Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “morphology evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

Deuterostome evolution: early development in the enteropneust hemichordate, Ptychodera flava

Molecular and morphological comparisons indicate that the Echinodermata and Hemichordata represent closely related sister-phyla within the Deuterostomia. Much less is known about the development of the hemichordates compared to other deuterostomes. For the first time, cell lineage analyses have been carried out for an indirect-developing representative of the enteropneust hemichordates, Ptychodera flava. Single blastomeres were iontophoretically labeled with Dil at the 2- through 16-cell stages, and their fates followed through development to the tornaria larval stage. The early cleavage pattern of P. flava is similar to that of the direct-developing hemichordate, Saccoglossus kowalevskii, as well as that displayed by indirect-developing echinoids. The 16-celled embryo contains eight animal "mesomeres," four slightly larger "macromeres," and four somewhat smaller vegetal "micromeres." The first cleavage plane was not found to bear one specific relationship relative to the larval dorsoventral axis. Although individual blastomeres generate discrete clones of cells, the appearance and exact locations of these clones are variable with respect to the embryonic dorsoventral and bilateral axes. The eight animal mesomeres generate anterior (animal) ectoderm of the larva, which includes the apical organ; however, contributions to the apical organ were found to be variable as only a subset of the animal blastomeres end up contributing to its formation and this varies from embryo to embryo. The macromeres generate posterior larval ectoderm, and the vegetal micromeres form all the internal, endomesodermal tissues. These blastomere contributions are similar to those found during development of the only other hemichordate studied, the direct-developing enteropneust, S. kowalevskii. Finally, isolated blastomeres prepared at either the two- or the four-cell stage are capable of forming normal-appearing, miniature tornaria larvae. These findings indicate that the fates of these cells and embryonic dorsoventral axial properties are not committed at these early stages of development. Comparisons with the developmental programs of other deuterostome phyla allow one to speculate on the conservation of some key developmental events/mechanisms and propose basal character states shared by the ancestor of echinoderms and hemichordates.

NASA Discipline Evolutionary Biology↗
NASA NTRS1973

Studies related to the evolution of the lunar soil materials

Studies of the chemistry and morphology of the lunar samples are reported. The presence of fragments of plagoclase in the centers of the impact craters indicate that the glass spheres were derived by meteoritic impact from high velocity particles, while the glass was at high temperatures. From the study of the Apollo 16 samples, it is suggested that this material was formed in a hot impact ejecta blanket, or in an igneous environment, and later exposed to meteoritic impact. It is suggested that particles from Apollo 17 were formed in a cloud of siliceous vapors.

Carter, J. L.↗
NASA NTRS1977

Crater degradation on Mercury and the moon - Clues to surface evolution

A preliminary investigation was conducted regarding the variations in the morphological characteristics of Mercurian craters that appear to be associated with a degradation of fresh craters. Craters are classified according to relative states of degradation in order to provide evidence on degradation styles and rates on Mercury, and to correlate degradation with major geologic events in the history of the planet. Processes and relative rates of degradation on Mercury and the moon are also compared. Degradation trends of crater morphology are found to be parallel on Mercury and the moon. The severe destruction of interior structures in lunar craters may have resulted from more widespread distribution of ejecta due to the moon's lower gravity. The possibility is considered that the smooth plains on the surface of Mercury were formed early in the history of that planet.

Wood, C. A.↗
NASA NTRS1990

Tectonic evolution of Eastern Ishtar Terra, Venus

Tectonic deformation is cited as the cause for the complex morphology and topography of Eastern Ishtar Terra. A number of models proposed to account for this deformation are reviewed, and their predictions for the geology of Fortuna Tessera are examined. The detailed geology, topography, and structural fabric of Eastern Ishtar are reviewed, and these observations are compared to the predictions of the existing models for the formation and evolution of Fortuna Tessera. On the basis of the analysis, a number of conclusions are drawn regarding the evolution of Eastern Ishtar Terra. These include the recognition of primary morphological and topographical patterns which allow Eastern Ishtar Terra to be divided into four major physiographic regions named Maxwell Montes, Eastern Fortuna Tessera, Central Fortuna Tessera, and Northern Fortuna Tessera. A model is suggested that accounts for the morphology and high topography of Eastern Ishtar Terra.

