SEARCH · Engineering Papers

Results for “motion correction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

All sources NASA NTRS DOE OSTI

NASA NTRS1979

Some flight data extraction techniques used on a general aviation spin research aircraft

Some methods for obtaining flight data from a highly instrumented general aviation spin research aircraft are developed and illustrated. The required correction terms for the measurement of body accelerations, body velocities, and aircraft orientation are presented. In addition, the equations of motion are utilized to derive total aerodynamic coefficients for comparison with model tests and for analysis. Flight test experience is used to evaluate the utility of various instruments and calculation techniques for spin research.

Sliwa, S. M.↗

NASA NTRS1982

Scanner imaging systems, aircraft

The causes and effects of distortion in aircraft scanner data are reviewed and an approach to reduce distortions by modelling the effect of aircraft motion on the scanner scene is discussed. With the advent of advanced satellite borne scanner systems, the geometric and radiometric correction of aircraft scanner data has become increasingly important. Corrections are needed to reliably simulate observations obtained by such systems for purposes of evaluation. It is found that if sufficient navigational information is available, aircraft scanner coordinates may be related very precisely to planimetric ground coordinates. However, the potential for a multivalue remapping transformation (i.e., scan lines crossing each other), adds an inherent uncertainty, to any radiometric resampling scheme, which is dependent on the precise geometry of the scan and ground pattern.

Ungar, S. G.↗

NASA NTRS1985

Calculation of water drop trajectories to and about arbitrary three-dimensional lifting and nonlifting bodies in potential airflow

Subsonic, external flow about nonlifting bodies, lifting bodies or combinations of lifting and nonlifting bodies is calculated by a modified version of the Hess lifting code. Trajectory calculations can be performed for any atmospheric conditions and for all water drop sizes, from the smallest cloud droplet to large raindrops. Experimental water drop drag relations are used in the water drop equations of motion and effects of gravity settling are included. Inlet flow can be accommodated, and high Mach number compressibility effects are corrected for approximately. Seven codes are described: (1) a code used to debug and plot body surface description data; (2) a code that processes the body surface data to yield the potential flow field; (3) a code that computes flow velocities at arrays of points in space; (4) a code that computes water drop trajectories from an array of points in space; (5) a code that computes water drop trajectories and fluxes to arbitrary target points; (6) a code that computes water drop trajectories tangent to the body; and (7) a code that produces stereo pair plots which include both the body and trajectories. Accuracy of the calculations is discussed, and trajectory calculation results are compared with prior calculations and with experimental data.

Norment, H. G.↗

NASA NTRS1997

Rubidium Ultra-Stable Oscillators at Titan: The Huygens Doppler Wind Experiment

The Doppler Wind Experiment (DWE) is one of six investigations to be performed during the Titan atmospheric descent of the ESA Huygens Probe. The primary scientific objective is to measure the direction and strength of Titan's zonal winds with an accuracy better than 1 m/s. The Probe's wind-induced horizontal motion will be derived from the residual Doppler shift of its S-band radio link to the Cassini Orbiter, corrected for all known orbit and propagation effects, from the beginning of the mission (altitude: approx. 160 km) down to impact on the surface. The DWE Instrumentation consists of Rb-based Ultra-Stable Oscillators used to: (1) generate the transmitted signal from the Probe and (2) extract the frequency of the received signal on the Orbiter. The capabilities of these USOs under the rugged experimental conditions on Titan and some results from the DWE pre-launch test program are described.

Bird, M. K.↗

NASA NTRS2000

On the Coupling of CDISC Design Method with FPX Rotor Code

A rotor section aerodynamics design package is developed by coupling Constrained Direct Iterative Surface Curvature (CDISC) design method with the FPX rotor code. The coupling between the CDISC design and the FPX flow analysis is fully automated. The CDISC design method employs a predictor-corrector procedure iteratively to determine a surface geometry which produces a target pressure distribution, where the target pressure distributions is either pre-defined or automatically generated through flow and geometry constraints. The FPX code is an eXtended Full-Potential rotor Computational Fluid Dynamics (CFD) code, which solves the three-dimensional unsteady full-potential equation in a strong conservative form using an implicit approximate factorization finite-difference scheme with entropy and viscosity corrections. Application of the CDISC design method coupled with the FPX rotor code is made for rotor blades in hovering motions. Several design examples are presented to demonstrate the capability of the new package in rotor section design.

