Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “route type”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Impact of Operating Context on the Use of Structure in Air Traffic Controller Cognitive Processes

This paper investigates the influence of structure on air traffic controllers cognitive processes in the TRACON, En Route, and Oceanic environments. Radar data and voice command analyses were conducted to support hypotheses generated through observations and interviews conducted at the various facilities. Three general types of structure-based abstractions (standard flows, groupings, and critical points) have been identified as being used in each context, though the details of their application varied in accordance with the constraints of the particular operational environment. Projection emerged as a key cognitive process aided by the structure-based abstractions, and there appears to be a significant difference between how time-based versus spatial-based projection is performed by controllers. It is recommended that consideration be given to the value provided by the structure-based abstractions to the controller as well as to maintain consistency between the type (time or spatial) of information support provided to the controller.

Davison, Hayley J.↗

A new high voltage alluaudite sodium battery insertion material

Large-scale stationary storage forms a key sector that can be economically served by sodium-ion batteries. In realizing practical sodium-ion batteries, discovery and development of novel cathodes is essential. In this spirit, alluaudite-type Na 2 Fe 2 (SO 4 ) 3 was reported in 2014 to have the highest Fe 3+ /Fe 2+ redox potential (~3.8 V vs. Na). This finding led to reports on various PO4 3– and SO4 2– based alluaudite compounds exhibiting high energy densities. In 2017, MoO 4 2– based alluaudite, Na 2.67 Mn 1.67 (MoO 4 ) 3 , was found as a 3.45 V cathode material. Exploring molybdenum chemistry further, this work reports alluaudite type Na 3.36 Co 1.32 (MoO 4 ) 3 (NCMo) as a novel versatile electroactive cathode for Li-ion and Na-ion batteries. It was synthesized by a wet solution-combustion route with a restricted annealing duration of 1 min at 600 °C. Calorimetric study revealed the formation enthalpy from component oxides (ΔH° f,ox = –575.49 ± 7.75 kJ/mol) to be highly exothermic. Unlike the sulfate class of alluaudites, this material is highly stable in air and moisture (ΔH ds = 537.42 ± 0.78 kJ/mol). Having an ionic conductivity of 6.065 × 10 –8 S/cm (at 50 °C), it offers a pseudo two-dimensional Na + migration pathway. Without any material optimization, NCMo was found to work as a high-voltage insertion cathode (ca. 4.0 V vs. Na/Na + and 4.1 V vs. Li/Li + ) in sync with theoretically predicted potential of 3.98 V (vs. Na/Na + ). Ex-situ X-ray diffraction and photoelectron spectroscopy studies revealed the occurrence of solid-solution redox mechanism solely involving Co 3+ /Co 2+ redox centre. Finally, it benchmarks Na 3.36 Co 1.32 (MoO 4 ) 3 as a novel electrochemically active Mo-based alluaudite-type polyanionic cathode insertion material.

25 ENERGY STORAGE↗

Center-TRACON Automation System (CTAS) En Route Trajectory Predictor Requirements and Capabilities

This requirements framework document is designed to support the capture of requirements and capabilities for state-of-the-art trajectory predictors (TPs). This framework has been developed to assist TP experts in capturing a clear, consistent, and cross-comparable set of requirements and capabilities. The goal is to capture capabilities (types of trajectories that can be built), functional requirements (including inputs and outputs), non-functional requirements (including prediction accuracy and computational performance), approaches for constraint relaxation, and input uncertainties. The sections of this framework are based on the Common Trajectory Predictor structure developed by the FAA/Eurocontrol Cooperative R&D Action Plan 16 Committee on Common Trajectory Prediction. It is assumed that the reader is familiar with the Common TP Structure.1 This initial draft is intended as a first cut capture of the En Route TS Capabilities and Requirements. As such, it contains many annotations indicating possible logic errors in the CTAS code or in the description provided. It is intended to work out the details of the annotations with NASA and to update this document at a later time.

