Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pair distribution functions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Medium-range order and compositional correlation in metallic glasses

The compositional atomic ordering in metallic glasses was studied by simulation focusing on the medium-range order (MRO). Many metallic alloy liquids and glasses show MRO characterized by the oscillations in the atomic pair-distribution function (PDF) beyond the first peak, which decay exponentially with distance. To study the effects of the local chemical order on MRO, we examine the compositionally resolved PDF and its MRO for models of various binary metallic alloy glasses. We show that compositional ordering is limited mostly to the nearest-neighbor atoms and the MRO is largely independent of the compositional order. For some elements that strongly repel each other in the alloy, a second MRO periodicity is observed owing to the distinct correlations among them. These results are discussed in light of the idea that the MRO oscillations in the PDF describe the correlations in the atomic density fluctuations, rather than the detailed local atomic structure.

Atomic structure↗
DOE OSTI2025

High-temperature anomalous Hall effect driven by frustrated spin fluctuations in the antiferromagnetic delafossite metal PdCrO 2

Metallic delafossite oxides are of exceptional interest due to their ultraclean metallic transport. In the case of PdCrO 2 , this arises in a triangular-lattice antiferromagnet, creating a unique opportunity to study frustrated magnetism in a very clean metal. Here, we combine a chemical vapor transport crystal growth approach with magnetic, thermodynamic, magnetotransport, and neutron scattering measurements to elucidate the striking anomalous Hall effect (AHE) in antiferromagnetic PdCrO 2 . The unconventional AHE (with anomalous Hall conductivity ~10 5 Ω −1 cm −1 ) and a large positive magnetoresistance effect (>1,000%) are shown to exhibit complex temperature dependencies, persisting to almost seven times the Néel temperature (~250 K). These effects are directly compared to elastic neutron scattering, inelastic neutron scattering, and neutron magnetic pair distribution function data, establishing unambiguous links between anomalous magnetotransport properties and directly probed short-range spin fluctuations. The latter occur over a notably broad temperature range due to geometrical magnetic frustration. Connecting to recent experimental and theoretical developments, these findings are discussed in terms of a temperature-dependent interplay between chiral spin order and chiral spin fluctuations, significantly elucidating the high-temperature anomalous magnetotransport in such compounds.

anomalous Hall effect↗
DOE OSTI2021

APS: High-Energy X-rays Expediting Applied and Fundamental Research

The Advanced Photon Source (APS) at Argonne National Laboratory (ANL) was designed and built as one of the first large 3rd generation synchrotrons operated at 7 GeV. The United States Department of Energy (DOE) Office of Science funded the construction and continues to fund the operation of this national facility. Furthermore, the beamlines were originally operated by Collaborative Access Teams (CAT), which allowed a strong involvement of research institutes, universities, and industry. Today 43 of 68 beamlines are operated by the X-ray Science Division (XSD) and 35 beamlines are directly funded by the DOE Office of Science. The APS became operational in 1995, and was planned right from the beginning with 4 beamlines dedicated to high-energy x-rays above 40 keV: 1-ID designed to study engineering materials science, 6-ID-D for magnetism and condensed matter research, 11-ID-B dedicated to magnetic Compton scattering using an Elliptical Multipole Wiggler, and 11-ID-C for materials science and condensed matter physics. These stations were later joined by the bending magnet beamlines 6-BM for white beam studies and 17-BM for rapid powder diffraction. CAT operated beamlines such as 15-ID for crystallography or 16-ID for high-pressure studies also use the high-energy x-ray regime frequently. The program in Compton scattering ended in 2004 and the wiggler was replaced by an undulator. 11-ID-B became the first dedicated station for Pair Distribution Function (PDF) Analysis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Structural properties of PbTe quantum dots revealed by high-energy x-ray diffraction

High-energy x-ray diffraction (HE-XRD) experiments combined with an analysis based on atomic-pair-distribution functions can be an effective tool for probing low-dimensional materials. Here, we show how such an analysis can be used to gain insight into structural properties of PbTe nanoparticles (NPs). Here we interpret our HE-XRD data using an orthorhombic Pnma phase of PbTe, which is an orthorhombic distortion of the rocksalt phase. Although local crystal geometry can vary substantially with particle size at scales below 10 nm, and for very small NPs the particle size itself influences x-ray diffraction patterns, our study shows that HE-XRD can provide a unique nano-characterization tool for unraveling structural properties of nanoscale systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Atomic structure and Mott nature of the insulating charge density wave phase of 1T-TaS 2

