Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nanoscience”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Self-Assembly of a Linear Alkylamine Bilayer around a Cu Nanocrystal: Molecular Dynamics

Copper nanocrystals are often grown with the help of alkylamine capping agents, which direct the nanocrystal shape. However, the role of these molecules is still unclear. We characterized the assembly of aqueous tetradecylamine (TDA) around a Cu nanocrystal and found that TDA exhibits a temperature-dependent bilayer structure. The bilayer involves an inner layer, in which TDA binds to Cu via the amine group and tends to orient the alkyl tail perpendicular to the surface, and an outer layer whose structure depends on temperature. At low temperatures, alkylamines in the inner layer form bundles with no apparent relation to the crystal facets. Alkylamines in the outer layer tend to orient their long axes perpendicular to the Cu surfaces, with interdigitation into the inner layer. At high temperatures, alkylamines in the inner layer lose their bundle structure, and outer-layer alkylamines tend to orient themselves tangential to the Cu surfaces, forming a “web” above inner-layer TDA. TDA exhibits a rapid interlayer exchange at typical synthesis temperatures, consistent with experiment. Here, the variety in the assemblies seen here and in other studies of alkanethiols around gold nanocrystals indicates a richness in the assemblies that can be achieved by modulating the interaction between the strongly binding end group and the surface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

First-Principles Study on the Electronic Properties of PDPP-Based Conjugated Polymer via Density Functional Theory

In this study, we focus on computational predictions of the electronic and optical properties of a one-dimensional periodic model of a single chain of a diketopyrrolopyrrole (DPP)-based conjugated polymer (PDPP3T) as a function of electronic configuration changes due to charge injection. Here, we employ density functional theory (DFT) to explore the ground-state and excited-state electronic properties as well as optical properties influenced by charge injection. We utilize both the Heyd–Scuseria–Ernzerhof (HSE06) and Perdew–Burke–Ernzerhof (PBE) functionals to predict the band gap and compute the absorption spectrum. Our DFT results point out that utilizing the HSE06 functional in conjunction with momentum sampling over the Brillouin zone can appropriately predict the band gap and absorption spectrum in good agreement with experimental data. Moreover, we explore the influence of charge-carrier injection on the electronic configuration of the PDPP3T polymer. Our results indicate that the injection of charge carriers into the PDPP3T semiconducting polymer model greatly affects the electrical properties and ends in a low band gap and high mobility of charge carriers in PDPP3T polymers, offering the potential to tailor the material electronic performance for organic photovoltaic and optoelectronic device applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Enhancing Nanoparticle Detection in Interferometric Scattering (iSCAT) Microscopy Using a Mask R-CNN

Interferometric scattering microscopy (iSCAT) is a label-free optical microscopy technique that enables imaging of individual nano-objects such as nanoparticles, viruses, and proteins. Essential to this technique is the suppression of background scattering and identification of signals from nano-objects. In the presence of substrates with high roughness, scattering heterogeneities in the background, when coupled with tiny stage movements, cause features in the background to be manifested in background-suppressed iSCAT images. Traditional computer vision algorithms detect these background features as particles, limiting the accuracy of object detection in iSCAT experiments. Here, in this paper, we present a pathway to improve particle detection in such situations using supervised machine learning via a mask region-based convolutional neural network (mask R-CNN). Using a model iSCAT experiment of 19.2 nm gold nanoparticles adsorbing to a rough layer-by-layer polyelectrolyte film, we develop a method to generate labeled datasets using experimental background images and simulated particle signals and train the mask R-CNN using limited computational resources via transfer learning. We then compare the performance of the mask R-CNN trained with and without inclusion of experimental backgrounds in the dataset against that of a traditional computer vision object detection algorithm, Haar-like feature detection, by analyzing data from the model experiment. Results demonstrate that including representative backgrounds in training datasets improved the mask R-CNN in differentiating between background and particle signals and elevated performance by markedly reducing false positives. The methodology for creating a labeled dataset with representative experimental backgrounds and simulated signals facilitates the application of machine learning in iSCAT experiments with strong background scattering and thus provides a useful workflow for future researchers to improve their image processing capabilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Reversible Formation of Silanol Groups in Two-Dimensional Siliceous Nanomaterials under Mild Hydrothermal Conditions

