Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transport models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Effect of leading-edge contour and vertical-tail configuration on the low-speed stability characteristics of a supersonic transport model having a highly-swept arrow wing

A low-speed investigation was made on a highly-swept arrow-wing model to determine the effect of wing leading-edge contour and vertical-tail configuration on the aerodynamic characteristics in pitch and sideslip. The investigation was made with the trailing-edge flaps deflected over a range of angles of attack from 8 deg to 32 deg. The tests were made at a Mach number of 0.13, which corresponds to a Reynolds number of about 3,000,000 based on the wing reference chord.

Lockwood, V. E.↗
NASA NTRS1978

Turbulent transport model of wind shear in thunderstorm gust fronts and warm fronts

A model of turbulent flow in the atmospheric boundary layer was used to simulate the low-level wind and turbulence profiles associated with both local thunderstorm gust fronts and synoptic-scale warm fronts. Dimensional analyses of both type fronts provided the physical scaling necessary to permit normalized simulations to represent fronts for any temperature jump. The sensitivity of the thunderstorm gust front to five different dimensionless parameters as well as a change from axisymmetric to planar geometry was examined. The sensitivity of the warm front to variations in the Rossby number was examined. Results of the simulations are discussed in terms of the conditions which lead to wind shears which are likely to be most hazardous for aircraft operations.

Lewellen, W. S.↗
NASA NTRS1977

Turbulent transport model of a thunderstorm gust front

A second-order closure turbulent model is adopted to predict complex fluid flows; few a priori assumptions about the internal turbulent and mean flow structures are required. The flow simulations are applied to the analysis of local gust fronts generated by rain-cooled outflows from severe thunderstorms. Results of the simulations provide a means for discussing the behavior of an aircraft passing through a thunderstorm-related downdraft.

Teske, M. E.↗
NASA NTRS1977

Hyper-ballistic transport models of Copernican ejecta

As the ejecta curtain sweeps outward from the crater which forms after meteorite impact, fine particles may receive a hyperballistic boost from the expanding gas cloud created by vaporization. In modeling the phenomenon, this paper considers both spatial and frequency variations of the particle size parameter. Two models which preserve spatial homogeneity within the elliptical transient crater serve to test the effects of different particle-frequency distributions. Three models which feature identical spatial nonhomogeneity of particle sizes serve to test different crater-formation rates. From 1 to 6% of the total ejected mass is sent beyond the maximum ballistic range of 437 km, according to the five models, each of which is a possible simulation of the lunar crater Copernicus.

Rehfuss, D. E.↗
NASA NTRS1979

Effects of a military cargo pod and tail fins on the aerodynamic characteristics of a large wide-body transport model

Wind tunnel tests were conducted on a 0.03 scale model of a large wide-body commercial aircraft to determine the effects on the static aerodynamic characteristics resulting from the attachment of a belly pod for the long-range deployment of outsize military equipment. The effectiveness of horizontal-tip fins in augmenting directional stability was investigated. At a test Reynolds number of 1.08 x 1,000,000, the addition of the pod results in an increase in total drag of approximately 20 percent. Trim drag due to the pod is very small. Although the pod produces a significant decrease in directional stability, the addition of the tip fins restores some of the stability, particularly at the lower angles of attack.

Jernell, L. S.↗
NASA NTRS1979

Multiple-time-scale concepts in turbulent transport modelling

The paper reports progress in developing a closure employing two or more independently calculated time scales with which to characterize the rates of progress of different turbulent interactions. The approach contrasts with that used by earlier single-point models which adopt just a single time scale, proportional to the turbulence energy turnover time. The present treatment divides the energy containing part of the spectrum into two regions which respond at different rates and in different ways to changes in the environment. Computational results are reported for several thin shear flows which show striking improvement in the level of agreement with experiment over that obtained with models employing only one time scale.

Hanjalic, K.↗
NASA NTRS1980

Multiple-Time-Scale Concepts in Turbulent Transport Modeling

Progress in developing a turbulence closure employing two or more independently calculated time scales with which to characterize the rates of progress of different turbulent interactions is reported. The energy containing part of the spectrum is divided into two regions which respond at different rates and in different ways to changes in the environment. The scheme may be regarded as providing an intermediate level of approximation between the relatively simple, but fallible, single-point closures and the vastly more elaborate two-point closures which have so far been applied only to simulating homogeneous flows. The proposed approach requires only slightly more computational effort than single-scale schemes. Computational results are reported for several thin shear flows which show striking improvement in the level of agreement with experiment over that obtained with models employing only one time scale.

Hanjalic, K.↗
NASA NTRS1982

Turbulent transport modeling of shear flows around an aerodynamic wing. Development of turbulent near-wall model and its application to recirculating flows

Progress in implementing and refining two near-wall turbulence models in which the near-wall region is divided into either two or three zones is outlined. These models were successfully applied to the computation of recirculating flows. The research was further extended to obtaining experimental results of two different recirculating flow conditions in order to check the validity of the present models. Two different experimental apparatuses were set up: axisymmetric turbulent impinging jets on a flat plate, and turbulent flows in a circular pipe with a abrupt pipe expansion. It is shown that generally better results are obtained by using the present near-wall models, and among the models the three-zone model is superior to the two-zone model.