Vorder Bruegge, R. W.↗
NASA NTRS1992

Evolution of luminous IRAS sources - Radio imaging

Observations of the compact radio morphology of 111 luminous IRAS-selected active galaxies covering a wide range of IR and optical properties are presented and discussed. Of these sources, 72 are observed for the first time with the VLA A configuration. The circumnuclear radio sources are generally small and weak, with 15 nondetections to a limit of about 0.4 mJy. Comparison with the IR and optical properties of the objects indicates that the radio sources turn on within 10 exp 8 yr of the tidal encounter that is presumed to generate the IR activity. However, the radio sources do not all appear at the same time. The radio observations are consistent with the evolution scenario for luminous IRAS galaxies suggested by Hutchings and Neff (1991).

Neff, S. G.↗
DOE OSTI2021

SR19021 Tritium Aging of Regenerated LANA.75 (Final Project Report)

The Savannah River Tritium Enterprise (SRTE) has used the metal hydride LaNi 4.25 Al 0.75 (LANA.75) in the Tritium Facilities for over two decades. LANA.75 beds store significant quantities of tritium but have a limited service life due to the radiolytic decay of tritium to He-3 within the metal matrix. It has been shown that heating tritium-aged LANA.75 under vacuum can reverse tritium aging effects, eliminating the heel of trapped hydrogen, and restoring the reversible capacity. Additional investigation is needed to ensure there are no unexpected changes to the hydride before this restoration technique is employed in full scale beds in the Tritium Facilities. This project was to be comprised of three distinct scopes: obtain tritium aging data on the sample regenerated in 2018, regenerate a tritium-aged sample at 600 °C, and perform thermal stability testing on a non-tritiated sample. Isotherms were collected on the previously regenerated sample after approximately two years of tritium aging. Isotherms were collected at 80, 100, and 120 °C. As expected, there was a decrease in the plateau pressure, an increase in plateau slope, and a portion of the “heel” of tritium trapped in the metal had been reestablished. Unexpectedly, it appeared that the plateau had shortened at the higher tritium to metal ratios as well. This is typically seen in older samples. The second scope, to regenerate a second tritium-aged LANA.75 sample, was not completed. A Task Technical and Quality Assurance Plan was written and approved, a high temperature test cell was fabricated, several pre-job briefs were held, and the hydride sample was passivated with air. Despite these successes, the hydride sample was not recovered from the legacy test cell. The third scope was to perform thermal stability testing on a “cold” LANA.75 sample. A non-tritiated sample of LANA.75 was held at 750 °C under vacuum for 200 hours to simulate exposure to multiple regeneration evolutions. Hydride isotherm performance, chemical composition, crystallinity, particle size, and morphology are compared between the pre- and post-regeneration samples. No significant changes were observed in composition, crystallinity, or particle size. Comparison of before and after isotherms showed that performance improved rather than deteriorated during the evolution. Scanning Electron Microscopy (SEM) analysis showed small growths on the particle surface after exposure to regeneration conditions. Additional testing will be required to determine the cause of these growths.

07 ISOTOPE AND RADIATION SOURCES↗
NASA NTRS1990

Long-wave interactions in morphological and convective instabilities

A binary liquid that undergoes directional solidification is susceptible to morphological and solutal-convective instabilities that cause the solid/liquid interface to change from a planar to a cellular state. This paper gives derivations for those long-wave evolution equations that describe the weak couplings between convection and interface morphology and gives some analytical results obtainable from these.

