Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “partial derivative”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Exchange current density model for the contact-determined current-voltage behavior of solar cells

An analytic expression for the current–voltage [J(V)] behavior of a solar cell as limited by equilibrium exchange current densities of both carriers at both contacts is derived. The partial currents at both contacts to a generic semiconductor absorber are assumed to be linearly proportional to the excess carrier concentration at the interface with the contacts (e.g., as with Schottky-like contacts). The assumption that the quasi-Fermi levels in the absorber are approximately flat leads to an algebraic solution for the applied voltage as a function of current, which is inverted to obtain the analytic J(V) curve. The J(V) curve reveals distinct behavior associated with electrons and holes, separately, and allows for the determination of all critical performance parameters. In particular, it demonstrates how the characteristic features of the J(V) curve depend on the relative rate at which a particular carrier (electron or hole) is collected at one contact vs the other, rather than the relative rate of electron vs hole collection at a single contact. Furthermore, the model provides a unified explanation of how majority carrier extraction limitations cause nonideal J(V) behaviors such as S-shaped curves and dark/light crossover (i.e., failure of superposition). The efficacy and limitations of the model when applied to Schottky-type and doped semiconductor contacts are discussed. The work serves as a theoretical guide to scientists studying solar cells that are thought to be primarily limited by their contacts.

Solar cells↗

Optimal phase estimation with arbitrary a priori knowledge

The optimal-phase estimation strategy is derived when partial a priori knowledge on the estimated phase is available. The solution is found with the help of the most famous result from the entanglement theory: the positive partial transpose criterion. The structure of the optimal measurements, estimators, and the optimal probe states is analyzed. This Rapid Communication provides a unified framework bridging the gap in the literature on the subject which until now dealt almost exclusively with two extreme cases: almost perfect knowledge (local approach based on Fisher information) and no a priori knowledge (global approach based on covariant measurements). Special attention is paid to a natural a priori probability distribution arising from a diffusion process.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Compiler verification meets cross-language linking via data abstraction

Many real programs are written in multiple different programming languages, and supporting this pattern creates challenges for formal compiler verification. We describe our Coq verification of a compiler for a high-level language, such that the compiler correctness theorem allows us to derive partial-correctness Hoare-logic theorems for programs built by linking the assembly code output by our compiler and assembly code produced by other means. Our compiler supports such tricky features as storable cross-language function pointers, without giving up the usual benefits of being able to verify different compiler phases (including, in our case, two classic optimizations) independently. Here, the key technical innovation is a mixed operational and axiomatic semantics for the source language, with a built-in notion of abstract data types, such that compiled code interfaces with other languages only through axiomatically specified methods that mutate encapsulated private data, represented in whatever formats are most natural for those languages.

97 MATHEMATICS AND COMPUTING↗

Molecular interactions from the density functional theory for chemical reactivity: Interaction chemical potential, hardness, and reactivity principles

In the first paper of this series, the authors derived an expression for the interaction energy between two reagents in terms of the chemical reactivity indicators that can be derived from density functional perturbation theory. While negative interaction energies can explain reactivity, reactivity is often more simply explained using the “|dμ| big is good” rule or the maximum hardness principle. Expressions for the change in chemical potential (μ) and hardness when two reagents interact are derived. A partial justification for the maximum hardness principle is that the terms that appear in the interaction energy expression often reappear in the expression for the interaction hardness, but with opposite sign.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lunar mascons - Another model and its implications

A mascon model is proposed in which the mass excess of the mare basalts in the circular maria is supported isostatically by mass deficits at depth. The model predicts the observed positive gravity anomalies surrounded by negative ring anomalies and explains the absence of gravity anomalies over the irregular maria. The model implies that mare basalts were derived by partial melting of a source region at depth due to pressure relief resulting from the excavation of the circular mare basins, and that the crystalline residuum in the source region is of lower density than the original source rock. The trace element enrichment and near cotectic character of Apollo 11 and 12 lavas reported by some investigators may be caused by extensive magma fractionation enroute from an origin in the circular maria to the final, distant emplacement sites.

