Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “reflection coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Optimizing energy yield of monolithic perovskite/silicon tandem solar cells in real-world Conditions: The impact of luminescent coupling

Efficient light management is key to maximizing power conversion efficiency (PCE) in monolithic perovskite/silicon tandem solar cells. Achieving peak efficiency requires closely matched current generation in all junctions, especially in integrated configurations. However, real-world conditions vary significantly due to factors such as sunlight spectrum, diffuse-to-direct sunlight ratio, angular distribution of light, subcell temperature coefficients, and ground reflection. This study introduces a comprehensive optical and device simulation to optimize perovskite/silicon tandem cells, considering experimental luminescent coupling (LC) efficiency and its dependence on working conditions, alongside variations in radiative recombination, effect of temperature on absorptivity spectra, and cloud cover. Our results show potential energy yield improvements of up to 1.4 % with LC, based on current perovskite radiative recombination records, and up to 4 % with direct bandgap materials. Although radiative recombination's dependence on excitation intensity reduces output power and requires thicker absorbers, LC compensates for these losses. LC also lowers the optimized bandgap for the perovskite top cell from 1.72 eV to 1.64–1.68 eV, or even lower in regions with redshifted irradiance. Additionally, optimization revealed that thinner silicon bottom cells require a higher perovskite top cell bandgap, impacting the balance between fabrication cost and cell stability.

14 SOLAR ENERGY↗
DOE OSTI2025

Variable Bragg x-ray beam splitters

Beam splitters are utilized in a variety of advanced x-ray instruments and are essential for extending quantum optics techniques to x rays. A new fabrication method has produced thinned Bragg diffracting silicon devices with variable reflectivity and transmission coefficients and negligible absorption losses. Diffraction measurements confirm that silicon continues to exhibit perfect crystal diffraction even for thicknesses below two microns. Devices are machined from standard wafers, with the thinned regions contained within the robust frame of an unperturbed crystal for ease of handling.

Powers, L. T. (ORCID:000900047481248X)↗
DOE OSTI2024

Determination of short- and long-distance contributions in B 0 → K * 0 μ + μ − decays

An amplitude analysis of the B 0 → K * 0 μ + μ − decay is presented. The analysis is based on data collected by the LHCb experiment from proton-proton collisions at s = 7 , 8 and 13 TeV, corresponding to an integrated luminosity of 4.7 fb − 1 . For the first time, Wilson coefficients and nonlocal hadronic contributions are accessed directly from the unbinned data, where the latter are parametrized as a function of q 2 with a polynomial expansion. Wilson coefficients and nonlocal hadronic parameters are determined under two alternative hypotheses: the first relies on experimental information alone, while the second one includes information from theoretical predictions for the nonlocal contributions. Both models obtain similar results for the parameters of interest. The overall level of compatibility with the Standard Model is evaluated to be between 1.8 and 1.9 standard deviations when looking at the C 9 Wilson coefficient alone, and between 1.3 and 1.4 standard deviations when considering the full set of C 9 , C 10 , C 9 ′ and C 10 ′ Wilson coefficients. The ranges reflect the theoretical assumptions made in the analysis. © 2024 CERN, for the LHCb Collaboration 2024 CERN

Aaij, R. (ORCID:0000000305331952)↗
DOE OSTI2021

Spread Spectrum Time Domain Reflectometry (SSTDR) Digital Twin Simulation of Photovoltaic Systems for Fault Detection and Location

Utilizing spread spectrum time domain reflectometry (SSTDR) to detect, locate, and characterize faults in photovoltaic (PV) systems is examined in this paper. We present a method to obtain the model parameters that are needed to produce digital twin SSTDR responses for PV systems. The digital twin SSTDR responses could be used to predict faults within the PV systems. Here, the model parameters are the reflection and transmission coefficients at each impedance discontinuity in the PV system along with the propagation coefficients across each PV cable segment. We obtain model parameter by applying inverse modeling techniques to experimental SSTDR data associated with PV systems. Our model parameters can be used in any digital twin simulation method for modeling reflectometry in frequency-dependent and complex loads. For validation, we used the model parameters in a graph network simulation engine and adapted it to be used for SSTDR digital twin simulations in PV systems. We produced simulations for 0 to 10 PV modules connected in series. We also simulated SSTDR responses for open circuit disconnections in a PV setup containing 10 PV modules in series. Results show that all but one simulated disconnect locations match experimental disconnection locations of the same setup with an error of less than 5%.

