Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nuclear structure functions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Sodium diffusion in heterogeneous porous media: Connecting laboratory experiments and simulations

Sodium has been suggested as a tracer for brine in reservoir formations where a significant amount of sodium ion is found mainly in the aqueous phase. Fortunately, the most abundant sodium isotope, 23 Na, is Nuclear Magnetic Resonance (NMR) active, making it possible to study the structure and dynamical properties of both bulk and pore confined fluid systems. We investigated the diffusion of key dissolved sodium species in bulk solution and porous media as a function of composition, ionic strength, and permeability of the carbonate samples using NMR relaxometry and pulsed-field gradient (PFG) NMR techniques. We use Indiana limestone as an example of natural porous media and water as a freely diffusible tracer and carrier. We demonstrate apparent diffusion measurement of sodium based on changes in spin–spin relaxation time (T 2 ) signal in pore confinement. The diffusion rate of sodium decreases with increasing counter-ion size. This effect is greater at higher ionic strengths and lower chemical potentials in porous media. The reactive transport code, CrunchFlow, was used to complement the NMR experiments to simulate diffusion behavior in porous media. Combining these two methods provides a powerful approach to estimating effective diffusion coefficients in heterogeneous matrices. The modeling considers the influence of physical properties (porosity and tortuosity) and chemical properties (geochemical composition and chemical gradients). The results presented in this work highlight the advantage of measuring apparent diffusivity using NMR T 2 relaxometry in conjunction with numerical simulation to derive effective diffusivity and the corresponding matrix properties (i.e., tortuosity) of the system.

58 GEOSCIENCES↗
DOE OSTI2020

A molecular switch regulating transcriptional repression and activation of PPARγ

Nuclear receptor (NR) transcription factors use a conserved activation function-2 (AF-2) helix 12 mechanism for agonist-induced coactivator interaction and NR transcriptional activation. In contrast, ligand-induced corepressor-dependent NR repression appears to occur through structurally diverse mechanisms. We report two crystal structures of peroxisome proliferator-activated receptor gamma (PPARγ) in an inverse agonist/corepressor-bound transcriptionally repressive conformation. Helix 12 is displaced from the solvent-exposed active conformation and occupies the orthosteric ligand-binding pocket enabled by a conformational change that doubles the pocket volume. Paramagnetic relaxation enhancement (PRE) NMR and chemical crosslinking mass spectrometry confirm the repressive helix 12 conformation. PRE NMR also defines the mechanism of action of the corepressor-selective inverse agonist T0070907, and reveals that apo-helix 12 exchanges between transcriptionally active and repressive conformations—supporting a fundamental hypothesis in the NR field that helix 12 exchanges between transcriptionally active and repressive conformations.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

On the nonadiabatic collisional quenching of OH(A) by H 2 : a four coupled quasi-diabatic state description

A four-state diabatic potential energy matrix (DPEM), H d , for the description of the nonadiabatic quenching of OH(A 2 Σ + ) by collisions with H 2 is reported. The DPEM is constructed as a fit to adiabatic energies, energy gradients, and derivative couplings obtained exclusively from multireference configuration interaction wave functions. A four-adiabatic-electronic-state representation is used in order to describe all energetically accessible regions of the nuclear coordinate space. Partial permutation-inversion symmetry is incorporated into the representation. Here, the fit is based on electronic structure data at 42 882 points, described by over 1.6 million least squares equations with a root mean square (mean unsigned) error of 178(83) cm –1 . Comparison of ab initio and H d determined minima, saddle points, and energy minimized points on C 2v , C s , C ∞v , and C 1 (noncoplanar) portions of two conical intersection seams are used to establish the accuracy of the H d .

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Design and Contruction of a Longitudinally Polarized Solid Nuclear Target for CLAS12

