Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “repeatability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

The durability of graphite/epoxy laminate subjected to repeated low velocity impact

Low velocity impact has been considered as quasi-static loading, as the dynamic effects are decaying before the pressure reaches its maximum. However, when the impact energy is low enough as not to cause visible damage, the dynamic effect at the beginning of the impact may cause internal damage to the laminate. Laminates were loaded quasi-statically and by impact to the same bending strain and with the same indenter shape several times. The laminates that were subjected to the impact loading failed much more rapidly. Analysis of the problem shows that the stress waves created by the impact at the beginning of contact intensify the damage zone created by the preceding impact until the final failure occurs.

Rotem, A.↗

A resistance strain gage with repeatable and cancellable apparent strain for use to 1500 F

A temperature compensated static strain gauge, which is fabricated from Pd13Cr alloy and a Pt compensator, is being developed and has been tested over a temperature range to 1500 F at NASA-Lewis. The PdCr compensated strain gage has significantly lower apparent strain to 500 F than other high temperature strain gages. The PdCr compensated gage is protected from oxidation by a flame-sprayed alumina-4 wt pct zirconia overcoating. Test Results to 1500 F indicate apparent strain variations of less than 250 micro-epsilon and reproducibility between thermal cycles within 50 micro-epsilon. The apparent strain of the coated PdCr compensated gage can be predicted and cancelled due to its reproducibility and low value.

Lei, Jih-Fen↗

Input/output system identification - Learning from repeated experiments

The paper describes three approaches and possible variations for the determination of the Markov parameters for forced response data using general inputs. It is shown that, when the parameters in the solution procedure are bootstrapped, the results can be obtained very efficiently, but the errors propagate throughout all parameters. By arranging the data in a different form and using singular value decomposition, the resulting identified parameters are more accurate, in the least number of successive experiments, at the expense of a large matrix singular value decomposition. When a recursive procedure is employed, the calculations can be performed very efficiently, but the number of repetitions of the experiments is much greater for a given accuracy than for any of the previous approaches. An alternative formulation is proposed to combine the advantages of each of the approaches.

Juang, Jer-Nan↗

Deconditioning Under Prolonged, Repeated Bed Rest

Cardiovascular deconditioning from prolonged bed rest not counteracted by mild exercise and requires at least 3 weeks for recovery, report contends. Involves more than simple decrease in volume of plasma; neurohumoral mechanisms, loss of mass of skeletal muscles, and general decrease of body's metabolic needs seem to be major contributors.

Sandler, Harold↗

Centimeter repeatability of the VLBI estimates of European baselines

In the last three years, the European Geodetic Very Long Baseline Interferometry (VLBI) Network has grown to a total of six fixed antennas placed in Germany, Italy, Spain and Sweden, all equipped with the standard geodetic VLBI instrumentation and data recording systems. During this period of time, several experiments have been carried out using this interferometer providing data of very high quality due to the excellent sensitivity and performance of the European stations. The purpose of this paper is to study the consistency of the VLBI geodetic results on the European baselines with respect to the different degrees of freedom in the analysis procedure. Used to complete this study were both real and simulated data sets, two different software packages (OCCAM 3.0 and CALC 7.4/SOLVE), and a variety of data analysis strategies.

Rius, Antonio↗

Surface velocity fields of Ice Streams D and E derived from repeat satellite imagery

Sequential Landsat TM images were used to map in detail the surface velocity of Ice Streams D and E by tracking small ice features in coregistered images. The majority of both ice streams have now been mapped for velocity, and in most areas, approximate strain-rates are also determined. Tracking was accomplished semiautomatically using an image-to-image cross-correlation technique. Measurement density is roughly four per sq km in regions with distinct surface features (crevasses, snow dunes, etc.), and with cloud-free image coverage.

Scambos, Ted A.↗

Recurrent burst activity from the soft gamma-ray repeater SGR 1900 + 14

Three short very soft gamma-ray (SGR) transient events from a location consistent with that of the SGR 1900 + 14, first described by Mazets et al. (1979), were detected by the Burst and Transient Source Experiment. The results of observations of the temporal and spectral properties of the SGR 1900 + 14 suggest that the SGR phase lasts at least 13 years, lending support to the suggestion by Kouveliotou et al. (1987) and Fishman et al. (1989) that SGRs are related to galactic (possibly population I) objects, perhaps neutron stars.

Kouveliotou, C.↗

Effect of alternately high and low repeated stresses upon the fatigue strength of 25S-T aluminum alloy

Fatigue tests were made on one lot of 3/4 inch diameter rolled-and-drawn 25S-T aluminum-alloy rod normal in composition and tensile properties. The specimens were tested at 3500 cycles per second in a rotating-beam fatigue test machine. Tests were made for three ratios (20:1, 50:1, and 200:1) of the number of cycles applied at low stress to the number applied at high stress. In general, failure occurred when the number of cycles at either the low or the high stress approached the ordinary fatigue curve for the material, regardless of the sequence in which the stresses were applied.

