Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “storage complex”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Fiberboard Properties and Degradation Rates for Storage of 9975 Shipping Package in KAC (2022 Status Report)

Thermal, mechanical, and physical properties have been measured on fiberboard samples following accelerated aging for up to 17 years. The aging environments include elevated temperature up to 250 °F (the maximum allowed service temperature for fiberboard in 9975 packages) and elevated humidity. Accelerated aging results have been analyzed and used to build aging models. Correlations relating several properties (thermal conductivity, energy absorption, weight, dimensions, and density) to their rate of change in potential storage environments have been developed. Combined with an estimate of the actual conditions the fiberboard experiences in K-Area Complex (KAC), these models allow development of service life predictions. KAC completed calculations that supported extending the service life of 9975 packages with 3013 containers in storage from 20 years to 40 years. These calculations addressed the potential for degraded fiberboard properties following 40 years in storage using degradation models developed previously. Due to differences in containers, 9975 packages with non-3013 containers are only approved for 20 years of storage. The updated degradation models developed in this report have been compared to the assumptions in those calculations, and the current results for fiberboard dimensions, density, radial thermal conductivity, and energy absorption remain consistent with those calculations. The axial thermal conductivity degradation rate slightly exceeds calculations estimate of 0.5% per year between 130 and 160 °F. Additional data will continue to be collected to permit future refinements to the models and assumptions. Some of the predicted degradation rates presented in this report are extreme. However, these relate to environments that do not exist within KAC or would be postulated only as upset conditions that would not likely persist for an extended period. For a typical package stored in KAC with approximately 10-12 watts internal heat load or less, and ambient temperatures below 90 °F, the fiberboard assemblies experience storage conditions less severe than any of the aging environments. Fiberboard in conforming packages with lower internal heat loads should experience little or no degradation and is expected to provide a service life beyond the currently approved 40 year storage period. Packages with higher internal heat loads may not continue to perform their required safety functions beyond 40 years. Ultimately, service life will be determined by the cumulative effect of degradation from all the conditions these packages might encounter. The results and model predictions presented in this report are applicable to 9975 packages with cane or softwood fiberboard overpack assemblies. These degradation models do not address the effects of non-conforming conditions such as the presence of excess moisture and mold or beetle infestations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

2025 Status Report - Fiberboard Properties and Degradation Rates for Storage of 9975 Shipping Package in KAC

Fiberboard assemblies in the 9975 package were identified as susceptible to aging and degradation under long-term storage conditions. Thermal, mechanical, and physical properties have been measured on fiberboard samples aging for up to 20 years at accelerated conditions. The aging environments include elevated temperature up to 250 ºF (the maximum allowed service temperature for fiberboard in 9975 packages) and elevated humidity. Accelerated aging results have been analyzed and used to build aging models. Correlations relating several properties (thermal conductivity, energy absorption, weight, dimensions, and density) to their rate of change in potential storage environments have been developed. Combined with an estimate of the actual conditions the fiberboard experiences in K-Area Complex (KAC), these models allow development of service life predictions. KAC completed calculations that supported extending the service life of 9975 packages with 3013 containers in storage from 20 years to 40 years. These calculations addressed the potential for degraded fiberboard properties following 40 years in storage using degradation models. The 40 year storage evaluations assumed the degradation rates from initial values for density, dimensional, and thermal properties were 0.5% per year (i.e., after 40 years, the density, dimensional, and thermal properties of fiberboard were 80% of its initial values). The updated degradation models developed in this report were compared to the assumptions in those calculations, and the current results for fiberboard dimensions, density, axial and radial thermal conductivities, and energy absorption remain consistent with those calculations. Additional data will continue to be collected to permit future refinements to the models and assumptions. Some of the predicted degradation rates presented in this report are purposely high to accelerate aging. These rates relate to environments that do not exist within KAC or are postulated to only occur as upset conditions that are unlikely to persist for an extended period. For a typical package stored in KAC with approximately 10-12 watts internal heat load or less, and ambient temperatures below 90 ºF, the fiberboard assemblies experience storage conditions less severe than any of the aging environments (i.e., under 125 °F) used in this study. Fiberboard in conforming packages with lower internal heat loads should experience little or no degradation and is expected to provide a service life beyond the currently approved 40 year storage period. Packages with higher internal heat loads may not continue to perform their required safety functions beyond 40 years. Ultimately, service life will be determined by the cumulative effect of degradation from all the conditions these packages might encounter. The results and model predictions presented in this report are applicable to 9975 packages with cane or softwood fiberboard overpack assemblies. These degradation models do not address the effects of nonconforming conditions such as the presence of excess moisture and mold or beetle infestations.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1991

