SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
High speed flowing gas system provides uniform mixing in short times compared to flow transit times and carbon dioxide vibrational relaxation times. This system minimizes the effects of surrounding surfaces and provides a uniformly high gain that is independent of dimensions transverse to the flow direction.
A Monte Carlo method is adopted as a basis for the derivation of the photoelectron heat input into the ionospheric plasma. This approach is modified in an attempt to minimize the computation time. The heat input distributions are computed for arbitrarily small source elements that are spaced at distances apart corresponding to the photoelectron dissipation range. By means of a nonlinear interpolation procedure their individual heating rate distributions are utilized to produce synthetic ones that fill the gaps between the Monte Carlo generated distributions. By varying these gaps and the corresponding number of Monte Carlo runs the accuracy of the results is tested to verify the validity of this procedure. It is concluded that this model can reduce the computation time by more than a factor of three, thus improving the feasibility of including Monte Carlo calculations in self-consistent ionosphere models.
A Monte Carlo method is adopted as a basis for the derivation of the photoelectron-heat input into the ionospheric plasma. Since a great number of Monte Carlo runs are required normally for the computation of the heating rates, this approach is modified in an attempt to minimize the computation time. The heat-input distributions are computed for arbitrarily small source elements that are spaced apart at distances corresponding to the photoelectron dissipation range. By means of a nonlinear interpolation procedure their individual heating-rate distributions are utilized to produce synthetic ones that fill the gaps between the Monte Carlo generated distributions. By varying these gaps and the corresponding number of Monte Carlo runs the accuracy of the results is tested to verify the validity of this procedure. It is concluded that this model can reduce the computation time by as much as an order of magnitude, thus improving the feasibility of including Monte Carlo calculations in self-consistent ionosphere models.
Program uses minimal core and time resources and performs following analysis functions: artwork verification, device identification, nodal analysis, capacitance calculation, and logic equation generation. For data base simplicity, program processing operates on mask data which has been coverted from its original form to orthogonal rectangles.
The interception of solar power by the canopy is investigated as a function of solar zenith angle (time), component of the canopy, and depth into the canopy. The projected foliage area, cumulative leaf area, and view factors within the canopy are examined as a function of the same parameters. Two systems are proposed that are capable of describing the geometrical aspects of a vegetative canopy and of operation in an automatic mode. Either system would provide sufficient data to yield a numerical map of the foliage area in the canopy. Both systems would involve the collection of large data sets in a short time period using minimal manpower.
The paper investigates the effectiveness of different basic display augmentation concepts - fixed reticle, velocity vector, and predicted future vehicle path - for RPVs controlled by a vehicle-mounted TV camera. The task is lateral manual control of a low flying RPV along a straight reference line in the presence of random side gusts. The man-machine system and the visual interface are modeled as a linear time-invariant system. Minimization of a quadratic performance criterion is assumed to underlie the control strategy of a well-trained human operator. The solution for the optimal feedback matrix enables the explicit computation of the variances of lateral deviation and directional error of the vehicle and of the control force that are used as performance measures.
Recently two dissection algorithms (one-way and incomplete nested dissection) have been developed for solving the sparse positive definite linear systems arising from n by n grid problems. Concurrently, vector computers (such as the CDC STAR-100 and TI ASC) have been developed for large scientific applications. An analysis of the use of dissection algorithms on vector computers dictates that vectors of maximum length be utilized thereby implying little or no dissection; on the other hand, minimizing operation counts suggest that considerable dissection be performed. In this paper we discuss the resolution of this conflict by minimizing the total time required by vectorized versions of the two algorithms.
A method is presented for optimizing (minimizing) the acquisition time for a PN-type spread spectrum system when the a priori probability density function is not uniform. For an assumed a priori Gaussian density function, calculations show that the acquisition time, when the 0.5 probability acquisition time is used as a measure of acquisition time, is reduced by 40% for a cell detection probability of 0.25 and when three sweeps are used. For the same parameters and with four sweeps the acquisition time is reduced by 41%. When the acquisition time probability is set to 0.9 instead of 0.5, the reduction is 25% of the uniform sweep time.
Infrared scanning technique for finding defects in secondary barrier of liquid natural gas (LNG) tank has been successfully tested on ship under construction at Newport News Shipbuilding and Dry Dock Company. Technique determines defects with minimal expenditure of time and manpower. Tests could be repeated during life of tanker and make more complicated testing unnecessary. Tests also confirmed that tank did not have any major defects, and tank was certified.
The development of an analysis software system capable of performing interdisciplinary preliminary design analyses of large space structure configurations is discussed. Disciplines such as thermal, structures, and controls are to be integrated into a highly user oriented analysis capability. The key feature of the integrated analysis capability, a rapid and efficient system that will minimize solution turnaround time, is discussed.