14 SOLAR ENERGY↗
NASA NTRS1973

Reflection and refraction of hydromagnetic waves at the magnetopause

Reflection and transmission coefficients of MHD waves are obtained at a stable, plane interface which separates two compressible, perfectly conducting media in relative motion to each other. The coefficients are evaluated for representative conditions of the quiet-time, near-earth magnetopause. The transmission coefficient averaged over a hemispherical distribution of incident waves is found to be 1-2%. Yet the magnitude of the energy flux deposited into the magnetosphere in a day averaged over a hemispherical distribution of waves having amplitudes of say 2-3 gamma, is estimated to be of the order 10 to the 22-nd power erg. Therefore the energy input of MHD waves must contribute significantly to the energy budget of the magnetosphere. The assumption that the boundary surface is a tangential discontinuity with no curvature limits the present theory to hydromagnetic frequencies higher than about .1 Hz.

Verzariu, P.↗
NASA NTRS1975

An example of the use of laboratory results in the optics of the sea

A relation between the average cosine in underwater conditions and the coefficient of diffuse reflection is used to determine the optical characteristics of the sea. The cosine is considered equal to the ratio of the radiation flux through a horizontal cross section to the flux irradiating a spherical surface surrounding the observation point.

Timofeyeva, V. A.↗
NASA NTRS1975

Transients in a periodic slab - Coupled waves approach

The reflection and transmission of rectangular and Gaussian pulses impinging on a periodically stratified slab are studied and a number of examples are illustrated and analyzed. The coupled waves approach is used to derive the reflection and transmission coefficient, then the fast Fourier transform is used to illustrate the transient responses.

Elachi, C.↗
NASA NTRS1976

Electromagnetic reflection and transmission at interfaces involving graded dielectrics with applications to planetary radar astronomy

Reflection and transmission of electromagnetic waves at an interface between two homogeneous materials is modified when a transition zone of linearly increasing permittivity is inserted between the half spaces. Mathematical expressions for reflection and transmission coefficients are derived for waves at arbitrary incidence angles and polarized either in or perpendicular to the plane of incidence. Discontinuities in permittivity at the transition-zone boundaries are allowed. There is efficient transmission between the two half-spaces for transition-zone thicknesses of a wavelength or greater. For sharper changes, the matching layer has diminishing effect and the wave-interface interaction is characterized by the difference in properties between the two half-spaces. Examples applicable to lunar radar astronomy and airborne terrestrial remote sensing are used to illustrate the relationship between wavelength and thickness of the transition layer.

Simpson, R. A.↗
NASA NTRS1977

Transmission of sound through nonuniform circular ducts with compressible mean flows

An acoustic theory is developed to determine the sound transmission and attenuation through an infinite, hard-walled or lined, circular duct carrying compressible, sheared, mean flows and having a variable cross section. The theory is applicable to large as well as small axial variations, as long as the mean flow does not separate. Although the theory is described for circular ducts, it is applicable to other duct configurations - annular, two dimensional, and rectangular. The theory is described for the linear problem, but the technique is general and has the advantage of being applicable to the nonlinear case as well as the linear case. The technique is based on solving for the envelopes of the quasi-parallel acoustic modes that exist in the duct instead of solving for the actual wave. A computer program was developed. The mean flow model consists of a one dimensional flow in the core and a quarter-sine profile in the boundary layer. Results are presented for the reflection and transmission coefficients in ducts with varying slopes and carrying different mean flows.

Nayfeh, A. H.↗
NASA NTRS1979

A wave-envelope of sound propagation in nonuniform circular ducts with compressible mean flows

An acoustic theory is developed to determine the sound transmission and attenuation through an infinite, hard-walled or lined circular duct carrying compressible, sheared, mean flows and having a variable cross section. The theory is applicable to large as well as small axial variations, as long as the mean flow does not separate. The technique is based on solving for the envelopes of the quasi-parallel acoustic modes that exist in the duct instead of solving for the actual wave, thereby reducing the computation time and the round-off error encountered in purely numerical techniques. The solution recovers the solution based on the method of multiple scales for slowly varying duct geometry. A computer program was developed based on the wave-envelope analysis for general mean flows. Results are presented for the reflection and transmission coefficients as well as the acoustic pressure distributions for a number of conditions: both straight and variable area ducts with and without liners and mean flows from very low to high subsonic speeds are considered.

