Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “plasma interactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Dynamic interactions between ionospheric plasma and spacecraft

Studies of the interactions between the Space Station Freedom and ionospheric plasma led to an improved understanding of the dynamics of these interactions. Some of the issues related to developing and sustaining arcs in ionospheric conditions are considered. A technique for the estimation of the amplitude and duration of arcs is presented. The technique uses the capacitance of the system to estimate the peak current and then uses the charge stored to estimate the arc duration. As new technologies are implemented on spacecraft, new environmental compatibility issues will arise. Some of the issues related to driving dielectric surfaces with alternating current voltages are considered. The steady state charging criteria is that over an oscillation, the ion charge collected is compensated for by the electron charge collected. This tends to drive the average potential negative so that the dielectric surface is positive for only a small portion of the cycle.

Snyder, David B.↗

The NASA Space Environment Simulation Laboratory

The NASA Space Environment Simulation Laboratory (SESL) features a chamber for studying specific space plasma physics phenomena. The test chamber, an upright domed cylinder having a 17 m diam and a 27 m height for an inner working volume, is lined with magnetic field generator coils. The chamber pressure is nominally 1/1,000,000th torr. Equipment positioning is carried out by remote control from outside guided by a closed circuit television system. Plasma is generated in the chamber by means of a 30 cm Kaufman thruster which produces ion densities of 100,000-1,000,000/cu cm. The ion bulk flow energy is in the range of 20-50 eV and a charge exchange with the ambient gas produces a cold isotropic ion component. Langmuir probes provide measurements of the electron temperature and density, and the composition and pressure are monitored by mass spectrometry and ion gages. Experiments have been performed on electron beam-plasma interactions, VLF antenna impedance measurements, and high voltage plasma sheaths which may be encountered by spacecraft.

Jost, R. J.↗

Circuit transients due to negative bias arcs-II

Two new models of negative-bias arcing on a solar cell power system in Low Earth Orbit are presented. One is an extended, analytical model and the other is a non-linear, numerical model. The models are based on an earlier analytical model in which the interactions between solar cell interconnects and the space plasma as well as the parameters of the power circuit are approximated linearly. Transient voltages due to arcs struck at the negative thermal of the solar panel are calculated in the time domain. The new models treat, respectively, further linear effects within the solar panel load circuit and non-linear effects associated with the plasma interactions. Results of computer calculations with the models show common-mode voltage transients of the electrically floating solar panel struck by an arc comparable to the early model but load transients that differ substantially from the early model. In particular, load transients of the non-linear model can be more than twice as great as those of the early model and more than twenty times as great as the extended, linear model.

Metz, R. N.↗

Space Technology Plasma Issues in 2001

The purpose of the workshop was to identify and discuss plasma issues that need to be resolved during the next 10 to 20 years (circa 2001) to facilitate the development of the advanced space technology that will be required 20 or 30 years into the future. The workshop consisted of 2 days of invited papers and 2 sessions of contributed poster papers. During the third day the meeting broke into 5 working groups, each of which held discussions and then reported back to the conference as a whole. The five panels were: Measurements Technology and Active Experiments Working Group; Advanced High-Voltage, High-Power and Energy-Storage Space Systems Working Group; Large Structures and Tethers Working Group; Plasma Interactions and Surface/Materials Effects Working Group; and Beam Plasmas, Electronic Propulsion and Active Experiments Using Beams Working Group.

Garrett, Henry↗

Pump depletion and hot-electron generation in long-density-scale-length plasma with shock-ignition high-intensity laser

Two-dimensional particle-in-cell simulations for laser plasma interaction with laser intensity of 10 16 W/cm 2 , plasma density range of 0.01–0.28$n_c$, and scale length of 230–330 $\textit{μ}$m showed significant pump depletion of the laser energy due to stimulated Raman scattering (SRS) and stimulated Brillouin scattering (SBS) in the low-density region ($n_e$ = 0.01–0.2$n_c$). The simulations identified hot electrons generated by SRS in the low-density region with moderate energy and by two-plasmon-decay near $n_e$ = 0.25$n_c$ with higher energy. The overall hot electron temperature (46 keV) and conversion efficiency (3%) were consistent with the experiment's measurements. Further, the simulations also showed artificially reducing SBS would lead to stronger SRS and a softer hot-electron spectrum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Environmental interaction implications for large space systems

Large Space Systems (LSS) comprise a new class of spacecraft, the design and performance of which may be seriously affected by a variety of environmental interactions. The special concerns associated with spacecraft charging and plasma interactions from the LSS designer's viewpoint are addressed. Survivability of these systems under combined solar U.V., particle radiation and repeated electrical discharges is of primary importance. Additional questions regard the character of electrical discharges over very large areas, the effects of high current/voltage systems and magnitude of induced structural disturbances. A concept is described for a large scale experiment platform.

