Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “temperature acceleration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Achievable flatness in a large microwave power transmitting antenna

A dual reference SPS system with pseudoisotropic graphite composite as a representative dimensionally stable composite was studied. The loads, accelerations, thermal environments, temperatures and distortions were calculated for a variety of operational SPS conditions along with statistical considerations of material properties, manufacturing tolerances, measurement accuracy and the resulting loss of sight (LOS) and local slope distributions. A LOS error and a subarray rms slope error of two arc minutes can be achieved with a passive system. Results show that existing materials measurement, manufacturing, assembly and alignment techniques can be used to build the microwave power transmission system antenna structure. Manufacturing tolerance can be critical to rms slope error. The slope error budget can be met with a passive system. Structural joints without free play are essential in the assembly of the large truss structure. Variations in material properties, particularly for coefficient of thermal expansion from part to part, is more significant than actual value.

Ried, R. C.↗

Electron heating by fast mode magnetohydrodynamic waves in the solar wind emanating from coronal holes

It is shown that fast mode magnetohydrodynamic waves, propagating outwards from the sun in coronal hole regions, will dissipate primarily through collisionless interaction with electrons rather than with protons. This dissipation can lead to higher electron than proton temperatures in the accelerating region of the solar wind, provided the waves carry a sufficiently large energy flux.

Habbal, S. R.↗

Thrust chamber life prediction

The reusable life of the Space Shuttle main engine (SSME) is influenced by the cyclic life of the regeneratively liquid cooled main combustion chamber (MCC). During an operational duty cycle the MCC liner is subjected to a large transient thermal gradient that imparts a high thermal cyclic strain to the liner hot gas wall. Life predictions of such chambers have usually been based on low cycle fatigue (LCF) evaluations. Hot-fire testing, however, has shown significant mid-channel wall deformation and thinning during accrued cyclic testing. This phenomenon is termed cyclic creep and appears to be significantly accelerated at elevated temperatures. An analytical method that models the cyclic creep phenomenon and its application to thrust chamber life prediction is presented. The chamber finite element geometry is updated periodically to account for accrued wall thinning and distortion. Failure is based on the tensile instability failure criterion. Cyclic life results for several chamber life enhancing coolant channel designs are compared to the typically used LCF analysis that neglects cyclic creep. The results show that the usable cyclic creep life is approximately 30 to 50% of the commonly used LCF life.

Kasper, H. J.↗

A review of turbulent-boundary-layer heat transfer research at Stanford, 1958-1983

For the past 25 years, there has existed in the Thermosciences Laboratory of the Mechanical Engineering Department of Stanford University a research program, primarily experimental, concerned with heat transfer through turbulent boundary layers. In the early phases of the program, the topics considered were the simple zero-pressure-gradient turbulent boundary layer with constant and with varying surface temperature, and the accelerated boundary layer. Later equilibrium boundary layers were considered along with factors affecting the boundary layer, taking into account transpired flows, flows with axial pressure gradients, transpiration, acceleration, deceleration, roughness, full-coverage film cooling, surface curvature, free convection, and mixed convection. A description is provided of the apparatus and techniques used, giving attention to the smooth plate rig, the rough plate rig, the full-coverage film cooling rig, the curvature rig, the concave wall rig, the mixed convection tunnel, and aspects of data reduction and uncertainty analysis.

Moffat, R. J.↗

Low temperature safety of lithium-thionyl chloride cells

The use of lithium thionyl chloride cells for low-temperature applications is presently restricted because of their unsafe behavior. An attempt is made in the present investigation to identify the safe/unsafe low temperature operating conditions and to understand the low temperature cell chemistry responsible for the unsafe behavior. Cells subjected to extended reversal at low rate and -40 C were found to explode upon warm-up. Lithium was found to deposit on the carbon cathodes during reversal. Warming up to room temperature may be accelerating the lithium corrosion in the electrolyte. This may be one of the reasons for the cell thermal runaway.

Subbarao, S.↗

Long-term prediction test procedure for most ICs, based on linear response theory

Experimentally, thermal annealing is known to be a factor which enables a number of different integrated circuits (IC's) to recover their operating characteristics after suffering radiation damage in the space radiation environment; thus, decreasing and limiting long term cumulative total-dose effects. This annealing is also known to be accelerated at elevated temperatures both during and after irradiation. Linear response theory (LRT) was applied, and a linear response function (LRF) to predict the radiation/annealing response of sensitive parameters of IC's for long term (several months or years) exposure to the space radiation environment were constructed. Compressing the annealing process from several years in orbit to just a few hours or days in the laboratory is achieved by subjecting the IC to elevated temperatures or by increasing the typical spaceflight dose rate by several orders of magnitude for simultaneous radiation/annealing only. The accomplishments are as follows: (1) the test procedure to make predictions of the radiation response was developed; (2) the calculation of the shift in the threshold potential due to the charge distribution in the oxide was written; (3) electron tunneling processes from the bulk Si to the oxide region in an MOS IC were estimated; (4) in order to connect the experimental annealing data to the theoretical model, constants of the model of the basic annealing process were established; (5) experimental data obtained at elevated temperatures were analyzed; (6) time compression and reliability of predictions for the long term region were shown; (7) a method to compress test time and to make predictions of response for the nonlinear region was proposed; and (8) nonlinearity of the LRF with respect to log(t) was calculated theoretically from a model.