Robo-line storage: Low latency, high capacity storage systems over geographically distributed networks

Rapid advances in high performance computing are making possible more complete and accurate computer-based modeling of complex physical phenomena, such as weather front interactions, dynamics of chemical reactions, numerical aerodynamic analysis of airframes, and ocean-land-atmosphere interactions. Many of these 'grand challenge' applications are as demanding of the underlying storage system, in terms of their capacity and bandwidth requirements, as they are on the computational power of the processor. A global view of the Earth's ocean chlorophyll and land vegetation requires over 2 terabytes of raw satellite image data. In this paper, we describe our planned research program in high capacity, high bandwidth storage systems. The project has four overall goals. First, we will examine new methods for high capacity storage systems, made possible by low cost, small form factor magnetic and optical tape systems. Second, access to the storage system will be low latency and high bandwidth. To achieve this, we must interleave data transfer at all levels of the storage system, including devices, controllers, servers, and communications links. Latency will be reduced by extensive caching throughout the storage hierarchy. Third, we will provide effective management of a storage hierarchy, extending the techniques already developed for the Log Structured File System. Finally, we will construct a protototype high capacity file server, suitable for use on the National Research and Education Network (NREN). Such research must be a Cornerstone of any coherent program in high performance computing and communications.

Katz, Randy H.↗
DOE OSTI2024

Investigating Mountain Watershed Headwater‐To‐Groundwater Connections, Water Sources, and Storage Selection Behavior With Dynamic‐Flux Particle Tracking

Abstract Climate change will impact mountain watershed streamflow both directly—with changing precipitation amounts and variability—and indirectly—through temperature shifts altering snowpack, melt, and evapotranspiration. To understand how these complex processes will affect ecosystem functioning and water resources, we need tools to distinguish connections between water sources (rain/snowmelt), groundwater storage, and exit fluxes (streamflow/evapotranspiration), and to determine how these connections change seasonally and as climate shifts. Here, we develop novel watershed‐scale approaches to understand water source, storage, and exit flux connections using a dynamic‐flux particle tracking model (EcoSLIM) applied in California's Cosumnes Watershed, which connects the Sierra Nevada and Central Valley. This work develops new visualizations and applications to provide mechanistic understanding that underpins the interpretation of isotopic field data at watershed scales to distinguish sources, flow paths, residence times, and storage selection. In our simulations, streamflow comes primarily from snow‐derived water while evapotranspiration generally comes from rain. Most streamflow starts above 1,000 m while evapotranspiration is sourced relatively evenly across the watershed and is generally younger than streamflow. Modeled streamflow consists primarily of water sourced from precipitation in the previous 5 years but before the current water year, while ET consists primarily of water from precipitation in the current water year. ET, and to a lesser extent streamflow, are both younger than water in groundwater storage. However, snowmelt‐derived streamflow preferentially discharges older water from snow‐derived storage. Dynamic‐flux particle tracking and new approaches presented here enable novel model‐tracer comparisons in large‐scale watersheds to better understand watershed behavior in a changing climate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

An AI-Enabled MODEX Framework for Improving Predictability of Subsurface Water Storage across Local and Continental Scales

Focal Area: (2) Predictive modeling through the use of AI techniques and AI-derived model components. (3) Insight gleaned from complex data using AI, big data analytics, and other advanced methods. We propose an AI-enabled model-experiment (MODEX) framework to improve the predictability of subsurface water storage (SWS) from local to conus scales in a changing environment by taking advantage of DOE’s observation and simulation capabilities, as well as to inform the model and the observation development.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

