Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ALTITUDE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 415 records · Page 23

A Climatology of Clear-Air Turbulence and Mountain Wave Turbulence Throughout the Stratosphere Using MERRA-2 Data

Forty years of MERRA-2 reanalysis data is used to calculate twenty-nine unique indices for both clear-air turbulence (CAT) and mountain wave turbulence (MWT) throughout the stratosphere. The indices are combined into a single estimate of turbulence intensity for both CAT and MWT for five latitudinal domains. These indices have previously been applied at commercial flight levels, but this work is the first time such indices have been evaluated for estimating turbulence throughout the entire stratosphere. The results indicate that turbulence throughout the stratosphere is generally around four-times more intense in the winter season and increases in intensity with altitude. The data suggests the strongest source of CAT in each hemisphere is the polar vortex in the winter stratosphere above 50 hPa. The strongest sources of MWT are the Himalayas and the Andes in the lower stratosphere. The relationship between CAT and the quasi-biennial oscillation is also examined and indicates that easterly tropical winds are associated with the most intense turbulence. The trends in the climatology of CAT over forty years were compared indicating a significant increase in turbulence intensity in the upper stratosphere, and a weaker but still significant decrease in turbulence intensity in the lower stratosphere.

54 ENVIRONMENTAL SCIENCES↗

Texas A&M University Mobile Facility Measurements during TRACER (Field Campaign Report)

One of the main goals of the U.S Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Tracking Aerosol Convection Interactions Experiment (TRACER) near Houston, Texas is to improve understanding of how meteorology and aerosols impact storm dynamical and microphysical processes in deep convection to better constrain and improve their model representation. The Houston area is strongly influenced by sea- and bay-breeze circulations that generate convergence and help to initiate and organize deep convection. To properly isolate and understand the roles of varied meteorological conditions and cloud condensation nuclei (CCN) and ice nucleation particles (INP) distributions in different air masses, co-located thermodynamic, kinematic, and aerosol vertical profile observations are needed. The focus of this campaign was to provide key measurements in air masses both in front of and behind sea/bay breeze fronts moving through the greater Houston area to sample the airmass heterogeneity. The overarching scientific goal of this campaign is to understand how the vertical distributions of both CCN and INP correspond to the inflow layer of deep convection in maritime, background continental, and polluted continental air masses, and how these variations influence deep convection. To fully sample the heterogeneity in both meteorological conditions and aerosols across the sea-breeze front (SBF), Texas A&M University (TAMU) deployed a InterMet 3050A 403 MHz mobile unit launching iMet-4 radiosondes and the new Rapid Onsite Atmospheric Measurement Van (ROAM-V) for aerosol sampling during the TRACER intensive operational period (IOP) from June to September 2022. The suite of instruments deployed on ROAM-V included a condensation particle counter (CPC; GRIMM Model 5.403 CPC), scanning mobility particle sizer (SMPS; TSI 3750 detector, TSI 3082 classifier, TSI 3088 neutralizer, TSI 3081A differential mobility analyzer), cloud condensation nuclei counter (Droplet Measurement Technologies CCN counter), micropulse lidar (Droplet Measurement Technologies micropulse lidar [miniMPL]), and a Davis Rotating Uniform size-cut Monitor (DRUM; DRUMAir 4-DRUM). Before sampling at each location, the latitude and longitude were recorded using the Global Positioning System (GPS) on the phone application “My Altitude”. The DRUM data were collected as part of a closely related ARM field campaign and also supported by DOE Atmospheric System Research grant DE-SC0021047. The TAMU team sampled these airmass heterogeneities by strategically choosing deployment sites in a different airmass than the ARM fixed sites in La Porte and Guy, Texas. On days when the sea/bay breeze boundary was pushing inland, the TAMU team would usually sample the airmass on the maritime side of the SBF at a coastal site in Galveston, Texas in the early afternoon (1730-1900 UTC) and then move inland ahead of the SBF to sample the airmass on the continental side during late afternoon (2030-2230). Figure 1 shows the Galveston maritime site and the array of sites for the late afternoon continental measurements.

