Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Enhanced Carbon Capture Behavior of Carbon Fibers via Ionic Liquid Modification

Carbon-based materials are widely deployed in carbon capture but are only limited to physisorption procedures. Further extending functionalized carbon materials to CO 2 chemisorption under low CO 2 concentration is highly desirable yet challenging. In this study, a carbon fiber composed of solely ultra-micropores (~0.45 nm) was deployed as the precursor to avoid the pore blocking effect, which was modified by superbase-derived ionic liquids (ILs) containing strong interaction sites with CO 2 . By forming a thin coating layer on the surface, the as-afforded surface-functionalized fiber materials demonstrated enhanced CO 2 uptake capacity and improved CO 2 sorption kinetics, as evaluated by both the volumetric method and thermogravimetric analysis, as well as the calculated energy distribution curves. The achievements made in this work provide guidance on the functionalization of carbon-based materials towards enhanced CO 2 chemisorption by forming a thin layer of selected IL coating.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Molecular‐Level Insight into the Chlorofluorocarbons Adsorption by Defective Covalent Organic Polymers

Abstract Halocarbons have important industrial applications, but because of their contribution to global warming and the fact that they can cause ozone depletion, they are considered highly toxic. Hence, the techniques that can capture and recover the used halocarbons with energy‐efficient methods have been recently received greater attention. In this contribution, we report the capture of dichlorodifluoromethane (R12), which has high global warming and ozone depletion potential, using covalent organic polymers (COPs). The defect‐engineered COPs were synthesized and demonstrated outstanding sorption capacities, ~226 wt % of R12 combined with linear‐shaped adsorption isotherms. We further identified the plausible microscopic adsorption mechanism of the investigated COPs via grand canonical Monte Carlo simulations applied to non‐defective and a collection of atomistic models of the defective COPs. The modeling work suggests that significant R12 adsorption performance is attributed to a gradual increment of porosities due to isolated/interconnected micro‐/meso‐pore channels and the change of the long‐range ordering of both COPs. The successive hierarchical‐pore‐filling mechanism promotes R12 molecular adsorption via moderate van der Waals adsorbate‐adsorbent interactions in the micropores of both COPs at low pressure followed by adsorbate‐adsorbate interactions in the extra‐voids created at moderate to high pressure ranges. This continuous pore‐filling mechanism makes defective COPs as promising sorbents for halocarbon adsorption.

Shen, Jian↗
DOE OSTI2024

Unlocking High Capacity and Reversible Alkaline Iron Redox Using Silicate-Sodium Hydroxide Hybrid Electrolytes

Alkaline iron (Fe) batteries are attractive due to the high abundance, low cost, and multiple valent states of Fe but show limited columbic efficiency and storage capacity when forming electrochemically inert Fe 3 O 4 on discharging and parasitic H 2 on charging. Herein, sodium silicate is found to promote Fe(OH) 2 /FeOOH against Fe(OH) 2 /Fe 3 O 4 conversions. Electrochemical experiments, operando X-ray characterization, and atomistic simulations reveal that improved Fe(OH) 2 /FeOOH conversion originates from (i) strong interaction between sodium silicate and iron oxide and (ii) silicate-induced strengthening of hydrogen-bond networks in electrolytes that inhibits water transport. Furthermore, the silicate additive suppresses hydrogen evolution by impairing energetics of water dissociation and hydroxyl de-sorption on iron surfaces. In conclusion, this new silicate-assisted redox chemistry mitigates H 2 and Fe 3 O 4 formation, improving storage capacity (199 mAh g -1 in half-cells) and coulombic efficiency (94 % after 400 full-cell cycles), paving a path to realizing green battery systems built from earth-abundant materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Underlying Roles of Polyol Additives in Promoting CO2 Capture in PEI/Silica Adsorbents

