SEARCH · Engineering Papers

Results for “moderator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Connecting particle interactions to agglomerate morphology and rheology of boehmite nanocrystal suspensions

Rheology imposes significant challenges on processing of complex suspensions such as nuclear waste slurries at the Hanford and Savannah River sites. Understanding rheology connecting to microstructures and underlying particle interactions in complex slurries is therefore important for both fundamental knowledge and practical applications. Here, we use suspensions of aluminum oxyhydroxide minerals in the form of boehmite as an analog of the radioactive waste slurry to gain physical insights on the correlation between particle interactions, microstructures, and slurry rheology. Specifically, we use a combination of Couette rheometry and small-angle scattering techniques (independently and simultaneously) to understand how the slurry microstructure changes under flow and how these structural changes manifest themselves in the bulk rheology of the suspensions. Our experiments show that the boehmite slurries are thixotropic, with the rheology and structure of the suspensions changing with increasing exposure to flow. In the slurries, particle aggregates begin as loose, system-spanning clusters, but exposure to moderate shear rates causes the aggregates to irreversibly consolidate into denser clusters of finite size. The microstructural changes directly influence the rheological properties of the slurries such as viscosity and viscoelasticity. More importantly, our study shows that solution pH affects the amount of structural rearrangement and the kinetics of the rearrangement process, with an increase in pH leading to faster and more dramatic changes in the bulk rheology. Such dynamic microstructural changes and resultant rheology are understood via correlations between particle interactions and strength of particle network, coupled with surface chemistry and anisotropic nature of particle interactions. Nearly identical structural changes are also observed in Poiseuille flow geometries, implying that the observed changes are relevant in the pipe flow conditions present during waste processing.

Weston, Javen S.↗

DOE OSTI2025

UO2 microstructural evolutions induced by Ni, Mo, and W dopants for intentional forensics

The concept of tagging nuclear fuel with a chemical barcode to enable forensics analysis across the nuclear fuel cycle is an area of active investigation, particularly to ensure fabrication viability without disrupting current fuel performance. This study explored the feasibility of using Ni, Mo, and W isotopic double-spikes as dopants in UO2 fuel from the perspective of fuel fabrication. Doped UO2 pellets were produced using conventional fuel fabrication processes, including powder mixing, sieving, pressing, and sintering in a reductive atmosphere. Two composition levels, 100 and 1000 ppm, were evaluated for each dopant element with isotopic double-spike configurations. For the Ni system, additional dopant concentrations of 250 and 500 ppm were produced with nonperturbed isotopic ratios. The results demonstrated that successful incorporation of Ni, Mo, and W double-spikes into UO2 pellets occurred with minimal shift in final density or dopant loss during pellet fabrication. Isotopic analysis confirmed the presence of the double-spike signature even when diluted with natural isotopic material in ratio of 1:5 in the fabrication process. Microstructural examinations revealed different impacts on grain size compared with undoped UO2. This study showed that Ni incorporation up to ∼500 ppm promoted moderate grain growth, whereas the Mo and W systems caused grain size reduction at all concentrations. Changes in the UO2 lattice parameter as a function of composition were detected exclusively for Ni up to 500 ppm, indicating that the Ni solid solution was the main factor for the observed grain growth. Insoluble (Mo and W) or supersaturated (Ni > 500 ppm) conditions produced grain size reduction. The Ni-doped pellets in the solution range resulted in a final microstructure within fuel specifications, demonstrating its potential benefits of employing complex dopant systems for potential nuclear forensic applications.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Rational designs to enable 10-min fast charging and long cycle life in lithium-ion batteries

A daunting challenge in the design of lithium ion batteries (LiBs) is enabling 10-min extreme fast charging (XFC) while achieving appreciable charge acceptance and cycle life. This desirable outcome requires both a comprehensive understanding of LiB operation and aging behavior at different length scales and careful optimization. Lithium plating has been a critical bottleneck because, at XFC rates, it consumes cyclable lithium causing distinct aging and safety concerns even in moderate-loading LiBs. Here, we propose combining multiple solutions, including materials-to-electrode design-to-charging protocols, that are intended to overcome limitations in lithium-ion transport in the electrolyte phase, thus enabling 10-min XFC in LiBs. Some implemented strategies include cathode chemistry, optimized carbon binder domain in the cathode, dual layer anode design, improved separator and advanced electrolyte. Further, innovative charging protocols in moderately loading (~3 mAh/cm 2 anode/2.7 mAh/cm 2 cathode) single-layer pouch cells are proposed, together with demonstrated 10-min XFC with higher charge acceptance between 87.3 and 92.1% (or 2–2.1 mAh/cm 2 ) for 600 cycles without lithium plating. This methodical study with well-defined cells shows promise in combining multiple solution strategies to enable 10-min XFC, charting a pathway to achieve XFC in higher-loading energy-optimized LiBs.