framework↗

Type-II superconductivity at 9K in Pb–Bi alloy

In the present work, we report the synthesis of Pb–Bi alloy with enhanced Tc of up to 9K, which is higher than that of Pb. The alloy is synthesized via a solid-state reaction route in the vacuum-encapsulated quartz tube at 700°C in an automated furnace. The synthesized sample is characterized by X-ray Diffraction(XRD) and Energy dispersive X-ray analysis(EDAX) for its phase purity and elemental composition. Rietveld refinement of XRD reveals that the end product is a majority hexagonal Pb 7 Bi 3 , with minor rhombohedral Bi. The electronic transport measurement shows metallic behavior with the Debye temperature of 108K and a superconductivity transition temperature (T c ) below 9K, which is the maximum to date for any reported Pb–Bi alloy, Pb or Bi at ambient pressure. Partial substitution of Bi at the Pb site may modify the free density of electronic states within the BCS model to attain the optimum T c , which is higher by around 2K from the reported T c of Pb. The superconductor phase diagram derived from magneto-transport measurements reveals that the synthesized alloy is a conventional superconductor with an upper critical field (H c2 ) of 3.9 T, which lies well within the Pauli paramagnetic limit. The magnetization measurements carried out following ZFC(Zero Field Cool) protocols infer that the synthesized alloy is a bulk superconductor below 9K. The isothermal M-H(Magnetization vs. Field) measurements performed below T c establish it as a type-II superconductor. Furthermore, the specific heat capacity measurements show that the Pb–Bi alloy is a strongly coupled bulk superconductor below around 9K with possibly two superconducting gaps.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Time-Constrained Capacitated Vehicle Routing Problem in Urban E-Commerce Delivery

Electric vehicle routing problems can be particularly complex when recharging must be performed mid-route. In some applications, such as e-commerce parcel delivery truck routing, however, mid-route recharging may not be necessary because of constraints on vehicle capacities and the maximum allowed time for delivery. In this study, we develop a mixed-integer optimization model that exactly solves such a time-constrained capacitated vehicle routing problem, especially of interest for e-commerce parcel delivery vehicles. We compare our solution method with an existing metaheuristic and carry out exhaustive case studies considering four U.S. cities—Austin, TX; Bloomington, IL; Chicago, IL; and Detroit, MI—and two vehicle types: conventional vehicles and battery electric vehicles (BEVs). In these studies we examine the impact of vehicle capacity, maximum allowed travel time, service time (dwelling time to physically deliver the parcel), and BEV range on system-level performance metrics, including vehicle miles traveled (VMT). We find that the service time followed by the vehicle capacity plays a key role in the performance of our approach. We assume an 80-mi BEV range as a baseline without mid-route recharging. Our results show that the BEV range has a minimal impact on performance metrics because the VMT per vehicle averages around 72 mi. In a case study for shared-economy parcel deliveries, we observe that VMT could be reduced by 38.8% in Austin if service providers were to operate their distribution centers jointly.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Development and Characterization of a Novel Ti-Modified High-Si Medium-Mn Steel Possessing Ultra-High Strength and Reasonable Ductility After Hot Rolling

The present work systematically correlates the strength–ductility relationship of a Ti-Si-modified Fe-Mn-Al-C steel with its microstructural characteristics such as grain size, type and morphology of precipitates, and the transformation-induced plasticity (TRIP) effect during hot deformation. The Ti-Si-modified multicomponent steel developed through melting and casting route is subjected to thermo-mechanical processing such as hot forging (at 1373 K) and subsequent hot rolling (at 1173 K). An excellent combination of ultra-high tensile strength (UTS ~ 1700 ± 20 MPa), reasonable ductility (elongation ~ 11%) and high work hardening behavior (n ~ 0.89) is achieved in the hot-rolled specimen as compared to the hot-forged one (UTS ~ 824 ± 9 MPa, n ~ 0.07) with negligible change in the elongation. The better tensile properties of the hot-rolled specimen in contrast to the hot-forged one are due to the combined effects of grain refinement during rolling, twin–twin interactions, precipitation strengthening by mixture of hexagonal structured Ti{sub 3}(Al,Si)C{sub 2} and Mn-Al-Si-rich carbide precipitates and most significantly the enhanced TRIP effect. The lower critical resolved shear stress value of martensitic transformation instigates the TRIP effect during tensile testing which resulted in the increased hardness and strength of the hot-rolled specimen. The above observation offers a strong support to the proposition that TRIP effect is the dominant plasticity-enhancing mechanism activated during the deformation of the low-stacking fault energy (~ 12.2 mJ/m{sup 2}) Si-Ti-modified, medium-Mn multicomponent steel employed in the present investigation.