Solid-supported amines having low molecular weight branched poly(ethylenimine) (PEI) physically impregnated into porous solid supports are promising adsorbents for CO2 capture. Co-impregnating short-chain poly(ethylene glycol) (PEG) together with PEI alters the performance of the adsorbent, delivering improved amine efficiency (AE, mol CO2 sorbed / mol N) and faster CO2 uptake rates. To uncover the physical basis for this improved gas capture performance, we probed the distribution and mobility of the polymers in the pores via small angle neutron scattering (SANS), solid-state NMR, and molecular dynamic (MD) simulation studies. SANS and MD simulations reveal that PEG displaces wall-bound PEI, making amines more accessible for CO2 sorption. Solid-state NMR and MD simulation suggest intercalation of PEG into PEI domains, separating PEI domains and reducing amine-amine interactions, providing potential PEG-rich and amine-poor interfacial domains that bind CO2 weakly via physisorption while providing facile pathways for CO2 diffusion. Contrary to a prior literature hypothesis, no evidence is obtained for PEG facilitating PEI mobility in solid supports. Instead, the data suggest that PEG chains coordinate to PEI, form larger bodies with reduced mobility compared to PEI alone. We also demonstrate promising CO2 uptake and desorption kinetics at varied temperatures, given by favorable amine distribution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Effects of different pretreatment methods on the drying characteristics and quality of potatoes

Abstract The effects of different pretreatments on the vitamin C content of peeled fresh potato, the drying characteristics, and several quality attributes of dehydrated potatoes were investigated. Citric acid pretreatment (0.1%–0.3%, 10–30 min), steam blanching (100ºC, 1–2 min), and water blanching (95°C, 1–2 min) were found to have no obvious effect on the drying rate of potatoes, whereas temperature was the main influencing factor. In terms of quality of dehydrated diced potato, 20 min of citric acid pretreatment resulted in the highest vitamin C retention and better color. Furthermore, dehydrated potato pretreated with citric acid all showed similar dynamic moisture adsorption curves, namely type II sorption isotherm. The moisture adsorption curves can be well fitted using the Guggenheim–Anderson–deBoer model with R 2 higher than .97.

Sun, Xiangfeng↗
DOE OSTI2020

Permeation of CO 2 and N 2 through glassy poly(dimethyl phenylene) oxide under steady- and presteady-state conditions

Glassy polymers are often used for gas separations because of their high selectivity. Although the dual-mode permeation model correctly fits their sorption and permeation isotherms, its physical interpretation is disputed, and it does not describe permeation far from steady state, a condition expected when separations involve intermittent renewable energy sources. To develop a more comprehensive permeation model, we combine experiment, molecular dynamics, and multiscale reaction–diffusion modeling to characterize the time-dependent permeation of N 2 and CO 2 through a glassy poly(dimethyl phenylene oxide) membrane, a model system. Simulations of experimental time-dependent permeation data for both gases in the presteady-state and steady-state regimes show that both single- and dual-mode reaction–diffusion models reproduce the experimental observations, and that sorbed gas concentrations lag the external pressure rise. The results point to environment-sensitive diffusion coefficients as a vital characteristic of transport in glassy polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Layers Can Be Deceiving: A Hopping Model for Small Molecule Diffusion in TATB Crystal

Sorption of small molecule gases in materials can play a significant role in their long‐term stability and compatibility within multi‐material assemblies. While many material properties of the insensitive high explosive TATB (1,3,5‐triamino‐2,4,6‐trinitrobenzene) are well understood, very little is known regarding its permeability to gases. TATB crystal exhibits a graphitic‐like layered packing structure that evokes a mental schema in which the layers form nanoscopic channels, but it is unclear whether this structure promotes gas transport. Here, we use molecular dynamics (MD) simulations to predict transport of small molecules through TATB single crystal. An approach to fit classical force fields is developed to model TATB interactions with H 2 O, He, Ne, and Ar, which is then combined with steered MD to probe gas transport along selected directions in the crystal. We find that small molecule transport occurs via a hopping mechanism that exhibits distinct jumps between interstitial sites and is substantially faster normal to the layers as compared to through them. This result stems from the finding that intralayer junctions between adjacent TATB molecules are the most stable interstitial sites and that energetic barriers are lower for hopping between adjacent layers. An empirical model for diffusion rate based on the MD data shows that the rate decays exponentially with increasing molecular radius and is negligibly small for all molecules larger than He, including common atmospheric gases. These findings have implications for the interpretation of experiments that measure surface area, material response to extreme conditions, and are expected to help constrain models for material aging.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Moisture ingress in commercial steel drums: Water content determination, diffusion modelling and predicted permeation rates