Hu, Hong↗

NASA NTRS2002

Probing the Masses of the PSR JO621+1002 Binary System Through Relativistic Apsidal Motion

Orbital, spin and astrometric parameters of the millisecond pulsar PSR J0621+1002 have been determined through six years of timing observations at three radio telescopes. The chief result is a measurement of the rate of periastron advance, omega=0 deg.0116 +/-0 deg.0008/yr. Interpreted as a general relativistic effect, this implies the sum of the pulsar mass, m(1), and the companion mass, m(2), to be M=m(1)+m(2)= 2.81 +/-0.30 solar mass. The Keplerian parameters rule out certain combinations of m(1) and m(2), as does the non-detection of Shapiro delay in the pulse arrival times. These constraints, together with the assumption that the companion is a white dwarf, lead to the maximum likelihood values m(1)=1.69((sup +0.30)(sub -0.30)) solar mass and m(2)=0.98((sup +0.32)(sub -0.12) solar mass (68% confidence). The other major finding is that the pulsar experiences dramatic variability in its dispersion measure (DM), with gradients as steep as 0.013 pc/cu cm/yr. A structure function analysis of the DM variations uncovers spatial fluctuations in the interstellar electron density that cannot be fit to a single power law, unlike the Kolmogorov turbulent spectrum that has been seen in the direction of other pulsars. Other results from the timing analysis include the first measurements of the pulsar's proper motion, mu=3.5+/-0.3 mas/yr, and of its spin-down rate, dP/dt=4.7 x 10(exp -20), which, when corrected for kinematic biases and combined with the pulse period, P=28.8 ms, gives a characteristic age of 1.1 x 10(exp 10) yr and a surface magnetic field strength of 1.2 x 10 (exp 9) G.

Spaver, Eric M.↗

NASA NTRS1990

Magnetic translator bearings

A magnetic bearing system for enabling translational motion includes a carriage and a shaft for movably supporting the carriage; a first magnetic bearing fixed to one of the carriage and shaft and slidably received in a first channel of the other of the carriage and shaft. The first channel is generally U shaped with two side walls and a back wall. The magnetic bearing includes a pair of spaced magnetic pole pieces, each pole piece having a pair of electromagnetic coils mounted on poles on opposite ends of the pole piece proximate the side walls, and a third electromagnetic coil mounted on a pole of the pole piece proximate the backwall; a motion sensor for sensing translational motion along two axes and rotationally about three axes of the carriage and shaft relative to each other; and a correction circuit responsive to the sensor for generating a correction signal to drive the coils to compensate for any misalignment sensed between the carriage and the shaft.

Hockney, Richard L.↗

NASA NTRS1976

Effect of modified aerodynamic strip theories on rotor blade aeroelastic stability

Various existing unsteady aerodynamic strip theories which have been developed in the past for both fixed and rotary wing aeroelastic analyses are modified in the paper so as to make them applicable to the coupled flap-lag-torsional aeroelastic problem of a rotor blade in hover. These corrections are primarily due to constant angle of attack, constant inflow and variable free stream velocity due to lead-lag motion. Next, the modified strip theories are incorporated in a coupled flap-lag-torsional aeroelastic analysis of the rotor blade in hover and the sensitivity of the aeroelastic stability boundaries to the aerodynamic assumptions is examined.

Friedmann, P.↗

NASA NTRS1981

Solar Maximum Mission experiment - Initial observations by the active cavity radiometer

The Active Cavity Radiometer on board the SMM is providing high-quality measurements of the solar irradiance. After correction for the solar distance, the orbital displacement of the satellite, and the relativistic shift of irradiance due to the satellite motion, the observed standard deviation is in the range 10-15 parts per million in a 96-minute integration. Measurable solar variations occur on time scales of a few minutes to a few days. The total amplitude of the variations in the daily averages from February 16 to March 31, 1980, was 0.10% based upon 96-minute averages.

Willson, R. C.↗

NASA NTRS1992

Criterion for convection in an inhomogeneous star

To resolve the question of whether the Schwarzschild criterion or the Ledoux criterion should be used to test for convective instability in a star, a well-observed cluster of chemically inhomogeneous massive stars, in which the choice of the criterion for convection makes a crucial and easily observable difference, is required. NGC 330, a metal-poor cluster in the Small Magellanic Cloud, is ideal for this test. Its large evolved stellar population contains both blue and red supergiants, of which its many red supergiants should be absent if a gradient of mean molecular weight did not choke off rapid convective motions in the inhomogeneous region connecting the envelope and core. Thus the Ledoux criterion for convection is strongly indicated as being correct.

