Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wind energy development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Solar wind contribution to the average population of energetic He(+) and He(++) ions in the Earth's magnetosphere

Measurements with the ion charge-energy-mass spectrometer CHEM on the AMPTE/CCE spacecraft were used to investigate the origin of energetic He(+) and He(++) ions observed in the equatorial plane at 3 less than or equal to L less than or equal to 9. Special emphasis was laid on the dependence of long-term average distributions on magnetic local time (MLT) and the geomagnetic activity index K(sup p). The observations are described in terms of the phase space densities f(sub 1) (for He(+)) and f(sub 2) (for He(++)). They confirm preliminary results from a previous study f(sub 1) is independent of MLT, whereas f(sub 2) is much larger on the nightside than on the dayside. They show, furthermore, that f(sub 1) increases slightly with K(sub p) on intermediate drift shells, but decreases on high drift shells (L greater than or equal to 7). f(sub 2) increases with K(sub p) on all drift shells outside the premidnight sector. Within this sector a decrease is observed on high drift shells. A simple ion tracing code was developed to determine how and from where the ions move into the region of observations. It provides ion trajectories as a function of the ion charge, the magnetic moment and K(sub p). The ion tracing enables a distinction between regions of closed drift orbits (ring current) and open convection trajectories (plasma sheet). It also indicates how the outer part of the observation region is connected to different parts of the more distant plasma sheet. Observations and tracing show that He(++) ions are effectively transported from the plasma sheet on convection trajectories. Their distribution in the observation region corresponds to the distribution of solar wind ions in the plasma sheet. Thus, energetic He(++) ions most likely originate in the solar wind. On the other hand, the plasma sheet is not an important source of energetic He(+) ions. Convection trajectories more likely constitute a sink for He(+) ions, which may diffuse onto them from closed drift orbits and then get lost through the magnetopause. An ionospheric origin of energetic He(+) ions is unlikely as well, since the source mechanism should be almost independent of K(sub p). There is considerable doubt, however, that a plausible mechanism also exists during quiet periods that can accelerate ions to ring current energies, while extracting them from the ionosphere. It is concluded, therefore, that energetic He(+) ions are mainly produced by charge exchange processes from He(++) ions. This means that most of the energetic He(+) ions constituting the average distributions also very likely originate in the solar wind. Additional ionospheric contributions are possible during disturbed periods.

Kremser, G.↗

Smart Process Planning for Automated Fiber Placement

Many industries, including aerospace, automotive, wind energy, maritime, and sporting goods, rely on strong, lightweight materials called composites. These materials are made by layering fibers, which can come in the form of narrow strips or wider sheets, and setting them in a polymer matrix. One of the most advanced ways to make these parts is through automated fiber placement, where a machine lays down the fibers in precise patterns. This method can create very efficient and strong designs, but it is complex, expensive, and often depends heavily on the experience of skilled engineers. Today, the design, manufacturing, and inspection stages of composite production are usually handled separately. This separation means that important information, such as how a part will be built or what defects might occur, is not always shared between stages. As a result, parts may not be as lightweight, strong, or defect-free as possible, and the process can take longer and cost more. This research develops a smart process planning system that connects design, manufacturing, and inspection into one continuous process. Built as software that works with existing tools, the system can automatically plan how the fibers are placed, predicting and reducing defects while improving both manufacturability and strength. The system optimizes not only individual layers but also how defects are distributed across all layers, preventing them from stacking up in ways that weaken the final part. It also uses inspection results from completed parts to improve future designs, creating a feedback loop where each stage informs the others. The system was tested by designing a composite panel using this new approach and comparing it to a panel made with state-of-the-art manual planning methods. The results showed that the system could intentionally control where defects appeared and increase the efficiency of the planning process. By unifying design, manufacturing, and inspection, this research shows a way to make advanced composite manufacturing more efficient, consistent, and cost-effective. This approach lowers the barrier to using automated fiber placement and opens the door for its wider adoption not only in aerospace but also in industries such as automotive, wind energy, maritime, and sporting goods, where strong and lightweight structures are essential.

