Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transient event”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

An RTDS-Based Testbed for Investigating the Impacts of Transmission-Level Disturbances on Solar PV Operation

The increasing penetration of renewable energy resources such as solar and wind via power electronic inverters is challenging grid dynamics, as well as grid planning, operation, and protection. Recently, the North American Electric Reliability Corporation (NERC) has reported a series of similar events of the unintended loss of solar generation in Southern California over a large geographic area following the transmission-level disturbances. These events highlight the importance of understanding the characteristics of the transmission-side disturbances propagating into the distribution systems and their impacts on the operation of inverter-based resources. In this paper, a real-time electromagnetic simulation testbed is constructed for real-time electromagnetic simulations to generate realistic transmission-level disturbances and investigate their impacts on the solar PV operation under different fault types and locations, solar penetration levels, and loading levels. Through the simulation analysis and grid strength assessment, it is found that the grid strength at points of integration (POIs) of solar PVs significantly affects the transient stability of solar generators. Particularly, undesirable transient stability events are more likely to occur at the weak POIs following the transmission-level disturbances. Moreover, undesirable transient stability events become severer when the transmission-level disturbance is closer to the weak POIs or the disturbances become more serious. Additionally, the impact of the transmission-level disturbances on the solar PVs at the weak POIs exacerbate with the increasing solar penetration levels and loading levels. Thus, it is important to study and develop new technologies for grid planning, operation, and protection in weak grid conditions to address the emerging issues of integrating the high penetration of solar PVs and other IBRs.

14 SOLAR ENERGY↗
NASA NTRS1991

The ionospheric signature of flux transfer events

The effects at ionospheric heights which take place when transient reconnection events (i.e., Flux Tranfer Events (FTEs)) occur at the dayside magnetopause are considered. The nature of the FTE related ionospheric flows, the associated current systems, and the plasma precipitation, are discussed. In particular, the nature of the time dependent cusp precipitation which occurs on this case is outlined and expectations are compared with those based on steady magnetopause reconnection.

Cowley, S. W. H.↗
DOE OSTI2025

Transient plasma-detachment events induced by multiple gas puffs in ADITYA-U tokamak

Application of periodic short bursts of gas leads to periodic separation of the plasma column edge from the limiter in the Ohmically heated discharges of ADITYA-U tokamak. After every gas-puff, injecting around 10 17 –10 18 m −3 molecules of fuel gas in the edge of the plasma column, a significant reduction in plasma density, temperature, H α emission intensity and an increase in the H β /H α ratio is observed in the vicinity of the limiter radius for a certain time duration before these parameters regain their pre-gas puff values. A decline in the ion-flux to the limiter is also observed simultaneously. The global confinement of plasma also increases after each gas-puff. These observations, which repeat after each gas-injection, imply that the plasma–neutral interaction occurs further away from the limiters after the gas-injection and indicate a periodic plasma separation from the limiter surface. Further investigation revealed that the gas-injection modifies the radial and toroidal electric field, which may be playing a role in the separation of the plasma column from the limiter surface. It was further demonstrated by an electrode bias experiment in the absence of gas-injection that an application of an external radial electric field can result in obtaining a separated plasma state.

Physics - Plasma physics↗
DOE OSTI2021

Using Demanded Power and RDE Aggressiveness Metrics to Analyze the Impact of CACC Aggressiveness on Heavy Duty Platooning Power Consumption

Presently, a main mobility sector objective is to reduce its impact on the global greenhouse gas emissions. While there are many techniques being explored, a promising approach to improve fuel economy is to reduce the required energy by using slipstream effects. This study analyzes the demanded engine power and mechanical energy used by heavy-duty trucks during platooning and non-platooning operation to determine the aerodynamic benefits of the slipstream. A series of platooning tests utilizing class 8 semi-trucks platooning via Cooperative Adaptive Cruise Control (CACC) are performed. Comparing the demanded engine power and mechanical energy used reveals the benefits of platooning on the aerodynamic drag while disregarding any potential negative side effects on the engine. However, energy savings were lower than expected in some cases. It was hypothesized that the CACC may have amplified transient platooning events relative to the individual truck baseline results, hampering the potential energy savings. Therefore, the impact of the controller on the observed driving style was analyzed in detail. In order to quantify the transient operational characteristics of the experimental trials, metrics from the European Real Driving Emissions (RDE) legislation were modified to serve as metrics of aggressiveness during platooning. The metrics (v · apos)95 and Relative Positive Acceleration (RPA) were calculated for platooning and non-platooning runs. These results indicate that the CACC induces small acceleration events during platooning to retain the commanded longitudinal separation between vehicles. These small acceleration events increase following vehicle aggressiveness during platooning and prevent the following vehicles from obtaining maximum energy savings. Moreover, a correlation between the RDE metric (v · apos)95 and energy savings is developed. Hence, this work establishes the ability of RDE metrics to assess CACC impacts on platoon energy savings.