Here, using x-ray pair distribution function (PDF) analysis and computer modeling, we explore structure models for the complex charge density wave (CDW) phases of layered 1T-TaS 2 that both well capture their atomic-level features and are amenable to electronic structure calculations. The models give the most probable position of constituent atoms in terms of 3D repetitive unit cells comprising a minimum number of Ta–S layers. Structure modeling results confirm the emergence of star-of-David (SD) like clusters of Ta atoms in the high-temperature incommensurate (IC) CDW phase and show that, contrary to the suggestions of recent studies, the low-temperature commensurate (C) CDW phase expands upon cooling thus reducing lattice strain. The C-CDW phase is also found to preserve the stacking sequence of Ta–S layers found in the room temperature, nearly commensurate (NC) CDW phase to a large extent. DFT based on the PDF refined model shows that bulk C-CDW 1T-TaS 2 also preserves the insulating state of individual layers of SD clusters, favoring the Mott physics description of the metal-to-insulator (NC-CDW to C-CDW) phase transition in 1T-TaS 2 . Our work highlights the importance of using precise crystal structure models in determining the nature of electronic phases in complex materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Lattice distortions and the metal–insulator transition in pure and Ti-substituted Ca 3 Ru 2 O 7

Here, we report pair distribution function studies on the relationship between the metal–insulator transition (MIT) and lattice distortions in pure and Ti-substituted bilayer Ca 3 Ru 2 O 7 . Structural refinements performed as a function of temperature, magnetic field and length scale reveal the presence of lattice distortions not only within but also orthogonal to the bilayers. Because of the distortions, the local and average crystal structure differ across a broad temperature region extending from room temperature to temperatures below the MIT. The coexistence of distinct lattice distortions is likely to be behind the marked structural flexibility of Ca 3 Ru 2 O 7 under external stimuli. This observation highlights the ubiquity of lattice distortions in an archetypal Mott system and calls for similar studies on other families of strongly correlated materials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Dual density wave state in liquid Ga

Liquid Ga is considered to be in a mixed state of metallic and covalent local states, and shows complex behavior, similar to those of other polyvalent Group III–V elements on the Periodic Table, such as Si, Ge, Sn, and Bi. We studied liquid Ga by inelastic neutron scattering to obtain the pair-distribution function. We found that the structure of liquid Ga has the medium-range order characterized by two overlapping density waves (DWs), one originating from ionic repulsion and the other due to electronic driving force to create charge DWs. We suggest that the dual DW state is naturally elucidated by the DW theory, rather than the widely used Ornstein–Zernike theory.

atomic structure↗
DOE OSTI2026

Short and medium range structure in elastic deformation of metallic and covalent glasses

Here, we present a concise methodology to analyze structural response to the applied stress in amorphous solids, including metallic glasses (MG), glassy selenium, silica and polycarbonate, using high energy x-ray diffraction and atomic pair distribution function (PDF) analysis. To assess the structural anisotropy induced by applied axial stress, diffraction data were expanded into spherical harmonics. Using Bessel transformation, components of the structure function were converted into isotropic and anisotropic PDFs. The PDFs were compared to the expected model behavior for ideal elastic deformation to separate homogeneous affine strain from local non-affine strains. In metallic glass the range of non-affine deformation is limited to the nearest neighbor shell, suggesting local strain relaxation under stress that occurs even in the elastic regime. Beyond the second atomic shell strain is uniform. However, in glassy silica, polycarbonate and selenium strong local bonding inhibits local displacements and strain in short range order is accommodated by rotation of local units. Interestingly, beyond a molecular unit, deformation in covalent systems is similar to MG, and response of the medium range order scales with the macroscopic stress.

glassy structure↗
DOE OSTI2022

Etched Silicon Planar CRL Optics for the High-Energy X-ray Diffraction Beamlines 11-ID-B and 11-ID-C at the APS

