Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structured adsorbents”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Adsorption of Mixed Micelles of Polysorbate 80 and Oleic Acid to the Air–Water Interface

The solubilization of long chain amphiphiles with limited solubility into mixed micelles composed of highly soluble surfactants plays a crucial role in modulating the stability and functionality of formulations in pharmaceutical and food systems. Subsequently, the mixed micelles adsorb from solution to the air−water surface, defining the transport mechanism of the insoluble amphiphiles to the interface. We use X-ray reflectivity to measure the composition and provide insight into the structure of these mixed monolayers, and, alongside interfacial tension measurements, we provide an understanding of how the bulk composition determines the surface composition and the dynamics of tension reduction. We use a model system consisting of an insoluble fatty acid, oleic acid (OA), and a soluble micelle-forming surfactant, polysorbate 80 (PS80). PS80 forms spherical micelles, and, above the critical micelle concentration (cmc), OA is readily solubilized inside the micelles. We show that the adsorption of PS80/OA mixed micelles to the air−water interface rapidly reduces the tension and lowers the equilibrium tension in proportion to the OA concentration. X-ray reflectivity data, fit using Parratt-slab models, quantitively demonstrates that the monolayers become enriched with OA, and we show how the OA intercalates into the PS80 monolayers.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Oxygen evolution reaction over catalytic single-site Co in a well-defined brookite TiO 2 nanorod surface

Efficient electrocatalysts for the oxygen evolution reaction (OER) are paramount to the development of electrochemical devices for clean energy and fuel conversion. However, the structural complexity of heterogeneous electrocatalysts makes it a great challenge to elucidate the surface catalytic sites and OER mechanisms. Here, we report that catalytic single-site Co in a well-defined brookite TiO 2 nanorod (210) surface (Co-TiO 2 ) presents turnover frequencies that are among the highest for Co-based heterogeneous catalysts reported to date, reaching 6.6 ± 1.2 and 181.4 ± 28 s -1 at 300 and 400 mV overpotentials, respectively. Based on grand canonical quantum mechanics calculations and the single-site Co atomic structure validated by in situ and ex situ spectroscopic probes, we have established a full description of the catalytic reaction kinetics for Co-TiO 2 as a function of applied potential, revealing an adsorbate evolution mechanism for the OER. The computationally predicted Tafel slope and turnover frequencies exhibit exceedingly good agreement with experiment.

25 ENERGY STORAGE↗
NASA NTRS1995

Unoccupied electronic resonances of Sc adsorbed on W(001) by k-resolved inverse photoemission

Scandium adsorbed on the (001) face of tungsten has been studied using Auger-electron spectroscopy, low-energy electron diffraction, k-resolved inverse photoelectron spectroscopy, work-function measurements, and relativistic-electronic-structure calculations. We find that the work function of W(001) does not decrease monotonically as a function of scandium adsorption but reaches a minimum value of Phi = 3.25 eV at 50% coverage. For a complete monolayer, an order 1 X 1 Sc overlayer is formed. Inverse photoemission in the isochromat mode was used to map the unoccupied energy levels of this overlayer along the bar-Gamma(bar-Mu) symmetry direction of the surface Brillouin zone. Local-density-functional calculations using the muffin-tin orbital method were performed for a 1 X 1 Sc overlayer on W and are compared with the experimental two-dimensional band structure.

Lamouri, A.↗
DOE OSTI2020

Surface Hydration and Hydroxyl Configurations of Gibbsite and Boehmite Nanoplates