36 MATERIALS SCIENCE↗

Mechanochemical-thermal preparation and structural studies of mullite-type Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} solid solutions

A series of Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} solid solutions (0{<=}x{<=}1), prepared by mechanochemical processing of Bi{sub 2}O{sub 3}/Ga{sub 2}O{sub 3}/Al{sub 2}O{sub 3} mixtures and subsequent annealing, was investigated by XRD, EDX, and {sup 27}Al MAS NMR. The structure of the Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} solid solutions is found to be orthorhombic, space group Pbam (No. 55). The lattice parameters of the Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} series increase linearly with increasing gallium content. Rietveld refinement of the XRD data as well as the analysis of the {sup 27}Al MAS NMR spectra show a preference of gallium cations for the tetrahedral sites in Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9}. As a consequence, this leads to a far from random distribution of Al and Ga cations across the whole series of solid solutions. -- Graphical Abstract: Mullite-type Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} mixed crystals (0{<=}x{<=}1) prepared by a combined mechanochemical-thermal route possess a non-random distribution of Ga{sup 3+} and Al{sup 3+} cations over the sites of tetrahedral (T) and octahedral [O] coordination, characterized by the preference of Ga{sup 3+} (Al{sup 3+}) for tetrahedral (octahedral) sites. Display Omitted Highlights: {yields} Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} (0{<=}x{<=}1) were synthesized via mechanochemical-thermal route. {yields} The lattice parameters of Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} increase linearly with gallium content. {yields} Quantitative information on the cation distribution in Bi{sub 2}(Ga{sub x}Al{sub 1-x}){sub 4}O{sub 9} is derived. {yields} Ga{sup 3+} and Al{sup 3+} show the preference for tetrahedral and octahedral sites, respectively.

36 MATERIALS SCIENCE↗

Structural and electrical properties of T′-type Ln{sub 2}CuO{sub 4} (Ln = Pr, Nd, Sm, Eu and Gd) ceramics

T′-type Ln{sub 2}CuO{sub 4} (Ln = Pr, Nd, Sm, Eu and Gd) were successfully synthesized in phase pure form using conventional solid state reaction and sintering route. For all the Ln{sub 2}CuO{sub 4} samples, the solid state reaction temperature was found to be 950 °C and pure phase was realized only after 2-3 intermediate milling and solid state reaction cycles, irrespective of the lanthanide ion radius. Effect of lanthanide ion contraction on the structural properties was clearly revealed by the powder X-ray diffraction, with the XRD peaks observed to be shifting towards higher 2θ values with the decrease in Ln ionic radii. The optimum sintering temperature of these solid state reacted Ln{sub 2}CuO{sub 4} powder was found to be 1100 °C except for Pr{sub 2}CuO{sub 4} powder. The conductivity of these samples were tested over a wide temperature range (−100 to 150 °C), an anomaly was observed in the conductivity of all the Ln{sub 2}CuO{sub 4} samples near the antiferromagnetic ordering temperature of Cu (~ 30 °C), thus suggesting the bearing of ordering of magnetic moments on the electrical properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Basics of perfect communication through quantum networks

Perfect transfer of a quantum state through a one-dimensional chain is now well understood, allowing one not only to decide whether a fixed Hamiltonian achieves perfect transfer but to design a suitable one. We are particularly interested in being able to design, or understand the limitations imposed upon, Hamiltonians subject to various naturally arising constraints such as a limited coupling topology with low connectivity (specified by a graph) and type of interaction. In this paper, we characterize the necessary and sufficient conditions for transfer through a network and describe some natural consequences such as the impossibility of routing between many different recipients for a large class of Hamiltonians and the limitations on transfer rate. We also consider some of the trade-offs that arise in uniformly coupled networks (both Heisenberg and XX models) between transfer distance and the size of the network as a consequence of the derived conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the velocity dependence of the interstellar Na I/Ca II ratio

The correlation noted by Routly and Spitzer (1952) between the ratio of the column densities of interstellar Na I and Ca II and radial velocity in the spectra of 21 early-type stars is reinvestigated on the basis of more recent data for 64 stars. The original result is confirmed, and it is further demonstrated that the low values of Na I/Ca II are associated with large peculiar velocities relative to the local standard of rest. It is proposed that the bulk of the high-velocity components can be interpreted as old supernova remnants. A statistical analysis of the distribution with velocity of interstellar Ca II K lines observed by Adams (1949) in the directions of some 300 early-type stars is found to be consistent with this hypothesis.