54 ENVIRONMENTAL SCIENCES↗

TRACER-Vertical Profile of Aerosol in Convective System (TRACER-VPACS) Field Campaign Report

We investigated physicochemical properties of aerosol at different altitudes during the U.S. Department of Energy (DOE)’s Atmospheric Radiation Measurement (ARM) user facility Tracking Aerosol Convection Interactions Experiment (TRACER). We used ARM’s tethered balloon system (TBS) and multi-modal offline analysis techniques available at DOE’s Environmental Molecular Sciences Laboratory (EMSL) at Pacific Northwest National Laboratory (PNNL) and at the Advanced Light Source (ALS) at the Lawrence Berkley National Laboratory (LBNL). The main scientific aim of this project was to understand the influence of the vertical profile of aerosol composition on the properties of deep convective clouds. The effect of aerosol properties on convective activity is still poorly understood and debated. For example, previous studies suggested that higher concentration of hygroscopic aerosol may lead to lower collection efficiency and eventually delay in onset of precipitation and total amount of precipitation. However, some observations suggested that increased aerosol concentration may result in vigorous convection and a higher amount of precipitation. In addition, the radiative forcing of the ambient aerosol is strongly influenced by the vertical distribution of aerosols and their chemical composition, and not well constrained in climate models. The estimation of the indirect effect of aerosol also has a significant uncertainty due to the spatial variation of the aerosol, especially at the cloud base. Detailed size-resolved chemical composition studies of aerosol and their microphysical properties, along with in situ measurements from ARM’s mobile facilities, help to improve our understanding of the role of aerosol in deep convective cloud formation over a broad range of environmental thermodynamic and aerosol conditions.

54 ENVIRONMENTAL SCIENCES↗

Creating a High Energy Alert System for the HAWC Gamma Ray Observatory [Slides]

One of the greatest mysteries in astrophysics is exactly how Cosmic Rays (CRs) are accelerated up to extremely high energies within our galaxy. Hadronic models of possible CR accelerators, including supernova remnants and pulsars, require the production of both gamma rays and neutrinos at these sources. Searching for coincidences between neutrino and the highest energy gamma ray observations can help confirm these theories. The High Altitude Water Cherenkov (HAWC) observatory is a ground based gamma ray observatory located at 4100m in Puebla, Mexico. HAWC is able to detect gamma rays with energies greater than 100 TeV, has a wide field of view, and a 95% duty cycle, making it ideal for these types of coincidence searches. This work aims to create a high energy alert system for HAWC, sending out an alert to other experiments for gamma ray events it sees above 56 TeV.

79 ASTRONOMY AND ASTROPHYSICS↗

User Guide for the Los Alamos National Laboratory Fallout Calculator (V.1.1)

The Los Alamos National Laboratory Fallout Calculator is a Java™ application that can calculate the dose from many nuclear detonations producing fallout. The fallout calculations are performed for one or multiple selected winds. The winds are from the years 2000 to 2010, for all 12 months, and for the 1 st , 10 th , and 20 th of each month. The winds are available from 0 meters to 50,000 meters altitude MSL. This Fallout Calculator performs ideal calculations. There is no terrain. The ground is perfectly flat at sea level. There is no rain that would cause radioactive hot spots. The wind is historical, not a current wind. Also, the wind is fixed in time. It does not vary over the 24 hours it takes the fallout to arrive on the ground. Therefore, this calculator is suitable for operational type studies. For instance, it can be used to calculate the relative difference in fallout patterns from different possible nuclear laydowns. It can be used to understand how frequently fallout would be likely to occur in a particular part of the US. It could be used to develop plans for how to protect the population from a nuclear attack. However, it should not be used to predict the dose in a city from an actual laydown, or to predict safe corridors for the population to use to egress from areas with high fallout.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Creating a high energy alert system for the HAWC gamma ray observatory