Monitoring the effects of mild hydrothermal conditions, in situ, on siliceous materials remains challenging using surface science techniques, which often require electrically conductive substrates. The emergence of two-dimensional (2-D) siliceous nanomaterials deposited on metal single crystals overcomes this limitation. Here, we use infrared reflection absorption spectroscopy (IRRAS) to study the effects of mild hydrothermal conditions, in situ, on 2-D model systems, namely, all-Si MFI nanosheets supported on Au(111) and a polymorphous bilayer silicate supported on Ru(0001). We find that the formation of silanol groups (SiOH) occurs at 473 and 573 K under a H 2 O pressure of 3 mbar in the MFI nanosheets, but not in the polymorphous bilayer silicate. The effects of mild hydrothermal conditions are reversible in the MFI nanosheets and do not result in framework degradation. Implications shown here provide a fundamental understanding of the impact of mild hydrothermal conditions on the 2-D siliceous nanomaterials and serve as a starting point when considering these effects on three-dimensional (3-D) ones.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

High Pressure Infiltration/Expulsion of Aqueous NaCl in Planar Hydrophobic Nanopores

Pressure-driven permeation of water in a poorly wettable material results in a conversion of mechanical work into surface free energy representing a new form of energy storage, or absorption. When water is replaced by a concentrated electrolyte solution, the storage capacity of a nanoporous medium becomes comparable to high-end supercapacitors. The addition of salt can also reduce the hysteresis of the infiltration/expulsion cycle. Our molecular simulations provide a theoretical perspective into the mechanisms involved in the process, and underlying structures and interactions in compressed nanoconfined solutions. Specifically, we consider aqueous NaCl in planar confinements of widths of 1.0 nm and 1.64 nm and pressures of up to 3 kbar. Open ensemble Monte Carlo simulations utilizing fractional exchanges of molecules for efficient additions/removal of ions have been utilized in conjunction with pressure-dependent chemical potentials to model bulk phases under pressure. Confinements open to these pressurized bulk, aqueous electrolyte phases show reversibility at narrow pore sizes and irreversibility in wider ones, consistent with experiment, as well as strong hysteresis at both pore size. The addition of salt results in significant increases in the solid/liquid interfacial tension in narrower pores and associated infiltration and expulsion pressures. Furthermore, these changes are consistent with strong desalination effects at the lower pore size observed irrespective of external pressure and initial concentration.

25 ENERGY STORAGE↗
DOE OSTI2020

Predicting the Rate of Homogeneous Intermetallic Nucleation within Steep Composition Gradients

Simulations of isothermal homogeneous nucleation from deeply undercooled amorphous melts exhibit systematic variations in nucleation behavior depending upon the strength of an imposed composition gradient. Data from molecular dynamics (MD) simulations in a model Ni/Al system permit quantification of the nucleation rate of the NiAl-B2 intermetallic phase and indicate that nucleation proceeds in a polymorphous mode. The nucleation rate decreases with increasing gradient, and nucleation is completely suppressed above a critical gradient. Based on an argument of crystal nucleus stability, a simple estimate provides good prediction of the critical gradient. Here, a modified classical nucleation model parameterized with thermodynamic and kinetic quantities calculated independently predicts the nucleation rates and their variation with the imposed gradient, matching the MD results very well.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Extremely Slow Trap-Mediated Hole Relaxation in Room-Temperature InP/ZnSe/ZnS Quantum Dots

Time-resolved photoluminescence (PL) and transient absorption (TA) spectroscopy have been used to elucidate the hole relaxation dynamics in high-quality InP/ZnSe/ZnS quantum dots (QDs) at room temperature. In QDs having an In/P ratio close to 1:1, hole cooling is fast compared to the ~40 ps time-correlated photon-counting instrument response. However, in QDs that luminesce at wavelengths greater than around 600 nm and have excess indium, a significant fraction of the PL exhibits a slower rise time. In this case, the PL rises over a range of timescales varying from close to the instrument response to approximately 300–400 ps. The time constant of the slowest component increases with increasing InP core size and the fraction of the PL that has the slow rise time increases with excess indium in the particle. In all cases, a slow rise time and any spectral evolution on that timescale are absent in the TA results, indicating that the slow dynamics may be assigned to relaxation in the valence band. QDs emitting at wavelengths below 560 nm show very different dynamics, exhibiting a barely detectable <50 ps rise time. Based on these results and measured elemental compositions, the slow hole relaxation is assigned to the transient population of indium-based traps in the ZnSe shell that are above the valence band edge only for the larger, red-emitting QDs. Here, the relative trap to band edge relaxation rates can be understood in terms of effective mass approximation hole wave function calculations, which show that the relaxation rate is largely determined by the extent to which the hole wave function in the lowest exciton penetrates into the ZnSe shell, overlapping the trapped-hole wave functions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Plasmonics-Enhanced UV Photocatalytic Water Purification