Kunze, A. W. G.↗

Origin of Apollo 17 rocks and soils

Lithophile trace element abundances have been determined by mass spectrometric isotope dilution for a suite of Apollo 17 samples. The six mare basalts have generally similar relative trace element abundances; they are also similar to Apollo 11 trace element poor basalts. It is suggested that these basalts were derived by partial fusion of cumulates. The Apollo 17 highland breccias show an order of magnitude range in trace element abundances although there is a clustering of KREEP-rich samples which are interpreted as mixtures. The Apollo 17 soils show only a limited range of trace element abundances. They are mixtures of highland breccias, mare basalts, and orange-black 'soil'. There appear to be two groups of soils, Light Mantle and the rest. Both groups seem to have the same basalt component, which is similar to Station 4 basalt from Shorty Crater and probably is the uppermost basalt unit throughout the Taurus-Littrow valley.

Philpotts, J. A.↗

Experimental melting relations of 63545, 76015, and 76055

The experiments discussed were conducted for the purpose of placing additional constraints on the origin of lunar highlands noritic compositions. The sample 63545 represents a fine-grained, crystalline melt rock consisting of pink spinel, plagioclase, divine, interstitial glass, minor oxides, and metal. According to Chao (1973), 76055 is an olivine-bearing micronorite hornfels with abundant xenocrysts and xenoliths. The sample 76015 is a vesicular, poikilitic impact melt with a homogeneous matrix. The obtained experimental melting relations of 63545, 76055, and 76015, are examined, taking into account experimental petrology and trace element chemistry of mare basalts. It is concluded that the studied compositions do not represent magmas derived by partial melting of either cosmic or differentiated source regions at any pressure in the moon. Presently available information would seem to favor an origin by impact-fusion of several highlands components.

Delano, J. W.↗

Three-dimensional stability of growing boundary layers

A theory is developed for the linear stability of three-dimensional growing boundary layers. The method of multiple scales is used to derive partial-differential equations describing the temporal and spatial evolution of the complex amplitudes and wavenumbers of the disturbances. In general, these equations are elliptic unless certain conditions are satisfied. For a monochromatic disturbance, these conditions demand that the ratio of the components of the complex group velocity be real and thereby relate the direction of growth of the disturbance to the disturbance wave angle. For a nongrowing boundary layer, this condition reduces to d-alpha/d-beta being real, in agreement with the result obtained by using the saddle-point method. For a wavepacket, these conditions demand that the components of the group velocity be real.

Nayfeh, A. H.↗

Ferromagnetic resonance intensity - A rapid method for determining lunar glass bead origin

Ferromagnetic resonance intensity, I(s), relies on the absence or presence of single-domain Fe formed during impact melting by autoreduction of Fe(2+) in the melt to distinguish volcanic from impact glass spherules in the lunar soil. SEM inspection of individual glass bead surfaces gave reliable evidence of the mode of glass genesis. Ferromagnetic resonance intensity was tested against the Apollo 15 and 17 volcanics. I(s) values of less than one were found in 94% of the volcanic glasses, implying the absence of single-domain Fe, while 75% of the impact glasses had elevated I(s) values. These samples lack single-domain Fe, and may represent impact melts of bedrock with little or no regolith contribution. Both the primary discrimination of volcanic and impact glasses, and the secondary one of bedrock-derived impact melts from impact melts partially or entirely derived from regolith, have been demonstrated for the I(s) technique.

Stone, C. D.↗

Abundancies of Ni, Cr, CO and major elements in the silicate portion of the Moon: Constraints from primary lunar magmas

The lunar volcanic glasses are samples of primary magnas derived by partial melting of the Moon mantle. The twenty-seven varieties of glass define three linear arrays having nearly constant Mg/Si ratios. The low-Ti magmas in each array approach the chondritic Ti/Al ratio. In addition, the Ca/Al ration in these low-Ti magmas trends toward the chrondritid value as one proceeds from array 1 through array 3. Using the chemistries of these primary magmas, as well as the assumption that the Moon possesses chondritic Ca/Al/Ti/Mg ratios, the silicate composition of the Moon has been estimated. The implications of these results are discussed.