One of the greatest mysteries in astrophysics is exactly how Cosmic Rays (CRs) are accelerated up to extremely high energies within our galaxy. The highest-energy galactic CRs are associated with gamma rays at ~100 TeV. Hadronic models of possible CR accelerators, including supernova remnants and pulsars, require the production of both gamma rays and neutrinos at these sources. Searching for coincidences between neutrino and the highest energy gamma ray observations can help confirm these theories. The High Altitude Water Cherenkov (HAWC) observatory is a ground based gamma ray observatory located in Puebla, Mexico. HAWC is able to detect gamma rays with energies greater than 100 TeV. It has a wide field of view and a 95% duty cycle, making it ideal for these types of coincidence searches. This work aims to create a high energy alert system for HAWC, sending out an alert to other experiments for high-energy gamma ray events it sees.

79 ASTRONOMY AND ASTROPHYSICS↗

Closure Report for the Project Shoal Area: Subsurface Corrective Action Unit 447 Shoal,Nevada, Site

The U.S. Department of Energy (DOE) Office of Legacy Management (LM) has prepared this Closure Report for subsurface Corrective Action Unit (CAU) 447 at the Shoal, Nevada, Site, which was formerly called the Project Shoal Area. The Shoal site was the location of an underground nuclear test in 1963 that resulted in residual radionuclide contamination at the detonation depth of 1211 feet (ft) (DOE 2015a). The environmental restoration process and Corrective Action strategy are conducted in accordance with the Federal Facility Agreement and Consent Order (FFACO) (FFACO 1996, as amended) and all applicable Nevada Division of Environmental Protection (NDEP) statues and regulations. Responsibility for the environmental site restoration was transferred from the DOE, National Nuclear Security Administration, Nevada Field Office, to LM on October 1, 2006. The Shoal site is south of U.S. Highway 50, approximately 30 miles southeast of Fallon, in Churchill County, Nevada (Figure 1). The site was selected for underground nuclear testing in 1961, as part of the Vela Uniform Program. Vela was a research and development program directed toward locating, detecting, and identifying underground and high-altitude nuclear detonations. The Vela Uniform program was specific to underground detonations (AEC 1964). The objective of Project Shoal was to detonate a nuclear device underground in an active seismic area to improve the United States’ ability to detect, identify, and locate underground nuclear detonations. The underground nuclear test at Shoal was a joint effort between the U.S. Department of Defense (DOD) and the U.S. Atomic Energy Commission (AEC), which was the predecessor agency to DOE. Figure 1 is a map showing the site location.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Understanding the Vertical Transport and Removal of Aerosols during Deep Convective Events

Atmospheric aerosols affect the global energy budget by scattering and absorbing sunlight (direct effects) and by changing the microphysical structure, lifetime, and coverage of clouds (indirect effects). Globally, the free troposphere is a major source of nucleation- and Aitken-mode aerosols due to the enhanced new particle formation rates at high altitudes. Recent studies have shown deep convective systems are capable of transporting these small aerosols from the free troposphere to the boundary layer by strong convective downdrafts and weaker downward motions in the stratiform regions. These vertically transported aerosols can grow into cloud condensation nuclei (CCN) and play a significant role in the global climate. During the deep convective processes, existing accumulation-mode aerosols that act as coagulation sinks of smaller particles are also removed by wet scavenging. Compared to the vertical transport of these particles by entrainment mixing, which is slower but more prevalent, the deep convective downdraft processes may be more rapid and efficient in the vertical transport of aerosols. However, most of the current climate models do not include this mechanism as a source of CCN, mainly because the frequency of deep convective events varies significantly with geographic location and thus their contributions to CCN are unpredictable.