Titanium dioxide (TiO 2 ) is commonly used for photocatalytic decomposition of organic contaminants for the purpose of water purification. One promising method to enhance TiO 2 photocatalysis is the incorporation of surface plasmon resonance on its surface where photocatalytic reactions take place. Herein, a novel methodology using plasmonically tuned aluminum nanostructures to enhance the rate of photodecomposition of aqueous methyl orange is demonstrated. These nanostructures are tuned to the TiO 2 band gap in the UV regime and patterned on TiO 2 -coated substrates using nanosphere lithography. Compared to a blank TiO 2 film, the plasmonics is found to enhance the initial TiO 2 photocatalytic rate by up to 10 times, and further enhancement is possible upon refinement of the plasmonic technology.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Resonance Raman Study of Shell Morphology in InP/ZnSe/ZnS Core/Shell/Shell Nanocrystals

Resonance Raman spectra and absolute cross sections of InP/ZnSe/ZnS core/shell/shell nanocrystals have been obtained at excitation wavelengths of 501.7, 457.9, and 410 nm. Eight different structures having nearly the same lowest excitonic absorption wavelength but significantly different stoichiometries are compared. The Raman spectra show phonon features attributable to both the InP core and the ZnSe shell. The largest differences among the structures are seen in the ZnSe phonon region by using excitation at 457.9 nm, on the low-energy edge of the absorption features having significant contributions from the ZnSe shell. Here, structures that are nearly stoichiometric (In:P ratio ≈1.0) show a sharp, strongly polarized peak near the bulk ZnSe phonon frequency (~250 cm –1 ) and a weak lower-frequency shoulder with a higher depolarization ratio. Structures having excess indium show a stronger low-frequency shoulder near 225 cm –1 and lower integrated Raman intensities throughout the ZnSe phonon region. These changes are attributed to the presence of indium atoms in the ZnSe shell. Furthermore, these results support a previous assignment of a slow rise component in the time-resolved photoluminescence spectra of nonstoichiometric structures to transient trapping of holes at indium defects in the shell.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Vapor-Phase Intercalation of Cesium into Black Phosphorous

Cesium vapors were charged into black phosphorous (BP) flakes at varied times and at a temperature gradient of 150 °C. The X-ray diffraction (XRD) measurements of these samples suggest a reduction in the strength of van der Waal interactions between BP layers leading to the loss of coherence of out-of-plane peaks. At the same time, the three main Raman modes of BP (A g 1 , B 2 g , and A g 2 ) steadily redshifted as exposure times were increased, with modes B 2 g and A g 2 shifting faster than A g 1 . After initial rapid downshifts of active BP phonon modes, this intercalation strategy showed its limits following prolonged exposure times. Saturation of BP flakes by Cs vapors ensued and the kinetics was fitted with an exponential decay function. Furthermore, the thermoelectric power (TEP) of cesiated BP exhibited an inversion in sign from positive to negative around 400 K, lending credence to the transformation of as-prepared BP which is a p-type semiconductor to an n-type equivalent due to Cs atom intercalation driven shifting of the Fermi level toward the conduction band of BP and the donation of electrons from Cs. Furthermore, density functional theory (DFT) calculations were used to delve deeper into understanding Cs intercalation on the structural evolution of BP.

36 MATERIALS SCIENCE↗
DOE OSTI2022

In Situ EXAFS-Based Nanothermometry of Heterodimer Nanocrystals under Induction Heating

The ability to heat nanocrystalline materials through magnetic induction has been used in the fields of catalysis, biomedical sciences, and polymer degradation. However, the working temperature to which the inductively coupled material rises is still poorly understood. Herein, we use extended X-ray absorption fine structure spectroscopy in conjunction with thermal imaging to improve the understanding of heating in inductively coupled systems. After extraction of the Debye–Waller factor from the spectroscopy, we obtain the temperature of inductively heated nanocrystals from the correlated Debye model. We combine carbon-supported iron oxide nanocrystals as induction heating agents with platinum nanocrystals as thermal probes. By testing these nanocrystal species as both unattached nanocrystals and heterodimers, we report that nanostructured systems show a significant temperature difference of up to 73.60 °C when compared to their local support environment. Furthermore, this result has implications for inductively heated catalysis, magnetic hyperthermia for targeted cell death, and polymer synthesis.