Discontinuation of the bulk structure at the interface between metal oxide particles and water leads to altered bonding characteristics and unique facet-dependent molecular environments. Surface hydration and consequent hydroxylation adds further complexity to the interface, details that for metal (oxy)hydroxides are especially difficult to isolate from the background signal of bulk structural hydroxyls. Here we probe for the first time the hydroxylation and hydration structures on basal surfaces of gibbsite (?-Al(OH)3) and boehmite (?-AlOOH) nanoplates at ambient conditions, using the interface-sensitive technique vibrational sum frequency generation spectroscopy (VSFG). Hydroxyl stretching modes at the interfaces with adsorbed water layers compared directly to Raman and infrared bulk modes show that while gibbsite surface frequencies were sharp and nearly identical to those in the bulk, boehmite surface hydroxyls displayed a very different broad spectrum of states. Ab initio molecular dynamics simulations of both basal surfaces with and without hydration waters reveal that gibbsite surface hydroxyls interact only weakly with overlying hydration waters remaining essentially unperturbed, whereasthose on boehmite can interact more strongly facilitated by higher configurational degrees of freedom at the interface. The findings clearly unveil substantial differences in the hydrated interfacial dynamics of these two otherwise similar materials, with implications for their interfacial chemistry and wettability.

Sassi, Michel JPC↗
DOE OSTI2022

Anion Effects on the Interfacial Structure and Bulk Physical Properties in Choline-Based Hydrogen-Bonded Electrolytes

Electrolytes consisting of choline (Ch) salts with acetate (Ac) and oxalate (Ox) anions were studied in mixtures with ethylene glycol (EG), in comparison to chloride (Cl)- and bis(trifluorosulfonyl)imide (TFSI)-containing systems to understand the impact of anion size and charge density on the bulk electrolyte and interfacial properties. These represent hydrogen-bonded concentrated electrolytes where the Ch salts are the H-bond acceptors (HBAs) and EG is the H-bond donor (HBD) in 1:2 and 1:4 HBA:HBD ratios. Increased H-bonding in Ch 2 Ox with EG compacts the liquid compared to ChAc, consistent with the increased dissociation energies of the HBA:HBD clusters with Ox –2 calculated by density functional theory (DFT), thus leading to denser and more viscous liquids. Electrochemical impedance spectroscopy (EIS) and surface-enhanced Raman spectroscopy (SERS) were used to investigate interfacial charge density and the electrode surface species. Differential capacitance curves demonstrate weak dependence on potential except for ChAc:EG, where Ac – is found to adsorb on the Au surface, in particular at +0.055 V vs Ag quasi-reference while no specific adsorption was observed on glassy carbon (GC). In situ SERS measurement confirms the formation of a surface layer in the ChAc:EG systems resulting from a Au–acetate interaction. Despite the structural similarities, Ox –2 did not show specific binding or any dependence of capacitance on potential as a result of strongly solvating EG molecules via H-bonds. Furthermore, this study shows that the charge density of the HBAs impacts both bulk properties and the electrical double-layer formation in concentrated H-bonded electrolytes that is relevant to electrochemical kinetics and morphology in electrodeposition processes and energy storage applications.

25 ENERGY STORAGE↗
DOE OSTI2023

Identifying High-Performance Metal–Organic Frameworks for Low-Temperature Oxygen Recovery from Helium by Computational Screening

Metal–organic frameworks (MOFs) are an important class of porous crystalline materials for applications ranging from gas adsorption and separation to catalysis. There are thousands of potential MOFs available for separation applications. Here, we developed a computational approach to screen MOFs for the separation of oxygen–helium mixtures at low temperatures (100–200 K), conditions that were motivated by issues associated with propulsion in space-based settings. We used detailed molecular simulations for a small number of MOFs to develop screening methods that were then used to estimate the optimum temperatures for separations using pressure swing adsorption for 2932 MOFs from the CoRE MOF database and the swing capacity and oxygen–helium selectivity at these temperatures. We used the stability of the best-performing structures in the presence of moisture as a means to provide a short list of high-performance materials. In addition to identifying specific materials for oxygen–helium separations, this approach could prove useful for selecting adsorbents for other gas separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Mechanistic Study of Controlled Zinc Electrodeposition Behaviors Facilitated by Nanoscale Electrolyte Additives at the Electrode Interface