High Strain Response and Dielectric Properties of Bi 1/2 (Na 0.78 K 0.22 ) 1/2 TiO 3 Ceramics Doped with (Fe 1/2 Nb 1/2 ) 4+

Environmentally friendly piezoceramics Bi 1/2 (Na 0.78 K 0.22 ) 1/2 Ti 1-x (Fe 1/2 Nb 1/2 ) x O 3 (BNKT-FN) with FeNb (FN) ratios 0, 0.01, 0.02, 0.03 and 0.04 were synthesized via conventional solid-state reaction (CSSR). X-ray diffraction (XRD) analysis revealed that the FN complexes were completely dissolved in BNKT perovskite and the structural transition occurred from ferroelectric to relaxor state. The average grain sizes for x = 0, 0.01, 0.02, 0.03 and 0.04 were found to be 0.34 μm, 0.35 μm, 0.38 μm, 0.32 μm and 0.39 μm, respectively. It is observed that the grain size increased with the addition of FN, except for x = 0.03. Here, the coercive field (E c ) and remnant polarization (P r ) of the system were decreased with increasing FN concentration and the highest E c of 21.1 kV/cm and P r of 29.2 μC/cm 2 were noted for the base pure sample. In addition, the increase of FN content steadily broadened the dielectric anomaly at maximum dielectric constant temperature (T m ) in the BNKT-FN system. Consequently, unipolar normalized strain (S max /E max ) was found to be enhanced monotonically achieving the highest value of around 654 pm/V (x = 0.02). These properties suggest that the investigated system could be a promising eco-friendly candidate for piezoelectric actuators and many other applications requiring high piezoelectric induced strain.

25 ENERGY STORAGE↗
DOE OSTI2022

Future energy infrastructure, energy platform and energy storage

Today fossil energy dominates energy consumption across the world. There has been an increasing momentum to reduce fossil energy consumption and increase renewable energy utilization to more than 70%. Such high penetrations of distributed renewable resources bring large uncertainty and complexity that cannot be easily handled by the current infrastructure. For the last two decades, telecommunication industry has gone through a similar transition from centralized to distributed systems, and more recently to platform approaches, which become the corner stone of today’s vibrant platform economy. Based on telecommunication history, we believe that a platform-based approach, called the energy platform, is a viable solution for addressing the renewable energy challenges. The energy platform consists of an array of computational algorithms, sensing and control technologies for key industry, energy generators and users to jointly manage and control the complex energy infrastructure. It includes the following key components: (1) the hardware and software to generate, store, control and transmit electricity/data (the energy cloud), (2) the digital platforms and tools for key energy producers, digital, service and communication industry to share the assets, participate in and manage the complex infrastructure, and for customers to participate in energy transactions, (3) the transaction platform for new service and business models. Additionally, the energy platform requires breakthroughs in large scale energy storage and many other areas including efficient power electronics, sensors and controls, new mathematical and computational tools, and deep integration of energy technologies and information sciences to control and stabilize such complex chaotic systems.

25 ENERGY STORAGE↗
DOE OSTI2021

Fiberboard Properties and Degradation Rates for Storage of 9975 Shipping Packages in KAC (2021 Status Report)