Miller, E.↗

Effect of space environment on space-based radar phased-array antenna (A0133)

Kapton polyimide film was selected as the baseline material for the Grumman spce based radar (SBR) concept. To gain the requisite confidence for long-term service durability, it is desirable to subject material specimens as well as a portion of the SBR antenna directly to the combined space environment and compare property degradation to that caused by laboratory simulation. The overall objective of this program is to evauate the effect of the space environment on polymeric materials currently being considered for the Grumman SBR Phased-Array Antenna. Degradation mechanisms caused by thermal cycling, ultraviolet and charged-particle irradiation, applied load, and high-voltage plasma interaction will be evaluated. The experiment occupies a 6-in.-deep end corner tray located on the space end of the Long Duration Exposure Facility and consists of both passive and active parts. The passive part addresses the effect of environment and stress on the dimensional stability spliced and continuous Kapton, both plain and reinforced. The active part will study the interaction of high voltage and low-Earth-orbit plasma.

Delasi, R. J.↗

Interpretation of electrostatic noise observed by Voyager 1 in Titan's wake

During the Voyager 1 spacecraft flyby of Titan on November 12, 1980, an intense broadband low frequency electric field noise was observed in the inbound wake. This so-called sheath noise is believed to be generated by an ion beam-plasma interaction between the ions in the corotational Saturnian magnetospheric plasma and nearly stationary plasma created by the ionization of Titan's atmosphere. The analysis is based on the information from Voyager 1 and reasonable assumptions. The results agree quite well with the observation. The analysis shows that the instability only occurs where the density of the corotational ions is comparable to the density of ions originating from Titan's atmosphere. The growth rate is high enough to generate the observed noise, and the calculated and observed frequency ranges are in good agreement.

Ma, T. Z.↗

Plasma chamber testing of APSA coupons for the SAMPIE flight experiment

Different blanket materials and mounting techniques have been used to build 12 Advanced Photovoltaic Solar Array cell coupons for NASA's Solar Array Module Plasma Interactions Experiment. Ground testing of these coupons in a plasma chamber revealed significant differences among them in plasma current collection; while the Kapton-H coupon exhibited current collection consistent with the exposed interconnects, the other two coupon types tested experienced anomalously large collection currents. This may be due to enhanced plasma sheaths supported by the weakly conducting C and Ge employed in these coupons.

Hillard, G. B.↗

SAMPIE Measurements of the Space Station Plasma Current Analyzed

In March of 1994, STS-62 carried the NASA Lewis Research Center's Solar Array Module Plasma Interactions Experiment (SAMPIE) into orbit, where it investigated the plasma current collected and the arcs from solar arrays and other space power materials immersed in the low-Earth-orbit space plasma. One of the important experiments conducted was the plasma current collected by a four-cell coupon sample of solar array cells for the international space station. The importance of this experiment dates back to the 1990 and 1991 meetings of the Space Station Electrical Grounding Tiger Team. The Tiger Team determined that unless the electrical potentials on the space station structure were actively controlled via a plasma contactor, the space station structure would arc into the plasma at a rate that would destroy the thermal properties of its surface coatings in only a few years of operation. The space station plasma contactor will control its potentials by emitting electrons into the surrounding low-Earth-orbit plasma at the same rate that they are collected by the solar arrays. Thus, the level at which the space station solar arrays can collect current is very important in verifying that the plasma contactor design can do its job.

Source record↗

Spacecraft-environment interaction: The environmental plasma aspect

The effects involved in the interaction between an obstacle and a space plasma can be divided into: (1) effects on the obstacle itselt (i.e., its charging); and (2) effects on the environmental plasma due to the motion of the obstacle (i.e., the creation of shocks ahead of the obstacle and complicated wakes behind the obstacle). In the wake (or antisolar direction), plasma oscillations are excited and instabilities, wave-particle interactions, turbulence, etc., are believed to take place. The effects on the obstacle and on the environmental space plasma are coupled. Hence, simultaneous solutions to the Vlasov (or Boltzmann) and Poisson equations are sought. To obtain realistic solutions of practical use, three-dimensional and time-dependent models of the interaction are needed. Achieving the latter is indeed not simple.