Computer-Aided Process Planning↗

Study of Semi-Span Model Testing Techniques

An investigation has been conducted in the NASA Langley 14- by 22-Foot Subsonic Tunnel in order to further the development of semi-span testing capabilities. A twin engine, energy efficient transport (EET) model with a four-element wing in a takeoff configuration was used for this investigation. Initially a full span configuration was tested and force and moment data, wing and fuselage surface pressure data, and fuselage boundary layer measurements were obtained as a baseline data set. The semi-span configurations were then mounted on the wind tunnel floor, and the effects of fuselage standoff height and shape as well as the effects of the tunnel floor boundary layer height were investigated. The effectiveness of tangential blowing at the standoff/floor juncture as an active boundary-layer control technique was also studied. Results indicate that the semi-span configuration was more sensitive to variations in standoff height than to variations in floor boundary layer height. A standoff height equivalent to 30 percent of the fuselage radius resulted in better correlation with full span data than no standoff or the larger standoff configurations investigated. Undercut standoff leading edges or the use of tangential blowing in the standoff/ floor juncture improved correlation of semi-span data with full span data in the region of maximum lift coefficient.

Gatlin, Gregory M.↗

CIMI Simulations with Newly Developed Multiparameter Chorus and Plasmaspheric Hiss Wave Models

Numerical simulation studies of the Earth's radiation belts are important to understand the acceleration and loss of energetic electrons. The Comprehensive Inner Magnetosphere-Ionosphere (CIMI) model considers the effects of the ring current and plasmasphere on the radiation belts to obtain plausible results. The CIMI model incorporates pitch angle, energy, and cross diffusion of electrons, due to chorus and plasmaspheric hiss waves. These parameters are calculated using statistical wave distribution models of chorus and plasmaspheric hiss amplitudes. However, currently, these wave distribution models are based only on a single-parameter, geomagnetic index (AE) and could potentially underestimate the wave amplitudes. Here we incorporate recently developed multiparameter chorus and plasmaspheric hiss wave models based on geomagnetic index and solar wind parameters. We then perform CIMI simulations for two geomagnetic storms and compare the flux enhancement of megavolt electrons with data from the Van Allen Probes and Akebono satellites. We show that the relativistic electron fluxes calculated with multiparameter wave models resemble the observations more accurately than the relativistic electron fluxes calculated with single-parameter wave models. This indicates that wave models based on a combination of geomagnetic index and solar wind parameters are more effective as inputs to radiation belt models.

Aryan, Homayon↗

Fuel-conservative guidance system for powered-lift aircraft

A concept for automatic terminal-area guidance, comprising two modes of operation, has been developed and evaluated in flight tests. In the first or predictive mode, fuel-efficient approach trajectories are synthesized in fast time. In the second or tracking mode, the synthesized trajectories are reconstructed and tracked automatically. An energy rate performance model derived from the lift, drag, and propulsion-system characteristics of the aircraft is used in the synthesis algorithm. The method optimizes the trajectory for the initial aircraft position and wind and temperature profiles encountered during each landing approach. The paper describes the design theory and discusses the results of simulations and flight tests using the Augmentor Wing Jet STOL Research Aircraft.

Erzberger, H.↗

Boundary layer development on turbine airfoil suction surfaces

The results of a study supported by NASA under the Energy Efficient Engine Program, conducted to investigate the development of boundary layers under the influence of velocity distributions that simulate the suction sides of two state-of-the-art turbine airfoils, are presented. One velocity distribution represented a forward loaded airfoil ('squared-off' design), while the other represented an aft loaded airfoil ('aft loaded' design). These velocity distributions were simulated in a low-speed, high-aspect-ratio wind tunnel specifically designed for boundary layer investigations. It is intended that the detailed data presented in this paper be used to develop improved turbulence model suitable for application to turbine airfoil design.

