Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solar integration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Solar heating system installed at Blakedale Professional Center, Greenwood, South Carolina

Information on the solar heating system installed at the Blakedale Professional Center, in Greenwood, South Carolina is presented. The information consists of site and building description, solar system description, performance evaluation, system problems and installation drawings. The solar system was designed to provide approximately 85 percent of the building's heating requirements. The system was installed concurrently with building construction and heats 4,440 square feet of the building. There are 954 square feet of liquid flat plate collectors that are proof-mounted and have a drain-down system to protect the collectors from freezing. A 5,000 gallon steel, polyurethane insulated tank buried underground provides storage. The system was fully instrumented for performance evaluation and integrated into the National Solar Data Network.

Source record↗
NASA NTRS2007

Efforts to Simulate Solar Wind Turbulence

A three-dimensional integration of the MHD equations in spherical coordinates has been developed that attempts to simulate a variety of solar wind conditions. These include the interaction of Alfven wave packets and the development of a turbulent cascade, the role of the heliospheric current sheet, the role of quasi-two-dimensional fluctuations in determining how magnetic field lines meander throughout the heliosphere, and the role of interstellar pickup ions in perturbing the solar wind in the outer heliosphere.

Goldstein, Melvyn L.↗
NASA NTRS1994

Future NASA plans for exobiology and solar system exploration

The prominence of exobiology as a part of the NASA program in solar system exploration reached its peak during the Viking missions of the mid-1970's. Even before those missions were finished, the Exobiology Program had been transferred out of the Division responsible for solar system exploration, and many of the direct ties to future missions became more difficult to make, providing a bureaucratic impediment to the conduct of exobiology research in space. Early in 1993, the Exobiology Program was brought back in to the Solar System Exploration Division, as an integral part of NASA's program to study this and other solar systems. As such, the Program stands to gain from an overall broad investment in missions that will study Mars, small bodies such as asteroids and comets, and outer planetary bodies such as Saturn, Titan, and even Pluto. Additional opportunities may be forthcoming on the Moon and elsewhere in Earth-orbit. Ground-based studies will continue to be an important foundation for work in space, while additional effects will be continue to use ground-based astronomical instruments to study other planetary systems, and to search for life on planets around other stars. This paper provides a current planning and budgetary prospectus on the future of Exobiology in NASA.

Rummel, John D.↗
NASA NTRS1998

Thermal State-of-Charge in Solar Heat Receivers

A theoretical framework is developed to determine the so-called thermal state-of-charge (SOC) in solar heat receivers employing encapsulated phase change materials (PCMS) that undergo cyclic melting and freezing. The present problem is relevant to space solar dynamic power systems that would typically operate in low-Earth-orbit (LEO). The solar heat receiver is integrated into a closed-cycle Brayton engine that produces electric power during sunlight and eclipse periods of the orbit cycle. The concepts of available power and virtual source temperature, both on a finite-time basis, are used as the basis for determining the SOC. Analytic expressions for the available power crossing the aperture plane of the receiver, available power stored in the receiver, and available power delivered to the working fluid are derived, all of which are related to the SOC through measurable parameters. Lower and upper bounds on the SOC are proposed in order to delineate absolute limiting cases for a range of input parameters (orbital, geometric, etc.). SOC characterization is also performed in the subcooled, two-phase, and superheat regimes. Finally, a previously-developed physical and numerical model of the solar heat receiver component of NASA Lewis Research Center's Ground Test Demonstration (GTD) system is used in order to predict the SOC as a function of measurable parameters.

Hall, Carsie A., Jr.↗
NASA NTRS1998

Thermal State-of-Charge in Solar Heat Receivers

A theoretical framework is developed to determine the so-called thermal state-of-charge (SOC) in solar heat receivers employing encapsulated phase change materials (PCMS) that undergo cyclic melting and freezing. The present problem is relevant to space solar dynamic power systems that would typically operate in low-Earth-orbit (LEO). The solar heat receiver is integrated into a closed-cycle Brayton engine that produces electric power during sunlight and eclipse periods of the orbit cycle. The concepts of available power and virtual source temperature, both on a finite-time basis, are used as the basis for determining the SOC. Analytic expressions for the available power crossing the aperture plane of the receiver, available power stored in the receiver, and available power delivered to the working fluid are derived, all of which are related to the SOC through measurable parameters. Lower and upper bounds on the SOC are proposed in order to delineate absolute limiting cases for a range of input parameters (orbital, geometric, etc.). SOC characterization is also performed in the subcooled, two-phase, and superheat regimes. Finally, a previously-developed physical and numerical model of the solar heat receiver component of NASA Lewis Research Center's Ground Test Demonstration (GTD) system is used in order to predict the SOC as a function of measurable parameters.