Samir, U.↗

Numerical investigation of nonequilibrium electron effects on the collisional ionization rate in the collisional-radiative model

In this study, the interplay of kinetic electron physics and atomic processes in ultrashort laser-plasma interactions provides a comprehensive understanding of the impact of the electron energy distribution on plasma properties. Notably, nonequilibrium electrons play a vital role in collisional ionization, influencing ionization degrees and spectra. This paper introduces a computational model that integrates the physics of kinetic electrons and atomic processes, utilizing a Boltzmann equation for nonequilibrium electrons and a collisional-radiative model for atomic state populations. The model is used to investigate the influence of nonequilibrium electrons on collisional ionization rates and its effect on the population distribution, as observed in a widely known experiment. The study reveals a significant nonequilibrium electron presence during XFEL-matter interactions, profoundly affecting collisional ionization rates in the gas plasma, thereby necessitating careful consideration of the Collisional-Radiative model applied to such systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ripple-induced neoclassical toroidal viscous torque in Augmented-First Plasma operation phase in ITER

Abstract A systematic calculation is performed on the ripple-induced neoclassical toroidal viscous (NTV) torque for new ITER scenarios designed for the Augmented-First Plasma (A-FP) operation phase with the full tungsten wall, where the plasma-wall gap is varied in view of mitigating the impact of tungsten wall-plasma interactions. The torque calculation includes drift kinetic response of the plasma thermal and energetic particles to the n = 18 ( n is the toroidal harmonic number) ripple field. For the plasma scenario with ~45 cm plasma-wall gap at the outboard mid-plane and considering the corrected ripple level of 0.17% by the ferritic steel inserts, the computed net NTV torque acting on the plasma column is in the sub-Nm level. However, with decreasing the plasma-wall gap, the computed net NTV torque can reach a level comparable to that produced by the neutral-beam momentum injection in ITER. Ripple correction by ferritic inserts reduces the net torque by a factor of 3.3 for all the three A-FP scenarios considered. The n ω d = l ω b (with ω d and ω b being the toroidal precession and bounce frequencies of trapped particles, respectively, and l an integer number) type of resonance-enhancement of the NTV torque, due to thermal particles, is found to be weak in ITER despite high- n of 18. The same also holds for the ITER 10 MA steady state scenario from the D-T operation phase, where the aforementioned resonance associated with fusion-born alphas is also included. The ripple-induced NTV torque is well below that produced by the resonant magnetic perturbation applied for controlling the type-I edge-localized mode in ITER.

ITER↗

Structure of the ionospheric disturbances about planetary entry probes

Local ionospheric disturbances which would be created by a planetary entry probe are investigated. Competing theories of spacecraft-ambient plasma interactions are used to estimate computationally the perturbations of the plasma, particularly the structure of the near wake behind planetary entry vehicles. The results have bearing on the location and operation of plasma diagnostic instrumentation aboard planetary entry vehicles. Recent estimates of Mars ionospheric properties plus vehicle dimensions and speeds similar to those of the Viking Mars Lander are used to define the parameters essential to the theory. Smaller entry bodies are also considered. Comparisons are made of the results based on the different theories for a given assumed planetary atmosphere, and also with the perturbations a similar vehicle would generate in the earth's ionosphere.

Weil, H.↗

Crustal evolution inferred from Apollo magnetic measurements

Magnetic field and solar wind plasma density measurements were analyzed to determine the scale size characteristics of remanent fields at the Apollo 12, 15, and 16 landing sites. Theoretical model calculations of the field-plasma interaction, involving diffusion of the remanent field into the solar plasma, were compared to the data. The information provided by all these experiments shows that remanent fields over most of the lunar surface are characterized by spatial variations as small as a few kilometers. Large regions (50 to 100 km) of the lunar crust were probably uniformly magnetized during early crustal evolution. Bombardment and subsequent gardening of the upper layers of these magnetized regions left randomly oriented, smaller scale (5 to 10 km) magnetic sources close to the surface. The larger scale size fields of magnitude approximately 0.1 gammas are measured by the orbiting subsatellite experiments and the small scale sized remanent fields of magnitude approximately 100 gammas are measured by the surface experiments.

Dyal, P.↗

Propagation of electron beams in space

Particle simulations were performed in order to study the effects of beam plasma interaction and the propagation of an electron beam in a plasma with a magnetic field. It is found that the beam plasma instability results in the formation of a high energy tail in the electron velocity distribution which enhances the mean free path of the beam electrons. Moreover, the simulations show that when the beam density is much smaller than the ambient plasma density, currents much larger than the thermal return current can be injected into a plasma.

Ashour-Abdalla, M.↗

PV modules for ground testing

The main objective was to design and build a minimum of three photovoltaic test panels for plasma interaction experiments. These experiments are intended to provide data on the interactions between high-voltage solar arrays and the space plasma environment. Data gathered will significantly contribute to the development of design criteria for the space station solar arrays. Electrical isolation between the solar cell strings and the module mounting plate is required for high-voltage bias.

Source record↗