A new polarized nuclear target has been developed, constructed, and deployed at Jefferson Laboratory in Newport News, VA for use with the upgraded 12 GeV CEBAF (Continuous Electron Beam Accelerator Facility) accelerator and the Hall B CLAS12 (12 GeV CEBAF Large Acceptance Spectrometer) detector array. This ?APOLLO? (Ammonia PO-Larized LOngitudinally) target is a longitudinally polarized, solid ammonia, nuclear target which employs DNP (Dynamic Nuclear Polarization) to induce a net polarization in samples of protons (NH3) and deuterons (ND3) cooled to 1 K via helium evaporation, held in a 5 T polarizing field supplied by the CLAS12 spectrometer, and irradiated with 140 GHz microwave radiation. It was utilized in the RGC (Run Group C) experiment suite through a collaboration of the JLab Target Group, Old Dominion University, Christopher Newport University, the University of Virginia, and the CLAS Collaboration. RGC comprised six experiments which measured multiple spin-dependent observables across a wide kinematic phase space for use in nucleon spin studies. The dimensional constraints necessary for the incorporation of APOLLO into CLAS12, as well as the considerations necessary to utilize the CLAS12 solenoid, introduced unique challenges to the target design. This document presents the innovative solutions developed for these challenges including a novel material transport system, superconducting magnetic correction coils, and an all new bespoke NMR (Nuclear Magnetic Resonance) system. In addition to a detailed description of the complete target system and an initial report of the RGC experimental run, it will also present a study of Quark-Hadron Duality in the g1 spin structure function based on Hall B EG1b data and pQCD fits from the JAM (Jefferson Lab Angular Momentum) Collaboration.

Lagerquist, Victoria Lagerquist↗
DOE OSTI2020

Exact restoration of Galilei invariance in density functional calculations with quantum Monte Carlo

We investigate some aspects of the connection between mean-field and ab-initio calculations for any-nucleon systems employing the Gogny effective interaction. In particular, we present variational Monte Carlo calculations of 4 He and 16 O, for which we extended the formalism of the linear method to the case of a density-dependent Hamiltonian. Monte Carlo calculations using an uncorrelated basis reduce to Hartree-Fock ones, but Galilean invariance can be preserved, contrary to the usual treatment. An analysis of the results obtained with the Gogny force when used in conjunction with correlated wave functions has also been performed. Here, the calculations show the collapse of the deuteron, leading to a set of unphysical predictions for the structure of heavier nuclei. This behavior remarks the different role of the Gogny effective interaction as compared to bare interactions typically used in fully microscopic calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Combined Experimental and Computational Study of Molybdenum and Niobium for Nuclear Sensor Application

Due to their novel electromagnetic and thermal properties, molybdenum (Mo) and niobium (Nb) become optimal temperature sensor materials for nuclear energy applications. We leveraged voltage recorded during a heat ramp to tune a computational method to predict the Seebeck electromotive force (EMF) of Mo and Nb. Using a combined Density Functional Theory (DFT) and Boltzmann Transport Equations (BTE) method the voltage was predicted but did not include the effects of temperature on atomic structure. Combining Ab Initio Molecular Dynamics (AIMD) and BTE included temperature effects on structure optimization and yielded voltages in a good agreement with experiment. Lanthanum (La) and Phosphorus (P) additives in Mo and Nb, respectively, could increase the EMF compared to those of the pure metals. The presence of oxygen (O) in Mo increases the EMF while O in Nb slightly reduces the EMF. Furthermore, our studies suggested that heat treatment-induced structural changes that lead to a reduction in voltage occur not only at the mesoscale as previously understood but also at the atomic scale.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Neural-network quantum states for the nuclear many-body problem

A long-standing goal of nuclear theory is to explain how the structure and dynamics of atomic nuclei and neutron-star matter emerge from the underlying interactions among protons and neutrons. Achieving this goal requires solving the nuclear quantum many-body problem with high accuracy across a wide range of length scales and density regimes. In this review, we discuss how artificial neural network representations of the nuclear many-body wave function have significantly extended the capabilities of continuum quantum Monte Carlo methods. In particular, neural network quantum states enable calculations of larger systems than were previously accessible and provide a flexible framework for capturing phenomena that challenge conventional approaches, including the emergence of nuclear clusters and superfluid phases in dense matter. We highlight recent applications to finite nuclei, infinite nuclear and neutron matter, and dynamical processes relevant to lepton-nucleus and nucleus-nucleus scattering. We also discuss conceptual and methodological connections with condensed matter physics, emphasizing developments in neural network quantum states that bridge strongly correlated systems across disciplines. Together, these developments demonstrate how neural-network methods open new avenues toward unified and accurate descriptions of nuclear structure, matter, and reactions.