Stickley, G W↗

Computing Satellite Maneuvers For A Repeating Ground Track

TOPEX/POSEIDON Ground Track Maintenance Maneuver Targeting Program (GTARG) assists in designing maneuvers to maintain orbit of TOPEX/POSEIDON satellite. Targeting strategies used either maximize time between maneuvers or force control band exit to occur at specified intervals. Runout mode allows for ground-track propagation without targeting. GTARG incorporates analytic mean-element propagation algorithm accounting for all perturbations known to cause significant variations in ground track. Perturbations include oblateness of Earth, luni-solar gravitation, drag, thrusts associated with impulsive maneuvers, and unspecified fixed forces acting on satellite in direction along trajectory. Written in VAX-FORTRAN.

Shapiro, Bruce↗

The Prebiotic Synthesis of Ethylenediamine Monoacetic Acid, The Repeating Unit of Peptide Nucleic Acids

The polymerization of ribonucleic acids or their precursors constitutes an important event in prebiotic chemistry. The various problems using ribonucleotides to make RNA suggest that there may have been a precursor. An attractive possibility are the peptide nucleic acids (PNA). PNAs are nucleotide analogs that make use of a polymer of ethylenediamine monoacetic acid (EDMA or 2-amninoethyl glycine) with the bases attached by an acetic acid. EDMA is an especially attractive alternative to the ribose phosphate or deoxyribose phosphate backbone because it contains no chiral centers and is potentially prebiotic, but there is no reported prebiotic synthesis. We have synthesized both EDMA and ethylenediamine diacetic acid (EDDA) from the prebiotic compounds ethylenediamine, formaldehyde, and hydrogen cyanide. The yields of EDMA range from 11 to 79% along with some sEDDA and uEDDA. These reactions work with concentrations of 10(exp -1)M and as low as 10(exp -4)M, and the reaction is likely to be effective at even lower concentrations. Ethylenediamine is a likely prebiotic compound, but it has not yet been demonstrated, although compounds such as ethanolamine and cysteamine have been proven to be prebiotic. Under neutral pH and heating at l00 C, EDMA is converted to the lactam, monoketopiperazine (MKP). The cyclization occurs and has an approximate ratio of MKP/EDMA = 3 at equilibrium. We have measured the solubilities of EDMA center dot H20 as 6.4 m, EDMA center dot HCl center dot H20 as 13.7 m, and EDMA center dot 2HCl center dot H20 as 3.4 m. These syntheses together with the high solubility of EDMA suggest that EDMA would concentrate in drying lagoons and might efficiently form polymers. Given the instability of ribose and the poor polymerizability of nucleotides, the prebiotic presence of EDMA and the possibility of its polymerization raises the possibility that PNAs are the progenitors of present day nucleic acids. A pre-RNA world may have existed in which PNAs or polymers with related peptide backbones were the dominant information macromolecules.

Nelson, Kevin E.↗

TOO Observations of Soft Gamma Repeaters

SGR 1806-20 turned active late 1996, and in response to this reactivation we triggered our target-of-opportunity observations. The results were extremely rewarding. We found a periodic modulation of the persistent X-ray signal, at a period of 7.47 seconds. We combined our data with similar data obtained by Dr T. Strohmayer, which confirmed the presence of the pulsations, and gave evidence for a spin down on a time scale of some 1000 years. We retrieved the pulsations in archival ASCA data, obtained in 1993 and 1995, and confirmed the long-term spin down of the neutron star in this system. The properties of SGR 1806-20 lead to the conclusion that it is a mgnetar, i.e., a neutron star with a magnetic field some 2 to 3 orders of magnitude higher than those of young radio pulsars and binary X-ray pulsars.

vanParadijs, J. A.↗

Hard Burst Emission from the Soft Gamma Repeater SGR 1900+14

We present evidence for burst emission from SGR 1900+14 with a power-law high energy spectrum extending beyond 500 kev. Unlike previous detections of high energy photons during bursts from SGRS, these emissions are not associated with high-luminosity burst intervals. Not only is the emission hard, but the spectra are better fit by Band's GRB function rather than by the traditional optically-thin thermal bremsstrahlung model. We find that the spectral evolution within these hard events obeys a hardness/intensity anti-correlation. Temporally, these events are distinct from typical SGR burst emissions in that they are longer (about 1 s) and have relatively smooth profiles. Despite a difference in peak luminosity of > 1E+ll between these bursts from SGR 1900+14 and cosmological GRBS, there are striking temporal and spectral similarities between the two kinds of bursts, aside from spectral evolution. We outline an interpretation of these events in the context of the magnetar model.

Duncan, Robert D.↗