Thermal, mechanical, and physical properties have been measured on fiberboard samples following accelerated aging for up to 16 years. The aging environments include elevated temperature up to 250 ºF (the maximum allowed service temperature for fiberboard in 9975 packages) and elevated humidity. Accelerated aging results have been analyzed and used to build aging models. Correlations relating several properties (thermal conductivity, energy absorption, weight, dimensions, and density) to their rate of change in potential storage environments have been developed. Combined with an estimate of the actual conditions the fiberboard experiences in K-Area Complex (KAC), these models allow development of service life predictions. KAC completed calculations that supported extending the service life of 9975 packages with 3013 and non3013 containers in storage from 15 years to 20 years. These calculations addressed the potential for degraded fiberboard properties following 20 years in storage using degradation models developed previously. The updated degradation models developed in this report have been compared to the assumptions in these calculations, and the current results for fiberboard dimensions, density, radial thermal conductivity, and energy absorption remain consistent with those calculations. The axial thermal conductivity degradation rate slightly exceeds calculations estimate of 0.5% per year between 130 and 160 °F. Additional data will continue to be collected to permit future refinements to the models and assumptions. Some of the predicted degradation rates presented in this report are extreme. However, these relate to environments that do not exist within KAC or would be postulated only as upset conditions that would not likely persist for an extended period. For a typical package stored in KAC with approximately 10-12 watts internal heat load or less, and ambient temperatures below 90 ºF, the fiberboard assemblies experience storage conditions less severe than any of the aging environments. Fiberboard in conforming packages with lower internal heat loads should experience little or no degradation and is expected to provide a service life beyond the currently approved 20 year storage period. Packages with higher internal heat loads may not continue to perform their required safety functions beyond 20 years. Ultimately, service life will be determined by the cumulative effect of degradation from all the conditions these packages might encounter. The results and model predictions presented in this report are applicable to 9975 packages with cane or softwood fiberboard overpack assemblies. These degradation models do not address the effects of nonconforming conditions such as the presence of excess moisture and mold or beetle infestations.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS2010

System for Packaging Planetary Samples for Return to Earth

A system is proposed for packaging material samples on a remote planet (especially Mars) in sealed sample tubes in preparation for later return to Earth. The sample tubes (Figure 1) would comprise (1) tubes initially having open tops and closed bottoms; (2) small, bellows-like collapsible bodies inside the tubes at their bottoms; and (3) plugs to be eventually used to close the tops of the tubes. The top inner surface of each tube would be coated with solder. The side of each plug, which would fit snugly into a tube, would feature a solder-filled ring groove. The system would include equipment for storing, manipulating, filling, and sealing the tubes. The containerization system (see Figure 2) will be organized in stations and will include: the storage station, the loading station, and the heating station. These stations can be structured in circular or linear pattern to minimize the manipulator complexity, allowing for compact design and mass efficiency. The manipulation of the sample tube between stations is done by a simple manipulator arm. The storage station contains the unloaded sample tubes and the plugs before sealing as well as the sealed sample tubes with samples after loading and sealing. The chambers at the storage station also allow for plug insertion into the sample tube. At the loading station the sample is poured or inserted into the sample tube and then the tube is topped off. At the heating station the plug is heated so the solder ring melts and seals the plug to the sample tube. The process is performed as follows: Each tube is filled or slightly overfilled with sample material and the excess sample material is wiped off the top. Then, the plug is inserted into the top section of the tube packing the sample material against the collapsible bellowslike body allowing the accommodation of the sample volume. The plug and the top of the tube are heated momentarily to melt the solder in order to seal the tube.

Badescu, Mircea↗
DOE OSTI2020

Oxygen Atom Transfer as an Alternative Pathway for Oxygen–Oxygen Bond Formation

Fundamental understanding of catalytic mechanisms of water oxidation is a prerequisite for the design and development of efficient and rugged water oxidation catalysts. In this work, a detailed mechanistic study of the water oxidation mechanism of the [Ru II (npm)(4-pic) 2 (H 2 O)] 2+ (npm = 4-t-butyl-2,6-di(1',8'-naphthyrid-2'-yl)-pyridine, pic = 4-picoline) complex, [Ru II –OH 2 ] 2+ , reveals oxygen atom transfer from highly reactive ruthenium oxo intermediates to noncoordinating nitrogen atoms of the ligand as a novel route for oxygen evolution via storage of oxidizing equivalents as N-oxide groups on the ligand framework. Theoretical calculations show that the initial complex, [RuII–OH 2 ] 2+ , is transformed to a di-N-oxide [Ru II –OH 2 ,(-NO) 2 ] 2+ complex upon oxidation via facile OAT steps from Ru V =O species and that [Ru V =O,(-NO) 2 ] 3+ represents the most likely reactive species for the critical O–O bond formation. Furthermore, a new stepwise mechanism for oxygen evolution is introduced, which proceeds via coupling of Ru–O and N–O moieties producing a peroxide intermediate, [Ru V –OO–N,(-NO)] 3+ , and can compete with the water nucleophilic attack pathway for the oxygen evolution reaction. In this mechanism, a water molecule is oxidatively activated to an “oxygen atom” which is “stored” at a noncoordinating pyridine. Oxidative activation of a second water molecule, facilitated by coordination expansion of the intermediate N-oxide, generates the second oxygen atom required to produce a dioxygen molecule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Graphene Activated Magnesium Diboride for Moderate Pressure and Temperature Hydrogenation to Magnesium Borohydride