Sharma, O. P.↗

Air-sea interaction with SSM/I and altimeter

A number of important developments in satellite remote sensing techniques have occurred recently which offer the possibility of studying over vast areas of the ocean the temporally evolving energy exchange between the ocean and the atmosphere. Commencing in spring of 1985, passive and active microwave sensors that can provide valuable data for scientific utilization will start to become operational on Department of Defense (DOD) missions. The passive microwave radiometer can be used to estimate surface wind speed, total air column humidity, and rain rate. The active radar, or altimeter, senses surface gravity wave height and surface wind speed.

Source record↗

Cloud streets during KonTur: A comparison of parallel/thermal instability modes with observations

Estimates of cloud street geometry produced by a model of the parallel/thermal instability modes of shallow convection are compared with observations obtained during the 1981 KonTur experiment. Good agreement between the modeled and observed orientation angles, wavelengths and Reynolds numbers are found when the streets are assumed to derive their energy from the average shear and the lowest order sine terms of a Fourier expansion of the mean wind profile (or equivalently from the lowest order cosine terms of the mean shear profile). The modes associated with the cosine terms of the wind profile (or the sine terms of the wind shear profile) do not agree well with the observations. These results suggest that the boundary layer rolls observed during KonTur might have developed owing to a combined parallel/thermal instability originating primarily from the cosine terms of the ambient roll parallel wind shear.

Shirer, H. N.↗

Cloud streets during KonTur - A comparison of parallel/thermal instability modes with observations

Estimates of cloud street geometry produced by a model of the parallel/thermal instability modes of shallow convection are compared with observations obtained during the 1981 KonTur experiment. Good agreement between the modeled and observed orientation angles, wavelengths and Reynolds numbers are found when the streets are assumed to derive their energy from the average shear and the lowest order sine terms of a Fourier expansion of the mean wind profile (or equivalently from the lowest order cosine terms of the mean shear profile). The modes associated with the cosine terms of the wind profile (or the sine terms of the wind shear profile) do not agree well with the observations. These results suggest that the boundary layer rolls observed during KonTur might have developed owing to a combined parallel/thermal instability originating primarily from the cosine terms of the ambient roll parallel wind shear.

Shirer, H. N.↗

An analysis of the high-latitude thermospheric wind pattern calculated by a thermospheric general circulation model. I - Momentum forcing

A diagnostic processor (DP) was developed for analysis of hydrodynamic and thermodynamic processes predicted by the NCAR thermospheric general circulation model (TGCM). The TGCM contains a history file on the projected wind, temperature and composition fields at each grid point for each hour of universal time. The DP assimilates the history file plus ion drag tensors and drift velocities, specific heats, coefficients of viscosity, and thermal conductivity and calculates the individual forcing terms for the momentum and energy equations for a given altitude. Sample momentum forcings were calculated for high latitudes in the presence of forcing by solar radiation and magnetospheric convection with a 60 kV cross-tail potential, i.e., conditions on Oct. 21, 1981. It was found that ion drag and pressure forces balance out at F region heights where ion drift velocities are small. The magnetic polar cap/auroral zone boundary featured the largest residual force or net acceleration. Diurnal oscillations were detected in the thermospheric convection, and geostrophic balance was dominant in the E layer.

Killeen, T. L.↗

A dynamic model for the time evolution of the modulated cosmic ray spectrum

A recently developed model predicts an energy dependent phase lag in the modulated cosmic ray density U(t) given by U(t) approximately equal to US (t - tau) where US is the solution to the Fokker-Planck equation under time independent conditions and tau is the average time spent by particles inside the modulating region. The delay times tau are functions of modulating parameters R (the radius of the modulating cavity), V (the solar wind velocity), and K (the effective average diffusion-coefficient which is a function of energy). This model is applied to predict the time evolution of the modulated cosmic ray proton spectrum over a simulated solar cycle. A modulation produced mostly by varying R over the solar cycle is less consistent with the observations.