09 BIOMASS FUELS↗
DOE OSTI2022

Photo-Induced Charge Transfer of Fullerene and Non-Fullerene Conjugated Polymer Blends via Ab Initio Excited-State Dynamics

Organic conjugated polymers (CPs) are promising candidates for organic photovoltaic (OPV) devices due to their unique tunable mechanical and optoelectronic performance. Over the last decade, optoelectronic properties of narrow band gap CPs as a blend with acceptor units are largely optimized, which leads to noticeable progress in OPV technology. However, their power conversion efficiency is still lower than their organic counterparts (i.e., silicon), limiting their practical usage. In this study, we employ ab initio molecular dynamics to explore photo-induced charge transfer (CT) of the diketopyrrolopyrrole-based polymer as a blend with non-fullerene (i.e., ITIC) and fullerene (i.e., PCBM) acceptor units. The results of charge carrier dynamics induced by selected photoexcitation show that hole density redistribution in space is much faster than electron relaxation. We track the relaxation rates of charge carriers over time, where the derivative of the difference between the rate of electron and hole implies the current density at zero voltage. Furthermore, this can be utilized to characterize the CT performance of CPs blended with different acceptor units. Relaxation rate results indicate that CP blend with ITIC promises a better PV performance, illustrating that the current computational approach opens the door to determine bulk heterojunctions’ electronic performance for OPV devices and narrowing down the list of potential donor–acceptor candidates.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Structure of Water Adsorbed on Nanocrystalline Calcium Silicate Hydrate Determined from Neutron Scattering and Molecular Dynamics Simulations

Calcium silicate hydrate (C-S-H) is a disordered, nanocrystalline material that acts as a primary binding phase in Portland cement. Thin films of water are present on the surfaces and in nanopores of C-S-H, impacting many of its chemical and mechanical properties, such as ion transport, creep, or thermal behavior. Despite decades of research, a full understanding of the structural details of adsorbed, confined, and bulk water in C-S-H remains elusive. In this work, we applied a multitechnique study involving molecular dynamics (MD) simulations validated by neutron diffraction with isotopic substitution (NDIS) and X-ray scattering methods to investigate the structure of water in C-S-H and C-A-S-H (an Al-bearing, low-CO 2 C-S-H substitute). Direct comparison of NDIS data with the MD results reveals that the structure of confined and interfacial water differs significantly from the bulk water and exhibits a larger degree of mesoscale ordering for more hydrated C-S-H structures. As a result, this observation suggests an important role of water as a stabilizer of the atomistic-level structure of C-S-H.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of Gold Catalyst Surface Morphology on Wetting Behavior and Electrochemical CO 2 Reduction Performance in a Large-Area Zero-Gap Gas Diffusion Electrolyzer

We report catalyst surface area and wetting behavior are key factors in determining the performance of gas diffusion electrode (GDE) electrolyzers for electrochemical CO 2 reduction. In this work, we report the integration of sub-1 μm thick nanoporous gold (npAu) catalyst coatings into a large-area (25 cm 2 ) zero-gap electrolyzer. The npAu coatings were prepared by magnetron sputtering (MS) of thin AgAu alloy films on the microporous carbon layer of a gas diffusion layer (GDL) followed by Ag leaching. Compared to MS Au films of the same thickness, npAu catalyst coatings enable higher Faradaic efficiencies and improved catalyst stability for CO 2 -to-CO reduction with Faradaic efficiencies of up to 88% at 100 mA/cm 2 . For a 800 nm npAu coating, the device level energy efficiency for CO 2 to CO conversion reaches 45% (52% for CO + H 2 ) at 100 mA/cm 2 with a single pass CO 2 conversion efficiency of ~12%. Contact angle measurements reveal that npAu coatings provide a more hydrophobic electrode interface compared to MS Au coatings, suggesting that the more hydrophobic interfacial environment of npAu coatings helps mitigating electrode flooding which is associated with performance deterioration over time.

30 DIRECT ENERGY CONVERSION↗