Hall, Carsie, A., III↗
NASA NTRS2014

LADEE UVS Observations of Solar Occultation by Exospheric Dust Above the Lunar Limb

The Lunar Atmosphere and Dust Environment Explorer (LADEE) is a lunar orbiter launched in September 2012 that investigates the composition and temporal variation of the tenuous lunar exosphere and dust environment. The primary goals of the mission are to characterize the pristine gas and dust exosphere prior to future lunar exploration activities, which may alter the lunar environment. To address this goal, the LADEE instrument suite includes an Ultraviolet/ Visible Spectrometer (UVS), which searches for dust, Na, K, and trace gases such as OH, H2O, Si, Al, Mg, Ca, Ti, Fe, as well as other previously undetected species. UVS has two sets of optics: a limb-viewing telescope, and a solar viewing telescope. The solar viewer is equipped with a diffuser (see Figure 1a) that allows UVS to stare directly at the solar disk as the Sun starts to set (or rise from) behind the lunar limb. Solar viewer measurements generally have very high signal to noise (SNR greater than 500) for 20-30 ms integration times. The 1-degree solar viewer field of view subtends a diameter of approximately 8 km at a distance of 400-450 km.

LADEE↗
NASA NTRS1988

Solution of an integral equation encountered in studies on radiative transfer in completely absorbing leaf canopies

The leaf normal distribution function is related to the extinction coefficient of direct solar radiation by a Fredholm integral equation of the first kind. The integral equation is solved by the method of constrained least squares. The solutions are stable and correct only in extreme cases and, in general, it is not possible to recover an arbitrary leaf normal distribution function.

Myneni, Ranga B.↗
NASA NTRS1982

Solar Hot Water for an Industrial Laundry--Fresno, California

Final report describes an integrated wastewater-heat recovery system and solar preheating system to supply part of hot-water requirements of an industrial laundry. Large retrofit solar-water-heating system uses lightweight collectors.

Source record↗
NASA NTRS1997

Operation of the 25kW NASA Lewis Research Center Solar Regenerative Fuel Cell Tested Facility

Assembly of the NASA Lewis Research Center(LeRC)Solar Regenerative Fuel Cell (RFC) Testbed Facility has been completed and system testing has proceeded. This facility includes the integration of two 25kW photovoltaic solar cell arrays, a 25kW proton exchange membrane (PEM) electrolysis unit, four 5kW PEM fuel cells, high pressure hydrogen and oxygen storage vessels, high purity water storage containers, and computer monitoring, control and data acquisition.

Solar Regenerative Fuel Cell electrolyzer↗
NASA NTRS1973

Plasma column changes at small solar elongations

The differenced range versus integrated Doppler (DRVID) technique was used to study charged particle changes in the ray path between earth and Mariner 9. For plasma activity near the sun, DRVID data were obtained from August 10 to October 24, 1972, surrounding the Mariner 9 superior conjunction on September 7. If the records are viewed in terms of range change or range change rate, the day-to-day fluctuations in these quantities mask the changes expected due to the varying solar elongation. Thus, while the steady-state total electron content varies by a factor of 4, the columnar content changes show no systematic variations.

Callahan, P. S.↗
NASA NTRS1972

Applications technology satellites advanced mission study

Three spacecraft configurations were designed for operation as a high powered synchronous communications satellite. Each spacecraft includes a 1 kw TWT and a 2 kw Klystron power amplifier feeding an antenna with multiple shaped beams. One of the spacecraft is designed to be boosted by a Thor-Delta launch vehicle and raised to synchronous orbit with electric propulsion. The other two are inserted into a elliptical transfer orbit with an Atlas Centaur and injected into final orbit with an apogee kick motor. Advanced technologies employed in the several configurations include tubes with multiple stage collectors radiating directly to space, multiple-contoured beam antennas, high voltage rollout solar cell arrays with integral power conditioning, electric propulsion for orbit raising and on-station attitude control and station-keeping, and liquid metal slip rings.

Gould, L. M.↗
NASA NTRS1973

A study of the compatibility of science instruments with the solar electric propulsion space vehicle

Electromagnetic interference and field-of-view constraints are identified as the areas of most concern to science on solar electric propulsion space vehicles. Several areas are indicated which more detailed data on the space vehicle environment are needed. In addition, possible means to attain or demonstrate science/space vehicle compatibility are recommended for further iteration between space vehicle design and science payload considerations. The space vehicle design developed by the solar electric propulsion system integration technology effort is used. Two payload sets for comet Encke missions (a slow flyby and a rendezvous), as well as several instruments which are not included in the two payload sets, are analyzed to determine requirements on the space vehicle imposed by the instruments in order to meet their objectives. Environmental requirements for the sets of instruments are developed and compared to both the SEPSIT design criteria and the environment as it is presently understood.

Parker, R. H.↗
NASA NTRS1980

Programable solar-energy controller

Report characterizes commerically developed solar-energy control IPECH (integrated programmable electronic controller and hydronic) subsystem, giving information used in evaluating its performance.

Source record↗