Stothers, Richard B.↗

NASA NTRS2005

Brain-Computer Interfaces for 1-D and 2-D Cursor Control: Designs Using Volitional Control of the EEG Spectrum or Steady-State Visual Evoked Potentials

We have developed and tested two EEG-based brain-computer interfaces (BCI) for users to control a cursor on a computer display. Our system uses an adaptive algorithm, based on kernel partial least squares classification (KPLS), to associate patterns in multichannel EEG frequency spectra with cursor controls. Our first BCI, Target Practice, is a system for one-dimensional device control, in which participants use biofeedback to learn voluntary control of their EEG spectra. Target Practice uses a KF LS classifier to map power spectra of 30-electrode EEG signals to rightward or leftward position of a moving cursor on a computer display. Three subjects learned to control motion of a cursor on a video display in multiple blocks of 60 trials over periods of up to six weeks. The best subject s average skill in correct selection of the cursor direction grew from 58% to 88% after 13 training sessions. Target Practice also implements online control of two artifact sources: a) removal of ocular artifact by linear subtraction of wavelet-smoothed vertical and horizontal EOG signals, b) control of muscle artifact by inhibition of BCI training during periods of relatively high power in the 40-64 Hz band. The second BCI, Think Pointer, is a system for two-dimensional cursor control. Steady-state visual evoked potentials (SSVEP) are triggered by four flickering checkerboard stimuli located in narrow strips at each edge of the display. The user attends to one of the four beacons to initiate motion in the desired direction. The SSVEP signals are recorded from eight electrodes located over the occipital region. A KPLS classifier is individually calibrated to map multichannel frequency bands of the SSVEP signals to right-left or up-down motion of a cursor on a computer display. The display stops moving when the user attends to a central fixation point. As for Target Practice, Think Pointer also implements wavelet-based online removal of ocular artifact; however, in Think Pointer muscle artifact is controlled via adaptive normalization of the SSVEP. Training of the classifier requires about three minutes. We have tested our system in real-time operation in three human subjects. Across subjects and sessions, control accuracy ranged from 80% to 100% correct with lags of 1-5 seconds for movement initiation and turning.

Trejo, Leonard J.↗

DOE OSTI2022

Correcting for digital image correlation speckle inversion at high temperature using color cameras

Digital image correlation (DIC) is a popular, noncontacting technique to measure full-field deformation by using cameras to track the motion of an applied surface pattern. Because it is noncontacting, DIC can be performed for extreme temperature applications (e.g., hot-fire rocket testing of carbon composite rocket nozzles) under harsh conditions during which bonded gauges are damaged. Speckle pattern inversion is a phenomenon that sometimes occurs while performing high-temperature DIC. During speckle pattern inversion, portions of the surface pattern that were initially darker at room temperature (e.g., graphite) may emit more light due to blackbody radiation than the portions that were initially paler, thereby producing images in which the pattern appears inverted at high temperature relative to the initial pattern at room temperature. This phenomenon can prevent the correlation algorithm from being able to resolve the displacements between images. This work compares three methods to mitigate speckle pattern inversion: (A) the subtraction method, a recently-published technique in which two high-temperature images are subtracted to remove unwanted light; (B) the filtering method, a popular technique in which optical bandpass filters screen out unwanted light; and (C) the histogram rescaling method, a proposed new method that pairs a color camera with a blue light source and uses information from the green sensor of the camera to correct against inversion in the blue sensor through postprocessing. The histogram rescaling method is shown to successfully eliminate speckle pattern inversion and has the added advantages that it does not require quasi-static loading to be able to compensate for speckle pattern inversion, nor does it impose thick-glass distortions caused by the optical filter.

Rowley, Lindsey J.↗

NASA NTRS1998

Kinematics of the New Zealand Plate Boundary: Relative Motion by GPS Across Networks of 1000 km and 50 km Spacing

From the 1995-97 data we are able to estimate interseismic velocities - the original aim of the project - though corrections must first be made for the coseismic effects of the Cass earthquake and postseismic effects of the Arthur's Pass event. In the following, we present four sets of results: (1) Interseismic velocities, (2) Arthur's Pass earthquake - coseismic, (3) Cass earthquake, and (4) Arthur's Pass earthquake postseismic. Work on all these fronts is still incomplete, but is being actively continued with funding from the NZ Foundation for Research, Science and Technology (FRST).

Scholz, Chris↗

NASA NTRS1999

On-Line Fringe Tracking and Prediction at IOTA

The Infrared/Optical Telescope Array (IOTA) is a multi-aperture Michelson interferometer located on Mt. Hopkins near Tucson, Arizona. To enable viewing of fainter targets, an on-line fringe tracking system is presently under development at NASA Ames Research Center. The system has been developed off-line using actual data from IOTA, and is presently undergoing on-line implementation at IOTA. The system has two parts: (1) a fringe tracking system that identifies the center of a fringe packet by fitting a parametric model to the data; and (2) a fringe packet motion prediction system that uses characteristics of past fringe packets to predict fringe packet motion. Combined, this information will be used to optimize on-line the scanning trajectory, resulting in improved visibility of faint targets. Fringe packet identification is highly accurate and robust (99% of the 4000 fringe packets were identified correctly, the remaining 1% were either out of the scan range or too noisy to be seen) and is performed in 30-90 milliseconds on a Pentium II-based computer. Fringe packet prediction, currently performed using an adaptive linear predictor, delivers a 10% improvement over the baseline of predicting no motion.