Commercial steel drums underpin the global economy, playing a pivotal role in the storage and transportation of critical materials. Transported and stored materials, such as food, chemical and nuclear waste, can be sensitive to ambient conditions, particularly moisture that can enhance negative effects such as corrosion and material degradation. Although international standards and regulations are in place for the qualification of steel drums, there are no current testing requirements, established limits or boundaries for the permeation of moisture into the drums during transportation or storage. This work aims to provide insights into the moisture ingress over time into properly sealed steel drums and provides estimated moisture ingress rates over time through extrapolation. Water vapour transmission rate (WVTR) measurements through the gasket material at 10–40°C were 0.11–2.1 g/m 2 /day resulting in a permeation activation energy of 30.2 kJ/mol. Water sorption measurements and Karl Fischer titration (KFT) on ethylene propylene diene monomer (EPDM) gasket material revealed a decrease in equilibrium moisture saturation with increasing temperature. KFT measurements also revealed the presence of moisture within the adhesive and drum wall after exposure to ambient conditions. KFT and Fourier transform infrared spectroscopy (FTIR) show that moisture will desorb from the EPDM and drum wall after exposure to desiccating conditions, although a minimal amount of moisture will remain present. When sealed to the manufacturer's recommendations, the steel drums are effective in minimizing moisture ingress. In conclusion, in sealed empty drums, moisture ingress rates for 19-L drums were 0.4–1.5 mg/day at 25°C 15% relative humidity (RH) and increased to 7.1–8.8 mg/day at 40°C 90% RH, and moisture ingress rates for 210-L drums were 2.5 and 3.5 mg/day at field deployment conditions of 15.5°C 51.5% RH and 23°C 40% RH, respectively.

42 ENGINEERING↗
DOE OSTI2022

Fast redox switches lead to rapid transformation of goethite in humid tropical soils: A Mössbauer spectroscopy study

Abstract Humid tropical forest soils experience frequent rainfall, which limits oxygen diffusion and creates redox heterogeneity in upland soils. In this study we gauged the effect of short‐term anoxic conditions on Fe mineralogy of relatively Fe‐ and C‐rich surface soils (C/Fe mole ratio ∼5) from a humid tropical forest in Puerto Rico. Soils subjected to 4‐d oxic/anoxic oscillation were characterized by selective chemical extractions, Mössbauer spectroscopy (MBS), and X‐ray diffraction. Chemical extraction data suggested that rapidly switching redox conditions had subtle effects on bulk Fe mineralogy. Mössbauer, on the other hand, indicated that (a) the soil Fe is a mixture of goethites of varying characteristics with minor contributions from ferrihydrite (<5%) and Fe(III)‐organic matter (OM) phases (∼10%), and (b) anoxic conditions rapidly transformed all forms of goethite to relatively stable Fe oxides. Such fast changes in goethite features could be due to rapid depletion and sorption of bio‐released structural Al or sorbed OM onto residual soil components. The rapid temporal changes in MBS parameters and corresponding pore water nominal oxidation state of C values suggest that Fe‐C transformations in these upland tropical soils are complex and intricately coupled. A comprehensive understanding of the fate of Fe, Al, and OM (Fe‐organic moieties) during redox switches and concurrent changes in pore water chemistry is critical for development of robust transport models in humid tropical soils, which are subject to episodic low‐redox events.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Tunable Metal–Organic Frameworks Based on 8-Connected Metal Trimers for High Ethane Uptake

Metal trimers [M 3 (O/OH)](OOCR) 6 are among the most important structural building blocks. From these trimers, a great success has been achieved in the design of 6- or 9-connected framework materials with various topological features and outstanding gas-sorption properties. In comparison, 8-connected trimer-based MOFs are rare. Given multiple competitive pathways for the formation of 6- or 9-connected frameworks, it remains challenging to identify synthetic or structural parameters that can be used to direct self-assembly process towards trimer-based 8-connected materials. Here, we reveal a viable strategy called angle bending modulation for creating a prototypical MOF type based on 8-connected M 3 (OH)(OOCR) 5 (Py-R) 3 trimers, M = Zn, Co, Fe). As a proof of concept, we synthesized six members in this family using three types of ligands (CPM-80, -81, and -82). These materials do not possess open-metal sites and show excellent uptake capacity for various hydrocarbon gas molecules and inverse C 2 H 6 /C 2 H 4 selectivity. CPM-81-Co, made from 2,5-furandicarboxylate and isonicotinate, features selectivity of 1.80 with high uptake capacity for ethane (123 cm 3 /g -1 ) and ethylene (113 cm 3 /g -1 ) at 298 K and 1 bar.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Sequential Separation of Linear, Mono–, and Di–Branched Hexane Isomers on a Robust Coordination Polymer with Nonbonding Flexibility