Delano, J. W.↗

Evolution of ore deposits on terrestrial planets

Ore deposits on terrestrial planets materialized after core formation, mantle evolution, crustal development, interactions of surface rocks with the hydrosphere and atmosphere, and, where life exists on a planet, the involvement of biological activity. Core formation removed most of the siderophilic and chalcophilic elements, leaving mantles depleted in many of the strategic and noble metals relative to their chondritic abundances. Basaltic magma derived from partial melting of the mantle transported to the surface several metals contained in immiscible silicate and sulfide melts. Magmatic ore deposits were formed during cooling, fractional crystallization and density stratification from the basaltic melts. Such ore deposits found in earth's Archean rocks were probably generated during early histories of all terrestrial planets and may be the only types of igneous ores on Mars. Where plate tectonic activity was prevalent on a terrestrial planet, temporal evolution of ore deposits took place. Repetitive episodes of subduction modified the chemical compositions of the crust and upper mantles, leading to porphyry copper and molybdenum ores in calc-alkaline igneous rocks and granite-hosted tin and tungsten deposits. Such plate tectonic-induced mineralization in relatively young igneous rocks on earth may also have produced hydrothermal ore deposits on Venus in addition to the massive sulfide and cumulate chromite ores associated with Venusian mafic igneous rock. Sedimentary ore deposits resulting from mechanical and chemical weathering in reducing atmospheres in Archean earth included placer deposits (e.g., uraninite, gold, pyrite ores). Chromite, ilmenite, and other dense unreactive minerals could also be present on channel floors and in valley networks on Mars, while banded iron formations might underlie the Martian northern plains regions. As oxygen evolved in earth's atmosphere, so too did oxide ores. By analogy, gossans above sulfide ores probably occur on Mars, but not submarine ferromanganese nodules and crusts which have precipitated in oxygenated seawater on earth.

Burns, R. G.↗

Examples Of Synthesis Of Dual-Shaped Reflectors

Report presents examples to demonstrate validity and utility of method of synthesis of offset dual-shape reflectors. Method of synthesis described by the authors in previous journal article. Current report reviews derivation of partial differential equations and iterative method of numerical solution. Discusses significance of starting point of numerical integration on each reflector surface; this point could be at center, on outer rim, or at interior point. Emphasizes that one of notable attributes of partial differential equations is speed with which they can be solved.

Galindo, Victor↗

Mare volcanism in the Taurus-Littrow region

The products of mare volcanism at Taurus-Littrow occur in the form of crystalline basalts and volcanic glass beads. Both categories of samples define a compositionally diverse, but petrogenetically unrelated, suite of magmas derived by partial melting of a heterogenous, differentiated mantle beneath the region of the Apollo 17 landing site. This is a brief review of what is known and what is not known about mare volcanism at this location on the Moon.

Delano, J. W.↗

Thorium-uranium fractionation by garnet - Evidence for a deep source and rapid rise of oceanic basalts

Mid-ocean ridge basalts (MORBs) and ocean island basalts (OIBs) are derived by partial melting of the upper mantle and are marked by systematic excesses of thorium-230 activity relative to the activity of its parent, uranium-238. Experimental measurements of the distribution of thorium and uranium between the melt and solid residue show that, of the major phases in the upper mantle, only garnet will retain uranium over thorium. This sense of fractionation, which is opposite to that caused by clinopyroxene-melt partitioning, is consistent with the thorium-230 excesses observed in young oceanic basalts. Thus, both MORBs and OIBs must begin partial melting in the garnet stability field or below about 70 kilometers. A calculation shows that the thorium-230-uranium-238 disequilibrium in MORBs can be attributed to dynamic partial melting beginning at 80 kilometers with a melt porosity of 0.2 percent or more. This result requires that melting beneath ridges occurs in a wide region and that the magma rises to the surface at a velocity of at least 0.9 meter per year.