Riley, D. S.↗
DOE OSTI2023

Phase-field modeling of alloy oxidation at high temperatures

Oxide growth is a complex process involving transport of reactive species, heterogeneous reactions, and microstructure evolution. Predicting oxidation kinetics and especially the oxide morphological change has been a long-standing challenge. Here we develop a phase-field model for predicting the oxide growth kinetics of a multicomponent alloy during high temperature oxidation, focusing on internal oxidation (non-protective) and its transition to external oxidation (protective). In this work, the predicted kinetics and oxide morphology are analyzed and compared to the classical Wagner’s theory and an existing analytical model by Zhao and Gleeson. Some assumptions used in the analytical models and the limitation are discussed. In addition, it is demonstrated that the morphology and distribution of the initial oxide nuclei play an important role in the later stage oxide connectivity and thus the transition to external oxidation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The application of synchrotron micro-computed tomography to characterize the three-dimensional microstructure in irradiated nuclear fuel

This research demonstrated the first time that synchrotron X-ray micro-computed tomography (μ-CT) was utilized to analyze the three-dimensional (3-D) morphology of the microstructure of irradiated nuclear fuel. Both absorption contrast and propagation-based phase contrast enhanced μ-CT techniques were evaluated. Porosity and phase region volumes were determined in neutron irradiated uranium 10 wt.% zirconium (U-10Zr) using propagation-based phase contrast enhanced μ-CT. Volumes were determined by image processing software and algorithms, with the porosity volume subsequently compared to the ASTM E562 method. The 3-D porosity of a small region (~ 8 x 10 5 µm 3 ) located in the intermediate fuel redistribution zone that was removed via a focused ion beam was determined to be 7.2% via image processing. A detailed 3-D analysis of the porosity with respect to volume and morphology was provided. Five growth stages of pore evolution were observed including: nucleation, growth, coalescence, interconnected porosity, and extended/interconnected porosity. Four distinct phase regions were identified, including the pores, via both absorption contrast and propagation-based phase contrast enhanced μ-CT. A quantitative comparison of fuel swelling between this localized microscopic U-10Zr fuel region, previously irradiated in the Fast Flux Test Facility, and historic U-10Zr fuels irradiated in the Experimental Breeder Reactor-II (EBR-II) was conducted. It was determined that for similar burnups, the localized swelling in this microscopic fuel region was 7.7%, which was approximately one-half of the value of the macroscopic swelling reported in EBR-II irradiated fuel. With the advent of new specimen preparation tools for irradiated materials, as well as advances in characterization techniques, researchers can now obtain previously inaccessible microstructural insight into irradiated fuels. This possibility naturally lends itself to improved fuel performance models for the nuclear community.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Three-Dimensional Heat Flux and Thermal Analysis of Angled Tungsten Samples on DIII-D

ITER-grade tungsten and dispersoid-strengthened tungsten samples with the top surface angled at ~15° towards the incident plasma flux were exposed to 9 H-mode discharges with edge-localized modes (ELMs) in the lower divertor of DIII-D tokamak using the Divertor Material Evaluation System (DiMES). Surface damage included cracking and flaking of material on the two samples farthest away from the plasma strike point, and significant melting of the two samples closest to the strike point. Heat flux and thermal analysis tools new to DIII-D have been applied to better understand this material response and to help optimize the exposure conditions for future experiments. SMITER field-line tracing simulations based on IRTV data and EFIT equilibria estimate an average inter-ELM perpendicular heat flux, 𝑞⊥,𝑖nter−𝐸LM , on the angled surfaces of 10.1 – 19.6 MW/m² for a majority of the 9 discharges, increasing to 15.6 – 24.5 MW/m² for the single, higher-power shot where samples melted. Fast camera data showed shallow intra-ELM melting and re-solidification, which transitioned to bulk inter-ELM melting with melt motion in the 𝐽⃗ 𝑥 𝐵⃗ direction. About 50% of the protruding volume of the most affected sample was displaced via melt-motion. SIERRA thermal modeling software was able to reproduce an onset time of melting consistent with fast camera data and final sample conditions, within < 200 ms. Maximum surface temperatures of 3122 K and 2787 K are estimated for the samples farthest away from the strike point, while the closest samples achieve melting at 4067 ms and 4750 ms into the ~5000 ms plasma exposure. A +10% increase in both the SMITER 𝑞⊥,𝑖nter−𝐸LM calculations and the estimated ELM heat loads 𝑞⊥, 𝐸LM was required to achieve this result, which is within the uncertainty of the diagnostic data but likely accounts for non-ideal geometry effects plus other physics uncertainties not included in this first iteration of modeling. This work provided valuable estimates of the 3D temperature evolution to help better understand the observed surface morphology and internal recrystallization of samples, which are discussed in detail in a complementary manuscript [1]. Benchmarking efforts with more diagnosed DIII-D experiments are underway to further refine the SMITER and SIERRA models for DiMES. Future use of these tools will enable researchers to precisely target heat flux exposure conditions in DIII-D to test, but not exceed, the thermomechanical limitations of novel plasma-facing materials.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1982

