by means of scanning and transmission electron microscopy measurements. The effect of the Si pattern geometry, substrate orientation, and crystal aspect ratio on the GaAs structural properties was investigated by means of high resolution X-ray diffraction. The thermal strain relaxation process of GaAs crystals with different aspect ratio is discussed within the framework of linear elasticity theory by Finite Element Method simulations based on realistic geometries extracted from cross-sectional scanning electron microscopy images.

36 MATERIALS SCIENCE↗

Comparative health effects in mice of Libby amphibole asbestos and a fibrous amphibole from Arizona

This project developed from studies demonstrating that Libby Amphibole Asbestos (LAA) causes a non-typical set of health outcomes not generally reported for asbestos, including systemic autoimmunity and an unusual and devastating lamellar pleural thickening that progresses to severe pulmonary dysfunction and death. Further, mineral fiber mixtures with some similarities to LAA have recently been discovered in southern Nevada and northwestern Arizona, where the material exists in extensive recreational areas and is present in yards, roads, parking lots and school yards. The objective was to compare the health outcomes in mice exposed to either LAA or the fibrous amphiboles collected in Arizona at the Lake Mead National Recreational Area at very low doses to represent environmental exposures. In this study, the fibrous amphibole asbestos sample from Arizona (AzA) is composed of winchite (69%), actinolite (22%), and non-amphibole minerals (9%) and has a mean aspect ratio of 16.7 ± 0.9. Fibrous amphibole asbestos from Libby (LAA) is composed of winchite (70%), richterite (9%), tremolite (5%), and non-amphibole minerals (16%) with a mean aspect ratio of 8.4 ± 0.7. C57BL/6 mice were exposed by oropharyngeal aspiration to fiber suspensions at a very low dose of 3 μg/mouse. After seven months, both LAA- and AzA-exposed mice had indices of chronic immune dysfunction related to a T{sub H}17 cytokine profile, with B cell activation, autoantibody production and proteinuria, suggesting kidney involvement. In addition, both exposures led to significant lung and pleural fibrosis. These data suggest that there is risk of pulmonary disease and autoimmune outcomes with environmental exposure to amphibole asbestos, and that this is not limited to Libby, Montana. - Highlights: • Health effects of Arizona versus Libby amphibole asbestos were comparable in mice. • Both fibers led to immune changes consistent with autoimmune dysfunction. • Both fibers caused significant increases in interstitial and pleural fibrosis. • Novel sources of asbestos could pose health risks even at low exposure levels.

60 APPLIED LIFE SCIENCES↗

Characterization of Particle Size Standard NIST 1019b with SynchrotronX-ray Microtomography and Digital Data Extraction

We show that synchrotron x-ray microtomography ({mu}CT) followed by digital data extraction can be used to examine the size distribution and particle morphologies of the polydisperse (750 to 2450 {micro}m diameter) particle size standard NIST 1019b. Our size distribution results are within errors of certified values with data collected at 19.5 {micro}m/voxel. One of the advantages of using {mu}CT to investigate the particles examined here is that the morphology of the glass beads can be directly examined. We use the shape metrics aspect ratio and sphericity to examine of individual standard beads morphologies as a function of spherical equivalent diameters. We find that the majority of standard beads possess near-spherical aspect ratios and sphericities, but deviations are present at the lower end of the size range. The majority (> 98%) of particles also possess an equant form when examined using a common measure of equidimensionality. Although the NIST 1019b standard consists of loose particles, we point out that an advantage of {mu}CT is that coherent materials comprised of particles can be examined without disaggregation.