Latourrette, T. Z.↗

REE Partition Coefficients from Synthetic Diogenite-Like Enstatite and the Implications of Petrogenetic Modeling

Determining the petrogenesis of eucrites (basaltic achondrites) and diogenites (orthopyroxenites) and the possible links between the meteorite types was initiated 30 years ago by Mason. Since then, most investigators have worked on this question. A few contrasting theories have emerged, with the important distinction being whether or not there is a direct genetic link between eucrites and diogenites. One theory suggests that diogenites are cumulates resulting from the fractional crystallization of a parent magma with the eucrites crystallizing, from the residual magma after separation from the diogenite cumulates. Another model proposes that diogenites are cumulates formed from partial melts derived from a source region depleted by the prior generation of eucrite melts. It has also been proposed that the diogenites may not be directly linked to the eucrites and that they are cumulates derived from melts that are more orthopyroxene normative than the eucrites. This last theory has recently received more analytical and experimental support. One of the difficulties with petrogenetic modeling is that it requires appropriate partition coefficients for modeling because they are dependent on temperature, pressure, and composition. For this reason, we set out to determine minor- and trace-element partition coefficients for diogenite-like orthopyroxene. We have accomplished this task and now have enstatite/melt partition coefficients for Al, Cr, Ti, La, Ce, Nd, Sm, Eu, Dy, Er, Yb, and La.

Schwandt, C. S.↗

Detection, Evaluation, and Optimization of Optical Signals Generated by Fiber Optic Bragg Gratings Under Dynamic Excitations

The dynamic response of a fiber optic Bragg grating to mechanical vibrations is examined both theoretically and experimentally. The theoretical expressions describing the consequences of changes in the grating's reflection spectrum are derived for partially coherent beams in an interferometer. The analysis is given in terms of the dominant wavelength, optical bandwidth, and optical path difference of the interfering signals. Changes in the reflection spectrum caused by a periodic stretching and compression of the grating were experimentally measured using an unbalanced Michelson interferometer, a Michelson interferometer with a non-zero optical path difference. The interferometer's sensitivity to changes in dominant wavelength of the interfering beams was measured as a function of interferometer unbalance and was compared to theoretical predictions. The theoretical analysis enables the user to determine the optimum performance for an unbalanced interferometer.

Adamovsky, Grigory↗

Planetary Protection Considerations in EVA System Design

To better constrain their origin, we have performed systematic studies of the siderophile element distribution in metal from Enstatite achondrites and iron-rich meteorites linked to Enstatite achondrites. Humayun (2010) reported 20 siderophile elements in the metal of Horse Creek, Mt. Egerton and Tucson, three iron meteorites known for their high Si content in their metal. The Horse Creek and Mt. Egerton irons have elemental patterns identical to metallic solids derived from partially molten enstatite chondrites. Tucson has an unusual siderophile element pattern that is reminiscent of IVA irons, except for the most volatile siderophiles with condensation temperatures below that of Cu (Sb, Ge, Sn) which are more depleted. The origin of Tucson metal is likely linked to an impact involving a reduced chondritic body that provided the silicates, and IVA iron. In a related study, van Acken et al. (2010) reported siderophile element abundances in metal and sulfides from aubrites, chondritic inclusions in aubrites, and other enstatite achondrites (including a separate section of Mt. Egerton). They found that aubrite metal was linked to metal in enstatite chondrites by low degree partial melting forming sulfur-rich metallic liquids. A restite origin of aubrites is not consistent with these metal compositions. The link between the metal compositions and cumulate silicates is not simple. The metal must have been incorporated from enstatite chondritic material that was assimilated by the aubrite magma. A manuscript is in preparation (van Acken et al., 2010). In a related study, van Acken et al. (2010, submitted) reported new precise Os isotope ratios and highly siderophile element abundances in Enstatite chondrites, Enstatite achondrites, Rumurutite chondrites to explore the range of nucleosynthetic variation in s-process Os. They observed nucleosynthetic anomalies, deficiencies of s-process Os, in most primitive enstatite chondrites, but showed the Rumurutite chondrites have very little expression of these anomalies. hardware from the human-occupied area may limit (although not likely eliminate) external materials in the human habitat. Definition of design-to requirements is critical to understanding technical feasibility and costs. The definition of Planetary Protection needs in relation to EVA mission and system element development cost impacts should be considered and interpreted in terms of Plausible Protection criteria. Since EVA operations will have the most direct physical interaction with the Martian surface, PP needs should be considered in the terms of mitigating hardware and operations impacts and costs.

Eppler, Dean B.↗