Results from the LIMS experiment for the PMP-1 winter 1978/79

The results of a preliminary analysis of the data on the global distributions of temperature and trace constituents in the middle atmosphere (15-65 km) obtained with the limb IR monitor (LIMS) are presented. The 6-channel limb-scanning radiometer was sensitive to the 15 micron bands of CO2, as well as other wavelengths, and was launched on the Nimbus 7 satellite in 1978. The derived data were partially compared with Soviet rocketsonde data to track an evolution in a warming trend over Siberia. The morphology of the changes were attributed to stratospheric warming. The comparisons with rocketsonde data indicated that the LIMS data were suitable for the determination of planetary wave amplitudes and phases, heat and momentum transport, and Eliassen-Palm fluxes.

Gille, J. C.↗
NASA NTRS1990

Origin and evolution of valleys on Martian volcanoes

Medium (1:2,000,000) and high (1:500,000) resolution Viking images were used to locate, map, and analyze drainage systems of six moderate-sized Martian volcanoes of various ages (including Ceraunius Tholus, Hecates Tholus, Alba Patera, Hadriaca Patera, Apollinaris Patera, and Tyrrhena Patera) in order to determine the origin and the evolution of valley forms on these volcanoes. The morphological characteristics of the drainage forms were compared to those of terrestrial volcanic valleys of known origin. On the basis of studies of valleys on the Hawaiian volcanoes, an evolutionary sequence for valleys on the Martian volcanoes is proposed.

Gulick, Virginia C.↗
NASA NTRS1992

Multispectral observations of the Jovian aurora

The upper atmospheres of the Earth and the outer planets form a screen on which precipitating charged particles, like the electron beam in a television, trace fleeting, but revealing patterns of visible, ultraviolet, infrared, and x ray emissions that offer valuable clues to processes occurring within the planetary magnetospheres. At Earth, years of in situ measurements, as well as ground based observations, have yielded a picture (still fuzzy) where the interaction of the solar wind with the magnetosphere of the Earth provides a complex path for the storage and release of energy during magnetic substorms; the ultimate manifestation of terrestrial auroral processes. More recent global imaging of substorm events from high above the Earth (greater than 3.5 R(sub e)) by Dynamics Explorer have made a unique contribution towards understanding the global and temporal evolution of such auroral events by providing a morphological perspective and by providing the crucial observational link that allows the separation of spatial and temporal variations inherent in the interpretation of in situ data. A similar role was played by the Hubble Space Telescope (HST) during the recent encounter of Ulysses with Jupiter in helping to define a new paradigm in Jovian auroral physics. The old paradigm portrayed Jupiter's magnetosphere as totally dominated by internal processes (i.e. Io related tori, heavy ions, etc.) where energetic heavy ion precipitation in the inner magnetosphere was solely responsible for the observed auroral phenomena. Ulysses and HST portray a more Earth-like paradigm where electron acceleration in the outer magnetosphere near the boundary with the solar wind plays a distinct role in the formation of auroral hot spots, yet energetic heavy ions also enter into the picture (similar to the role of the energetic ions from the terrestrial ring current during magnetic substorms). These heavy ions as a result of excitation during their transit through the atmosphere produce the x ray emissions observed in Roentgensatellit (ROSAT) x ray energy spectra.