36 MATERIALS SCIENCE↗

Evaluation of advanced automatic PET segmentation methods using nonspherical thin-wall inserts

Purpose: The use of positron emission tomography (PET) within radiotherapy treatment planning requires the availability of reliable and accurate segmentation tools. PET automatic segmentation (PET-AS) methods have been recommended for the delineation of tumors, but there is still a lack of thorough validation and cross-comparison of such methods using clinically relevant data. In particular, studies validating PET segmentation tools mainly use phantoms with thick plastic walls inserts of simple spherical geometry and have not specifically investigated the effect of the target object geometry on the delineation accuracy. Our work therefore aimed at generating clinically realistic data using nonspherical thin-wall plastic inserts, for the evaluation and comparison of a set of eight promising PET-AS approaches. Methods: Sixteen nonspherical inserts were manufactured with a plastic wall of 0.18 mm and scanned within a custom plastic phantom. These included ellipsoids and toroids derived with different volumes, as well as tubes, pear- and drop-shaped inserts with different aspect ratios. A set of six spheres of volumes ranging from 0.5 to 102 ml was used for a baseline study. A selection of eight PET-AS methods, written in house, was applied to the images obtained. The methods represented promising segmentation approaches such as adaptive iterative thresholding, region-growing, clustering and gradient-based schemes. The delineation accuracy was measured in terms of overlap with the computed tomography reference contour, using the dice similarity coefficient (DSC), and error in dimensions. Results: The delineation accuracy was lower for nonspherical inserts than for spheres of the same volume in 88% cases. Slice-by-slice gradient-based methods, showed particularly lower DSC for tori (DSC < 0.5), caused by a failure to recover the object geometry. The region-growing method reached high levels of accuracy for most inserts (DSC > 0.76 except for tori) but showed the largest errors in the recovery of pears and drops dimensions (higher than 10% and 30% of the true length, respectively). Large errors were visible for one of the gradient-based contouring methods when delineating drop-shaped inserts. Low DSC due to systematic underestimation of the volumes was observed for our fuzzy clustering method when using nonspherical inserts. The adaptive iterative thresholding method produced the highest DSC score on our nonspherical dataset (DSC > 0.83, except for tori) and showed robustness to the insert geometry. Conclusions: This study investigated the accuracy of eight PET-AS methods for the delineation of objects with a range of nonspherical geometries. The authors’ results confirmed the robustness of some segmentation approaches, but also showed the weaknesses of some of the other methods implemented, which were not observed with spherical inserts. This work therefore highlights the importance of using a variety of thin-wall inserts with complex geometries for the validation of PET-AS methods and provided useful information for further development of the methods tested.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Concept Design and Analysis of the Magnet System of the Sustained High Power Density Tokamak Facility

A recent National Academy study recommended a next-step sustained high power density (SHPD) facility for the United States that can be a bridge to a compact fusion pilot plant. A design has been initiated to investigate a possible SHPD non-deuterium-tritium device that builds upon recent low aspect ratio tokamak studies. Here, a 1.2-m device with a 2.4 aspect ratio has been chosen to evaluate physics performance goals within a double-null plasma machine arrangement centered on three component features: high current density toroidal field (TF) and central ohmic heating/poloidal field (PF) coils, liquid metal divertor/first wall systems, and the integration of a limited set of outboard dual-coolant lead lithium test blankets that can be maintained within a vertical maintenance approach.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Calculation of neoclassical toroidal viscosity with a particle simulation in the tokamak magnetic braking experiments

Accurate calculation of perturbed distribution function δf and perturbed magnetic field δB is essential to achieve prediction of non-ambipolar transport and neoclassical toroidal viscosity (NTV) in perturbed tokamaks. This paper reports a study of the NTV with a δf particle code (POCA) and improved understanding of magnetic braking in tokamak experiments. POCA calculates the NTV by computing δf with guiding-center orbit motion and using δB from the ideal perturbed equilibrium code (IPEC). POCA simulations are compared with experimental estimations for NTV, which are measured from angular momentum balance (DIII-D) and toroidal rotational damping rate (NSTX). The calculation shows good agreement in total NTV torque for the DIII-D discharge, where an analytic neoclassical theory also gives a consistent result thanks to relatively large aspect-ratio and slow toroidal rotations. In NSTX discharges, where the aspect-ratio is small and the rotation is fast, the theory only gives a qualitative guide for predicting NTV. However, the POCA simulation largely improves the quantitative NTV prediction for NSTX. It is discussed that a self-consistent calculation of δB using general perturbed equilibria is eventually necessary since a non-ideal plasma response can change the perturbed field and thereby the NTV torque.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Confocal Annular Josephson Tunnel Junctions with Large Eccentricity