Efficient separation of hexane isomers is a crucial process for upgrading gasoline. Herein, the sequential separation of linear, mono-, and di-branched hexane isomers by a robust stacked 1D coordination polymer termed as Mn-dhbq ([Mn(dhbq)(H 2 O) 2 ], H 2 dhbq = 2,5-dihydroxy-1,4-benzoquinone) is reported. The interchain space of the activated polymer is of optimal aperture size (5.58 Å) that could exclude 2,3-dimethylbutane, while the chain structure can discriminate n-hexane with high capacity (1.53 mmol g –1 at 393 K, 6.67 kPa) by high-density open metal sites (5.18 mmol g –1 ). With the temperature- and adsorbate-dependent swelling of interchain spaces, the affinity between 3-methylpentane and Mn-dhbq can be deliberately controlled from sorption to exclusion, and thus a complete separation of ternary mixture can be achieved. Column breakthrough experiments confirm the excellent separation performance of Mn-dhbq. Furthermore, the ultrahigh stability and easy scalability further highlight the application prospect of Mn-dhbq for separation of hexane isomers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Multi–Modular Design of Stable Pore–Space–Partitioned Metal–Organic Frameworks for Gas Separation Applications

Pore space partition (PSP) is an effective materials design method for developing high-performance small-pore materials for storage and separation of gas molecules. The continued success of PSP depends on broad availability and judicious choice of pore-partition ligands and better understanding of each structural module on stability and sorption properties. Here, by using substructural bioisosteric strategy (sub-BIS), a dramatic expansion of pore-partitioned materials is targeted by using ditopic dipyridyl ligands with non-aromatic cores or extenders, as well as by expanding heterometallic clusters to uncommon nickel–vanadium and nickel–indium clusters rarely known before in porous materials. The dual-module iterative refinement of pore-partition ligands and trimers leads to remarkable enhancement of chemical stability and porosity. Here a family of 23 pore-partitioned materials synthesized from five pore-partition ligands and seven types of trimeric clusters is reported. New materials with such compositionally and structurally diverse framework modules reveal key factors that dictate stability, porosity, and gas separation properties. Among these, materials based on heterometallic vanadium–nickel trimeric clusters give rise to the highest long-term hydrolytic stability and remarkable uptake capacity for CO 2 , C 2 H 2 /C 2 H 4 /C 2 H 6 , and C 3 H 6 /C 3 H 8 hydrocarbon gases. Here, the breakthrough experiment shows the potential application of new materials for separating gas mixtures such as C 2 H 2 /CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Neutron imaging of hydrogenous gases in porous-carbon materials around phase transitions

Focus herein is on hydrogenous gases interacting with porous-carbon materials on activated biochar at pressures ranging from 0 to 100 bar and temperatures from room (ambient) to cryogenic. Neutron radiography was conducted using a custom-made cell system to simultaneously image pure gas and gas interacting with the porous carbon. From neutron attenuation, the cross sections of methane and ethane and number concentrations were determined for different pressures and temperatures and compared with corresponding reference data. Sorption properties of the porous materials were investigated in situ with methane, ethane, and propane.

Ossler, Frederik [Lund University, Sweden]↗
DOE OSTI2023

Evaluation of two extraction chromatography resins for scandium and titanium separation for medical isotope production

Scandium-47 ( 47 Sc) can be used in nuclear medicine as a therapeutic-diagnostic, or "theragnostic," radioactive medical isotope for cancer detection and treatment. The 47 Sc isotope can be produced through the photonuclear reaction 48 Ti(γ,p) 47 Sc by irradiating enriched 48 Ti target material. The enriched target material necessary for production is costly; 48 TiO 2 costs ~ $\$$1550/g, and targets can be > 50 g ($\$$77,500) to produce medically relevant amounts of 47 Sc. In order to keep costs low, a highly efficient separation of scandium from bulk titanium is desired, along with efficient methods for recycling the target material. Here this research is focused on evaluating efficient methods for the separation of scandium from bulk quantities of titanium using commercially available diglycolamide-based and hydroxamate-based extraction chromatography resins (DGA resin and ZR resin, respectively). The sorption of 47 Sc and Ti on these resins were investigated at varying concentrations of HNO 3 , HCl, H 2 SO 4 , and HF to explore how they might be used in a large-scale production/processing setting.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Interaction of Soil Microbes with Organoclays and their Impact on the Immobilization of Hg under Aerobic Conditions