Siluk, R. S.↗

Unmanned Aerial Systems Traffic Management (UTM): Safely Enabling UAS Operations in Low-Altitude Airspace

Currently, there is no established infrastructure to enable and safely manage the widespread use of low-altitude airspace and UAS flight operations. Given this, and understanding that the FAA faces a mandate to modernize the present air traffic management system through computer automation and significantly reduce the number of air traffic controllers by FY 2020, the FAA maintains that a comprehensive, yet fully automated UAS traffic management (UTM) system for low-altitude airspace is needed. The concept of UTM is to begin by leveraging concepts from the system of roads, lanes, stop signs, rules and lights that govern vehicles on the ground today. Building on its legacy of work in air traffic management (ATM), NASA is working with industry to develop prototype technologies for a UAS Traffic Management (UTM) system that would evolve airspace integration procedures for enabling safe, efficient low-altitude flight operations that autonomously manage UAS operating in an approved low-altitude airspace environment. UTM is a cloud-based system that will autonomously manage all traffic at low altitudes to include UASs being operated beyond visual line of sight of an operator. UTM would thus enable safe and efficient flight operations by providing fully integrated traffic management services such as airspace design, corridors, dynamic geofencing, severe weather and wind avoidance, congestion management, terrain avoidance, route planning re-routing, separation management, sequencing spacing, and contingency management. UTM removes the need for human operators to continuously monitor aircraft operating in approved areas. NASA envisions concepts for two types of UTM systems. The first would be a small portable system, which could be moved between geographical areas in support of operations such as precision agriculture and public safety. The second would be a Persistent system, which would support low-altitude operations in an approved area by providing continuous automated coverage. Both would require persistent communication, navigation, and surveillance (CNS) coverage to track, ensure, and monitor conformance. UTM is creating an airspace management tool that allows the ATM system to accommodate the number of UAS that will operate in the low altitude airspace. The analogy is just because we have a car, whether its autonomous or someone is driving, does not diminish the need for a road or road signs or rules of the road.

traffic management↗

Structural and dielectric properties of La and Ni-doped M-type BaFe{sub 12}O{sub 19} ceramics

BaFe{sub 12}O{sub 19} and Ba{sub 0.98}La{sub 0.02}Fe{sub 12-x}Ni{sub x}O{sub 19} (x = 0.02, 0.05) samples synthesized using solid-state reaction route crystallizes in hexagonal structure with space group P6{sub 3}/mmc as revealed from X-ray diffraction. A Raman spectrum shows seven strong and sharp modes at 291.9 (A{sub 1g}), 410.4 (E{sub 2g}), 496.09 (A{sub 1g}), 611.3 (E{sub 2g}), 681(A{sub 1g}), 1048.0 (A{sub 1g}+A{sub 1g}) and 1313.3 cm{sup −1} (A{sub 1g}+E{sub 2g}), identifying the presence of barium hexaferrite phase. The higher values of the dielectric constant at lower frequency and lower values at higher frequency indicate the dispersion due to interfacial polarization. Dielectric constant decreases as the doping concentration of Ni increases due to increase in band gap. A resonance peak has been observed in all three sample and is attributed to the fact that hopping frequency of charge carrier matches well with the frequency of the applied field. Henceforth, Ba{sub 0.98}La{sub 0.02}Fe{sub 12-x}Ni{sub x}O{sub 19} (x = 0.02, 0.05) is suitable novel materials for microwave application with low dielectric constant and dielectric loss values.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Resonant Pulse Combustors: A Reliable Route to Practical Pressure Gain Combustion

Pressure Gain Combustion (PGC) defined: A fundamentally unsteady process whereby gas expansion by heat release is constrained, causing a rise in stagnation pressure and allowing work extraction by expansion to the initial pressure. A particular type of pressure gain combustion (PGC) device is described, which is under investigation at GRC (Glenn Research Center). The Resonant Pulse Combustor (RPC) has been largely overlooked due to its theoretically low performance. However, its practical performance is quite competitive with other PGC systems, and its physical simplicity is unmatched.

combustion↗

Resonant Pulse Combustors: A Reliable Route to Practical Pressure Gain Combustion

Pressure Gain Combustion (PGC) defined: A fundamentally unsteady process whereby gas expansion by heat release is constrained, causing a rise in stagnation pressure and allowing work extraction by expansion to the initial pressure. A particular type of pressure gain combustion (PGC) device is described, which is under investigation at GRC (Glenn Research Center). The Resonant Pulse Combustor (RPC) has been largely overlooked due to its theoretically low performance. However, its practical performance is quite competitive with other PGC systems, and its physical simplicity is unmatched.