The hydrogenation conditions of magnesium diboride (MgB2) to magnesium borohydride (Mg(BH4)2) can be significantly enhanced through the discovery of improved modifiers. This study demonstrates that the modification of MgB2 by mechanical milling with graphene nanoplatelets significantly reduces the hydrogenation conditions of MgB2 from 900 bar and 400 degrees C for pure MgB2 to 400 bar and 300 degrees C while achieving 77% conversion to Mg(BH4)2. The introduction of the graphene additives coupled with milling leads to a reduction of the temperature and pressure required for bulk hydrogenation by 100 degrees C and 500 bar, respectively, from that of pure MgB2. The identification of graphene additives that drastically improve the hydrogenation conditions of MgB2 represents an important step toward improving hydrogen uptake kinetics to Mg(BH4)2.

complex hydrides↗
DOE OSTI2025

On-the-fly data set combinations with RNTuple

With the expected data volume increase for HL-LHC and the even more complex computing challenges set by future colliders, the need for efficient data storage and processing becomes more pressing. ROOT’s next-generation data format and I/O subsystem, RNTTuple, is designed to address these challenges. RNTTuple already demonstrates a clear improvement in storage and I/O efficiency, as well as overall stability and robustness with respect to its predecessor, TTTree. These improvements provide a solid baseline to introduce novel extensions to common high-energy and nuclear physics (HENP) workflows. Notably, many workflows could benefit from the ability to arbitrarily join and chain data set samples at runtime, which could reduce overall storage requirements and improve application runtime and ergonomics. In this paper, we present the RNTupleProcessor, which enables HENP data set combinations with RNTuple. We will discuss the main design considerations, present the interfaces to support data set combinations and show how they integrate in typical workflows.

de Geus, Florine Willemijn [CERN; Twente U., Ensch↗
DOE OSTI2021

Angstrom-Resolved Interfacial Structure in Buried Organic-Inorganic Junctions

Charge transport processes at interfaces which are governed by complex interfacial electronic structure play a crucial role in catalytic reactions, energy storage, photovoltaics, and many biological processes. Here, the first soft X-ray second harmonic generation (SXR-SHG) interfacial spectrum of a buried interface (boron/Parylene-N) is reported. SXR-SHG shows distinct spectral features that are not observed in X-ray absorption spectra, demonstrating its extraordinary interfacial sensitivity. Comparison to electronic structure calculations indicates a boron-organic separation distance of 1.9 {\AA}, wherein changes as small as 0.1 {\AA} result in easily detectable SXR-SHG spectral shifts (ca. 100s of meV). As SXR-SHG is inherently ultrafast and sensitive to individual atomic layers, it creates the possibility to study a variety of interfacial processes, e.g. catalysis, with ultrafast time resolution and bond specificity.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Tracking copper nanofiller evolution in polysiloxane during processing into SiOC ceramic

Polymer-derived ceramics (PDCs) remain at the forefront of research for a variety of applications including ultra-high-temperature ceramics, energy storage and functional coatings. Despite their wide use, questions remain about the complex structural transition from polymer to ceramic and how local structure influences the final microstructure and resulting properties. This is further complicated when nanofillers are introduced to tailor structural and functional properties, as nanoparticle surfaces can interact with the matrix and influence the resulting structure. The inclusion of crystalline nanofiller produces a mixed crystalline–amorphous composite, which poses characterization challenges. With this study, we aim to address these challenges with a local-scale structural study that probes changes in a polysiloxane matrix with incorporated copper nanofiller. Composites were processed at three unique temperatures to capture mixing, pyrolysis and initial crystallization stages for the pre-ceramic polymer. We observed the evolution of the nanofiller with electron microscopy and applied synchrotron X-ray diffraction with differential pair distribution function (d-PDF) analysis to monitor changes in the matrix's local structure and interactions with the nanofiller. The application of the d-PDF to PDC materials is novel and informs future studies to understand interfacial interactions between nanofiller and matrix throughout PDC processing.