Immobilization of mercury (Hg) leaching from bank soils of East Fork Poplar Creek (EFPC) is considered part of remediation strategies to mitigate the amount of Hg entering the creek. Different approaches are currently being evaluated, such as utilizing engineered sorbents to immobilize Hg species in EFPC bank soils. However, the influence of environmental microbes on the immobilization of Hg by sorbents is unknown. Organocation-modified phyllosilicate clay minerals (organoclays) are widely used as sorbents for the immobilization of contaminants. This study evaluates the interactions of Serratia marcescens and Burkholderia thailandensis with the sorbent Organoclay PM-199 and their impact on the immobilization of Hg under aerobic conditions. We evaluated the competitive binding of Hg between sorbents and selected microorganisms in a series of pure culture studies using bacterial strains identified in EFPC bank soil samples. Our results suggest that Hg sorption by Organoclay PM-199 is not significantly impacted by common soil bacteria present in EFPC, specifically Serratia marcescens and Burkholderia thailandensis, which are known to form biofilms. These findings suggest that sorbent amendments are an effective strategy for the remediation of Hg contamination in natural ecosystems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Selective Pb 2+ removal and electrochemical regeneration of fresh and recycled FeOOH

Heavy metal pollution is a key environmental problem. Selectively extracting heavy metals could accomplish water purification and resource recycling simultaneously. Adsorption is a promising approach with a facile process, adaptability for the broad concentration of feed water, and high selectivity. However, the adsorption method faces challenges in synthesizing high-performance sorbents and regenerating adsorbents effectively. FeOOH is an environmentally friendly sorbent with low-cost production on a large scale. Nevertheless, the selectivity behavior and regeneration of FeOOH are seldom studied. Therefore, we investigated the selectivity of FeOOH in a mixed solution of Co 2+ , Ni 2+ , and Pb 2+ and proposed to enhance the capacity of FeOOH and regenerate it by using external charges. Without charge, the FeOOH electrode shows a Pb 2+ uptake capacity of 20 mg/g. After applying a voltage of –0.2/+0.8 V, the uptake capacity increases to a maximum of 42 mg/g and the desorption ratio is 70%–80%. In 35 cycles, FeOOH shows a superior selectivity towards Pb 2+ compared with Co 2+ and Ni 2+ , with a purity of 97% ± 3% in the extracts. The high selectivity is attributed to the lower activation energy for Pb 2+ sorption. The capacity retentions at the 5 th and the 35 th cycles are ca. 80% and ca. 50%, respectively, comparable to the chemical regeneration method. With industrially exhausted granular ferric hydroxide as the electrode material, the system exhibits a Pb 2+ uptake capacity of 37.4 mg/g with high selectivity. Our work demonstrates the feasibility of regenerating FeOOH by charge and provides a new approach for recycling and upcycling FeOOH sorbent.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Chapter 10.02 - Neutron Scattering Studies of Materials for Hydrogen Storage

Hydrogen storage presents a significant barrier to the widespread adaptation of hydrogen as an energy source in mobile and stationary applications. The development of new candidate hydrogen storage materials is therefore an outstanding goal in the field of inorganic chemistry. Neutron scattering techniques - including diffraction, inelastic, and quasielastic scattering - are integral in investigating these materials. Here, we review some of the key studies of candidate hydrogen storage materials which have employed neutron scattering techniques. We begin with a brief discussion of hydrogen's current position in the global energy landscape. Next, we provide a brief description of the theory and practical aspects of the neutron scattering techniques germane to the study of hydrogen storage. Then we enumerate the neutron scattering studies of candidate hydrogen storage materials, including metal hydrides, chemical hydrides, and porous compounds. We focus on the studies which helped develop our understanding of hydrogen storage by revealing the underlying fundamental physics and chemistry of hydrogen sorption in these systems. Finally, we provide an outlook to the future of hydrogen storage research.

chemical hydrides↗