54 ENVIRONMENTAL SCIENCES↗

Algorithm Theoretical Basis Document For PreMevE 2.0 Model

Man-made satellites operating in medium- and high-altitude Earth orbits are continuously exposed to hazardous space radiation originated from different sources. Among them, one major contributor is the relativistic electron population—with kinetic energies comparable to or larger than their rest energy of 0.511 Megaelectron-volt (MeV)—trapped inside Earth’s outer Van Allen belt. Owing to their high penetration capability, these MeV electrons are difficult to be fully stopped by normal shielding. Particularly, during MeV electron events when electron intensities across the outer belt are greatly elevated to sustaining high levels—up to 10 3 - 10 4 times as observed in the geosynchronous (GEO) orbit and low-Earth-orbits (LEOs), space-borne electronic systems with inadequate hardening are susceptible to deep-dielectric charging and discharging phenomenon caused by those electrons, and thus may suffer severe damages or even stop functioning. Therefore, protecting critical space infrastructures from harsh space weather conditions– including MeV electron events – has high priority for many space sectors, such as the aerospace industry, service providers and government agencies.

79 ASTRONOMY AND ASTROPHYSICS↗

Computational Tool for Cosmic Ray Flux and Cosmogenic Activation Production Rates

Silicon charge couple devices (CCDs) are used in direct detection dark matter searches. Silicon can be obtained with very high purity and negligible amounts of radioactive contaminants. However, silicon exposed to cosmic rays can be activated, leading to the buildup of radioactive isotopes such as tritium. The decay of tritium can produce signals that cannot be distinguished from the expected signals of dark matter interactions and tritium produced by cosmic rays is expected as one of the leading sources of background for next-generation experiments. The cosmic ray flux depends on variables such as geomagnetic latitude and longitude, atmospheric depth/altitude, solar activity, and surrounding environment for example. The goal of this work is to create a tool that will evaluate the total cosmic ray exposure and related tritium production rate for any given exposure history of a silicon detector. EXcel-based Program for calculation Atmospheric Cosmic-ray Spectrum (EXPACS) was used to obtain the cosmic ray fluxes. We have worked on creating a 3-dimensional gird that spans latitude, longitude, and altitude, and can be used to interpolate the cosmic ray flux at any given location. This computation tool additionally has use for work requiring knowledge of the cosmic ray flux at multiple locations.

79 ASTRONOMY AND ASTROPHYSICS↗

Project Title: Adaptive Vertical Grid Enhancement for E3SM (Final Technical Report)

During the first phase of the project (2018/05-2021/05), we proved the hypothesis that, without tuning, high vertical resolution improves the representation of unresolved, parameterized low altitude clouds such as stratocumulus clouds in global climate models. We evaluated the effectiveness of the newly developed computational framework, Framework for Improvement by Vertical Enhancement (FIVE) by implementing it into E3SM. FIVE aims to improve representation of the target cloud, low level cloud for this project, with use of a locally high vertical resolution for computation of selected processes. FIVE was assessed via direct comparison among E3SM, E3SM-FIVE, and satellite data as well as a newly developed ensemble artificial neural network methodology. We demonstrated that E3SM-FIVE remarkably improves marine stratocumulus representation. To advance the FIVE methodology, we took a first step toward the adaptive vertical grid in the FIVE method by modifying the E3SM single column model. For future application of FIVE to the global storm resolving model with a few km horizontal grid resolution, we developed the vertical-meridional two-dimensional (2D) Hadley circulation model, which allows one to run simulations with much higher vertical resolution and significantly longer duration than current three-dimensional global storm resolving model. During the second phase of the project (2021/05-2023/11; period for this technical report), we sought a way to appropriately transform FIVE to a regionalized version of FIVE, which allows one to select locations with/without FIVE. In parallel, we demonstrated that E3SM-FIVE with a 25-km mesh significantly reduced the bias associated with coastal stratocumulus. Furthermore, we showed that the same improvement was able to be obtained with the use of both the Regional Refined Model (RRM) targeted to one of the stratocumulus regions with 25-km resolution and FIVE. We explored a new implementation strategy of FIVE with our 2D Hadley circulation model. In parallel we applied the 2D Hadley circulation model to study the double intertropical convergence zone bias with storm resolving model resolution and aerosol-cloud interactions within the Hadley circulation with near large eddy simulation resolution. Last, we have been investigating Arctic mixed-phase stratocumulus clouds with large eddy simulations in order to improve their representation in global models. During the course of the entire project, 6 journal articles were published, and 3 manuscripts are currently in preparation. We gave a total of 30 presentations at various domestic and international conferences. In addition we gave 6 seminar talks at universities and a national laboratory. E3SM- FIVE is available as a branch of E3SM.