Chemistry↗
DOE OSTI2023

Interface-enhanced conductivities in surfactant-mediated, solution-grown ionic crystalline complexes

Renewable energy is increasingly relying on optimized electrolytes and interfaces. In this work, Tween 20 and sodium chloride are selected as a model system to reveal the effects of surfactants on salt crystallization in the context of ionic conductivity and interface optimization. At a varied crystallization speed and mix ratio, it is demonstrated that the resultant solution-grown ionic crystalline complexes can achieve a highly tunable ion transport with a controllable crystalline interface. X-ray diffraction results rule out the possibility of polymorphism in the NaCl/Tween 20 systems, which further supports the importance of an optimized crystalline network for optimizing permittivity or ionic conductivity. Raman mapping and machine learning techniques are used to perform semantic segmentation on highly heterogeneous NaCl/Tween 20 complexes. Furthermore, FTIR measurements demonstrate that inter- and intra-molecular interactions play critical roles in the formation of these crystals. This work lays a foundation toward future optimization of such complex ion systems for a specific salt or crystallization modifier in energy storage or ion transport applications.

36 MATERIALS SCIENCE↗
NASA NTRS1984

A solution of Mx(double dot) + Cx(dot) + Kx = 0 applicable to the design of active dampers

A solution is presented for the equations of motion for the damped linear oscillator, Mx(double dot) + Cx(dot) + Kx = 0. The algorithm solves a transformed set of equations in terms of the modal variables of the undamped system and, at the same time, solves the adjoint equation of the transformed problem. The adjoint solution is normalized to give the inverse of the solution matrix of the transformed problem. The normalized inverse is useful in design for direct computation of sensitivity derivatives of damping ratios with respect to damping rates. The algorithm is programmed to reduce storage requirements by a factor of three-fourths compared to standard complex eigenvalue subroutines. A numerical example is included.

Thurston, G. A.↗
NASA NTRS1987

Advanced solar receiver conceptual design study

High temperature solar dynamic Brayton and Stirling receivers are investigated as candidate electrical power generating systems for future LEO missions. These receivers are smaller and more efficient than conventional receivers, and they offer less structural complexity and fewer thermal stress problems. Use of the advanced Direct Absorption Storage Receiver allows many of the problems associated with working with high-volumetric-change phase-change materials to be avoided. A specific mass reduction of about 1/3 with respect to the baseline receiver has been realized.

Kesseli, J. B.↗
DOE OSTI2024

IBR Digital Supply Chain Gap Analysis and Recommendations

The adoption of clean energy technologies, including solar photovoltaics, continues to introduce non-traditional stakeholders to the operations and planning of the electric system. Stakeholders such as manufacturers, vendors, owners, aggregators, and others are enabling the adoption, integration, and optimum operations of solar technologies at accelerated rates. Inverters form the foundation of many digitally controlled energy sources for clean energy technologies, including Solar, Battery Energy Storage Systems, Hybrid Systems, and Hydrogen Fuel Cells. Their supply chain is complex, a series of microchips, electronic switches and other components making up its primary functions. The complexity of this space and the growing digitization associated with these components can create supply chain cyber risks. One measure to mitigate cybersecurity attacks is proper digital supply chain security. The U.S. Department of Energy (DOE) Solar Energy Technologies Office (SETO), in partnership with the Cybersecurity, Energy, Security, and Emergency Response (CESER) office, is hosting a workshop to bring together solar vendors and services providers to discuss digital supply chain security for solar systems and challenges and opportunities in the transitioning to a fully domestic supply chain for solar energy in the U.S. This workshop will support the Securing Solar for the Grid (S2G) and Energy Cyber Sense program activities. During the workshop, industry experts and researchers from DOE National Laboratories will discuss the current solar supply chain landscape and the transition to domestic manufacturing of solar components in the U.S. Tools and techniques to better manage and secure the digital supply chain of solar devices and systems will be discussed.

cybersecurity↗