European Real Driving Emissions, RDE, greenhouse g↗
DOE OSTI2020

Device-Level Multidimensional Thermal Dynamics With Implications for Current and Future Wide Bandgap Electronics

Researchers have been extensively studying wide-bandgap (WBG) semiconductor materials such as gallium nitride (GaN) with an aim to accomplish an improvement in size, weight, and power of power electronics beyond current devices based on silicon (Si). However, the increased operating power densities and reduced areal footprints of WBG device technologies result in significant levels of self-heating that can ultimately restrict device operation through performance degradation, reliability issues, and failure. Typically, self-heating in WBG devices is studied using a single measurement technique while operating the device under steady-state direct current measurement conditions. However, for switching applications, this steady-state thermal characterization may lose significance since the high power dissipation occurs during fast transient switching events. Therefore, it can be useful to probe the WBG devices under transient measurement conditions in order to better understand the thermal dynamics of these systems in practical applications. In this work, the transient thermal dynamics of an AlGaN/GaN high electron mobility transistor (HEMT) were studied using thermoreflectance thermal imaging and Raman thermometry. Also, the proper use of iterative pulsed measurement schemes such as thermoreflectance thermal imaging to determine the steady-state operating temperature of devices is discussed. These studies are followed with subsequent transient thermal characterization to accurately probe the self-heating from steady-state down to submicrosecond pulse conditions using both thermoreflectance thermal imaging and Raman thermometry with temporal resolutions down to 15 ns.

42 ENGINEERING↗
NASA NTRS2022

Space Communications Responsive to Events Across Missions (SCREAM): An Investigation of Network Solutions for Transient Science Space Systems

Space Communications Responsive to Events Across Missions (SCREAM): An Investigation of Network Solutions for Transient Science Space Systems The National Academies have prioritized the pursuit of new scientific discoveries using diverse and temporally coordinated measurements from multiple ground and space-based observatories. Networked communications can enable such measurements by connecting individual observatories and allowing them to operate as a cohesive and purposefully designed system. Timely data flows across terrestrial and space communications networks are required to observe transient scientific events and processes. Currently, communications to space-based observatories experience large latencies due to manual service reservation and scheduling procedures, intermittent signal coverage, and network capacity constraints. If space communications network latencies could be reduced, new discoveries about dynamic scientific processes could be realized. However, science mission and network planners lack a systematic framework for defining, quantifying and evaluating timely space data flow implementation options for transient scientific observation scenarios involving multiple ground and space-based observatories. This dissertation presents a model-based systems engineering approach to investigate and develop network solutions to meet the needs of transient science space systems. First, a systematic investigation of the current transient science operations of the National Aeronautics and Space Administration’s (NASA) Tracking and Data Relay Satellite (TDRS) space data network and the Neil Gehrels Swift Observatory resulted in a formal architectural model for transient science space systems. Two methods individual missions may use to achieve timely network services were defined, quantitatively modeled, and experimentally compared. Next, the architectural model was extended to describe two alternative ways to achieve timely and autonomous space data flows to multiple space-based observatories within the context of a purposefully designed transient science observation scenario. A quantitative multipoint space data flow modeling method based in queueing theory was defined. General system suitability metrics for timeliness, throughput, and capacity were specified to support the evaluation of alternative network data flow implementations. A hypothetical design study was performed to demonstrate the multipoint data flow modeling method and to evaluate alternative data flow implementations using TDRS. The merits of a proposed future TDRS broadcast service to implement multipoint data flows were quantified and compared to expected outcomes using the as-built TDRS network. Then, the architectural model was extended to incorporate commercial network service providers. Quantitative models for Globalstar and Iridium short messaging data services were developed based on publicly available sources. Financial cost was added to the set of system suitability metrics. The hypothetical design study was extended to compare the relative suitability of the as-built TDRS network with the commercial Globalstar and Iridium networks. Finally, results from this research are being applied by NASA missions and network planners. In 2020, Swift implemented the first automated command pipeline, increasing its expected gravitational wave follow-up detection rate by greater than 400%. Current NASA technology initiatives informed by this research will enable future space-based observatories to become interoperable sensing devices connected by a diverse ecosystem of network service providers.

