SEARCH · Engineering Papers

Results for “two-dimensional”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

Toward Large Field-of-view X-ray Spectrometers with Magnetic Microcalorimeters

A future X-ray telescope mission like Lynx, a X-ray flagship mission concept, requires a large field of view, high energy resolution, and high spatial resolution. The Magnetic Microcalorimeter (MMC) detectors we are developing for such a mission feature a 5-arcminute field of view, approximately 100,000 pixels, each spanning 0.5–1 arcsecond. These detectors require the readout of 8,000 sensors. Three different array types have been designed to meet scientific goals, two of which utilize thermal multiplexing to reduce the number of readout channels in a scheme called “Hydra.” We are currently fabricating detectors on a recently completed buried wiring wafer with connections to every sensor. The sensors are read out using a microwave multiplexer (μMUX) with flux ramp modulation. A single μMUX can read out approximately 1,000 sensors with only two feed lines. We will report on the test of the first two-dimensional μMUX chip, consisting of 78 resonators. μMUX chips that pass screening will be directly bonded to MMC array chips using indium bump bonding. In parallel, we have tested a kinetic inductance traveling wave parametric amplifier (KI-TWPA) to amplify signals at low temperatures. The KI-TWPA exhibits extremely low internal noise, approaching the standard quantum limit. Since the energy resolution of an MMC is primarily limited by the readout system, the KI-TWPA is an ideal amplifier for MMCs with μMUX readout. We recently measured the readout noise of a μMUX with a KI-TWPA, demonstrating its capability for reading out MMC arrays. We present the design and fabrication of the latest MMC detectors, along with its readout performance.

Magntic Microcalorimeters↗

DOE OSTI2026

Tensor renormalization group approach to the $O(2)$ models via symmetry-twisted partition functions

We investigate critical phenomena in the $O(2)$ models using symmetry-twisted partition functions that can be efficiently computed within the tensor renormalization group framework. We first demonstrate, taking the three-dimensional model as an example, that symmetry-twisted partition functions detect the spontaneous breaking of global continuous symmetry. We then consider the same model in two dimensions, where the Berezinskii--Kosterlitz--Thouless (BKT) transition occurs. Since symmetry-twisted partition functions directly provide the helicity modulus at a finite twist angle, we determine the BKT transition point. These results are presented based on Ref.~\cite{Akiyama:2026dzg}. Finally, in addition to the original paper~\cite{Akiyama:2026dzg}, we apply this approach to the two-dimensional generalized $O(2)$ model and confirm that it successfully identifies the phase transitions between the ferromagnetic and nematic phases, as well as between the nematic and paramagnetic phases.

Akiyama, Shinichiro [Tsukuba U., CCS; Tokyo U., IC↗

DOE OSTI2026

Measurement of the muon neutrino charged-current mesonless cross section in the NOvA near detector

NOvA is a long-baseline accelerator neutrino experiment at Fermilab. Its physics goals include precision neutrino oscillation measurements, neutrino interaction cross-section measurements and beyond Standard Model explorations. We present a measurement of muon neutrino charged-current cross section with zero mesons in the final state at the NOvA near detector. This measurement is performed as a function of the kinematics of the final state muon. Our chosen interaction channel is especially sensitive to quasielastic and meson exchange current interactions and it provides handles for constraining the cross section systematic uncertainties in oscillation analyses in present and future experiments. For particle identification, we use a convolutional neural network (CNN) trained on individual particles simulated in the NOvA Near detector. This allows us to select the desired signal while reducing the potential bias from neutrino interaction modeling. We study strategies for constraining the remaining charged-pion background via Michel electron information in a template fitting approach. The main experimental result is a two-dimensional differential cross section as a function of final-state muon kinetic energy and polar angle. The parameters of this measurement, including binning and unfolding, were optimized to reduce the expected systematic uncertainty in the total cross section. The final result shows good agreement with the main GENIE-based simulation framework that was independently fine-tuned in NOvA. We finally propose improvements and subsequent steps that build on this analysis and further dissect the final states of neutrino interactions. This work has been supported by US DOE grant DE-SC0015684.