Lovato, Alessandro [Argonne; TIFPA-INFN, Trento; V↗
DOE OSTI2025

Liquid–Vapor Phase Equilibrium in Molten Aluminum Chloride (AlCl 3 ) Enabled by Machine Learning Interatomic Potentials

Molten salts are promising candidates in numerous clean energy applications, where knowledge of thermophysical properties and vapor pressure across their operating temperature ranges is critical for safe operations. Due to challenges in evaluating these properties using experimental methods, fast and scalable molecular simulations are essential to complement the experimental data. In this study, we developed machine learning interatomic potentials (MLIP) to study the AlCl 3 molten salt across varied thermodynamic conditions (T = 473–613 K and P = 2.7–23.4 bar), which allowed us to predict temperature-surface tension correlations and liquid–vapor phase diagram from direct simulations of two-phase coexistence in this molten salt. Two MLIP architectures, a Kernel-based potential and neural network interatomic potential (NNIP), were considered to benchmark their performance for AlCl 3 molten salt using experimental structure and density values. The NNIP potential employed in two-phase equilibrium simulations yields the critical temperature and critical density of AlCl 3 that are within 10 K (∼3%) and 0.03 g/cm 3 (∼7%) of the reported experimental values. An accurate correlation between temperature and viscosities is obtained as well. In doing so, we report that the inclusion of low-density configurations in their training is critical to more accurately represent the AlCl 3 system across a wide phase-space. The MLIP trained using PBE-D3 functional in the ab initio molecular dynamics (AIMD) simulations (120 atoms) also showed close agreement with experimentally determined molten salt structure comprising Al 2 Cl 6 dimers, as validated using Raman spectra and neutron structure factor. Furthermore, the PBE-D3 as well as its trained MLIP showed better liquid density and temperature correlation for AlCl 3 system when compared to several other density functionals explored in this work. Overall, the demonstrated approach to predict temperature correlations for liquid and vapor densities in this study can be employed to screen nuclear reactors-relevant compositions, helping to mitigate safety concerns.

Ab initio molecular dynamics↗
DOE OSTI2021

Measurements of dihadron correlations relative to the event plane in Au+Au collisions at $\sqrt{s_{NN}} =200$ GeV*

Dihadron azimuthal correlations containing a high transverse momentum ($ p_{T} $) trigger particle are sensitive to the properties of the nuclear medium created at RHIC through the strong interactions occurring between the traversing parton and the medium, i.e. jet-quenching. Previous measurements revealed a strong modification to dihadron azimuthal correlations in Au+Au collisions with respect to p+p and d+Au collisions. The modification increases with the collision centrality, suggesting a path-length or energy density dependence to the jet-quenching effect. This paper reports STAR measurements of dihadron azimuthal correlations in mid-central (20%-60%) Au+Au collisions at $ \sqrt{s_{\rm{NN}}} = 200 $ GeV as a function of the trigger particle's azimuthal angle relative to the event plane, $ \phi_{s} = | \phi_{t}- \psi_{{\rm{EP}}}| $. The azimuthal correlation is studied as a function of both the trigger and associated particle $ p_{T} $. The subtractions of the combinatorial background and anisotropic flow, assuming Zero Yield At Minimum (ZYAM), are described. The correlation results are first discussed with subtraction of the even harmonic (elliptic and quadrangular) flow backgrounds. The away-side correlation is strongly modified, and the modification varies with $ \phi_{s} $, with a double-peak structure for out-of-plane trigger particles. The near-side ridge (long range pseudo-rapidity $ \Delta\eta $ correlation) appears to drop with increasing $ \phi_{s} $ while the jet-like component remains approximately constant. The correlation functions are further studied with the subtraction of odd harmonic triangular flow background arising from fluctuations. It is found that the triangular flow, while responsible for the majority of the amplitudes, is not sufficient to explain the $ \phi_{s} $-dependence of the ridge or the away-side double-peak structure. The dropping ridge with $ \phi_{s} $ could be attributed to a $ \phi_{s} $-dependent elliptic anisotropy; however, the physics mechanism of the ridge remains an open question. Even with a $ \phi_{s} $-dependent elliptic flow, the away-side correlation structure is robust. These results, with extensive systematic studies of the dihadron correlations as a function of $ \phi_{s} $, trigger and associated particle $ p_{T} $, and the pseudo-rapidity range $ \Delta\eta $, should provide stringent inputs to help understand the underlying physics mechanisms of jet-medium interactions in high energy nuclear collisions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Curing process and pore structure of metakaolin-based geopolymers: Liquid-state 1H NMR investigation