Christopher J. Roberts↗
NASA NTRSDate not supplied

Liftoff Environments

A Launch Environment, or Liftoff Environment, fundamentally represents a source of loading during the hold-down or liftoff phase of a rocket launch. A launch vehicle is subjected to transient and oscillatory pressure loading on its exterior surfaces induced by engines and boosters during vehicle hold-down and liftoff. These pressure loads are a principal source of structural vibration which may result in the malfunction of vehicle components or the fatigue of exterior skin panels or component brackets. Additionally, the pressure loading gives rise to sound pressure levels inside the crew cabin which may impact the crew's health, safety, or ability to communicate. Liftoff Environments can have a significant impact on the launch vehicle or surrounding structures. For SLS, there are eight primary environments supported by the Liftoff Environments team. These are Liftoff Acoustics (LOA), Hold-down Acoustics (HDA), RS-25 Nozzle Flow Transient (NFT) Acoustics, Booster Ignition Overpressure (IOP) & Duct Overpressure (DOP), Igniter Shock, Core Stage Engine (CSE) Overpressure, Excess Hydrogen (H2) Pop, and Infrasonic Acoustics. These can be split generally into acoustics, which are sustained stationary events, and transients, which are short duration nonstationary events.

Matthew J Casiano↗
NASA NTRS2006

A Few Examples of Spacecraft Anomalies Attributed to Transient Voltages and Currents Issues

It is easy to address voltage and current transient related issues when the hardware in question or similar type of hardware is always available to you and when such issues are deterministic in nature. Unexpected or unforeseen transient related problems are not always a challenge but become a severe concern when a unique piece of the hardware, which developed the problem, is in space; as it is with all satellites. This paper addresses in a qualitative manner, a few examples of voltage and current events of transient origin which disabled space hardware.

transient origin↗
NASA NTRS1994

Constraints on chondrule agglomeration from fine-grained chondrule rims

Fine-grained rims around chondrules, Ca,Al-rich inclusions, and other coarse-grained components occur in most types of unequilibrated chondrites, most prominently in carbonaceous chondrites of the CM group. Based on mineralogical and petrographic investigations, it was suggested that rim structures in unequilibrated ordinary chondrites could have formed in the solar nebula by accretion of dust on the surfaces of the chondrules. Dust mantles in CM chondrites seem to have formed by accretion of dust on the surfaces of chondrules and other components during their passage through dust-rich regions in the solar nebula. Concentric mantles with compositionally different layers prove the existence of various distinct dust reservoirs in the vicinity of the accreting parent body. Despite mineralogical and chemical differences, fine-grained rims from other chondrite groups principally show striking similarities to dust mantle textures in CM chondrite. This implies that the formation of dust mantles was a cosmically significant event like the chondrule formation itself. Dust mantles seem to have formed chronologically between chondrule-producing transient heating events and the agglomeration of chondritic parent bodies. For this reason the investigation of dust mantle structures may help to answer the question of how a dusty solar nebula was transformed into a planetary system.