Source record↗
NASA NTRS2001

Adaptive-Grid Methods for Phase Field Models of Microstructure Development

Modeling solidification microstructures has become an area of intense study in recent years. The properties of large scale cast products, ranging from automobile engine blocks to aircraft components and other industrial applications, are strongly dependent on the physics that occur at the mesoscopic and microscopic length scales during solidification. The predominant morphology found in solidification microstructures is the dendrite, a tree-like pattern of solid around which solidification proceeds. The microscopic properties of cast products are determined by the length scales of these dendrites, and their associated segregation profiles. For this reason understanding the mechanisms for pattern selection in dendritic growth has attracted a great deal of interest from the experimental and theoretical communities. In particular, a great deal of research has been undertaken to understand such issues as dendrite morphology, shape and growth speed. Experiments on dendrite evolution in pure materials by Glicksman and coworkers on succinonitrile (SCN), and more recently pivalic acid (PVA), as well as other transparent analogs of metals, have provided tests of theories for dendritic growth, and have stimulated considerable theoretical progress. These experiments have clearly demonstrated that in certain parameter ranges the physics of the dendrite tip can be characterized by a steady value for the dendrite tip velocity, radius of curvature and shape. Away from the tip, the time-dependent dendrite exhibits a characteristic sidebranching as it propagates, which is not yet well understood. These experiments are performed by observing individual dendrites growing into an undercooled melt. The experiments are characterized by the dimensionless undercooling. Most experiments are performed at low undercooling.

Dantzig, Jonathan A.↗
NASA NTRS2001

Impact Cratering Calculations

We examined the von Mises and Mohr-Coulomb strength models with and without damage effects and developed a model for dilatancy. The models and results are given in O'Keefe et al. We found that by incorporating damage into the models that we could in a single integrated impact calculation, starting with the bolide in the atmosphere produce final crater profiles having the major features found in the field measurements. These features included a central uplift, an inner ring, circular terracing and faulting. This was accomplished with undamaged surface strengths of approximately 0.1 GPa and at depth strengths of approximately 1.0 GPa. We modeled the damage in geologic materials using a phenomenological approach, which coupled the Johnson-Cook damage model with the CTH code geologic strength model. The objective here was not to determine the distribution of fragment sizes, but rather to determine the effect of brecciated and comminuted material on the crater evolution, fault production, ejecta distribution, and final crater morphology.

Ahrens, Thomas J.↗
NASA NTRS1988

Inducement of heterochronic variation in a species of planktic foraminifera by a Late Eocene impact event

While it is well known that the cosmic impact event at or near the Cretaceous-Tertiary boundary coincides with an interval of mass extinction, a similar impact (or series of impacts) near the Eocene-Oligocene boundary presents a more complex picture, in terms of associated fluctuations in marine biotic diversity. Tektites, microtektites, and mineral grains exhibiting features of shock metamorphism found in Eocene sediments of the western N. Atlantic, Caribbean, and Gulf of Mexico (comprising the North American microtektite strewn field) offer compelling evidence for a catastrophic impact event. Despite the magnitude of this event, however, few extinctions in the planktic marine fauna are known to have occurred coincident with this event. Instead, changes in relative abundance, morphology, and development occurred. Cosmic impacts generally have been interpreted as influencing the course of evolution through the wholesale elimination of significant portions of standing biotic diversity. Indeed, extinction traditionally has been viewed as the negative side of evolution. In some instances, it is suggested such impact events can serve instead to increase, rather than decrease, morphological and ecological diversity, by altering the developmental programs within species at the level of the local population.

Macleod, N.↗
NASA NTRS2020

Experimental Impacts into Strength-Layered Targets: Crater Morphology and Morphometry

Impact cratering is a fundamental physical process that has dominated the evolution and modification of nearly every planetary surface in the Solar System. Impact craters serve as a means to probe the subsurface structure of a planetary body and provide hints about target surface properties. By examining small craters on the lunar maria and comparing these to experimental impacts in the laboratory, Oberbeck and Quaide first suggested that crater morphology can be used to estimate the thickness of a regolith layer on top of a more competent unit. Lunar craters show a morphological progression from a simple bowl shape to flat-floored and concentric craters as crater diameter increases for a given regolith thickness. This quantitative relationship is commonly used to estimate regolith thicknesses on the lunar surface and has also been explored via numerical and experimental studies. Here we report on a series of experimental impact craters formed in targets com-posed of a thin layer of loose sand on top of a stronger substrate at the Experimental Impact Laboratory at NASA Johnson Space Center.

Anderson, J. L. B.↗