Nanoparticle organic hybrid materials (NOHMs) are liquid-like materials composed of an inorganic core to which a polymeric canopy is ionically tethered. NOHMs have unique properties including negligible vapor pressure, high oxidative thermal stability, and the ability to bind to reactive species of interest due to the tunability of their polymeric canopy. This makes them promising multifunctional materials for a wide range of energy and environmental technologies, including electrolyte additives for electrochemical energy storage (e.g., flow batteries) and the electrochemical conversion of CO 2 to chemicals and fuels. Due to their unique transport behaviors in fluid systems, an understanding of the near-electrode surface behavior of NOHMs in electrolyte solutions and their effect on electrochemical reactions is still lacking. In this work, the complexation of zinc (Zn) by NOHMs with an ionically tethered polyetheramine canopy (HPE) (NOHM-I-HPE) was studied using attenuated total reflectance Fourier transform infrared and Carbon-13 nuclear magnetic resonance spectroscopy. Additionally, various electrochemical techniques were employed to discern the role of NOHM-I-HPE during zinc electrodeposition, and the results were compared to those of the electrochemical system containing untethered HPE polymers. Our findings confirmed that NOHM-I-HPE and HPE reversibly complex zinc in the aqueous electrolyte. NOHM-I-HPE and HPE were found to block some of the electrode active sites, reducing the overall current density during electrodeposition, while facilitating the formation of smooth zinc deposits, as revealed by surface imaging and diffraction techniques. Observed variations in the current density responses and the degree of passivation created by the NOHM-I-HPE and HPE adsorbed on the electrode surface revealed that their different packing behaviors at the electrode–electrolyte interface influence the zinc deposition mechanism. The presence of the nanoparticle and ordering offered by the NOHMs as well as the structured conformation of the polymeric canopy allowed the formation of void spaces and free volumes for enhanced transport behaviors. Furthermore, these findings provided insights into how structured electrolyte additives such as NOHMs can allow for advancements in electrolyte design for controlled deposition of metal species from energy-dense electrolytes or for other electrochemical reactions.

25 ENERGY STORAGE↗
DOE OSTI2025

Effects of Cofeeding Hydrogen on Propane Dehydrogenation Catalyzed by Isolated Iron Sites Incorporated into Dealuminated BEA

Iron sites dispersed on nonacidic siliceous supports have been reported to be catalytically active for propane dehydrogenation (PDH), yet the precise relationship between site structure and catalytic activity remains elusive. Here, this study provides a comprehensive understanding of the catalytic performance of iron supported on dealuminated BEA (DeAlBEA) zeolites for PDH. Using XAS, UV-vis, and IR spectroscopy of adsorbed pyridine and deuterated acetonitrile, it was found that, at an Fe/Al 0 of 0.04, isolated Fe sites form. These isolated sites exhibit a forward rate of PDH of 213 mol propene/mol Fe·h at 823 K and a feed containing 15 kPa propane. When 15 kPa of H 2 is added to the feed, the forward rate of PDH rises to 391 mol of propene/mol of Fe·h. In both cases, the propene selectivity is over 99%. IR spectroscopy of d 3 -acetonitrile suggests that the open Lewis acid site ((-Si-O-) 2 Fe 3+ -OH) serves as the active site responsible for PDH, while Brønsted acid sites (≡Fe 3+ -O(H)-Si≡) contribute to propane cracking with increasing Fe/Al 0 ratios. Kinetic analysis of the effects of H 2 addition to the propane feed on PDH kinetics shows that H 2 enhances the activity of 0.04FeDeAlBEA primarily by enhancing the strength of the propane adsorption.

Alghannam, Afnan [University of California, Berkel↗
DOE OSTI2025

Data for: Climatic Imprint on Interfacially-Controlled Platinum-Palladium Resources