Sánchez Falero, Sebastián Jesús [Iowa State U.]↗

DOE OSTI2026

Enhanced Ionization Charge Identification in the Short-Baseline Neutrino Program Neutrino Detectors with Deep Neural Networks

We present a deep neural net-based region of interest detection method (DNN ROI) for signal processing in the liquid argon time projection chambers of the Short-Baseline Neutrino (SBN) Program, SBND and ICARUS. DNN ROI addresses limitations of the traditional wire-by-wire thresholding algorithm by leveraging the full two-dimensional detector readout and cross-plane matching information. To account for detector performance variations, we explore training with augmented samples. We find that DNN ROI outperforms the traditional method in both low-level ROI identification performance and high-level reconstruction metrics for high-energy cosmic and accelerator neutrino interaction products, while also being more robust against detector variations, with or without sample augmentation.

Abratenko, P. [Tufts U.]↗

DOE OSTI2026

3D TRISO particle-explicit compact meshing

The TRI-structural ISOtropic (TRISO) layered fuel particle is a robust nuclear fuel form offering enhanced safety and performance for advanced reactor concepts, including high-temperature gas-cooled reactors and other Generation IV designs. These poppy-seed-sized particles are embedded in a graphite matrix to form fuel elements that must withstand elevated temperatures and high burn-up levels. The heterogeneous nature of these fuel elements — comprising thousands of randomly distributed TRISO particles — produces complex stress fields and thermal gradients that one- and two-dimensional models cannot accurately capture. While three-dimensional modeling has improved predictions of dimensional changes, internal pressure buildup, and fission product transport under irradiation, current approaches rely on homogenized material properties that are known to have considerable divergence from experimental observations. This work presents a methodology for optimized random packing of TRISO fuel compacts and full three-dimensional mesh generation within the BISON fuel performance code, with each particle coating layer individually discretized. The resulting mesh was demonstrated through heat conduction simulations under representative in-reactor operating conditions, showing strong agreement with expected behavior. This capability enables detailed analysis of particle-to-particle interactions, matrix cracking mechanisms, and the statistical distribution of coating layer failures — all of which directly govern fuel performance and safety margins.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2026

Optimal Hairpin Winding Configuration for EV Traction Motors to Enhance Active CMV Cancellation Capability of NPL.X Inverter

Active common-mode voltage (CMV) cancellation in neutral-point-less (NPL.X) inverter is an effective approach for reducing common-mode electromagnetic interference and alleviating voltage stress associated with high-speed switching in EV traction drives. However, the existing hairpin winding configuration often exhibits impedance imbalance due to slot leakage inductance and manufacturing constraints, limiting the effectiveness of active CMV cancellation. This paper investigates symmetric hairpin winding configurations for a dual-three-phase EV traction machine to improve impedance symmetry. Considering the manufacturing constraints of six-layer hairpin windings, four feasible symmetric winding configurations are analyzed. Two-dimensional finite-element analysis is performed to extract the impedance parameters of each configuration. The extracted impedance parameters are used to quantify the impedance mismatch between complementary phase pairs and evaluate its influence on active CMV cancellation. The results show that the fully interleaved winding configuration achieves perfectly balanced phase impedances with 0 % mismatch, whereas the mismatch in the other configurations ranges from approximately 2.4 % to 0.8 %. Consequently, the resulting total CMV overshoot is significantly suppressed to near zero voltage under high-voltage and high switching frequency operating conditions, demonstrating the importance of winding symmetry for maximizing the active CMV cancellation capability of the NPL.X inverter.

Lee, Kangbeen [Purdue Univ., West Lafayette, IN (U↗

DOE OSTI2026

Atmospheric Modeling and Denoising for Millimeter-Wave Line Intensity Mapping

Line-intensity mapping (LIM) offers a promising approach to mapping large-scale cosmic structure, and the greatest obstacle for ground-based observations at millimeter wavelengths is foreground contamination from atmospheric emission. In this work, we present a simulation and denoising framework designed to isolate and subtract atmospheric fluctuations from LIM data, modeled after the instrument parameters of the South Pole Telescope Summertime Line Intensity Mapper (SPT-SLIM). We generate mock observations spanning 125-175 GHz containing cosmic signals, precipitable water vapor screens, ice crystal fluctuations, and photon noise. We then implement a spatial-spectral atmospheric removal pipeline combining per-pixel linear template regression with a two-dimensional Fourier-domain filter. The framework is evaluated under simulated conditions in the South Pole and the Atacama Desert across three key metrics: cosmic signal preservation, foreground subtraction efficiency, and instrument noise injection. Our pipeline achieves atmospheric suppression at large spatial scales, and these results establish a physically grounded foundation for atmosphere removal in ground-based LIM data collection.