A method for synthesizing digital active flutter suppression controllers using the concept of optimal output feedback is presented. A convergent algorithm is employed to determine constrained control law parameters that minimize an infinite time discrete quadratic performance index. Low order compensator dynamics are included in the control law and the compensator parameters are computed along with the output feedback gain as part of the optimization process. An input noise adjustment procedure is used to improve the stability margins of the digital active flutter controller. Sample rate variation, prefilter pole variation, control structure variation and gain scheduling are discussed. A digital control law which accommodates computation delay can stabilize the wing with reasonable rms performance and adequate stability margins.
A scheme has been developed and verified for closed-loop tracking and pointing space-borne science instruments at small celestial bodies, such as comets and asteroids, during high velocity encounters. To overcome ephemeris uncertainties for these bodies, the scheme involves sequential estimation of flyby model parameters. The design consists of a two-axis gimballed platform mounted on a three-axis stabilized spacecraft. A platform-mounted optical tracker provides closed-loop target measurements and precision micro-step actuators enable high-rate platform slewing. For comet missions which involve dust particle impact disturbances, a dual-mode attitude control scheme is presented for minimizing transient response time.
This paper describes the development of automated location and geometric rectification techniques for digitally processed synthetic aperture radar (SAR) imagery. A software package has been developed that is capable of determining the absolute location of an image pixel to within 60 m using only the spacecraft ephemeris data and the characteristics of the SAR data collection and processing system. Based on this location capability algorithms have been developed that geometrically rectify the imagery, register it to a common coordinate system and mosaic multiple frames to form extended digital SAR maps. These algorithms have been optimized using parallel processing techniques to minimize the operating time. Test results are given using Seasat SAR data.
The application of quaternions for the articulation control of the Galileo scan platform is presented in this paper. The purpose of selecting quaternions is to minimize onboard computation time and program size. Attention has been focused on performing inertial pointing while the spacecraft is in a dual spin configuration. Target quaternion and relative target quaternion are introduced and used to specify the target position of the scan platform for point-to-point absolute slews and mosaic relative slews, respectively. The pointing error of the platform is represented by an error quaternion which is converted into gimbal angular errors defining the attitude change. For path control, a moving target quaternion is generated; the corresponding tracking error quaternion and the related spacecraft motion compensation capability are also addressed. A sample slew case is used to demonstrate the implementation of these concepts.
Rotary seal for turbopump combines low leakage of labyrinth seal with high load capacity of smooth-surface annular seal. New seal acts as strong journal bearing that provides high stiffness - about same as that of ball bearings for turbopump shaft. Seal shares load with ball bearings and prolongs their lives. At same time, seal allows minimal leakage of fluid from pump. By combining leakage control and bearing functions, seal makes multiple seals unnecessary and allows compact design.
Four design methodologies for loop filters for a class of digital phase-locked loops (DPLLs) are presented. The first design maps an optimum analog filter into the digital domain; the second approach designs a filter that minimizes in discrete time weighted combination of the variance of the phase error due to noise and the sum square of the deterministic phase error component; the third method uses Kalman filter estimation theory to design a filter composed of a least squares fading memory estimator and a predictor. The last design relies on classical theory, including rules for the design of compensators. Linear analysis is used throughout the article to compare different designs, and includes stability, steady state performance and transient behavior of the loops. Design methodology is not critical when the loop update rate can be made high relative to loop bandwidth, as the performance approaches that of continuous time. For low update rates, however, the miminization method is significantly superior to the other methods.
An efficient linearization method is presented for calculating the transient response of nonlinear systems due to initial disturbances. The method is an extension of the describing function approach in which the steady state response of the system is calculated by representing the nonlinear element, typically joints in the case of space structures, by impedances which are functions of the amplitude of response. Thus, the problem of solving the differential equation for the steady state response becomes one of solving a set of nonlinear algebraic equations involving the steady state amplitudes and phases of the system. It is shown that for the transient case the steady state impedances can be averaged over the range of responses in order to provide equivalent values of stiffness and damping that, for a given set of initial displacements, may be treated as being constant for purposes of calculating system response. Single degree of freedom system are used to demonstrate the method and to develop an approach for optimizing the joint's characteristics so as to minimize transient response times. The use of this method for response estimation and optimization in multiple degree of freedom systems is investigated.
An overview of parabolic and PNS (Parabolized Navier-Stokes) methodology developed to treat highly curved sub and supersonic wall jets is presented. The fundamental data base to which these models were applied is discussed in detail. The analysis of strong curvature effects was found to require a semi-elliptic extension of the parabolic modeling to account for turbulent contributions to the normal pressure variations, as well as an extension to the turbulence models utilized, to account for the highly enhanced mixing rates observed in situations with large convex curvature. A noniterative, pressure split procedure is shown to extend parabolic models to account for such normal pressure variations in an efficient manner, requiring minimal additional run time over a standard parabolic approach. A new PNS methodology is presented to solve this problem which extends parabolic methodology via the addition of a characteristic base wave solver. Applications of this approach to analyze the interaction of wave and turbulence processes in wall jets is presented.