Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ANALOG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

Conversion of cardiac performance data in analog form for digital computer entry

A system is presented which will reduce analog cardiac performance data and convert the results to digital form for direct entry into a commercial time-shared computer. Circuits are discussed which perform the measurement and digital conversion of instantaneous systolic and diastolic parameters from the analog blood pressure waveform. Digital averaging over a selected number of heart cycles is performed on these measurements, as well as those of flow and heart rate. The determination of average cardiac output and peripheral resistance, including trends, is the end result after processing by digital computer.

Miller, R. L.↗

An analog-to-digital conversion system with a logarithmic characteristic

Detailed analysis of an analog-to-digital conversion system consisting of a linear converter and a logarithmic amplifier containing nonlinear elements. It is shown that the small-signal resolution of such a system is much greater than that of linear systems used under the same conditions. A design for a low-power analog-to-digital converter operating at medium speed with a large input signal variation field is outlined.

Bellomo, A.↗

Isolated transfer of analog signals

Technique transfers analog signal levels across high isolation boundary without circuit performance being affected by magnetizing reactance or leakage inductance. Transfers of analog information across isolated boundary are made by interrupting signal flow, with switch, in such a manner as to produce alternating signal which is applied to transformer.

Bezdek, T.↗

A slow-speed multiple-channel analog-to-digital data logging system

The system was developed to record from one up to a maximum of sixteen channels of analog data onto magnetic tape. Each analog channel of data can be sampled at rates of 1, 2, 6, 12, or 60 times per minute. The system is divided into three subunits: a digital clock, an incremental magnetic tape recorder, and a sequential converter. The interfacing requirements of these subunits are presented.

Lloyd, T. C.↗

Digital to analog conversion apparatus

A digital to analog converter which improves the accuracy of reconstruction of a sampled analog signal without requiring that the sampling rate of the original signal be increased to obtain such accuracy.

Dotson, W. P., Jr.↗

Some textures in Apollo 12 lunar igneous rocks and in terrestrial analogs.

The interpretation of immature crystallization and some lunar textures characterized by it are the principal objectives of this investigation. A comparative and selective approach is adopted, and particular reference is made to the form and textural relations of olivine in 12009 and of pyroxenes and plagioclase in 12021, and to terrestrial analogs. The optic orientation of the olivines in 12009 is determined, and their skeletal crystallization is illustrated and evaluated. Microprobe and optical data are associated in a textural analysis of an analog from the upper contact of a minor intrusion in Skye. The optic orientation of pyroxene enclosed in plagioclase cores is determined, and the results are plotted stereographically. The need for greater precision in the use of textural terms is stressed, and a new term - intrafasciculate - is introduced for textures in which pyroxene has crystallized within hollow, skeletal plagioclase. Apollo 12 pyroxene-phyric basalts are texturally reviewed, and the crystallization of the phenocrysts is discussed, emphasis being placed on size-independence of skeletal growth.

Drever, H. I.↗

Analog computer implementation of four instantaneous distortion indices

Dynamic distortion data obtained from inlet engine compatibility test on a J85-GE-13 engine are used to establish the feasibility of using on-line generated indices as control signals. These data are analyzed over time increments of 1.3 seconds on an analog computer. The analog program of four instantaneous distortion indices and their results are presented. A modified approach in determining the extent of distortion is also presented.

Costakis, W. G.↗

Results of investigating thermal and electrical properties of lunar surface material and its analogs

Thermal and electrical properties are reported of lunar surface material returned to Earth by the Luna 16 automatic station and its terrestrial analogs studied in a vacuum and in a helium atmosphere. Study of the lunar surface material and its analogs showed that their specific heat capacity and electrical properties are similar in value but the coefficients of thermal conductivity differ. The results are compared with data on thermal and electrical properties of the surficial layer of the Moon obtained by indirect radiometric methods, and with results obtained for samples of lunar surface material returned to Earth by the crew of the Apollo 11 spacecraft.

Golovkin, A. R.↗

Small parametric model of the precomputation of meteorological fields on the basis of complete equations and its energetic analogs

A small parametric, nonadiabatic model for precomputation of meteorological fields on the basis of complete equations, along with its energetic analogs is described. The model incorporates integral characteristics of the components of the wind speed and the analogous functions of the total fluxes of the ocean, and uses a Cartesian isobaric system of coordinates.

Borisenkov, Y. P.↗

Digital phase-locked-loop speed sensor for accuracy improvement in analog speed controls

A digital speed control that can be combined with a proportional analog controller is described. The stability and transient response of the analog controller were retained and combined with the long-term accuracy of a crystal-controlled integral controller. A relatively simple circuit was developed by using phase-locked-loop techniques and total error storage. The integral digital controller will maintain speed control accuracy equal to that of the crystal reference oscillator.