54 ENVIRONMENTAL SCIENCES↗

EMP Testing of NAE Magnetic Motor Starters

Sandia National Laboratories (SNL) performed a high-altitude nuclear electromagnetic pulse (HEMP) critical generation station component vulnerability test campaign with a focus on high-frequency, conducted early-time (E1) HEMP for the Department of Energy (DOE) Office of Cybersecurity, Energy Security, and Emergency Response (CESER). This report provides vulnerability test results to investigate component response and/or damage thresholds to reasonable HEMP threat levels that will help to inform site vulnerability assessments, mitigation planning, and modeling calibrations. This work details testing of North American Electric (NAE) magnetic motor starters to determine the effects of conducted HEMP environments. Motor starters are the control elements that provide power to motors throughout a generating plant; a starter going offline would cause loss of power to critical pumps and compressors, which could lead to component damage or unplanned plant outages. Additionally, failed starters would be unable to support plant startup. Six industrial motor starters were tested: two 2 horsepower (HP) starters with breaker disconnects and typical protection equipment, two 20 HP starters with breaker disconnects, and two 20 HP starters with fused disconnects. Each starter was placed in a circuit with a generator and inductive motor matching the starter rating. The conducted EMP insult was injected on the power cables passing through the motor starter, with separate tests for the generator and motor sides of the starter.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Clustering Acoustic Background Noise in the Stratosphere Using Machine Learning

Infrasound, characterized by low-frequency sound inaudible to humans (<20 Hz), emanates from natural and anthropogenic sources. Its efficacy for monitoring phenomena necessitates robust sensing networks. Traditional ground-based infrasound sensors have limitations due to atmospheric dynamics and noise interference. Balloon-bore sensors have emerged as an alternative, offering reduced noise and improved capabilities. This study bridges clustering algorithms with balloon borne infrasound data, a domain yet to be explored. Employing K-Means, DBSCAN, and GMM algorithms on normalized and reshaped data and only normalized data from a New Zealand-based NASA balloon flight, insights into background noise at stratospheric altitudes were revealed. Despite challenges arising from distinguishing signals amid unique background noise, this research provides vital reference material for noise analysis and calibration. Beyond infrasound event capture, the dataset enriches comprehension of background noise characteristics in the southern hemisphere.

47 OTHER INSTRUMENTATION↗

4.5m GTEM RS105 Test Capability Commissioning

This work details the reconfiguration of the 4.5 m Gigahertz Transverse Electromagnetic test facility at Sandia National Laboratories to operate in accordance with the RS105 (radiated susceptibility) test from MIL-STD-461 representing a high-altitude electromagnetic pulse. This reconfiguration involved removal of the existing continuous wave source and connecting both a high voltage feed and a coaxial feed housing the Marx bank pulser. Marx control settings were calibrated for several voltage levels across two pulsers, and position-dependent measurements of the peak electric field were taken throughout the test volume for each pulser. The results showed field uniformity and purity across the test volume comparable to continuous wave operations, and field peaks were measured from 1.63 kV/m to 54.8 kV/m, with maximum capabilities expected to exceed 100 kV/m. Some challenges in consistent pulser operations at lower Marx bank voltages and high frequency reflections in the system were identified for future capability improvements.