Saye, L. K. [UC, Berkeley (main)] (ORCID:000900078↗

DOE OSTI2026

Longitudinal Phase Space Tomography for the Booster Synchrotron

Efforts in the study of the longitudinal behavior of charged particles in the Fermilab Booster can be catalyzed with an image of the two-dimensional phase space distribution. In the past, tomography had been employed in the reconstruction of the phase space in accelerators such as the Recycler at Fermilab and the Proton Synchrotron Booster at CERN. However, such a capability had yet to realize for the Fermilab Booster synchrotron. In this work, the first successful tomographic phase space reconstruction of a low-energy Booster bunch is presented along with validation metrics. A numerical turn-by-turn model of the longitudinal particle dynamics in the Booster has been implemented, which utilizes a fast, map-based particle transport algorithm. Using a sinogram generated from the Wall Current Monitor signal, the iterative reconstruction algorithm recovers a discretized image of the original phase space distribution at variable resolution. The reconstruction result shows low root-mean-square error and a rapid convergence toward the solution, providing strong evidence of accuracy. Future and ongoing work includes modeling high-energy bunches above transition and using tomography to infer certain machine parameters such as synchronous phase, peak gap voltage, and synchronous energy in addition to the phase space distribution.

Ebeid, Safi [Unlisted; Fermilab]↗

DOE OSTI2026

Exact Fock-State Preparation with $n^{1/4}$ Circuit Depth

Efficient, deterministic, and high-fidelity preparation of large Fock states is essential for scaling bosonic quantum technologies and exploring quantum phenomena at large excitation energies. We introduce a deterministic one-parameter (D1p) protocol that maps Fock-state preparation in an infinite-dimensional Hilbert space onto two-dimensional amplitude amplification. Starting from a coherent state with $|α|\simeq\sqrt{n}$, the initial target-state population scales as $n^{-1/2}$, yielding an iteration count and circuit depth of $\mathcal{O}(n^{1/4})$. Phase matching guarantees unit fidelity in the ideal model; remarkably, preparing $|{10^6}\rangle$ requires only 39 iterations. The protocol uses only displacements and number-selective phase operations, requires no numerical optimization, and further extends to state transfer, general superpositions, finite-dimensional systems, and multipartite entangled states. In the large-amplitude regime, its multi-target form prepares $L$-legged cat states with an iteration count determined only by $L$; cats with up to ten legs require only two iterations, independent of the coherent-state amplitude. This framework provides a broadly applicable route to highly excited bosonic states on platforms supporting these elementary controls.

Roy, Tanay [Fermilab] (ORCID:000000019442862X)↗

DOE OSTI2026

Machine Learning an Ab-Initio Based Bond-Order Potential for Bismuthene

Bismuthene is a heavy 2D material whose strong spin–orbit coupling and recently observed single-element ferroelectricity have intensified interest in its structural, vibrational, and transport properties. Accurate modeling of these behaviors requires a short-range interatomic potential that can reproduce the underlying bonding physics at a fraction of the computational cost of first-principles methods. However, such a potential is currently unavailable. Here, in this work, we construct a Tersoff bond-order potential for β-bismuthene using a reinforcement-learning framework that integrates a continuous Monte Carlo Tree Search with a simplex-based local optimizer. The optimized parameter sets reproduce first-principles lattice constants, cohesive energy, the equation of state, elastic constants, and phonon dispersion. We validate the models by performing thermal-conductivity calculations and uniaxial fracture simulations our findings confirm the reliability of the resulting models across multiple thermomechanical regimes. Comparison of the three best solutions reveals how differences in pairwise interactions, angular terms, and bond-order behavior govern phonon features and mechanical responses. We demonstrate an interpretable and computationally efficient potential for bismuthene and demonstrate a general reinforcement-learning strategy for developing bond-order models in emerging 2D materials.

deformation↗

DOE OSTI2026

Subterahertz Spin Relaxation Dynamics of Boron-Vacancy Centers in Hexagonal Boron Nitride