25 ENERGY STORAGE↗

DOE OSTI2025

High tensile alloy of copper to mitigate current collector deformation in silicon electrodes for lithium-ion batteries

The volumetric changes of silicon electrodes, along with the strong adhesive properties of certain binders, can lead to plastic deformation of the current collector and create damage in the electrode coating. Here, in this study, we report a detailed study of silicon coatings on a high-tensile alloy (HTA) foil of copper with strength over twice that of conventional copper foils. The HTA current collectors with high mechanical strength can mitigate plastic deformation upon continuous cycling. At moderate areal capacities (2.5–3 mAh cm −2 ), conventional copper foils show significant wrinkling after only a few electrochemical cycles, whereas the HTA foils remain intact. We demonstrate viability of the HTA foils in large format xx6395 pouch cells, in which the HTA current collectors remain intact even at an areal capacity of 4.5 mAh cm −2 ; in contrast, wrinkles form in conventional copper current collectors increasing the likelihood of lithium plating. Computational studies show that stresses generated during cycling of silicon electrodes are very high in the current collector and at the current collector-coating interface, explaining the wrinkling of conventional Cu foils. Our studies highlight importance of current collector to solve the electrochemical and chemo-mechanical performance challenges associated with high-loading silicon electrodes.

Chemo-mechanical degradation↗

DOE OSTI2025

Bundling measures for food systems transformation: a global, multimodel assessment

Background Current food systems leave one in ten individuals at risk of hunger while driving unsustainable environmental impacts. Inaction risks further exacerbating negative impacts on both human and planetary health. These challenges emerge from complex system interactions, requiring approaches that engage with this complexity and consider how transformation measures interact across food systems. We aimed to quantify the magnitude and uncertainty of the impacts of key food systems transformation measures both individually and in a bundle using an ensemble of global economic models. Methods In this global multimodel assessment, we applied an ensemble of ten state-of-the-art global economic models to evaluate the potential of four key measures in transforming food systems: increasing agricultural productivity, halving food loss and waste, shifting towards healthier diets, and economy-wide climate mitigation policies aligned with limiting warming to 1·5°C. The scenarios used a middle-of-the-road shared socioeconomic pathway for population and gross domestic product growth, climate impact data from Jägermeyr and colleagues, Thornton and colleagues, and Nelson and colleagues, and dietary targets based on the EAT–Lancet healthy reference diet, with model simulations conducted from 2020 to 2050. We then assessed the effect of these measures in isolation and in combination in a bundled scenario. To further understand the interactions between these measures, we conducted a decomposition analysis that distinguishes between the individual effects of a measure (effect when implemented alone), total effects (its contribution within the bundle), and interaction effects (the difference between total and individual effects). This approach aimed to show complementarities and trade-offs that emerge when multiple measures are implemented simultaneously. Findings Our analysis showed that individual measures in isolation are insufficient to achieve high-level environmental objectives and might generate unintended consequences. In contrast, bundling measures produces co-benefits: avoiding 50% of projected agricultural greenhouse gas emissions by 2050 and almost 20% of anticipated land conversion, while moderating food price increases associated with ambitious climate change mitigation policies. Our decomposition analysis further shows that measures can have varying effects across different dimensions. Although dietary shifts and climate mitigation policies are the largest drivers of environmental benefits (each contributing to a median decline of >10 percentage points in non-CO 2 emissions and 5 percentage points in agricultural land use globally), productivity improvements and reducing food loss and waste play essential roles in moderating price increases (each contributing to a median decline of >5 percentage points in average prices). Interpretation This study highlights the importance of implementing coordinated approaches to food system transformation and climate change mitigation rather than relying on isolated interventions. Comprehensive transformation requires understanding how supply-side and demand-side changes can interact with climate mitigation policies, enabling policy makers to design intervention packages that maximise benefits while minimising trade-offs across environmental, economic, and social dimensions.