Birchenough, A. G.↗

Alaskan thermokarst terrain and possible Martian analog

A first-order analog to Martian fretted terrain has been recognized on enhanced, ERTS-1 (Earth Resources Technology Satellite) imagery of Alaskan Arctic thermokarst terrain. The Alaskan analog displays flat-floored valleys and intervalley uplands characteristic of fretted terrain. The thermokarst terrain has formed in a manner similar to one of the processes postulated for the development of the Martian fretted terrain.

Gatto, L. W.↗

Geologic analyses of LANDSAT-1 multispectral imagery of a possible power plant site employing digital and analog image processing

A site in the Great Valley subsection of the Valley and Ridge physiographic province in eastern Pennsylvania was studied to evaluate the use of digital and analog image processing for geologic investigations. Ground truth at the site was obtained by a field mapping program, a subsurface exploration investigation and a review of available published and unpublished literature. Remote sensing data were analyzed using standard manual techniques. LANDSAT-1 imagery was analyzed using digital image processing employing the multispectral Image 100 system and using analog color processing employing the VP-8 image analyzer. This study deals primarily with linears identified employing image processing and correlation of these linears with known structural features and with linears identified manual interpretation; and the identification of rock outcrops in areas of extensive vegetative cover employing image processing. The results of this study indicate that image processing can be a cost-effective tool for evaluating geologic and linear features for regional studies encompassing large areas such as for power plant siting. Digital image processing can be an effective tool for identifying rock outcrops in areas of heavy vegetative cover.

Lovegreen, J. R.↗

Some recent applications of the suction analogy to vortex-lift estimates

An extension of the suction analogy for the estimation of vortex lift along the side edge of wings is reviewed along with the concept of an augmented vortex lift to account for the effect of the leading-edge vortex passing downstream over an aft part of the model. Applications of these extensions have resulted in an improved estimating capability for a wide range of isolated sharp-edge planforms and also for multiple lifting surfaces. Hence, the suction analogy concept can now have wider applicability at both subsonic and supersonic speeds, especially in the preliminary design cycle.

Lamar, J. E.↗

An investigation of potential applications of OP-SAPS: Operational sampled analog processors

The impact of charge-coupled device (CCD) processors on future instrumentation was investigated. The CCD devices studied process sampled analog data and are referred to as OP-SAPS - operational sampled analog processors. Preliminary studies into various architectural configurations for systems composed of OP-SAPS show that they have potential in such diverse applications as pattern recognition and automatic control. It appears probable that OP-SAPS may be used to construct computing structures which can serve as special peripherals to large-scale computer complexes used in real time flight simulation. The research was limited to the following benchmark programs: (1) face recognition, (2) voice command and control, (3) terrain classification, and (4) terrain identification. A small amount of effort was spent on examining a method by which OP-SAPS may be used to decrease the limiting ground sampling distance encountered in remote sensing from satellites.

Parrish, E. A.↗

Data reduction complex analog-to-digital data processing requirements for onsite test facilities

The analog to digital processing requirements of onsite test facilities are described. The source and medium of all input data to the Data Reduction Complex (DRC) and the destination and medium of all output products of the analog-to-digital processing are identified. Additionally, preliminary input and output data formats are presented along with the planned use of the output products.

Debbrecht, J. D.↗

Some recent applications of the suction analogy to asymmetric flow situations

A recent extension of the suction analogy for the estimation of vortex loads on asymmetric configurations was reviewed. This includes the asymmetric augmented vortex lift and the forward sweep effect on side edge suction. Application of this extension to a series of skewed wings has resulted in an improved estimating capability for a wide range of asymmetric flow situations. Hence, the suction analogy concept now has more general applicability for subsonic lifting surface analysis.

Luckring, J. M.↗

An application of the suction analog for the analysis of asymmetric flow situations

A recent extension of the suction analogy for estimation of vortex loads on asymmetric configurations is reviewed. This extension includes asymmetric augmented vortex lift and the forward sweep effect on side edge suction. Application of this extension to a series of skewed wings has resulted in an improved estimating capability for a wide range of asymmetric flow situations. Hence, the suction analogy concept now has more general applicability for subsonic lifting surface analysis.

Luckring, J. M.↗

Theory and applications of sampled analog recursive CTD comb filters

Sampled analog comb filter using a recursive filter implementation was studied. Charge transfer device delay lines were used as the delay elements. The similarities and differences between sampled analog recursive filter and digital recursive filter were pointed out. Both canceller type and integrator type comb filter using the first order or the second order canonical circuits were studied. Experimental results of frequency response are presented to show their difference from that of digital filters. A theoretical analysis was presented based essentially on the digital filter theory but modified to take into account the differences described above. The usefulness of this theory in analyzing the comb filter characteristics was discussed. Several applications of both the canceller type comb filter and the integrator type comb filter were demonstrated.

Tao, T. F.↗