Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “zinc”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Thickness scaling and ferroelectric switching in wurtzite structure zinc magnesium oxide thin films

This study reports the thickness scaling of sputtered ferroelectric Zn 0.61 Mg 0.39 O (ZMO) thin films down to 43 nm. Encapsulated IrO 2 /ZMO/Ir capacitors exhibited switchable polarizations exceeding 50 μC cm −2 and coercive fields that increased from 3.9 to 4.4 MV cm −1 as the thickness decreased. Switching kinetics are best described by the simultaneous non-linear nucleation and the growth model. Bimodal switching is prevalent at low thicknesses, with the fastest switching times measured to be approximately 400 ns. Device encapsulation made ZMO switching kinetics more abrupt, potentially due to changes in the concentration of atmosphere-induced defects such as hydroxides. These results demonstrate stable ferroelectricity and sub-microsecond switching in sub-50 nm wurtzite ZMO, highlighting its potential as a low-voltage ferroelectric for integrated nonvolatile memory applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Zinc binding alters the conformational dynamics and drives the transport cycle of the cation diffusion facilitator YiiP

YiiP is a secondary transporter that couples Zn 2+ transport to the proton motive force. Structural studies of YiiP from prokaryotes and Znt8 from humans have revealed three different Zn 2+ sites and a conserved homodimeric architecture. These structures define the inward-facing and outward-facing states that characterize the archetypal alternating access mechanism of transport. To study the effects of Zn 2+ binding on the conformational transition, we use cryo-EM together with molecular dynamics simulation to compare structures of YiiP from Shewanella oneidensis in the presence and absence of Zn 2+ . To enable single-particle cryo-EM, we used a phage-display library to develop a Fab antibody fragment with high affinity for YiiP, thus producing a YiiP/Fab complex. To perform MD simulations, we developed a nonbonded dummy model for Zn 2+ and validated its performance with known Zn 2+ -binding proteins. Using these tools, we find that, in the presence of Zn 2+ , YiiP adopts an inward-facing conformation consistent with that previously seen in tubular crystals. After removal of Zn 2+ with high-affinity chelators, YiiP exhibits enhanced flexibility and adopts a novel conformation that appears to be intermediate between inward-facing and outward-facing states. This conformation involves closure of a hydrophobic gate that has been postulated to control access to the primary transport site. Comparison of several independent cryo-EM maps suggests that the transition from the inward-facing state is controlled by occupancy of a secondary Zn 2+ site at the cytoplasmic membrane interface. This work enhances our understanding of individual Zn 2+ binding sites and their role in the conformational dynamics that govern the transport cycle.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

One-dimensional twisted and tubular structures of zinc oxide by semiconductor-catalyzed vapor–liquid–solid synthesis

The exploration of unconventional catalysts for the vapor-liquid-solid synthesis of one-dimensional materials promises to yield new morphologies and functionality. Here, we show, for the model ZnO system, that unusual nanostructures can be produced via a semiconductor (Ge) catalyst. As well as the usual straight nanowires, we describe two other distinct morphologies: twisted nanowires and twisted nanotubes. The twisted nanotubes show large hollow cores and surprisingly high twisting rates, up to 9°/μm, that cannot be easily explained through the Eshelby twist model. A combination of ex situ and in situ transmission electron microscopy measurements suggest that the hollow core results from a competition between growth and etching at the Ge-ZnO interface during synthesis. The twisting rate is consistent with a softening of elastic rigidity. Finally, these results indicate that the use of unconventional, nonmetallic catalysts provides opportunities to synthesize unusual oxide nanostructures with potentially useful properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Experimental evidence that zinc impurities pin pair-density-wave order in La 2-x Ba x CuO 4

Both Zn doping and c-axis magnetic fields have been observed to increase the spin stripe order in La 2-x Ba x CuO 4 with x close to 1/8. For x = 0.095, the applied magnetic field also causes superconducting layers to decouple, presumably by favoring pair-density-wave order that consequently frustrates interlayer Josephson coupling. Here we show that introducing 1% Zn also leads to an initial onset of two-dimensional (2D) superconductivity, followed by 3D superconductivity at lower temperatures, even in zero field. Overall, we infer that the Zn pins pair-density-wave order locally, establishing the generality of such behavior.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Androgynous { 10 1 ¯ 2 } twin in zinc

Under ambient conditions, Zn is a hexagonal metal with a large c / a ratio of 1.856. Plastic deformation is predominantly accommodated by basal 〈 a 〉 slip and compression twins on the { 10 1 ¯ 2 } planes. Increasing hydrostatic pressure drastically reduces the c / a ratio of Zn and, when a critical threshold of c / a = 3 at about 10 GPa is crossed, the { 10 1 ¯ 2 } twins are predicted to change from compressive to tensile in nature. What happens at the transition point, when c / a = 3 , remains unknown. Here, we strain-cycle a textured polycrystalline sample of pure Zn at uniform hydrostatic pressures ranging between 2 and 17 GPa, over which the c / a ratio crosses the c / a = 3 compressive-tensile transition for { 10 1 ¯ 2 } twins. During deformation, the state of the sample is monitored through x-ray diffraction to extract texture and internal strain evolution. By comparing the experimental results with the predictions of an elastoviscoplastic polycrystal simulation, we confirm the androgynous nature of { 10 1 ¯ 2 } twin response at low and high pressures. When c / a = 3 , polycrystalline Zn does not display any evidence of twinning and its plastic behavior is controlled by mostly basal and pyramidal 〈 c + a 〉 slip activity, with a very small contribution of prismatic 〈 a 〉 slip. Evidence for the activity of other { 10 1 ¯ n } twinning modes, which have been suggested for Zn under high pressure, are not observed. Published by the American Physical Society 2024