Sundiang, Marina [Cornell Univ., Ithaca, NY (Unite↗

DOE OSTI2020

Cooling and dietary crude protein affected milk production on heat-stressed dairy cows

Environmental factors, such as temperature and humidity, exert dramatic effects on the production, health, and well-being of lactating dairy cows. Heat-stressed cows undergo a series of homeorhetic adaptations that alters cellular homeostasis and nutrient utilization. As such, the objective of this study was to determine the effects of cooling and dietary crude protein (CP) content on fermentability of rumen inoculum, milk production, and health of heat-stressed cows. It was hypothesized that cooled but not heat-stressed cows would support productivity in response to an increase in dietary CP content. Thirty-six multiparous Holstein cows were randomly assigned to 1 of 4 treatments in a 2 × 2 factorial arrangement (9 cows/treatment). Treatments consisted of cooling (CO) or moderate long-term heat stress (HS) and diets containing low CP content (LCP; 12.5% CP) or moderate CP content (MCP; 16.1% CP) of dry matter. The CO treatment provided heat abatement with sprinklers and fans that came on at > 20.0°C, whereas the HS treatment did not provide sprinklers and fans. Cows were housed in pens in a freestall barn, and treatments were imposed for 21 d during July and August. Compared with the HS treatment, CO decreased afternoon rectal and vaginal temperatures (0.60 and 0.70°C) and afternoon respiration rate (27.6 breaths/min). Treatment interactions showed that compared with the LCP treatment, MCP increased milk fat yield (23%) in CO but not in HS cows. Compared with the LCP treatment, MCP decreased milk protein percent (0.14 units) in CO but increased milk protein percent (0.09 units) in HS cows. Rumen inoculum collected on d 21 showed a ~3-fold increase in total gas production in vitro in CO compared with the HS treatment. Relative to the LCP treatment, MCP increased plasma glucose and insulin and decreased total free fatty acids concentrations. In summary, under the conditions of this study CO but not HS cows responded to a CP stimulus by increasing productivity.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

Multiscale characterization and comparison of historical and modern nuclear graphite grades

Beginning with Chicago Pile I, graphite has been used as a moderator material in nuclear power stations and is considered a potential material for use in future Generation IV advanced reactors. The microstructure of graphite is responsible for much of its mechanical and thermo-physical properties, and how it responds to irradiation. To understand graphite microstructure, it is necessary to understand its porosity at the macro- and micro-scales; and to understand its porosity, it is necessary to characterize the morphological connectivity of the void content and the two main phases of graphite: filler and binder. Here, using several microscopy and analytical techniques, a detailed examination of the heterogeneity, microstructure and pore structure of different graphite grades and their binder and filler phases is presented. Significant differences were found between coarser and finer nuclear grades. Coarse grades have a more diverse range of filler particles, pores and thermal cracks. Finer grades have a more well-defined pore size distribution, fewer variations of filler particles sizes and do not contain as many large thermal cracks. Fine grades tend to have a well-connected network of pores whereas coarser grades contain a larger content of closed porosity. The framework developed within this work can be applied and used to assess the various graphite grades that would down-select materials for specific use in graphite moderated reactor designs.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2020

Comparative Studies of Optoelectrical Properties of Prominent PV Materials: Halide Perovskite, CdTe, and GaAs

We compare three representative high performance PV materials: halide perovskite MAPbI3, CdTe, and GaAs, in terms of photoluminescence (PL) efficiency, PL lineshape, carrier diffusion, and surface recombination and passivation, over multiple orders of photo-excitation density or carrier density appropriate for different applications. An analytic model is used to describe the excitation density dependence of PL intensity and extract the internal PL efficiency and multiple pertinent recombination parameters. A PL imaging technique is used to obtain carrier diffusion length without using a PL quencher, thus, free of unintended influence beyond pure diffusion. Our results show that perovskite samples tend to exhibit lower Shockley-Read-Hall (SRH) recombination rate in both bulk and surface, thus higher PL efficiency than the inorganic counterparts, particularly under low excitation density, even with no or preliminary surface passivation. PL lineshape and diffusion analysis indicate that there is considerable structural disordering in the perovskite materials, and thus photo-generated carriers are not in global thermal equilibrium, which in turn suppresses the nonradiative recombination. This study suggests that relatively low point-defect density, less detrimental surface recombination, and moderate structural disordering contribute to the high PV efficiency in the perovskite. This comparative photovoltaics study provides more insights into the fundamental material science and the search for optimal device designs by learning from different technologies.