Nayfeh, A. H.↗
NASA NTRS1980

An alternative approach to charge transport in semiconducting electrodes

The excess-carrier charge transport through the space-charge region of a semiconducting electrode is analyzed by a technique known as the flux method. In this approach reflection and transmission coefficients appropriate for a sheet of uniform semiconducting material describe its transport properties. A review is presented of the flux method showing that the results for a semiconductor electrode reduce in a limiting case to those previously found by Gaertner if the depletion layer is treated as a perfectly transmitting medium in which scattering and recombination are ignored. Then, in the framework of the flux method the depletion layer is considered more realistically by explicitly taking into account scattering and recombination processes which occur in this region.

Thomchick, J.↗
NASA NTRS1983

Assessment of relative error sources in IR DIAL measurement accuracy

An assessment is made of the role the various error sources play in limiting the accuracy of infrared differential absorption lidar measurements used for the remote sensing of atmospheric species. An overview is presented of the relative contribution of each error source including the inadequate knowledge of the absorption coefficient, differential spectral reflectance, and background interference as well as measurement errors arising from signal fluctuations.

Menyuk, N.↗
NASA NTRS1985

Submillimeter and millimeter wave characterization of absorbing materials

Several microwave absorbers have been characterized in terms of transmittance and reflectance at frequencies between 35 GHz and 3 THz. The materials studied were a series of iron-loaded cast epoxy absorbers known as Eccosorb. Measurements show that reflectance and absorption coefficient increase with the iron density. A dramatic decrease, by as much as a factor of 2, in absorption coefficient was observed when the samples were cooled from ambient to cryogenic temperatures. A blackbody calibrator to be operated at liquid helium temperature was constructed using the measured optical constants for these absorbers. The measured absorption coefficient for cold Eccosorb CR-110 is within 20 percent of that reported recently by Peterson and Richards.

Hemmati, H.↗
NASA NTRS1987

Stochastic and fractal analysis of fracture trajectories

Analyses of fracture trajectories are used to investigate structures that fall between 'micro' and 'macro' scales. It was shown that fracture trajectories belong to the class of nonstationary processes. It was also found that correlation distance, which may be related to a characteristic size of a fracture process, increases with crack length. An assemblage of crack trajectory processes may be considered as a diffusive process. Chudnovsky (1981-1985) introduced a 'crack diffusion coefficient' d which reflects the ability of the material to deviate the crack trajectory from the most energetically efficient path and thus links the material toughness to its structure. For the set of fracture trajectories in AISI 304 steel, d was found to be equal to 1.04 microns. The fractal dimension D for the same set of trajectories was found to be 1.133.

Bessendorf, Michael H.↗
NASA NTRS1988

Material parameter determination from scattering measurements

The electrical, macroscopic performance of isotropic material can generally be described through their constitutive scalar parameters, permittivity and permeability which are symbolically represented by epsilon and mu, respectively. These parameters relate the electric and magnetic flux densities to the electric and magnetic fields through the following relationships: (1) D=epsilonE; and (2) B=muH. It is through these parameters that the interaction of electromagnetic waves with material can be quantized in terms of reflection and transmission coefficients, and propagation and attenuation factors.

Dominek, A.↗
NASA NTRS1991

Guided waves in a multilayered composite and ultrasonic nondestructive evaluation

Analysis of wave propagation in a laminated composite plate with many layers is made difficult by the anisotropy of the laminae, different lay-ups, many layers and defects in the fabricated plate. A good understanding of the wave field in such a plate without defects is a prerequisite for use of ultrasonic techniques to evaluate the various defects that can substantially reduce the strength and service life of this structure. Results of modeling studies of wave propagation and scattering in a multilayered composite plate are presented. The analysis technique combines the finite element discretization through the thickness with wave form representation along the plate in order to calculate the dispersive modes of propagation in the plate. To study scattering of these waves by a matrix crack that grows into delaminations, a hybrid finite element representation of the field near the crack and the modal representation of the scattered exterior field are used. Results are presented showing the dependence of the reflection and transmission coefficients on the size of the crack with delamination which can be used to size the defect using ultrasonic techniques.

Datta, S. K.↗