Quantum sensors based on spin defects have become powerful tools for detecting faint magnetic signals, yet their operation remains confined to low magnetic fields and gigahertz frequencies. Extending such sensors into high-field (>0.3 T) and subterahertz regimes would enable quantum metrology across a wide range of electromagnetic phenomena and scientific applications, but has proven challenging. Here, we demonstrate that negatively charged boron vacancies ($V^−_B$) in hexagonal boron nitride can function as relaxation-based quantum sensors operating up to 0.2 terahertz and 7 T fields. Their uniform spin-orientation and persistent spin-contrast at high fields enable measurement of intrinsic spin relaxation across unexplored field regimes. We reveal a crossover in relaxation behavior, initially decreasing at low fields before rising at higher fields, consistent with the emergence of single-phonon-induced resonant noise at subterahertz frequencies. These results establish $V^−_B$ centers as a versatile platform for quantum sensing in the subterahertz, high-field regime.

boron-vacancies↗

DOE OSTI2026

i -Wave Symmetry Altermagnetism and Anomalous Hall Conductivity in Monolayer FeCl 3

In this work, the FeCl 3 monolayer is proposed to host a rare and exotic i -wave symmetry altermagnetism. Using first-principles calculations, we performed a detailed investigation of the structural stability and electronic, magnetic, and spintronic properties of monolayer FeCl 3 . Our results suggest the system is semiconducting in nature and exhibits i-wave symmetry nonrelativistic spin splitting (NRSS), originating from its hexagonal crystal structure with roto-inversion symmetries and anisotropic crystal field. The momentum-resolved spin-splitting further supports the presence of spin-dependent topological features. Further, the monolayer exhibits sizable conventional spin-Hall and anomalous Hall conductivities, highlighting its promise as a versatile platform for next-generation flexo-spintronic applications.

altermagnetism↗

DOE OSTI2026

Influence of Disorder on the Electronic Properties and Magnetotransport of Ti 3 C 2 T x Single-Flake Devices

The exploration of MXenes for electronic applications is a rapidly growing field in materials science. However, most research has focused on MXene films, with only a limited number of studies addressing the characterization of single-flake devices. In this work, we investigate the electronic and magnetotransport properties of Ti 3 C 2 T x single-flake devices, exploring the influence of structural defectivity on their transport mechanisms. We show that negative magnetoresistance present at low temperatures in single flake samples arises from weak localization, which we analyze to extract the phase coherence length of single-layer and multi-layer flakes. The study of magnetoresistance for this metallic MXene shows that the material exhibits quantum transport phenomena when intrinsic electronic behavior dominates. Moreover, by increasing the defect density via thermal annealing in ultrahigh vacuum, we uncover and characterize the metal-to-disordered metal transition in Ti 3 C 2 T x , shedding light on new properties and enriching fundamental knowledge about MXenes.

MXenes↗

DOE OSTI2026

Nanohybrid of Cu2O-Ti3C2Tx as a Silver-Free MXene Sorbent for Iodine Gas Capture from Nuclear Waste

The capture of volatile radioiodine from nuclear fuel reprocessing off-gas streams remains a critical challenge due to the high volatility, long half-life of 129I, and biological uptake of iodide from the environment. Although silver-based sorbents provide strong iodine chemisorption, their high cost and regulatory classification as mixed radioactive-hazardous waste motivate the development of alternative materials. Here, we report a silver-free Cu2O-Ti3C2Tx MXene hybrid for iodine gas capture at 150 °C. Structural and compositional analyses confirm the formation of Cu2O nanoparticles on Ti3C2Tx nanosheets and their subsequent conversion to thermodynamically stable CuI upon static iodine gas exposure, achieving an iodine mass loading of up to 1115 mg/g. These results demonstrate the potential of Cu2O-Ti3C2Tx MXene as a copper-based alternative to silver sorbents for elevated-temperature iodine gas capture.

iodine gas capture↗

DOE OSTI2025

Tailoring MoS 2 for Small-Molecule Electroreduction: The Role of Metal Doping and Heterostructures

The electrification of chemical transformations central to sustainable fuel production and waste valorization, such as overall water splitting (OWS), hydrogen evolution reaction (HER), and electrochemical reduction of CO 2 (CO 2 R), presents a powerful opportunity to advance carbon-neutral energy technologies. Transition metal dichalcogenides (TMDs), particularly MoS 2 , have emerged as promising electrocatalyst candidates, owing to their abundance, tunable active sites, and defect-rich structures. This review highlights recent progress in leveraging metal doping and heterostructure engineering of MoS 2 to enhance the electrocatalytic activity and selectivity. By compiling insights from experimental studies and density functional theory (DFT) predictions, we examine how defect creation, electronic structure modification, and interface design contribute to improved charge transport and catalytic efficiency. Particular emphasis is placed on rational design principles, synthetic strategies, and operando characterization methods that provide a pathway to understanding and optimizing MoS 2 -based materials. We also discuss the challenges of stability, mechanistic ambiguity, and scaling while outlining opportunities to bridge theory and experiment. Collectively, this review underscores how defect and heterostructure engineering of MoS 2 can accelerate the development of efficient, sustainable electrocatalysts for both fuel generation and waste-to-value generation.