Amano, R. S.↗
NASA NTRS1982

Experimental trim drag values and flow-field measurements for a wide-body transport model with conventional and supercritical wings

The purpose of this study was to determine if advanced supercritical wings incur higher trim drag values at cruise conditions than current wide body technology wings. Relative trim drag increments were measured in an experimental wind tunnel investigation conducted in the Langley 8 Foot Transonic Pressure Tunnel. The tests utilized a high aspect ratio supercritical wing and a wide body aircraft wing, in conjunction with five different horizontal tail configurations, mounted on a representative wide body fuselage. The three low tail and two T-tail configurations were designed to measure the effects of horizontal tail size, location, and camber on the trim drag increments for the two wings. Longitudinal force and moment data were taken at a Mach number of 0.82 and design cruise lift coefficients for the wide body and supercritical wings of 0.45 and 0.55, respectively. The data indicate that the supercritical wing does not have significantly higher trim drag than the wide body wing. A reduction in tail size, combined with relaxed static stability, produced trim drag reductions for both wings. The cambered tails had higher trim drag increments than the symmetrical tails for both wings, and the T-tail configurations had lower trim drag increments than the low tail configurations.

Jacobs, P. F.↗
NASA NTRS1986

Transport model of nucleon-nucleus reaction

A simplified model of nucleon-nucleus reaction is developed and some of its properties are examined. Comparisons with proton production measured for targets of Al-27, Ni-58, Zr-90, and Bi-209 show some hope for developing an accurate model for these complex reactions. It is suggested that binding effects are the next step required for further development.

Wilson, J. W.↗
NASA NTRS1990

A one-equation turbulence transport model for high Reynolds number wall-bounded flows

A one-equation turbulence model that avoids the need for an algebraic length scale is derived from a simplified form of the standard k-epsilon model equations. After calibration based on well established properties of the flow over a flat plate, predictions of several other flows are compared with experiment. The preliminary results presented indicate that the model has predictive and numerical properties of sufficient interest to merit further investigation and refinement. The one-equation model is also analyzed numerically and robust solution methods are presented.

Baldwin, Barrett S.↗
NASA NTRS1991

A one-equation turbulence transport model for high Reynolds number wall-bounded flows

A one-equation turbulence model that avoids the need for an algebraic length scale is derived from a simplified form of the standard-k-epsilon model equations. After calibration based on well established properties of the flow over a flat plate, predictions of several other flows are compared with experiment. The preliminary results presented indicate that the model has predictive and numerical properties of sufficient interest to merit further investigation and refinement. The one-equation model is also analyzed numerically and robust solution methods are presented.

Baldwin, Barrett S.↗
NASA NTRS1992

AMTEC system performance studies using the detailed electrode kinetic and transport model

A detailed electrochemical model of the alkali metal thermoelectric converter (AMTEC) electrode and current collector grid has been developed recently. Comparative evaluations of the resulting differences in model predictions reveal that the new detailed model predicts up to 50 percent higher electrode power densities at condenser operating temperatures above 600 K. The new model, with experimentally determined parameters, was used to recalculate the projected system performance of previously reported 1- and 100-kWe AMTEC space power systems that had incorporated earlier electrolyte/electrode models. It was found that when the detailed model was used to determine the electrode power densities, enhanced specific power and efficiencies are predicted.

Sievers, Robert K.↗
NASA NTRS1994

Simulations of isoprene: Ozone reactions for a general circulation/chemical transport model

A parameterized reaction mechanism has been created to examine the interactions between isoprene and other tropospheric gas-phase chemicals. Tests of the parameterization have shown that its results match those of a more complex reaction set to a high degree of accuracy. Comparisons between test runs have shown that the presence of isoprene at the start of a six day interval can enhance later ozone concentrations by as much as twenty-nine percent. The test cases used no input fluxes beyond the initial time, implying that a single input of a biogenic hydrocarbon to an airmass can alter its ozone chemistry over a time scale on the order of a week.

Makar, P. A.↗
NASA NTRS1994

Mantle rare gas relative abundances in a steady-state mass transport model

A model for He and Xe was presented previously which incorporates mass transfer of rare gases from an undegassed lower mantle (P) and the atmosphere into a degassed upper mantle (D). We extend the model to include Ne and Ar. Model constraints on rare gas relative abundances within P are derived. Discussions of terrestrial volatile acquisition have focused on the rare gas abundance pattern of the atmosphere relative to meteoritic components, and the pattern of rare gases still trapped in the Ear,th is important in identifying volatile capture and loss processes operating during Earth formation. The assumptions and principles of the model are discussed in Wasserburg and Porcelli (this volume). For P, the concentrations in P of the decay/nuclear products 4 He, 21 Ne, 40 Ar, and 136 Xe can be calculated from the concentrations of the parent elements U, Th, K, and Pu. The total concentration of the daughter element in P is proportional to the isotopic shifts in P. For Ar, ((40)Ar/(36)Ar)p - ((40)Ar/(36)Ar)o =Delta (exp 40) p= 40 Cp/(exp 36)C where(i)C(sub j) the concentration of isotope i in j. In D, isotope compositions are the result of mixing rare gases from P, decay/nuclear products generated in the upper mantle, and subducted rare gases (for Ar and Xe).

Porcelli, D.↗
NASA NTRS2001

2D Quantum Transport Modeling in Nanoscale MOSFETs

We have developed physical approximations and computer code capable of realistically simulating 2-D nanoscale transistors, using the non-equilibrium Green's function (NEGF) method. This is the most accurate full quantum model yet applied to 2-D device simulation. Open boundary conditions, oxide tunneling and phase-breaking scattering are treated on an equal footing. Electron bandstructure is treated within the anisotropic effective mass approximation. We present the results of our simulations of MIT 25 and 90 nm "well-tempered" MOSFETs and compare them to those of classical and quantum corrected models. The important feature of quantum model is smaller slope of Id-Vg curve and consequently higher threshold voltage. These results are consistent with 1D Schroedinger-Poisson calculations. The effect of gate length on gate-oxide leakage and subthreshold current has been studied. The shorter gate length device has an order of magnitude smaller leakage current than the longer gate length device without a significant trade-off in on-current.

Svizhenko, Alexei↗