We report the focusing of high-energy X-rays is most commonly achieved by commercially available compound refractive lenses (CRL), which are added together in larger structures. There is a need for high-energy X-ray beamlines to enable focusing in only one dimension down to a few micrometers to study layered materials and thin films. High-energy X-rays above 50 keV require often 100 lenses or more, therefore it is more efficient to etch the complete arrays of lenses into a monolithic substrate like a silicon wafer. Custom lens arrays were fabricated for the high-energy x-ray beamlines 11-ID-B, and 11-ID-C at the Argonne National Laboratory. The fabrication required tuning parameters of the Bosch process to optimize the etching of deep vertical sidewalls at a reasonable speed without overheating. The beamline 11-ID-B is equipped with lens arrays of 85-110 lenses for 59 keV and 190-250 lenses for 87 keV photon energy, focusing the beam vertically below 5.0 µm at the sample positions between 1600 mm to 2100 mm. 11-ID-C has received arrays of 435 lenses that focus 106 keV X-rays to a vertical height of 2.0 µm at the sample position. In both cases, the flux density gain in the focal spot is larger than a factor of 20, relative to using slits to cut the beam size. The lens setup is permanently installed and can be moved in and out of the beam during the experiment without further alignment. The lenses have enabled operando diffraction studies on interfaces in batteries and the development of pair distribution function (PDF) analysis using grazing incidence geometry.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

The structure of molten calcium ferrite under various redox conditions

Laser-heated melts based on the 43CaO–57Fe 2 O 3-x eutectic, close to the calcium ferrite (CF) composition, were measured with high-energy X-ray diffraction using aerodynamic levitation over a range of redox states controlled by CO/CO 2 gas atmospheres. The iron–oxygen coordination number was found to rise from 4.4 ± 0.3 at 15% Fe 3+ to 5.3 ± 0.3 at 87% Fe 3+ . Empirical potential structure refinement modelling was used to obtain the ferric and ferrous partial pair distribution functions. It was found that the Fe 2+ iron–oxygen coordination number is consistently approximately 10% higher in CF than in pure iron oxide, while Fe 3+ is essentially identical in all but the most oxygen-rich environments (where it is higher in CF compared with FeO x ). The model also shows calcium octahedra to be the dominant species across all redox environments, although the population of CaO 7 increases with the availability of oxygen at the expense of CaO 4 and CaO 5 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Nanoscale degeneracy lifting in a geometrically frustrated antiferromagnet

The local atomic and magnetic structures of the compounds A MnO 2 (A = Na, Cu), which realize a geometrically frustrated, spatially anisotropic triangular lattice of Mn spins, have been investigated by atomic and magnetic pair distribution function analysis of neutron total scattering data. Relief of frustration in CuMnO 2 is accompanied by a conventional cooperative symmetry-lowering lattice distortion driven by Néel order. In NaMnO 2 , however, the distortion has a short-range nature. A cooperative interaction between the locally broken symmetry and short-range magnetic correlations lifts the magnetic degeneracy on a nanometer length scale, enabling long-range magnetic order in the Na derivative. The degree of frustration, mediated by residual disorder, contributes to the rather differing pathways to a single, stable magnetic ground state in these two related compounds. This study demonstrates how nanoscale structural distortions that cause local-scale perturbations can lift the ground-state degeneracy and trigger macroscopic magnetic order.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Ultrafast formation of a transient two-dimensional diamondlike structure in twisted bilayer graphene

Due to the absence of matching carbon atoms at honeycomb centers with carbon atoms in adjacent graphene sheets, theorists predicted that a sliding process is needed to form AA, AB', or ABC stacking when directly converting graphite into sp 3 bonded diamond. Here, using twisted bilayer graphene, which naturally provides AA and AB' stacking configurations, we report the ultrafast formation of a transient two-dimensional diamondlike structure (which is not observed in aligned graphene) under femtosecond laser irradiation. This photoinduced phase transition is evidenced by the appearance of bond lengths of 1.94 and 3.14 Å in the time-dependent differential pair distribution function using MeV ultrafast electron diffraction. Molecular dynamics and first-principles calculation indicate that sp 3 bonds nucleate at AA and AB' stacked areas in a moiré pattern. This work sheds light on the direct graphite-to-diamond transformation mechanism, which has not been fully understood for more than 60 years.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Lattice symmetry breaking transition and critical size limit for ferroic orders in nanophase BiFeO3