42 ENGINEERING↗

SAF Combustion & Soot Processes [Slides]

The atomization, mixing, combustion and emissions characteristics of aviation fuels were measured using a novel approach based on a non-continuous injection scheme called the single-hole atomizer (SHA). High-speed microscopy revealed differences between fuels in terms of evaporation and mixing regimes over conditions relevant to modern and next generation aero-engine combustors. Measurements of liquid and vapor penetration, mixing fields, combustion and emissions metrics (ignition delay, lift-off length, PAH formation, soot mass) highlighted the effects of fuels and combustor conditions. The experimental results are being leveraged to adjust and validate chemical and CFD models. Detailed analysis of sampled soot showed subtle differences in soot morphology between fuels. The results revealed the presence of contaminants potentially affecting surface chemistry and the nucleation propensity of water droplets on particles. Chemical mechanisms for NJFCP A-2, C-1 and C-4 showed good performance over a large parameter space. Spray breakup at relight conditions is vastly different from the atomization observed at high pressure. CFD simulations of the SHA target conditions confirmed the good behavior of the C-1 kinetic mechanism. The simulations support the strong relationship between low and high temperature reactions. New altitude chamber facility to enable detailed characterization of the heterogeneous nucleation process of water on aerosol particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Using Deep Learning to Develop a High Resolution Planetary Boundary Layer Model for Infrasound Propagation

Infrasound, with frequencies less than 20 Hz, is generated by both natural and anthropogenic sources. When one of these sources exerts a force on the atmosphere, infrasonic waves are generated. The propagation of these waves largely depends on temperature, wind speed, and wind direction. Previous work has used deep learning to accurately predict atmospheric specifications to altitudes of ~40 km. However, this model breaks down for local distances because it is too low resolution. Here we use a high-resolution meteorological dataset collected in Las Vegas, Nevada, USA to develop a deep learning model that can predict temperature, wind speed, and wind direction. Predictions are compared to ground truth observations to show that the model performs well at predicting temperature and wind direction but struggles with prediction wind speed. Model limitations and improvements are also discussed.

54 ENVIRONMENTAL SCIENCES↗

Method for Coupled Electromagnetic and Circuit Simulations to Evaluate Surge Arrester Performance in Protecting Equipment Against E1 HEMP

Surge arrester behavioral modeling for realistic systems embedded in an E1 high-altitude electromagnetic pulse environment inherently encompasses three interconnected complications: (1) the need to account for signal propagation across two domains, electromagnetics and electrical; (2) the need to include both linear and nonlinear circuit components in the analysis; and (3) the need to understand that the over-current and over-voltage mitigation performance is dependent not only on the properties of the surge arrester and protected load but also on the topology of the overall electrical network. This study presents a framework to address these challenges in a systematic manner to consider the effectiveness of protective measures for a common class of equipment in power generation facilities. Full-wave simulations were carried out to derive circuit-domain (i.e., lumped element–based) equivalent models for the excitation waveform and the physical components of the system. Then, these equivalent models were imported to a circuit solver and combined with a high-frequency surge arrester model to evaluate mitigation performance. The methodology outlined is general enough such that it can be applied for other electromagnetic interference problems that involve E2/E3 HEMP or microwave emissions.

42 ENGINEERING↗

Characterizing the effect of hypersonic boundary layer turbulence on antenna performance: A computational approach

The degradation of antenna performance during hypersonic re-entry is a well known phenomenon that can lead to complete radio blackout. Recent additions to the Empire code establish it as a tool for the study and analysis of the problem. Coupling to the Sandia Parallel Aerodynamics and Reentry Code (SPARC) enables the electromagnetic analysis of realistic re-entry plasma profiles. The geometric flexibility afforded by both Empire and SPARC allow the consideration of arbitrary vehicle and antenna configurations. We have used this tool to study antenna performance during re-entry when the boundary layer becomes turbulent. A concise description of line-of-sight transmissions, which employs advanced statistical methods, was developed. New insights into the low altitude reflectometer readings of RAM-C2 are offered. Techniques for the reconstruction of the re-entry plasma profile from reflectometer data were explored.

42 ENGINEERING↗