Data package for manuscript "Climatic Imprint on Interfacially-Controlled Platinum-Palladium Resources" by Emily G. Wright, Ivey Wang, Yihang Fang, Elaine D. Flynn, and Jeffrey G. Catalano. This dataset contains adsorption results from experiments designed to investigate the effect of chloride on Pd(II) adsorption to goethite and Pt(II) adsorption to hematite and goethite, including lab experiments, X-ray absorption fine structure spectroscopy, and models of retention within a laterite. See the associated manuscript for full methods information. The file "Wright2025_PtAds_data.csv" contains the target starting Pt concentration (uM), final aqueous Pt and associated error (in uM), calculated adsorbed Pt and associated error (in umol/m2), target and measured aqueous chloride (mM), target aqueous nitrate (mM), final pH, and mineral concentration/loading (g/L). Associated mineral-free controls (mineral loading = 0 g/L) are included; the aqueous Pd error was not calculated and chloride was not measured in every sample. These data appear in Figures 1, S3, S4, S5, S20, and S22 in the associated manuscript. The file "Wright2025_PdAds_data.csv" contains the target starting Pd concentration (uM), final aqueous Pd and associated error (in uM), calculated adsorbed Pd and associated error (in umol/m2), target and measured aqueous chloride (mM), and mineral concentration/loading (g/L). Associated mineral-free controls (mineral loading = 0 g/L) are included; the aqueous Pd error was not calculated and chloride was not measured in every sample. These data appear in Figures 1, S3, S4, S5, and S20 in the associated manuscript. The file "Wright2025_MineralBatches_data.csv" contains the mineral identity and BET specific surface area (m2/g) for every mineral batch synthesized and used in experiments. The annealing time used is listed for hydrothermally annealed goethite. These data appear in Table S2 in the associated manuscript. The file "Wright2025_XRD_data.csv" contains the XRD patterns for every mineral batch synthesized as the counts as a function of two theta (in degrees). See "Wright2025_MineralBatches_data.csv" for more details on specific mineral batches. These data appear in Figure S2 in the associated manuscript. The file "Wright 2025_ZetaPotential_data.csv" contains the measured zeta potentials for samples of goethite (batch G2) at pH 4 the presence of varying amounts of sodium chloride. These data appear in Table S3 in the associated manuscript. The file "Wright2025_XAFSSamples_data.csv" contains the specific mineral batch, measured final aqueous Pd or Pt (uM), measured final aqueous chloride (mM), and estimated adsorbed Pd or Pt (umol/m2) of all XAFS samples. These data appear in Tables S4, S7, S8, and S10 in the associated manuscript. The files "Wright2025_PdXAFS_data.csv" and "Wright2025_PtXAFS_data.csv" contain the normalized spectra of Pd and Pt, respectively, adsorbed to minerals at varying chloride concentrations. See "Wright2025_XAFSSamples_data.csv" for a guide to sample names. Note that "05" in a sample name is equivalent to "0.5". These data appear in Figures 2, S6, S7, S8, S12, S13, and S14 in the associated manuscript. The file "Wright2025_LateriteProfileProfileModelParameters_data.csv" include the ratio of hematite to hematite and goethite in two synthetic, modeled profiles, as well as the modeled surface areas of goethite and hematite as a function of relative depth within the modeled weathering zone. These data were used, in conjunction with equations presented in the paper, to calculate the theoretical concentrations of Pd and Pt (and the resulting Pt/Pd ratio) within the profiles. These data appear in Figure 3 in the associated manuscript. The file "Wright2025_Imagery_data.zip" is a zipped folder containing the TEM and STEM images appear in Figures S18 and S19. Individual files are labeled as either STEM (Fig. S18) or TEM (Fig. S19) with a letter representing the part of the multipart figure.

58 GEOSCIENCES↗
DOE OSTI2020

Regenerative adsorbents of modified amines on solid supports

The invention relates to regenerative, solid sorbents for adsorbing carbon dioxide from a gas mixture, including air, with the sorbent including a modified polyamine and a solid support. The modified polyamine is the reaction product of an amine and an epoxide. The sorbent provides structural integrity, as well as high selectivity and increased capacity for efficiently capturing carbon dioxide from gas mixtures, including the air. The sorbent is regenerative, and can be used through multiple cycles of adsorption-desorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Regenerative adsorbents of modified amines on solid supports

The invention relates to regenerative, solid sorbents for adsorbing carbon dioxide from a gas mixture, including air, with the sorbent including a modified polyamine and a solid support. The modified polyamine is the reaction product of an amine and an epoxide. The sorbent provides structural integrity, as well as high selectivity and increased capacity for efficiently capturing carbon dioxide from gas mixtures, including the air. The sorbent is regenerative, and can be used through multiple cycles of adsorption-desorption.