combustion↗

Selective Conversion of Lignin-Derivable 4-Alkylguaiacols to 4-Alkylcyclohexanols over Noble and Non-Noble-Metal Catalysts

Recent lignin-first catalytic lignocellulosic biorefineries produce large quantities of two potential platform chemicals, 4-n-propylguaiacol (PG) and 4-n-propylsyringol. Because conversion into 4-n-propylcyclohexanol (PCol), a precursor for novel polymer building blocks, presents a promising valorization route, reductive demethoxylation of PG was examined here in the liquid-phase over three commercial hydrogenation catalysts, viz. 5 wt % Ru/C, 5 wt % Pd/C and 65 wt % Ni/SiO2-Al2O3, at elevated temperatures ranging from 200 to 300 degrees C under hydrogen atmosphere. Kinetic profiles suggest two parallel conversion pathways: Pathway I involves PG hydrogenation to 4-n-propyl-2-methoxycyclohexanol (PMCol), followed by its demethoxylation to PCol, whereas Pathway II constitutes PG hydrodemethoxylation to 4-n-propylphenol (PPh), followed by its hydrogenation into PCol. The slowest step in the catalytic formation of PCol is the reductive methoxy removal from PMCol. Moreover, under the applied reaction conditions, PCol may react further into hydrocarbons. The following criteria are therefore essential to reach a high PCol yield: (i) catalytic pathway II is preferred as this route does not involve stable intermediates; (ii) reactivity of PMCol should be higher than that of PCol, and (iii) the overall carbon balance should be high. Both the catalyst type and the reaction conditions have a substantial impact on the PCol yield. Only the commercial Ni catalyst meets the three criteria, provided the reaction is performed at 250 degrees C in hexadecane. Additional advantages of this solvent choice are a high boiling point (low operational pressure in closed reactor systems), high solubility of PG and derived products, high thermal, reductive stability, and easy derivability from fatty biomass feedstock. This Ni catalyst also showed an excellent stability in recycling runs and is capable of converting highly concentrated (up to 20 wt %) PG in hexadecane. Ru and Pd on carbon showed a low PCol yield, as they are not conform the three criteria. Low hydrogen pressure favors Pathway II, resulting in a very high PCol yield of 85% at 10 bar. Catalytic conversion of guaiacol, 4-methyl- and 4-ethylguaiacol in comparable circumstances showed similarly high yields of the corresponding cyclohexanols.

09 BIOMASS FUELS↗

Nanoscale Stabilization of New Phases in the PbTe-Sb 2 Te 3 System: Pb m Sb 2n Te m+3n Nanocrystals

A series of novel rock-salt-type Pb m Sb 2n Te m+3n nanocrystals (m = 2, 3, 4, 6, 8, and 10; n = 1 and 2) were successfully prepared using a colloidal synthesis route. These materials are stable only on the nanoscale and have no bulk analogues. Elemental compositions were determined using scanning transmission electron microscopy/energy-dispersive X-ray spectroscopy (STEM/EDS) and inductively coupled plasma atomic emission spectroscopy (ICP-AES). The nanocrystals exhibit well-defined band energies in the mid-IR region that are nearly independent of their atomic compositions. Pb m Sb 2n Te m+3n nanocrystals behave as metastable homogeneous solid solutions at room temperature and tend to phase separate into the respective binary PbTe + Sb 2 Te 3 at 300 °C. Furthermore, pair distribution function (PDF) analysis suggests that the local structure of these Pb m Sb 2n Te m+3n nanocrystals is distorted with respect to the rock-salt structure.

Soriano, Ronald B↗

Photonic crystals with controlled disorder

Photonic crystals are extremely sensitive to structural disorder even to the point of completely losing their functionalities. While, on one side, this can be detrimental for applications in traditional optical devices, on the other side, it gives also rise to very interesting new physics and maybe even new applications. We propose a route to introduce disorder in photonic crystals in a controlled way by creating a certain percentage of vacancies in the lattice. We show how the method works and what type of materials can be obtained this way. Also, we use this system to probe the role of disorder on the resulting transport properties from various points of view, including measurements of the transport and scattering mean free path and the diffusion constant.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