14 SOLAR ENERGY↗

DOE OSTI2022

A whole-core steady-state thermal-hydraulic model for annular fuel type fluoride-salt-cooled reactors

A whole-core, steady-state thermal-hydraulic model is developed for the fluoride-salt-cooled small modular advanced high-temperature reactor (SmAHTR) that employs an annular fuel configuration. This pre-conceptual reactor design by Oak Ridge National Laboratory (ORNL) has the annular fuel and moderator pins arranged in a hexagonal layout. The FLiBe coolant flows from the bottom to the top of the core, parallel to the hexagonal bundle. The fuel and moderator pins in the core are discretized into finite volumes and the 3-D heat conduction equation is solved to obtain the temperature profile. Inter-fuel assembly conduction is also addressed. For this fuel assembly configuration, the coolant flows through two distinct regions – the hexagonal pin bundle and the annulus between the fuel pin and the tie rod. The fluid flow through the hexagonal bundles is modeled using the subchannel approach, in which the coolant region is discretized into corner, edge and interior subchannels and the resulting conservation equations are systematically solved. The 1-D mass, momentum and energy equations are solved for the annulus channels between the fuel pin and the tie rod. Pertinent closure models from the literature are employed to close the system of equations. We also performed a preliminary code-to-code comparison between the present model and a CFD model.. The resulting thermal-hydraulic model can provide temperature, flow rate and pressure drop profiles for the different solid and fluid regions throughout the entire core. Whole-core thermal-hydraulic results for a representative power profile are presented and discussed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2025

Temperature sensitivity of the equilibrium neutronics and accident analysis of the HTR-10

Pebble-Bed High-Temperature Gas-cooled Reactors (PB-HTGR) are moderated by the graphite in the fuel pebbles and the graphite reflector surrounding the pebble-bed. Because graphite is by far the most abundant material in PB-HTGRs and the primary moderator, accurate modeling of the graphite material, including density, impurities, and temperatures, is crucial for accurate computational modeling and simulation of these reactors. While main characteristics of the graphite components are often known, the local temperature is less well known and often averaged over all components. Here, this work studies the impact of considering accurate temperature profiles in the graphite material on the generation of a small PB-HTGR model at the state of equilibrium operation and on short-term accident progression. The fuel compositions for the PB-HTGR were determined using a jump-in equilibrium modeling method, the Axial Radial Zone Equilibrium Modeling (AR-ZEM) method. In contrast to previous work, the AR-ZEM method was used considering thermal-hydraulic feedback from the MELCOR code to determine temperatures of the fuel pebbles and the surrounding graphite reflector. The consideration of an axial and radial temperature profile in the core and reflector, as opposed to uniform material temperatures, had an impact of almost 1,300 pcm on the equilibrium core eigenvalue and caused significant differences in the discharged plutonium fuel inventory with up to 4.9% and 11.0% for Pu-239 and Pu-242, respectively. To assess the impact on short-term accident progression, two Anticipated Transient Without SCRAM (ATWS) events, a Pressurized Loss of Forced Coolant (PLOFC) and a Control Rod Withdrawal (CRW) with loss of flow, were simulated with MELCOR. The use of temperature profiles in the equilibrium core models did not reveal a significant impact on the temperature, power, or reactivity responses during the transients. In conclusion, a need for consideration of accurate temperature profiles, in particular for the graphite reflector, was found for the generation of equilibrium PB-HTGRs core models using jump-in methods, but detailed temperature profiles may not be necessary when performing conservative transient analysis.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2021

Wave energy resources assessment for the multi-modal sea state of Hawaii

This paper describes development and validation of a 32-year wave hindcast for Hawaii as part of the wave energy resources assessment for the Exclusive Economic Zones of the US and affiliated territories. The nested model system comprises structured WAVEWATCH III models for the entire globe and the Central North Pacific as well as an unstructured SWAN model around the Hawaiian Islands with wind forcing from the Global Forecast System Reanalysis and its regional downscaling. The development effort follows the standards introduced by the International Electrotechnical Commission (IEC). The hindcast dataset was firstly validated with buoy measurements in terms of the six IEC wave energy resources parameters including the omnidirectional wave power ????, significant wave height ????????0, energy period ????????, spectral width ????0, direction of maximum directionally resolved wave power ?????????? ????????, and directionality coefficient ????. The comparison shows good overall agreement but with greater uncertainties for the spectral parameters ????0, ???????????????????? , and ???? formulated for narrow band spectra. The multimodal sea state in Hawaii always includes a mix of short-period wind seas, long-period swells from the North and South Pacific as well as waves with moderate periods from multiple sources. We partition the hindcast spectra based on the respective period ranges and directions and validate the partitioned spectral energy and parameters with measured values for implementation in wave energy resources assessment. The partitioned wave parameters from the hindcast allow separate seasonal descriptions of wind seas, north and south swells, and moderate-period waves for in-depth understanding of the wave climate and resources in Hawaii.