Goeppert, Alain↗
DOE OSTI2023

Nickel Isonicotinate Framework with Optimal Pore Structure for Complete Discrimination of Hexane Isomers

Efficient separation of physicochemically similar alkanes is of vital importance. Adsorptive separation utilizing porous materials such as metal–organic frameworks with tunable pore structure and surface functionality represents an energy-efficient technology. In this study, we demonstrate successful separation of alkanes with varying degree of branching using a microporous nickel isonicotinate framework, Ni(4-PyC) 2 . Its 2-fold interpenetrated diamondoid structure with well-suited pore size enables selective adsorption of linear and monobranched hexane isomers, while excluding dibranched isomer. Breakthrough experiments validated its capability to completely discriminate all three hexane isomers. Ab initio calculations combined with in situ infrared spectroscopic analysis unveiled the nature of host–guest interactions and differences in the binding energies and diffusion barriers among the isomers. Furthermore, having well-balanced adsorption uptakes (146 and 79 mg g –1 of nHEX and 3MP), high nHEX/DMB uptake ratio (12.2) and fast kinetics, Ni(4-PyC) 2 stands out as a promising adsorbent for complete separation of hexane isomers under ambient conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Support-free adsorbents for CO 2 capture from air

A resin includes a functionalized aminopolymer having amine sites for capturing carbon dioxide molecules, where each aminopolymer molecule has at least one functional group amenable to crosslinking, a porogen, and a crosslinking initiator. A product includes an aminopolymer material formed into a self-supporting structure, the aminopolymer material including crosslinked aminopolymers having amine sites for the capture of carbon dioxide molecules.

Pang, Simon Hoching↗
DOE OSTI2025

Nitrate-To-Ammonia Electroconversion at Neutral pH on Polycrystalline Vanadium Sulfide Derived from Vanadium Disulfide

The electrochemical nitrate reduction reaction (NO3RR) offers a pathway to produce NH3 for fuel and fertilizer from waste NO3-. In this work, a polycrystalline vanadium sulfide (VSx), which is derived from solvothermally grown and annealed VS2, is shown to exhibit excellent NO3RR activity (2.3 +- 0.6 mg.cm-2 geo..h-1 @ -0.92 VRHE) and Faradaic efficiency to NH4+ (69 +- 6% at -0.69 VRHE) in buffered neutral pH electrolyte containing 0.1 M NO3-. A variety of characterization techniques are leveraged to support the VSx assignment, including X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure spectroscopy, selected area electron diffraction, and X-ray diffraction measurements. The VS2 annealing step reduces the oxide character and generates VSx, which, based on the improved NO3RR activity, results in the creation of active sites for NO3- binding. To help shed light on NO3RR on VSx, VS2 is used as a model system, and a grand-canonical density functional theory (GC-DFT) investigation of VS2 shows strong evidence that S vacancies are active sites for NO3RR, where NO3- outcompetes H+ for adsorption at the S-vacancy sites. Moreover, GC-DFT results highlight a thermodynamically favorable reaction to generate NH4+ in an aqueous electrolyte at relevant cathodic potentials. As an annealed material, VSx may contain undersaturated V sites, which show an electronic structure similar to the theoretically calculated S-vacancy site of VS2, and these sites may contribute to the observed increase in NO3RR activity and selectivity for NH4+ on VSx versus unannealed VS2. Finally, kinetic isotope effect measurements suggest that the kinetic rate-limiting step of the NO3RR on VSx is not proton-coupled, indicating it may be the first electron transfer to adsorbed NO3*.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Quest for an Optimal Methane Hydrate Formation in the Pores of Hydrolytically Stable Metal–Organic Frameworks