Merkel, Sébastien (ORCID:000000032767581X)↗
DOE OSTI2023

Impact on aggregate/matrix bonding when a refractory contains zinc aluminate instead of spinel and magnesia‐chrome

The high hot strength of MgO–Cr 2 O 3 refractory is often ascribed to its intimate aggregate/matrix bonding. For a fundamental comparison with it, ~2 mm aggregates of MgO and Al 2 O 3 were separately embedded in ZnAl 2 O 4 and MgAl 2 O 4 matrices, sintered at 1600°C, and examined. It was found that similarity of thermal expansion coefficient (TEC) between the aggregate and the matrix is critical to achieve good bonding and this is more important than the extent of interdiffusion. The TEC mismatch of ≥ 5.7 × 10 -6 K -1 caused significant undesirable debonding in MgO aggregate/MgAl 2 O 4 matrix sample and MgO/ZnAl 2 O 4 despite >736 μm Zn 2+ diffusion depth in the latter. Direct bonding, as inferred from a thicker interfacial reaction layer and a greater shift of the aggregate/matrix interface before and after firing, was better in MgAl 2 O 4 /ZnAl 2 O 4 combination, followed by tabular Al 2 O 3 /ZnAl 2 O 4 and Al 2 O 3 /MgAl 2 O 4 . Powder X-ray diffraction indicated that the volatilization of ZnAl 2 O 4 at 1600°C in air was negligible compared to MgO–Cr 2 O 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2025

Zinc isotope constraints on the cycling of carbon in the Bermuda mantle source

Volatile recycling and storage in the mantle transition zone (MTZ) is important for the refertilization of the upper mantle and is associated with the generation of high-µ (HIMU, where µ is 238 U/ 204 Pb) mantle. One way to probe the MTZ and the processes associated with mantle convection is to sample lavas that originate from the shallow mantle and were contaminated by upwelling from the MTZ, such as at the previously proposed shallow plume of Bermuda. Here we present the first δ 66 Zn isotopic compositions of Bermuda silica-undersaturated and silica-saturated lavas to explore the origin of the carbon-rich lithologies and the genesis of the large seamount found in the western North Atlantic Ocean. Contrasting with global δ 66 Zn data sets, our results (δ 66 Zn between 0.24 ± 0.04 and 0.41 ± 0.04) do not support direct sampling of recycled marine carbonates in the Bermuda HIMU mantle. Instead, we show that δ 66 Zn fractionation toward higher values is associated with magmatic processes and incorporation of carbon sourced from deep fluids associated with the formation of carbonatites. These carbon-rich fluids are likely sourced from the metasomatic reactions between the subducted cold slab of the Iapetus oceanic lithosphere ca. 500 Ma and the thickened continental lithospheric mantle of Pangea. Melting of this metasomatized mantle was triggered by the arrival of the Farallon slab to the eastern North American margin in the late Cenozoic via shallow convection.

Mazza, Sarah E. [Smith College, Northampton, MA (U↗
DOE OSTI2020

Mechanistic Insights in Quinone-Based Zinc Batteries with Nonaqueous Electrolytes

Three quinone-based organic electrodes were tested in nonaqueous Zn-batteries using different salts and solvents. The Zn(TFSI)(2)/acetonitrile system exhibited the best performance due to its excellent transport and electrochemical properties. The mechanistic studies on the electrode kinetics were also carried out. While 2,5-dimethoxybenzoquinone (DMBQ) displayed a typical faradaic battery behavior, its polymeric derivatives showed a slow charge transfer inside the polymeric film as depicted by cyclic voltammograms. (C) 2020 The Electrochemical Society ("ECS"). Published on behalf of ECS by IOP Publishing Limited.

organic electrode, electrolyte, mechanism↗
DOE OSTI2025

Alkaline Zinc Passivation Mechanism is Controlled by Hydroxide Concentration

We studied Zn passivation and oxide growth in Zincate (Zn(OH) 4 2− ) in 4 and 8 M KOH solutions using an electrochemical quartz crystal microbalance (EQCM), building on our initial work at 1 M KOH where passivation was kinetically controlled. A porous passivating oxide spontaneously forms on Zn electrodes when KOH is above 4 M and saturated with zincate. However, passivation does not occur when bulk zincate concentration is decreased, resulting in continual Zn dissolution. EQCM data suggests that the passivation mechanism is strongly affected by pOH. Mass transport and kinetic processes in the 4 M KOH electrolytes couple and govern Zn passivation. At 8 M, KOH concentration shifts passivation to mass transport control. We explain this by the increased solubility of Zn(OH) 3 − with increasing pOH. The variation in the mechanism of passivation implications for how passivation is handled in Zn-alkaline batteries. The importance of controlling the mass transport increases with increased pOH, suggesting that electrode design, additives, and potential flow should be optimized. At lower pOHs, kinetics and mass transport must be balanced to manage passivation effectively. Additionally, the changing nature of the native oxide layer on the surface has implications for the evenness of deposition and dissolution on the Zn electrode.

Wittman, Reed M. [Oak Ridge National Laboratory (O↗