Geopolymers are emerging construction materials with lower carbon dioxide emissions compared to the conventional cementitious materials. The knowledge of the curing process and the related pore structures are important for optimizing the properties of these materials for different applications. The curing process and final pore structure are sensitive to the amount of used water, however the specifics are unclear. The curing process and pore structures of metakaolin-based geopolymers with a narrow water-to-solid (w/s) ratio (0.59–0.66) were monitored by nuclear magnetic resonance (NMR) relaxometry and cryoporometry. The 14-day curing process was investigated by monitoring the change of T{sub 2} and T{sub 1} relaxation times and water signal intensity. After the curing, the pore structures were characterized by 2D T{sub 1}-T{sub 2} correlation and T{sub 2}-T{sub 2} exchange measurements of absorbed water. The pore size distributions (PSDs) were measured with NMR cryoporometry and compared to nitrogen physisorption and mercury intrusion porosimetry (MIP) results. We found that the relaxation times decreased as the pore structure of the geopolymers matured during the curing while the dissolution and the condensation periods of the curing were distinguished by the changes in signal amplitude reflecting the proton density. After the curing, three distinct pore sizes and connectivity between pores were identified from T{sub 1}-T{sub 2} and T{sub 2}-T{sub 2} spectra. Their PSDs were measured, and they were found to correspond to two different pore sizes originating from the arrangement of clusters and defective pores. In the narrow w/s ratio (0.59–0.66), the curing times were the same for all samples when cured at 24 °C while the pore sizes were observed to increase as a function of the w/s ratio.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Fission fragment decay simulations with the CGMF code

The CGMF code implements the Hauser-Feshbach statistical nuclear reaction model to follow the de-excitation of fission fragments by successive emissions of prompt neutrons and γ rays. The Monte Carlo technique is used to facilitate the analysis of complex distributions and correlations among the prompt fission observables. Starting from initial configurations for the fission fragments in mass, charge, kinetic energy, excitation energy, spin, and parity, Y(A,Z,KE,U,J,π), CGMF samples neutron and γ-ray probability distributions at each stage of the decay process, conserving energy, spin and parity. Nuclear structure and reaction input data from the RIPL3 library are used to describe fission fragment properties and decay probabilities. Characteristics of prompt fission neutrons, prompt fission γ rays, and independent fission yields can be studied consistently. Correlations in energy, angle and multiplicity among the emitted neutrons and γ rays can be easily analyzed as a function of the emitting fragments. Finally, in its current version, CGMF is limited to certain spontaneous fission reactions on Pu and Cf isotopes, as well as neutron-induced fission reactions up to 20 MeV on U, Np, and Pu isotopes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Solvent-derived defects suppress adsorption in MOF-74

Defects in metal-organic frameworks (MOFs) have great impact on their nano-scale structure and physiochemical properties. However, isolated defects are easily concealed when the frameworks are interrogated by typical characterization methods. In this work, we unveil the presence of solvent-derived formate defects in MOF-74, an important class of MOFs with open metal sites. With multi-dimensional solid-state nuclear magnetic resonance (NMR) investigations, we uncover the ligand substitution role of formate and its chemical origin from decomposed N,N-dimethylformamide (DMF) solvent. The placement and coordination structure of formate defects are determined by 13 C NMR and density functional theory (DFT) calculations. The extra metal-oxygen bonds with formates partially eliminate open metal sites and lead to a quantitative decrease of N 2 and CO 2 adsorption with respect to the defect concentration. In-situ NMR analysis and molecular simulations of CO 2 dynamics elaborate the adsorption mechanisms in defective MOF-74. Our study establishes comprehensive strategies to search, elucidate and manipulate defects in MOFs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

SAM: A Modern System Code for Advanced Non-LWR Safety Analysis

The System Analysis Module (SAM), developed at Argonne National Laboratory and by collaborators at other organizations, is for advanced non–light water reactor safety analysis. SAM aims to provide fast-running, modest-fidelity, whole-plant transient analysis capabilities that are essential for fast-turnaround design scoping and engineering analyses of advanced reactor concepts. To facilitate code development, SAM utilizes the MOOSE object-oriented application framework, its underlying finite element library, and linear and nonlinear solvers to leverage modern advanced software environments and numerical methods. SAM aims to solve tightly coupled physical phenomena, including fission reaction, heat transfer, fluid dynamics, and thermal-mechanical responses in advanced reactor structures, systems, and components with high accuracy and efficiency. Finally, this paper gives an overview of the SAM code development, including goals and functional requirements, physical models, current capabilities, verification and validation, software quality assurance, and examples of simulations for advanced nuclear reactor applications.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Measurement of the Neutron Elastic Electromagnetic Form Factor Ratio at Large Momentum Transfer