Porous metal–organic frameworks (MOFs) capable of storing a relatively high amount of dry methane (CH 4 ) in the adsorbed phase are largely explored; however, solid CH 4 storage in confined pores of MOFs in the form of hydrates is yet to be discovered. Here we report a rational approach to form CH 4 hydrates by taking advantage of the optimal pore confinement in relatively narrow cavities of hydrolytically stable MOFs. Unprecedentedly, we were able to isolate methane hydrate (MH) nanocrystals with an sI structure encapsulated inside MOF pores with an optimal cavity dimension. Furthermore, it was found that confined nanocrystals require cavities slightly larger than the unit cell crystal size of MHs (1.2 nm), as exemplified in the experimental case study performed on Cr- soc -MOF-1 vs smaller cavities of Y- shp -MOF-5. Under these conditions, the excess amount of methane stored in the pores of Cr- soc -MOF-1 in the form of MH was found to be ≈50% larger than the corresponding dry adsorbed amount at 10 MPa. More importantly, the pressure gradient driving the CH 4 storage/delivery process could be drastically reduced compared to the conventional CH 4 -adsorbed phase storage on the dry Cr- soc -MOF-1 (≤3 MPa vs 10 MPa).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Revealing CO 2 dissociation pathways at vicinal copper (997) interfaces

Size- and shape-tailored copper (Cu) nanocrystals can offer vicinal planes for facile carbon dioxide (CO 2 ) activation. Despite extensive reactivity benchmarks, a correlation between CO 2 conversion and morphology structure has not yet been established at vicinal Cu interfaces. Herein, ambient pressure scanning tunneling microscopy reveals step-broken Cu nanocluster evolutions on the Cu(997) surface under 1 mbar CO 2 (g). The CO 2 dissociation reaction produces carbon monoxide (CO) adsorbate and atomic oxygen (O) at Cu step-edges, inducing complicated restructuring of the Cu atoms to compensate for increased surface chemical potential energy at ambient pressure. The CO molecules bound at under-coordinated Cu atoms contribute to the reversible Cu clustering with the pressure gap effect, whereas the dissociated oxygen leads to irreversible Cu faceting geometries. Synchrotron-based ambient pressure X-ray photoelectron spectroscopy identifies the chemical binding energy changes in CO-Cu complexes, which proves the characterized real-space evidence for the step-broken Cu nanoclusters under CO(g) environments. Our in situ surface observations provide a more realistic insight into Cu nanocatalyst designs for efficient CO 2 conversion to renewable energy sources during C 1 chemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Self-Assembled Bolaamphiphile-Based Organic Nanotubes as Efficient Cu(II) Ion Adsorbents

Self-assembled organic nanotubes (ONTs) have been actively examined for various applications such as chemical separations and catalysis owing to their well-defined tubular nanostructures with distinct chemical environments at the wall and internal/external surfaces. Adsorption of heavy metal ions onto ONTs plays an essential role in many of these applications, but it has rarely been assessed quantitatively. Herein, we investigated interactions between Cu 2+ and single-/quadruple-wall bolaamphiphile-based ONTs having inner carboxyl groups with different inner diameters, COOH-ONT 10nm and COOH-ONT 20nm . We first examined the effects of Cu 2+ on their nanotubular structures using SAXS, STEM, and AFM. COOH-ONT 10nm was stable in aqueous Cu 2+ solution in contrast to COOH-ONT 20nm owing to the presence of polyglycine-II-type hydrogen bonding networks within its wall. Subsequently, we studied the Cu 2+ adsorption behavior of COOH-ONT 10nm by monitoring the concentration of unbound Cu 2+ using linear sweep anodic stripping voltammetry. The Cu 2+ adsorption was quick, attributable to efficient Cu 2+ partitioning through the open ends of the ONT, followed by fast Cu 2+ diffusion in the uniform, relatively large nanochannel. More importantly, the Cu 2+ adsorption capacity and affinity of COOH-ONT 10nm were measured at different pH using the Langmuir adsorption model. The adsorption capacity was similar at the pH range examined, showing the participation of approximately 25% of the inner carboxyl groups in the adsorption. The adsorption affinity increased with pH, indicating the essential role of the deprotonated carboxyl groups in the Cu 2+ adsorption. Most interestingly, the Langmuir adsorption constant was significantly higher than those of previously reported synthetic adsorbents and planar monolayer based on carboxyl binding sites. The high Cu 2+ affinity of the ONT was attributable to the highly dense binding sites on the well-defined nanoscale concave structure of the inner channel. Furthermore, these results provide a valuable guideline to designing self-assembled nanomaterials for efficient chemical separations, detection, and catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