Litovchenko, V.↗

Microgravity science requirements and the need for data compression

The Microgravity Science and Applications Div. (MSAD) of the NASA Office of Space Science and Applications (OSSA) is responsible for encouraging and directing the research of a wide range of physical phenomena in reduced gravity. Under MSAD's direction, NASA-Lewis is presently developing the concept of a multiuser facility which will perform combustion science experiments in space. This facility, the Combustion Experiment Module (CEM), will be located in either the Shuttle Spacelab or the Space Station Freedom lab and will be operational by mid-1997. In addition to standard instrumentation to measure temperature, pressure, and acceleration, CEM shall use a variety of imaging and optical diagnostic techniques. Images shall be the primary source of experimental data. These images create an enormous amount of data which must be archived on orbit for later analysis. Also, ground based investigators will require enough data from the orbiting facility to determine if the experimental parameters need to be changed before proceeding with the next run. The storage and transmission of this data present a major challenge to the CEM design. Data compression will play a major role in the design of the CEM diagnostics system.

Hartz, William G.↗

Aerothermal Instrumentation Loads To Implement Aeroassist Technology in Future Robotic and Human Missions to MARS and Other Locations Within the Solar System

The strategy of NASA to explore space objects in the vicinity of Earth and other planets of the solar system includes robotic and human missions. This strategy requires a road map for technology development that will support the robotic exploration and provide safety for the humans traveling to other celestial bodies. Aeroassist is one of the key elements of technology planning for the success of future robot and human exploration missions to other celestial bodies. Measurement of aerothermodynamic parameters such as temperature, pressure, and acceleration is of prime importance for aeroassist technology implementation and for the safety and affordability of the mission. Instrumentation and methods to measure such parameters have been reviewed in this report in view of past practices, current commercial availability of instrumentation technology, and the prospects of improvement and upgrade according to the requirements. Analysis of the usability of each identified instruments in terms of cost for efficient weight-volume ratio, power requirement, accuracy, sample rates, and other appropriate metrics such as harsh environment survivability has been reported.

Parmar, Devendra S.↗

Application of Thermo-Mechanical Measurements of Plastic Packages for Reliability Evaluation of PEMS

Thermo-mechanical analysis (TMA) is typically employed for measurements of the glass transition temperature (Tg) and coefficients of thermal expansion (CTE) in molding compounds used in plastic encapsulated microcircuits (PEMs). Application of TMA measurements directly to PEMs allows anomalies to be revealed in deformation of packages with temperature, and thus indicates possible reliability concerns related to thermo-mechanical integrity and stability of the devices. In this work, temperature dependencies of package deformation were measured in several types of PEMs that failed environmental stress testing including temperature cycling, highly accelerated stress testing (HAST) in humid environments, and bum-in (BI) testing. Comparison of thermo-mechanical characteristics of packages and molding compounds in the failed parts allowed for explanation of the observed failures. The results indicate that TMA of plastic packages might be used for quality evaluation of PEMs intended for high-reliability applications.

Sharma, Ashok K.↗

Advanced Materials and Coatings for Aerospace Applications

In the application area of aerospace tribology, researchers and developers must guarantee the highest degree of reliability for materials, components, and systems. Even a small tribological failure can lead to catastrophic results. The absence of the required knowledge of tribology, as Professor H.P. Jost has said, can act as a severe brake in aerospace vehicle systems-and indeed has already done so. Materials and coatings must be able to withstand the aerospace environments that they encounter, such as vacuum terrestrial, ascent, and descent environments; be resistant to the degrading effects of air, water vapor, sand, foreign substances, and radiation during a lengthy service; be able to withstand the loads, stresses, and temperatures encountered form acceleration and vibration during operation; and be able to support reliable tribological operations in harsh environments throughout the mission of the vehicle. This presentation id divided into two sections: surface properties and technology practice related to aerospace tribology. The first section is concerned with the fundamental properties of the surfaces of solid-film lubricants and related materials and coatings, including carbon nanotubes. The second is devoted to applications. Case studies are used to review some aspects of real problems related to aerospace systems to help engineers and scientists to understand the tribological issues and failures. The nature of each problem is analyzed, and the tribological properties are examined. All the fundamental studies and case studies were conducted at the NASA Glenn Research Center.