Exploring nucleon structure is vital both for understanding its origin and existence as well as for the advancement of the sciences. It helps us answer key questions such as how quark and gluon dynamics create 99% of the nucleon mass. Electron- nucleon scattering has been widely used for precision studies of the nucleon and nuclear structure since the Nobel Prize winning investigations by Robert Hofstadter and collaborators in the 1950s. These studies provide information about the spatial charge and current densities of the nucleon in terms of the electromagnetic form factors. The form factors are functions of four momentum transfer squared (Q2). Extending the electromagnetic form factor measurements to higher Q2 plays a critical role in furthering the understanding of nucleon structure. This motivated the Super BigBite Spectrometer (SBS) program at Jefferson Lab. The open nature of the spectrometers and the direct line of sight from the target to the tracking detector locations in experimental setups such as SBS creates high levels of background at the detectors. This necessitates the use of tracking detectors with high rate capability and good position resolution. Gas Electron Multiplier (GEM) detectors are an excellent choice for tracking detectors in such experiments. Understanding the performance of the GEM detectors is important not just for SBS experiments but also for future high-luminosity experiments. This thesis reports the exploratory results from the measurement of the neutron elastic electromagnetic form factor ratio (Gn E/Gn M) at high momentum transfer. A longitudinally polarized electron beam was scattered off a polarized 3He target, used as an effective polarized neutron target. In this experiment, the polarized 3He target achieved a world record polarization weighted luminosity at a beam current of 45 µA. Double spin asymmetry of the scattered neutron events is used to extract the neutron form factor ratio. Measurements were taken at Q2 = 3.0, 6.8, 9.8 (GeV/c)2. The lowest Q2 measurement is in good agreement with the existing world data, and the higher-Q2 measurements extend the Q2 reach well beyond the existing world data and are expected to remain unmatched for a long time.

Gamage, Vimukthi Haththotuwa [Univ. of Virginia, C↗
DOE OSTI2022

GeN-ROM—An OpenFOAM®-based multiphysics reduced-order modeling framework for the analysis of Molten Salt Reactors

This work presents a projection-based multiphysics Model Order Reduction (MOR) framework for the analysis of nuclear systems and its application to parametric simulations of Molten Salt Reactors (MSR). The framework, named GeN-ROM, is developed using OpenFOAM® and employs a Proper Orthogonal Decomposition aided Reduced-Basis technique (POD-RB). It can be used to reduce steady-state and transient multiphysics problems involving parametric fluid dynamics, heat exchange, and neutronics phenomena. For the treatment of structural elements in the hydraulic systems, a porous medium approach has been adopted. The reduction process is data-driven and snapshot information is extracted via POD to learn the solution manifold and to build global spatial basis functions. At the data collection phase, GeN-ROM makes use of the solvers available in GeN-Foam, a similarly OpenFOAM®-based multiphysics framework developed for the analysis of nuclear reactors. The global bases are used both to approximate the solution fields and to project the full-order equations onto lower-dimensional subspaces, thus considerably reducing the number of unknowns in a numerical system. This reduction leads to significant computational speedups, which is ideal for multi-query applications such as uncertainty quantification or design optimization. The developed tool has been tested using a 2D multiphysics model of the Molten Salt Fast Reactor (MSFR) with steady-state and transient scenarios, with speedups on the order of 10 – 10 5 .

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Nondestructive Evaluation of Concrete: Elastic Property Imaging Through Full-Waveform Inversion

Concrete is a vital material in construction—especially in the nuclear industry, where it is used in critical structures such as containment vessels. Over time, concrete can degrade due to harsh operational and environmental conditions, necessitating that its elastic properties be accurately evaluated to ensure structural integrity and safety. Traditional nondestructive evaluation methods such as ultrasound-based techniques often rely on simplifying assumptions that may not hold true for concrete. This paper presents an advanced ultrasound-based method that uses elastic full-waveform inversion (EFWI) to create detailed images of concrete’s mechanical properties. By accurately modeling wave behaviors such as scattering and reflection, we aim to overcome the limitations of conventional ultrasonic-based methods. In this work, the imaging problem involved reconstructing the various elastic properties of a heterogenous concrete block with three steel rebars embedded in it. The ultrasonic measurements were synthetically generated from multiple sources and receivers, and the reconstruction process was performed using a gradient-based optimization algorithm. Our approach leveraged EFWI to reconstruct high-resolution images of the pressure wave speed, shear wave speed, and density. Multiple misfit functions—including L2-norm, cross-correlation (CC), and L1-norm—combined with total variation (TV) regularization and parameter constraints using a Sigmoid function—were explored for the reconstruction. The results demonstrated that using the L1-norm misfit function in conjunction with TV regularization and Sigmoid constraints significantly improved the reconstruction quality in comparison to traditional methods. This approach provided clearer images with fewer artifacts and better captured background heterogeneity. Our findings highlight that, when properly designed, EFWI carries great potential for providing comprehensive, more accurate, and more reliable assessments of concrete conditions, as is crucial for the maintenance and safety of nuclear power plant structures.