CO2 reduction↗

DOE OSTI2025

Local microwave sensing of excitons and their electrical environment

Excitons in atomically thin transition metal dichalcogenides (TMDs) possess intriguing optical properties, drawing interest for both technology and fundamental research. However, as the demands for nanodevice applications and the exploration of fundamental physics push toward smaller, subwavelength scales, studying them locally is challenging. In this work, we introduce a cryogenic scanning probe photoelectrical sensing technique, termed exciton-resonant microwave impedance microscopy (ER-MIM), to measure the excitonic responses in a monolayer MoSe 2 device at 1.5K. From the microwave signal changes, we identify exciton polarons and their Rydberg states. Building on these observations, we systemically reveal the local and nonlocal effects of carrier density, inhomogeneous electric fields, as well as dielectric screening on excitons, beyond the reach of conventional probes. By further integrating deep learning techniques, we precisely extracted the electrical parameters surrounding excitons, demonstrating a quantified, exciton-assisted nanoscale electrometry. Our results provide new insight into exciton-environment interactions, establish ER-MIM as a powerful optoelectronic sensing platform, and open avenues for exciton-based quantum control and device technologies.

scanning probe microscopy↗

DOE OSTI2025

Moiré-controllable exciton localization and dynamics through spatially-modulated inter- and intralayer excitons in a MoSe 2 /WS 2 heterobilayer

Moiré heterobilayers exhibiting spatially varying exciton localization that can be precisely controlled through the twist angle have emerged as exciting platforms for studying complex quantum phenomena. Here, we study the exciton landscape in MoSe 2 /WS 2 heterobilayers through synergistic first-principles GW plus Bethe Salpeter equation (GW-BSE) calculations and complementary time- and angle-resolved photoemission spectroscopy (tr-ARPES). We find that the MoSe 2 /WS 2 heterobilayer has a type I band alignment at large twist angles. In contrast, at small twist angles, there exist simultaneous spatially modulated regions of local type I band alignment, hosting bright intralayer excitons, and local type II band alignment, hosting long-lived interlayer excitons, due to lattice reconstruction in different high-symmetry regions. In tr-ARPES this manifests in the observation of long-lived excitons with electron population in only MoSe 2 at large twist angles, while in samples with small twist angles, signals from two distinct long-lived exciton states with electron population in both layers are observed. Contrary to earlier studies, we find no excitonic hybridization near the low-energy absorption peaks in MoSe 2 /WS 2 , whose splitting can, instead, be explained by the lattice reconstruction.

Electronic properties and materials↗

DOE OSTI2026

Purcell enhancement of directional edge photocurrent in a van der Waals self-cavity

Cavities provide a means to manipulate the optical and electronic responses of quantum materials by selectively enhancing light-matter interaction at specific frequencies and momenta. While cavities typically involve external structures, exfoliated flakes of van der Waals (vdW) materials can form intrinsic self-cavities due to their small finite dimensions, confining electromagnetic fields into plasmonic cavity modes, characterized by standing-wave current distributions. While cavity-enhanced phenomena are well-studied at optical frequencies, the impact of self-cavities on nonlinear electronic responses—such as directional photocurrent—remains largely unexplored, particularly in the terahertz regime, critical for emerging ultrafast optoelectronic technologies. Here, we report a self-cavity-induced Purcell enhancement of directional photocurrents in the vdW semimetal WTe 2 . Using ultrafast optoelectronic circuitry, we measured coherent near-field THz emission resulting from nonlinear photocurrents excited at the sample edges. We observed enhanced emission at finite frequencies, tunable via excitation fluence and sample geometry, which we attribute to plasmonic interference effects controlled by the cavity boundaries. We developed an analytical theory that captures the cavity resonance conditions and spectral response across multiple devices. Our findings establish WTe 2 as a bias-free, geometry-tunable THz emitter and demonstrate the potential of self-cavity engineering for controlling nonlinear, nonequilibrium dynamics in quantum materials.

condensed-matter physics↗