Confocal annular Josephson tunnel junctions (CAJTJs), which are the natural generalization of the circular annular Josephson tunnel junctions, have a rich nonlinear phenomenology due to the intrinsic non-uniformity of their planar tunnel barrier delimited by two closely spaced confocal ellipses. In the presence of a uniform magnetic field in the barrier plane, the periodically changing width of the elliptical annulus generates a asymmetric double-well for a Josephson vortex trapped in a long and narrow CAJTJ. The preparation and readout of the vortex pinned in one of the two potential minima, which are important for the possible realization of a vortex qubit, have been numerically and experimentally investigated for CAJTJs with the moderate aspect ratio 2:1. In this work, we focus on the impact of the annulus eccentricity on the properties of the vortex potential profile and study the depinning mechanism of a fluxon in more eccentric samples with aspect ratio 4:1. We also discuss the effects of the temperature-dependent losses as well as the influence of the current and magnetic noise.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Jump conditions in transonic equilibria

In the present paper, the numerical calculation of transonic equilibria, first introduced with the FLOW code in Guazzotto et al.[Phys. Plasmas 11, 604 (2004)], is critically reviewed. In particular, the necessity and effect of imposing explicit jump conditions at the transonic discontinuity are investigated. It is found that 'standard' (low-{beta}, large aspect ratio) transonic equilibria satisfy the correct jump condition with very good approximation even if the jump condition is not explicitly imposed. On the other hand, it is also found that high-{beta}, low aspect ratio equilibria require the correct jump condition to be explicitly imposed. Various numerical approaches are described to modify FLOW to include the jump condition. It is proved that the new methods converge to the correct solution even in extreme cases of very large {beta}, while they agree with the results obtained with the old implementation of FLOW in lower-{beta} equilibria.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Growth dynamics of copper oxide nanowires in plasma at low pressures

The growth time dynamics of the copper oxide nanowires (NWs) in radiofrequency plasma discharge were investigated. Grounded copper samples were treated in argon-oxygen plasma with the discharge power of 150 W for sequenced times up to 20 min. After the treatment, the samples were analysed with scanning electron microscopy and image processing to obtain the length and aspect ratio of the NWs. A growth mode with the saturation was observed in dependence to NW length, where the maximal length of 5 μm was achieved in 20 min. However, the best NW aspect ratio had maximum of about 40 after 10 min of plasma treatment. To describe and understand nanowire growth mechanism, a theoretical model was developed and it is in agreement with the experiment. The model results indicate that different densities of the ion current to the side and top area of NW modify the NW growth in height and width. The NW growth is enhanced by presence of ions, and thus this implies that it can be controlled by discharge power. This explains much faster growth of copper oxide nanowires in plasma environment compared to prolonged thermal treatments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Binary mixed homopolymer brushes grafted on nanorod particles: A self-consistent field theory study

We employ the self-consistent field theory to study phase structures of brush-rod systems composed of two chemically distinct linear homopolymers. The polymer chains are uniformly grafted on the surface of a nanorod particle of finite length and comparable radius to the polymer radius of gyration. A “masking” technique treating the cylindrical boundary is introduced to solve the modified diffusion equations with an efficient and high-order accurate pseudospectral method involving fast Fourier transform on an orthorhombic cell. A rich variety of structures for the phase separated brushes is predicted. Phase diagrams involving a series of system parameters, such as the aspect ratio of the nanorod, the grafting density, and the chain length are constructed. The results indicate that the phase structure of the mixed brush-rod system can be tailored by varying the grafted chain length and/or the aspect ratio of the rod to benefit the fabrication of polymeric nanocomposites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