97 - MATHEMATICS AND COMPUTING↗
DOE OSTI2022

MISPR : an open-source package for high-throughput multiscale molecular simulations

Computational tools provide a unique opportunity to study and design optimal materials by enhancing our ability to comprehend the connections between their atomistic structure and functional properties. However, designing materials with tailored functionalities is complicated due to the necessity to integrate various computational-chemistry software (not necessarily compatible with one another), the heterogeneous nature of the generated data, and the need to explore vast chemical and parameter spaces. The latter is especially important to avoid bias in scattered data points-based models and derive statistical trends only accessible by systematic datasets. Here, we introduce a robust high-throughput multi-scale computational infrastructure coined MISPR (Materials Informatics for Structure–Property Relationships) that seamlessly integrates classical molecular dynamics (MD) simulations with density functional theory (DFT). By enabling high-performance data analytics and coupling between different methods and scales, MISPR addresses critical challenges arising from the needs of automated workflow management and data provenance recording. The major features of MISPR include automated DFT and MD simulations, error handling, derivation of molecular and ensemble properties, and creation of output databases that organize results from individual calculations to enable reproducibility and transparency. In this work, we describe fully automated DFT workflows implemented in MISPR to compute various properties such as nuclear magnetic resonance chemical shift, binding energy, bond dissociation energy, and redox potential with support for multiple methods such as electron transfer and proton-coupled electron transfer reactions. The infrastructure also enables the characterization of large-scale ensemble properties by providing MD workflows that calculate a wide range of structural and dynamical properties in liquid solutions. MISPR employs the methodologies of materials informatics to facilitate understanding and prediction of phenomenological structure–property relationships, which are crucial to designing novel optimal materials for numerous scientific applications and engineering technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A Risk-Informed Performance-Based Methodology to Manage Fire Protection Systems in Nuclear Facilities

Fire protection systems (FPSs) and features are installed in U.S. Department of Energy (DOE) Hazard Category 1, 2, or 3 nuclear facilities to protect property (maximum possible fire loss thresholds), life, and nuclear safety (i.e., structures, systems, and components). These FPSs and features are designed and maintained in accordance with the prescriptive guidance provided in applicable building codes and National Fire Protection Association codes and standards. Management, operations, and maintenance activities of FPSs involve significant effort. A DOE facility’s documented safety analysis or other safety basis document could also rely on FPSs to provide either a safety significant or safety class function to mitigate fire hazards and minimize radiological consequences. In some cases, the designation of safety significant or safety class may be determined to provide a layer of defense-in-depth to minimize nuclear safety risks independent of the fire risk. DOE standards allow the use of performance-based design alternatives developed by the fire industry but do not consider the defense-in-depth layers of protection provided in DOE facilities to prevent or mitigate the risks associated with unintended release of radioactive materials into the environment. Pacific Northwest National Laboratory developed a decision-making methodology tailored for DOE non-reactor nuclear facilities to manage FPSs and features by integrating nuclear safety risk insights into a performance-based analysis. This risk-informed, performance-based (RIPB) methodology can be used to provide the technical basis for classifying an FPS as safety class and safety significant, tailoring administrative controls (e.g., technical safety requirements), and ranking the importance of FPSs to prioritize maintenance, upgrades, and replacement activities. The RIPB methodology is a graded approach to inform DOE facility owners and Fire Protection Program managers of the most risk-significant FPSs and equipment, and those systems would be cost-beneficial to relax rigor if there is a need to re-design the FPS coverage or deviate from DOE and National Fire Protection Association standards for those systems that would be less significant. This paper describes the framework used to develop the RIPB methodology and the outcome of implementing this methodology in a use-case nuclear facility. This paper also discusses the impact to DOE policies and standards and the safety margins and defense-in-depth measures credited in nuclear safety assessments in a facility’s documented safety analysis and the benefits of implementing an RIPB methodology in lieu of a prescriptive method to comply with fire protection requirements.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