Miyoshi, Kazuhisa↗

Space Shuttle Body Flap Actuator Bearing Testing for NASA Return to Flight

The Space Shuttle body flap is located beneath the main engine nozzles and is required for proper aerodynamic control during orbital descent. Routine inspection of one of four body flap actuators found one of the actuator bearings had degraded and blackened balls. A test program was initiated to demonstrate that it is acceptable to operate bearings which are degraded from operation over several flights. This test exposed the bearing to predicted flight axial loads, speeds and temperatures. Testing at 140 F has been completed, and results indicate the previously flown bearings are acceptable for up to 12 additional missions. Additional testing is underway to determine the lubricant life at various temperatures and stresses and to further understand the mechanism that caused the blacken balls. Initial results of this testing indicates that bearing life is shorten at room temperature possibly due fact that higher temperature (140 F) accelerates the flow of grease and oil into the wear surface

Jett, Timothy R.↗

Instrument for Analysis of Greenland's Glacier Mills

A new instrument is used to study the inner workings of Greenland s glacier mills by riding the currents inside a glacier s moulin. The West Greenland Moulin Explorer instrument was deployed into a tubular shaft to autonomously record temperature, pressure, 3D acceleration, and location. It is built with a slightly positive buoyancy in order to assist in recovery. The unit is made up of several components. A 3-axis MEMS (microelectromechanical systems) accelerometer with 0.001-g resolution forms the base of the unit. A pressure transducer is added that is capable of withstanding 500 psi (=3.4 MPa), and surviving down to -40 C. An Iridium modem sends out data every 10 minutes. The location is traced by a GPS (Global Positioning System) unit. This GPS unit is also used for recovery after the mission. Power is provided by a high-capacity lithium thionyl chloride D-sized battery. The accelerometer is housed inside a cylindrical, foot-long (=30 cm) polyvinyl chloride (PVC) shell sealed at each end with acrylic. The pressure transducer is attached to one of these lids and a MEMS accelerometer to the other, recording 100 samples per second per axis.

Behar, Alberto E.↗

Small Spacecraft Sample Return to Support Gateway and Lunar Science

The Lunar Gateway is a planned orbital outpost to support Lunar surface, Cislunar, and deep space exploration activities. NASA, together with international and commercial partners, are providing various capabilities, infrastructure, and services to build the Lunar economy. As Gateway capabilities and transportation logistics evolve, utilization is expected to increase, providing ample science, technology demonstration, and commercial development opportunities. Elements of the transportation network supporting Lunar activities are primarily focused on the outbound segment, which include Commercial Lunar Payload Services (CLPS), Human Landing System (HLS), Deep Space Logistics (DSL), and the SLS/Orion crew transportation system. Initially, the only Earth return segment will be provided via Orion. However, infrequent mission cadence (once every 12 months), limited payload return mass (100 kg), and operational constraints suggest that additional sample return logistics capability will be needed. Sustaining long-term presence at the Moon will likely require innovative approaches for frequent and affordable payload return. NASA Ames Research Center and the DSL team at Kennedy Space Center (which provides the Gateway Logistics Services missions) have investigated the development of a small spacecraft-based sample return capability to complement Orion. The goal of the first mission is to demonstrate the capability as a part of an early DSL mission, and provide up to 10 kg of scientific sample return from the Gateway. The mission concept envisions the progressive addition of sample return capabilities, including returning temperature- and acceleration-sensitive payloads, and evolution into a commercially provided service, similar to existing ISS payload return logistics. An overview of payload science and technology use cases and small spacecraft mission concepts will be presented to engage scientists, payload developers and mission planners who are considering Lunar exploration activities that will require the return of high-value samples from the Gateway and/or the lunar surface.

Alan Cassell↗

Small Spacecraft Sample Return Mission Concept to Support Gateway and Lunar Science

The Lunar Gateway is a planned orbital outpost to support Lunar surface, Cislunar, and deep space exploration activities. NASA, together with international and commercial partners, are providing various capabilities, infrastructure, and services to build the Lunar economy. As Gateway capabilities and transportation logistics evolve, utilization is expected to increase, providing ample science, technology demonstration, and commercial development opportunities. Elements of the transportation network supporting Lunar activities are primarily focused on the outbound segment, which include Commercial Lunar Payload Services (CLPS), Human Landing System (HLS), Deep Space Logistics (DSL), and the SLS/Orion crew transportation system. Initially, the only Earth return segment will be provided via Orion. However, infrequent mission cadence (once every 12 months), limited payload return mass (100 kg), and operational constraints suggest that additional sample return logistics capability will be needed. Sustaining long-term presence at the Moon will likely require innovative approaches for frequent and affordable payload return. NASA Ames Research Center and the DSL team at Kennedy Space Center (which provides the Gateway Logistics Services missions) have investigated the development of a small spacecraft-based sample return capability to complement Orion. The goal of the first mission is to demonstrate the capability as a part of an early DSL mission, and provide up to 10 kg of scientific sample return from the Gateway. The mission concept envisions the progressive addition of sample return capabilities, including returning temperature- and acceleration-sensitive payloads, and evolution into a commercially provided service, similar to existing ISS payload return logistics. An overview of payload science and technology use cases and small spacecraft mission concepts will be presented to engage scientists, payload developers and mission planners who are considering Lunar exploration activities that will require the return of high-value samples from the Gateway and/or the lunar surface.