Wilson, Edward↗

NASA NTRS2016

Tangle-Free Mesh Motion for Ablation Simulations

Problems involving mesh motion-which should not be mistakenly associated with moving mesh methods, a class of adaptive mesh redistribution techniques-are of critical importance in numerical simulations of the thermal response of melting and ablative materials. Ablation is the process by which material vaporizes or otherwise erodes due to strong heating. Accurate modeling of such materials is of the utmost importance in design of passive thermal protection systems ("heatshields") for spacecraft, the layer of the vehicle that ensures survival of crew and craft during re-entry. In an explicit mesh motion approach, a complete thermal solve is first performed. Afterwards, the thermal response is used to determine surface recession rates. These values are then used to generate boundary conditions for an a posteriori correction designed to update the location of the mesh nodes. Most often, linear elastic or biharmonic equations are used to model this material response, traditionally in a finite element framework so that complex geometries can be simulated. A simple scheme for moving the boundary nodes involves receding along the surface normals. However, for all but the simplest problem geometries, evolution in time following such a scheme will eventually bring the mesh to intersect and "tangle" with itself, inducing failure. This presentation demonstrates a comprehensive and sophisticated scheme that analyzes the local geometry of each node with help from user-provided clues to eliminate the tangle and enable simulations on a wide-class of difficult problem geometries. The method developed is demonstrated for linear elastic equations but is general enough that it may be adapted to other modeling equations. The presentation will explicate the inner workings of the tangle-free mesh motion algorithm for both two and three-dimensional meshes. It will show abstract examples of the method's success, including a verification problem that demonstrates its accuracy and correctness. The focus of the presentation will be on the algorithm; specifics on how the techniques may be used in spacecraft design will be not discussed.

Droba, Justin↗

NASA NTRS1983

The geometric correction of Landsat-type imagery using perturbation techniques

A method for geometric correction data calculation is based on decomposition of image distortions into nominal distortions and perturbations, caused by deviations from the nominal spacecraft motion and sensor pointing. The maximal errors of the method are of the order of 5 m, and the average errors are less than 0.6 m (sigma).

Levine, I.↗

NASA NTRS1983

The microwave opacity of Saturn's rings at wavelengths of 3.6 and 13 cm from Voyager 1 radio occultation

Information obtained about Saturn's rings through radio occultation observations with Voyager 1 is discussed. The experimental aspects are addressed, including the positional relationships and relative motions of the spacecraft, rings, and earth, the radio system, observables, microwave opacity, and diffraction. The data characteristics, reduction procedures, calibrations, and corrections are described, and results are presented for the opacity, complex extinction, and diffraction. Ring C is found to exhibit a gently undulating structure of normal opacity, except for several narrow imbedded ringlets. The normalized differential opacity indicates a substantial fraction of centimeter-size particles. In the Cassini division, the opacity appears to be nearly independent of wavelength. Ring A appears to be nearly homogeneous over much of its width, but with considerable thickening near its inner boundary with the Cassini division.

Tyler, G. L.↗

NASA NTRS1981

Pinhole/coronograph pointing control system integration and noise reduction analysis

The Pinhole Occulter Facility (P/OF) is a Space Shuttle based experiment for the production of solar coronographics and hard X-ray images. The system is basically pinhole camera utilizing a deployable 50-m flexible boom for separating the pinholes and coronograph shields from the recording devices located in the Shuttle bay. At the distal end of the boom from the Shuttle is a 25 kg mask containing pinholes and coronograph shields. At the proximal end the detectors are located and mounted, along with the deployable boom, to the ASPS gimbal pointing system (AGS). The mask must be pointed at the Sun with a high degree of pointing stability and accuracy to align the axes of the detectors with the pinholes and shields. Failure to do so will result in a blurring of the images on the detectors and a loss of resolution. Being a Shuttle based experiment, the system will be subjected to the disturbances of the Shuttle. The worst of these is thruster firing for orbit correction; the Shuttle uses a bang-bang thruster control system to maintain orbit to within preset limits. Other disturbances include man motion, motion induced by other systems, and gravity gradient torques.

Greene, M.↗