Metzler, K.↗
NASA NTRS1996

Patent Foramen Ovale: Association between the Degree of Shunt by Contrast Transesophageal Echocardiography and the Risk of Future Ischemic Neurologic Events

This study investigated whether there is an association between the degree of interatrial shunting across a patent foramen ovale, as determined by saline contrast transesophageal echocardiography, and the risk of subsequent systemic embolic events, including stroke. Thirty-four patients found to have patent foramen ovale during transesophageal echocardiography were divided into two groups on the basis of the maximum number of microbubbles in the left heart in any single frame after intravenous saline contrast injection: group 1 (n = 16) with a "large" degree of shunt (220 microbubbles) and group 2 (n = 18) with a "small" degree of shunt (23 but <20 microbubbles). Patients were followed up over a mean period of 21 months for subsequent systemic embolic events, including transient ischemic attack and stroke. Five (31%) of the patients with large shunts had subsequent ischemic neurologic events, whereas none of the patients with small shunts had embolic events (p= 0.03). These events occurred in spite of antiplatelet or anticoagulant therapy. We conclude that patients with a large degree of shunt across a patent foramen ovale, as determined by contrast transesophageal echocardiography, are at a significantly higher risk for subsequent adverse neurologic events compared with patients with a small degree of shunt.

Stone, David A.↗
NASA NTRS1988

Primary task event-related potentials related to different aspects of information processing

The results of two studies which investigated the relationships between cognitive processing and components of transient event-related potentials (ERPs) are presented in a task in which mental workload was manipulated. The task involved the monitoring of an array of discrete readouts for values that went out of bounds, and was somewhat analogous to tasks performed in cockpits. The ERPs elicited by the changing readouts varied with the number of readouts being monitored, the number of monitored readouts that were close to going out of bounds, and whether or not the change took a monitored readout out of bounds. Moreover, different regions of the waveform differentially reflected these effects. The results confirm the sensitivity of scalp-recorded ERPs to the cognitive processes affected by mental workload and suggest the possibility of extracting useful ERP indices of primary task performance in a wide range of man-machine settings.

Munson, Robert C.↗
NASA NTRS2004

Using automated planning for sensorweb response

This paper describes efforts to link these science event detection systems with an automated response system to retarget remote sensing assets to observe these important but transient science events. Of course, automated mission planning is a key element of the overall tracking and response system. We describe the current prototype system which utilizes the Earth Observing One spacecraft, MODIS flying on Terra and Aqua, QuickSCAT, GOES, and AVHRR platforms as well as future plans for expansion.

sensorweb response↗
NASA NTRS2011

Sky Event Reporting Metadata (VOEvent) Version 2.0

VOEvent [20] defines the content and meaning of a standard information packet for representing, transmitting, publishing and archiving information about a transient celestial event, with the implication that timely follow-up is of interest. The objective is to motivate the observation of targets-of-opportunity, to drive robotic telescopes, to trigger archive searches, and to alert the community. VOEvent is focused on the reporting of photon events, but events mediated by disparate phenomena such as neutrinos, gravitational waves, and solar or atmospheric particle bursts may also be reported. Structured data is used, rather than natural language, so that automated systems can effectively interpret VOEvent packets. Each packet may contain zero or more of the "who, what, where, when & how" of a detected event, but in addition, may contain a hypothesis (a "why") regarding the nature of the underlying physical cause of the event.

Seaman, Rob↗
NASA NTRSDate not supplied

Improving the transient sensitivity of AMEGO-X using single-site events

AMEGO-X is a proposed Compton/pair telescope which will image and survey the medium-energy gamma-ray sky between 100 keV and 1 GeV. It is designed to detect and characterize gamma-ray emission from multi-messenger sources. On short time scales (<100s), including information from single-site events (photoelectric effect interactions)significantly increases AMEGO-X's sensitivity and lowers its energy threshold down to 25 keV. In this presentation, we will present AMEGO-X's sensitivity to transient events such as gamma-ray bursts and magnetar giant flares, and discuss the improvements due to the inclusion of single-site events. We will also discuss AMEGO-X's ability to localize transient sources and alert the community for follow-up observations.

Henrike Fleischhack↗
NASA NTRSDate not supplied

Improving the Transient Sensitivity of AMEGO-X Using Single-site Events

AMEGO-X is a Compton/pair gamma-ray telescope, submitted to NASA's 2021 MIDEX AO, which will image and survey the medium-energy gamma-ray sky between 100 keV and 1 GeV. It is designed to detect and characterize gamma-ray emission from multi-messenger sources. On short time scales (<100s), including information from single-site events (photoelectric effect interactions) significantly increases AMEGO-X's sensitivity and lowers its energy threshold down to 25 keV. In this presentation, we will present AMEGO-X's sensitivity to transient events such as gamma-ray bursts and magnetar giant flares, and discuss the improvements due to the inclusion of single-site events. We will also discuss AMEGO-X's ability to localize transient sources and alert the community for follow-up observations.