Small Spacecraft↗

Small Spacecraft Sample Return Mission Concept to Support Gateway and Lunar Science

The Lunar Gateway is a planned orbital outpost to support Lunar surface, Cislunar, and deep space exploration activities. NASA, together with international and commercial partners, are providing various capabilities, infrastructure, and services to build the Lunar economy. As Gateway capabilities and transportation logistics evolve, utilization is expected to increase, providing ample science, technology demonstration, and commercial development opportunities. Elements of the transportation network supporting Lunar activities are primarily focused on the outbound segment, which include Commercial Lunar Payload Services (CLPS), Human Landing System (HLS), Deep Space Logistics (DSL), and the SLS/Orion crew transportation system. Initially, the only Earth return segment will be provided via Orion. However, infrequent mission cadence (once every 12 months), limited payload return mass (100 kg), and operational constraints suggest that additional sample return logistics capability will be needed. Sustaining long-term presence at the Moon will likely require innovative approaches for frequent and affordable payload return. NASA Ames Research Center and the DSL team at Kennedy Space Center (which provides the Gateway Logistics Services missions) have investigated the development of a small spacecraft-based sample return capability to complement Orion. The goal of the first mission is to demonstrate the capability as a part of an early DSL mission, and provide up to 10 kg of scientific sample return from the Gateway. The mission concept envisions the progressive addition of sample return capabilities, including returning temperature- and acceleration-sensitive payloads, and evolution into a commercially provided service, similar to existing ISS payload return logistics. An overview of payload science and technology use cases and small spacecraft mission concepts will be presented to engage scientists, payload developers and mission planners who are considering Lunar exploration activities that will require the return of high-value samples from the Gateway and/or the lunar surface.

Alan Cassell↗

Modeling Fuel Droplets in RCS Engine Exhaust Plume

Thrusters are used to maneuver spacecraft in space. Spacecraft maneuvering and attitude control is achieved by accelerating the high temperature and pressure exhaust gases, which are the result of chemical combustion in the case of chemical engines, through the rocket nozzle. Following the end of the nozzle a plume is created containing combustion gases and high velocity droplets of unburnt propellant that with time can erode the surfaces it strikes. A simulation that can accurately model a thruster’s plume can help us reduce the erosion of components struck by the plume. The creation of this simulation can be broken into several parts, and this paper focuses on finding out what distribution of particles along a plane in the nozzle, where combustion can be assumed to be complete, creates the observed particle distribution in the plume. Findings show that unburnt droplets are mostly concentrated in the center of the nozzle or uniformly dispersed within the nozzle.

CFD↗

Atmospheric Structure Investigation: Planetary in Situ Measurements of Atmospheric State Including Clouds/Aerosols.

The Atmospheric Structure Investigation (ASI) is a sensor suite designed for descent probes into planetary atmospheres, primarily aimed at Giant planets like Saturn and Uranus, and applicable to Venus, Titan, and Earth-specific missions. ASI aims to provide essential measurements of atmospheric structure, including probe acceleration, rotation, pressure, temperature, vertical winds, aerosol properties, and hydrogen and helium composition, crucial for contextualizing other probe data.

V Jha↗

AGING BEHAVIOR OF VITON O-RING SEALS IN THE 9975 SHIPPING PACKAGE

The Savannah River Site (SRS) is storing plutonium (Pu) materials in the K-Area Materials Storage (KAMS) facility. The Pu materials were packaged according to the DOE-STD-3013 standard and shipped to the SRS in Type B 9975 packages. The robust 9975 shipping package was not designed for long-term product storage, but it is a specified part of the storage configuration and the KAMS facility safety basis credits the 9975 design with containment. Within the 9975 package, nested stainless steel containment vessels are closed with dual O-ring seals based on Viton{reg_sign} GLT or GLT-S fluoroelastomer. The aging behavior of the O-ring compounds is being studied to provide the facility with advanced notice of nonconformance and to develop life prediction models. A combination of field surveillance, leak testing of surrogate fixtures aged at bounding service temperatures, and accelerated-aging methodologies based on compression stress-relaxation and oxygen consumption analysis is being used to evaluate seal performance. A summary of the surveillance program relative to seal aging behavior is presented.

36 MATERIALS SCIENCE↗