Li, Ning↗

DOE OSTI2022

Hydrated Anions: From Clusters to Bulk Solution with Quasi-Chemical Theory

The interactions of hydrated ions with molecular and macromolecular solution and interface partners are strong on a chemical energy scale. Here we recount the foremost ab initio theory for the evaluation of the hydration free energies of ions, namely, quasi-chemical theory (QCT). We focus on anions, particularly halides but also the hydroxide anion, because they have been outstanding challenges for all theories. For example, this work supports understanding the high selectivity for F – over Cl – in fluoride-selective ion channels despite the identical charge and the size similarity of these ions. QCT is built by the identification of inner-shell clusters, separate treatment of those clusters, and then the integration of those results into the broader-scale solution environment. Recent work has focused on a close comparison with mass-spectrometric measurements of ion-hydration equilibria. We delineate how ab initio molecular dynamics (AIMD) calculations on ion-hydration clusters, elementary statistical thermodynamics, and electronic structure calculations on cluster structures sampled from the AIMD calculations obtain just the free energies extracted from the cluster experiments. That theory–experiment comparison has not been attempted before the work discussed here, but the agreement is excellent with moderate computational effort. This agreement reinforces both theory and experiment and provides a numerically accurate inner-shell contribution to QCT. The inner-shell complexes involving heavier halides display strikingly asymmetric hydration clusters. Asymmetric hydration structures can be problematic for the evaluation of the QCT outer-shell contribution with the polarizable continuum model (PCM). Nevertheless, QCT provides a favorable setting for the exploitation of PCM when the inner-shell material shields the ion from the outer solution environment. For the more asymmetrically hydrated, and thus less effectively shielded, heavier halide ions clustered with waters, the PCM is less satisfactory. We therefore investigate an inverse procedure in which the inner-shell structures are sampled from readily available AIMD calculations on the bulk solutions. This inverse procedure is a remarkable improvement; our final results are in close agreement with a standard tabulation of hydration free energies, and the final composite results are independent of the coordination number on the chemical energy scale of relevance, as they should be. Finally, a comparison of anion hydration structure in clusters and bulk solutions from AIMD simulations emphasize some differences: the asymmetries of bulk solution inner-shell structures are moderated compared with clusters but are still present, and inner hydration shells fill to slightly higher average coordination numbers in bulk solution than in clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Gas Production from Hot Water Circulation through Hydraulic Fractures in Methane Hydrate-Bearing Sediments: THC-Coupled Simulation of Production Mechanisms

Methane hydrates, widely found in permafrost and deep marine sediments, have great potential as a future energy 6 source. Conventional production schemes perform poorly for challenging hydrate reservoirs with low permeability. We propose an 7 efficient production scheme by combining hydraulic fracturing from horizontal wells and hot water circulation through fractures. A 8 fully coupled thermo-hydro-chemical (THC) model is developed to simulate the key physical processes during gas production from 9 a hydrate reservoir representative of typical geological settings in Shenhu, South China Sea. We found that the gas production 10 process has two distinct stages divided by thermal breakthrough: a relatively short prebreakthrough stage and a postbreakthrough 11 stage yielding stable gas production. Heat advection along and near the hydraulic fracture dominates the prebreakthrough stage, 12 whereas conduction-driven thermal recovery in the volume around fractures dominates the postbreakthrough stage. We identified 13 that the steady-state injection temperature has a strong effect on the performance of the proposed scheme while the fluid mass 14 circulation rate has a moderate impact beyond a threshold. The proposed scheme proves to be efficient and robust over a range of 15 reservoir conditions with respect to initial hydrate saturation and intrinsic permeability, including their spatial heterogeneities, 16 thereby offering a promising solution for challenging reservoir conditions.