Ogallagher, J. J.↗

A magnetohydrodynamic model for corotating interplanetary structures

A model is developed which treats interplanetary structures as a small-scale incompressible Alfvenic fluctuation superposed on a large-scale background flow, and uses the complete magnetohydrodynamic equations and the full energy equation to describe the interplanetary structures. For steady-state corotating structures the model assumes the background flow to be field aligned, and the nonlinear system is treated as being composed of two subsets: one dealing with the expansion of the solar wind in stream tubes, the other with the interaction between neighboring stream tubes. The expansion subset has a singularity at Parker's critical radius, and the interaction subset has a singularity at the Alfvenic point. Concerning the region where the flow velocity is super-Alfvenic, the characteristic equation is derived, and a general method of numerical solution for the three-dimensional problems based on the characteristics theory is discussed. In addition, a viscous WKB solution of the microscale system is presented.

Whang, Y. C.↗

The drive for Aircraft Energy Efficiency

NASA's Aircraft Energy Efficiency (ACEE) program, which began in 1976, has mounted a development effort in four major transport aircraft technology fields: laminar flow systems, advanced aerodynamics, flight controls, and composite structures. ACEE has explored two basic methods for achieving drag-reducing boundary layer laminarization: the use of suction through the wing structure (via slots or perforations) to remove boundary layer turbulence, and the encouragement of natural laminar flow maintenance through refined design practices. Wind tunnel tests have been conducted for wide bodied aircraft equipped with high aspect ratio supercritical wings and winglets. Maneuver load control and pitch-active stability augmentation control systems reduce fuel consumption by reducing the drag associated with high aircraft stability margins. Composite structures yield lighter airframes that in turn call for smaller wing and empennage areas, reducing induced drag for a given payload. In combination, all four areas of development are expected to yield a fuel consumption reduction of 40 percent.

James, R. L., Jr.↗

Modeling the effects of latitudinal gradients in stellar winds, with application to the solar wind

A steady, axisymmetric, quasi-radial, global model previously developed for stellar winds with embedded magnetic fields has been extended to include latitudinal gradient effects on the azimuthal velocity and magnetic field. The linear results at large radii are presented for large-amplitude latitudinal variations in the radial magnetic field, mass loss rate, and radial velocity of the wind. The magnetohydrodynamic (MHD) equations predict meridional flows that develop naturally from internal magnetic stresses. The flows open flux tubes in the star's equatorial plane, redistributing mass and magnetic flux as a function of stellar latitude. The plasma spins up to conserve angular momentum in fields and plasma. The results are generally applicable to stellar winds (including radiatively driven winds), provided that the internal structure is not dominated by rotation. The asymptotic solutions do not explicitly depend on the form of the energy equation, although the assumed O(1) state which drives these solutions depends on the deposition of energy and momentum throughout the wind.

Nerney, S.↗

Density and pressure variability in the mesosphere and thermosphere

In an effort to isolate the essential physics of the mesosphere and the thermosphere, a steady one-dimensional density and pressure model has been developed in support of related NASA activities, i.e., projects such as the AOTV and the Space Station. The model incorporates a zeroth order basic state including both the three-dimensional wind field and its associated shear structure, etc. A first order wave field is also incorporated in period bands ranging from about one second to one day. Both basic state and perturbation quantities satsify the combined constraints of mass, linear momentum and energy conservation on the midlatitude beta plane. A numerical (iterative) technique is used to solve for the vertical wind which is coupled to the density and pressure fields. The temperature structure from 1 to 1000 km and the lower boundary conditions are specified using the U.S. Standard Atmosphere 1976. Vertical winds are initialized at the top of the Planetary Boundary Layer using Ekman pumping values over flat terrain. The model also allows for the generation of waves during the geostrophic adjustment process and incorporates wave nonlinearity effects.

Davis, T. M.↗

Second International Symposium on Magnetic Suspension Technology, part 2

In order to examine the state of technology of all areas of magnetic suspension and to review related recent developments in sensors and controls approaches, superconducting magnet technology, and design/implementation practices, the 2nd International Symposium on Magnetic Suspension Technology was held at the Westin Hotel in Seattle, WA, on 11-13 Aug. 1993. The symposium included 18 technical sessions in which 44 papers were presented. The technical sessions covered the areas of bearings, bearing modelling, controls, vibration isolation, micromachines, superconductivity, wind tunnel magnetic suspension systems, magnetically levitated trains (MAGLEV), rotating machinery and energy storage, and applications. A list of attendees appears at the end of the document.