Henrike Fleischhack↗
DOE OSTI2020

Arctic Coastal Erosion: Modeling and Experimentation

Increasing Arctic coastal erosion rates have put critical infrastructure and native communities at risk while also mobilizing ancient organic carbon into modern carbon cycles. Although the Arctic comprises one-third of the global coastline and has some of the fastest eroding coasts, current tools for quantifying permafrost erosion are unable to explain the episodic, storm-driven erosion events. Our approach, mechanistically coupling oceanographic predictions with a terrestrial model to capture the thermo-mechanical dynamics of erosion, enables this much needed treatment of transient erosion events. The Arctic Coastal Erosion Model consists of oceanographic and atmospheric boundary conditions that force a coastal terrestrial permafrost environment in Albany (a multi-physics based finite element model). An oceanographic modeling suite (consisting of WAVEWATCH III, Delft3D-FLOW, and Delft3D-WAVE) produced time-dependent surge and run-up boundary conditions for the terrestrial model. In the terrestrial model, a coupling framework unites the mechanical and thermal aspects of erosion. 3D stress/strain fields develop in response to a plasticity model of the permafrost that is controlled by the frozen water content determined by modeling 3D heat conduction and solid-liquid phase change. This modeling approach enables failure from any allowable deformation (block failure, slumping, etc.). Extensive experimental work has underpinned the ACE Model development including field campaigns to measure in situ ocean and erosion processes, strength properties derived from thermally driven geomechanical experiments, as well as extensive physical composition and geochemical analyses. Combined, this work offers the most comprehensive and physically grounded treatment of Arctic coastal erosion available in the literature. The ACE model and experimental results can be used to inform scientific understanding of coastal erosion processes, contribute to estimates of geochemical and sediment land-to-ocean fluxes, and facilitate infrastructure susceptibility assessments.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

Transients and Dayside Magnetospheric Interactions

Observations at and deep within the Earth’s dayside magnetosphere provide considerable evidence indicating that the solar wind-magnetosphere interaction is often unsteady. Bursty reconnection resulting in the formation of flux transfer events and transient auroral brightenings is common. Fluctuations in solar wind parameters may trigger some bursts of reconnection, while other bursts may result from intrinsic magnetopause instabilities. Large amplitude solitons often travel along the dayside magnetopause. Deeper within the dayside magnetosphere, quasi-periodic transient compressions energize radiation belt electrons and ring current ions. Most of these perturbations occur behind the quasi-parallel bow shock, indicating that they are driven by density structures generated by kinetic processes within the foreshock. This presentation compares and contrasts the amplitudes and occurrence patterns of density and dynamic pressure perturbations intrinsic to the solar wind with those generated within the foreshock, specifies how they move across the magnetosphere, examines recent global MHD simulation results for their interaction with the bow shock, magnetosheath, and magnetopause. It then outlines new paths toward quantifying the significance of bursty reconnection to the overall interaction, via new imaging and analysis techniques.

D. G. Sibeck↗
DOE OSTI2025

Mechanical Property Assessment of Unirradiated Cladding After Exposure to Time at Temperature

Light water reactors in the United States are operated within inherent safety limits designed to account for anticipated operational occurrences (AOOs). Unlike more severe reactor transients, these events permit the potential reuse of reactor cladding, highlighting the nuanced role of thresholds in influencing reactor efficiency compared to design-basis or beyond-design-basis transient conditions. The threshold designated for AOO peak cladding and fuel temperatures are currently grounded around thermal hydraulic limits such as surpassing the critical heat flux (CHF), rather than in fuel-cladding material performance. This CHF criterion therefore represents a conservative approach to AOO transients during the reactor lifetime. Extending this threshold to higher temperatures than CHF can result in additional operation efficiency gains. Here, a material performance-based approach is assessed to better understand the physical material limits of short time scale exposures to elevated temperatures. This approach, termed time at temperature (t@T), references fuel cladding microstructural and mechanical response to rapid temperature transients in absence of radiation damage. The results of this work are expected to help identify margin for the United States reactor fleet, which could be utilized to increase operational efficiencies through decreased reactor outages.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