Finite size effects on the ferroic orders in BiFeO 3 are studied by atomic pair distribution function analysis and magnetic measurements. While bulk rhombohedral BiFeO 3 exhibits ferroelectricity and antiferromagnetism with a cycloidal magnetic moment arrangement leading to zero magnetization and weak magnetoelectric coupling, BiFeO 3 nanoparticles with a size smaller than the spin cycloid period of 62 nm preserve their polar rhombohedral structure and develop ferromagnetism, thus exhibiting coexisting polarization and nonzero magnetization that enhances the magnetoelectric coupling. When the nanoparticles become smaller than 17 nm, however, their crystal lattice expands and becomes nonpolar cubic. They also become superparamagnetic and thus simultaneously cease exhibiting both ferroelectricity and ferromagnetism. Our findings shed light on the interaction between the lattice structure and ferroic orders in nanophase perovskites and also provide a rare example of a lattice symmetry breaking phase transition that determines their critical size.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

High-pressure phase transitions and melt structure of Pb O 2 : An analog for silica

In situ x-ray diffraction measurements and inverse Monte Carlo simulations of pair distribution functions were used to study the structural response of PbO 2 under pressure and to characterize the local structure of liquid PbO 2 . Two phase transitions are observed upon room-temperature compression of crystalline PbO 2 up to ~65 GPa. Here, the starting mixture of rutile structured β– PbO 2 and orthorhombic α– PbO 2 undergoes a transition to a ZrO 2 -type orthorhombic phase with space group Pbca at ~21 GPa. Above 42 GPa, the Pbca phase transforms to a cotunnite-type phase with space group Pnam. In this paper, we also report short-range order in liquid PbO 2 , showing ~8–9-fold and 4–5-fold coordination around Pb and O atoms, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Local lattice distortions and electronic orders in strongly correlated systems by resonant total x-ray scattering: A case study of A Pt 2 X 2 intermetallics ( A = U , Ce, or La and X = Si or Ge)

Revealing local lattice distortions in physical systems is nontrivial, largely because such structural features often are not necessarily amenable to traditional crystallographic investigations. This poses limits to our understanding of the underlying physic, particularly in the case of strongly correlated systems where structural, electronic and magnetic degrees of freedom are intertwined. Using resonant total x-ray scattering coupled to differential pair distribution function analysis, we reveal the presence of pronounced local lattice distortions in the square net Pt planes in the prototypical strongly correlated APt 2 X 2 intermetallics (A = U, Ce or La and X = Si or Ge). The distortions are present before charge density wave, magnetic, Kondo lattice coherence and/or superconducting orders emerge in these materials and, as density functional calculations suggest, are likely to affect them. Finally, our study sheds light on the poorly known interactions between electronic orders and structural disorder in strongly correlated systems and also demonstrates an advanced experimental approach to determine it that is relevant to any physical system showing deviations from perfect crystallinity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Temperature-induced gradual polymorphic structural crossover in liquid indium, tin, and antimony

Temperature-induced polymorphic structural crossover in metallic liquid indium (In), tin (Sn), and antimony (Sb) is investigated by in situ high-energy x-ray diffraction and ab initio molecular dynamics simulations. The results demonstrate the existence of a temperature-induced reversible and gradual structural crossover in these three liquids, reflecting from both “static” structures, e.g., peak positions of the structure factor and pair distribution function, bond angle distribution, number of tetrahedra, cluster connection, free volume, and dynamical behaviors, including the relaxation time, diffusion coefficient, and non-Gaussian parameter. Further, the main difference from liquid In, Sn, to Sb is that not only the large-sized free volume but also the anharmonicity and the dynamical heterogeneity increase significantly with the appearance of strong covalent bonds. These findings will deepen the understanding of liquid structure and the liquid-liquid transition in metallic liquids.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Two-step charge density wave transition and hidden transient phase in 1 T – TiSe 2

Using variable temperature atomic pair distribution function analysis, we study the emergence of charge density wave (CDW) order in 1T-TiSe 2 and find that it takes place via a two-step transition. First, upon decreasing temperature to about 235(3) K, CDW related lattice distortions emerge in the individual TiSe 2 layers alone. Then, upon further decreasing the temperature, the two-dimensional distortions in the layers couple and the widely recognized three-dimensional 2a o x 2a o x 2c o superstructure emerges at about 205(3) K. Because two different band gaps are known to emerge at the same temperatures, the finding indicates the presence of strong electron-phonon coupling. The transient phase between the two steps lacks inversion symmetry and may serve as a precursor of the debated chiral 1T-TiSe 2 phase. Finally, our findings are important for the understanding of the enigmatic CDW transition in 1T-TiSe 2 and CDW instabilities in van der Waals materials in general.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