Groom, Nelson J.↗

Calculation of design load for the MOD-5A 7.3 mW wind turbine system

Design loads are presented for the General Electric MOD-SA wind turbine. The MOD-SA system consists of a 400 ft. diameter, upwind, two-bladed, teetered rotor connected to a 7.3 mW variable-speed generator. Fatigue loads are specified in the form of histograms for the 30 year life of the machine, while limit (or maximum) loads have been derived from transient dynamic analysis at critical operating conditions. Loads prediction was accomplished using state of the art aeroelastic analyses developed at General Electric. Features of the primary predictive tool - the Transient Rotor Analysis Code (TRAC) are described in the paper. Key to the load predictions are the following wind models: (1) yearly mean wind distribution; (2) mean wind variations during operation; (3) number of start/shutdown cycles; (4) spatially large gusts; and (5) spatially small gusts (local turbulence). The methods used to develop statistical distributions from load calculations represent an extension of procedures used in past wind programs and are believed to be a significant contribution to Wind Turbine Generator analysis. Test/theory correlations are presented to demonstrate code load predictive capability and to support the wind models used in the analysis. In addition MOD-5A loads are compared with those of existing machines. The MOD-5A design was performed by the General Electric Company, Advanced Energy Program Department, under Contract DEN3-153 with NASA Lewis Research Center and sponsored by the Department of Energy.

Mirandy, L.↗

Aerosol Wind Profiler (AWP) Doppler Wind Lidar Airborne Observations During the NOAA Joint Venture 3-D Wind Measurement Demonstration and NASA Active-Passive Profiling Experiment (APEX)

The NASA Langley Research Center (LaRC) has recently completed development of the Aerosol Wind Profiler (AWP) airborne Doppler wind lidar (DWL) instrument. AWP was supported by the NASA Earth Science Technology Office and the Earth Science Division, a project that adapted the Wind-Space Pathfinder (Wind-SP) DWL transceiver onto a structure for flight aboard a variety of NASA research aircraft. AWP demonstrates many technologies required for a space DWL mission, including a coherent-detection, optical heterodyne laser transmitter with high pulse energy (up to ~55 mJ) and repetition rate (200 Hz), electronic control of the beam path allowing for multiple viewing angles (allowing vector wind measurements) with no moving parts, compact highly-stable and tunable reference lasers allowing for high-precision measurement of velocity at long ranges while mitigating the impact of satellite platform velocity, and many others. AWP represents NASA’s only currently operational airborne 3-D wind profiling sensor. NASA LaRC was selected by the NOAA Joint Venture (JV) program to conduct a suborbital 3-D Wind measurement campaign demonstrate how data from a coherent-detection DWL like AWP could serve NOAA’s weather analysis and forecasting needs. The NOAA JV program is designed to work with the private sector, academia and other federal agencies to explore the feasibility and capability of emerging technologies spacecraft and other mission-specific tools to meet NOAA’s mission requirements. AWP was initially demonstrated on the NASA DC-8 within this JV program in October 2023, piggybacking on the NASA EcoDemonstrator mission focused on in-situ sampling of jet aircraft emissions and contrail formation from Everett, Washington. The in-situ sampling resulted in very frequent and rapid aircraft attitude changes which unfortunately degraded AWP data quality. But, during times with level flight and AVAPS dropsonde operations, AWP demonstrated excellent precision (< 2 m/s RMS) with high vertical (< 100 meter) resolution and 2 km spacing between profiles. AWP will be flown again on the NASA LaRC Gulfstream-3 from mid-September to mid-October 2024 out of Hampton, VA to complete the NOAA JV 3-D wind demonstration. Additional AWP flights will occur in early November from southern California during the NASA Active-Passive Profiling Experiment (APEX), focused on underflights of the NASA ER-2 equipped with many atmospheric profiling sensors. This presentation will summarize AWP measurements collected during these two fall 2024 flight campaigns, and how the AWP data compares with AVAPS dropsonde, NOAA weather prediction model, and GOES atmospheric motion vector data.

Kristopher Bedka↗