gas hydrate, fracture flow, gas production, numeri↗

DOE OSTI2020

CO 2 –Brine Contact Angle Measurements on Navajo, Nugget, Bentheimer, Bandera Brown, Berea, and Mt. Simon Sandstones

In this study, contact angles were measured for CO 2 bubbles on six different sandstones (Navajo, Nugget, Bentheimer, Bandera Brown, Berea, and Mt. Simon) that could potentially represent properties of CO 2 storage depositional environments. The impacts of pressure and temperature were studied by focusing on the CO 2 phase behavior in three different scenarios: gaseous, liquid, and supercritical conditions. Despite controlling the sample preparation and cleanliness, CO 2 -brine equilibration conditions, and pressure and temperature, there were inconsistencies in contact angle trends that could largely be attributed to natural sample heterogeneity resulting from localized variations in topography, surface roughness, and mineral composition across the surface. Despite these variations, the analysis of 298 measurements from this study showed that 81% of the contact angles were below 40° representing strongly water-wet to (moderately) water-wet behaviors. Also, 17.3% of the measurements were between 40° and 60° (weakly water-wet) and primarily belonged to small CO 2 bubbles (< 500 μm) that were heavily impacted by localized surface heterogeneity in natural sandstone samples. Additionally, only 1.7% of the measurements had angles greater than 60° and could be classified as CO 2 -wet behavior, but these measurements occurred on extremely small bubbles (100-200 μm) that were very dependent on localized surface heterogeneity. While some of the detailed physics of the CO 2 -brine-sandstone interface is still poorly understood, from an application standpoint, the sandstones of this study were best characterized as strongly water-wet to (moderately) water-wet.

03 NATURAL GAS↗

DOE OSTI2023

Characterizing Surface Ice-Philicity Using Molecular Simulations and Enhanced Sampling

The formation of ice, which plays an important role in diverse contexts ranging from cryopreservation to atmospheric science, is often mediated by solid surfaces. Although surfaces that interact favorably with ice (relative to liquid water) can facilitate ice formation by lowering nucleation barriers, the molecular characteristics that confer ice-philicity to a surface are complex and incompletely understood. To address this challenge, here we introduce a robust and computationally efficient method for characterizing surface ice-philicity that combines molecular simulations and enhanced sampling techniques to quantify the free energetic cost of increasing surface–ice contact at the expense of surface–water contact. Using this method to characterize the ice-philicity of a family of model surfaces that are lattice matched with ice but vary in their polarity, we find that the nonpolar surfaces are moderately ice-phobic, whereas the polar surfaces are highly ice-philic. In contrast, for surfaces that display no complementarity to the ice lattice, we find that ice-philicity is independent of surface polarity and that both nonpolar and polar surfaces are moderately ice-phobic. Furthermore, our work thus provides a prescription for quantitatively characterizing surface ice-philicity and sheds light on how ice-philicity is influenced by lattice matching and polarity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

The Surface Chemistry of Methanol on Cu 3 Pd(111): Effects of Metal Alloying and Reaction with Hydrogen

Synchrotron-based ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) was used to study the adsorption and surface chemistry of methanol on a Cu 3 Pd(111) model surface. The composition and morphological properties of the pristine Cu 3 Pd(111) substrate were analyzed using a combination of low-energy electron diffraction (LEED), scanning tunneling microscopy (STM), and low-energy ion scattering (LEIS). The results of ion scattering showed segregation of Pd toward the surface, with a Pd/Cu ratio close to 0.5, a larger value than the ratio of 0.33 expected for a Cu 3 Pd bimetallic structure. The surface of the alloy exhibited a good LEED pattern with three-fold long-range periodicities. In STM, clusters of palladium with hexagonal arrays and Pd- Pd distances of 2.7-2.8 Å were detected. Bonding to copper perturbed the electronic properties of the atoms in the Pd clusters, shifting their 4d states toward higher binding energy with respect to the Fermi level. Further, the valence band spectrum of Cu 3 Pd(111) exhibited a line shape that was very different from those displayed by Cu(111) or Pd(111). At low pressures, the adsorption of methanol on Cu 3 Pd(111) at 300 K mainly produced CH 3 O, CO and CH x species. AP-XPS showed that most Pd atoms in the surface of the Cu 3 Pd(111) alloy interacted with the decomposition products of methanol. No significant changes were observed in the core levels of copper upon the adsorption and dissociation of methanol, suggesting that the molecule mainly interacted with Pd sites of the alloy. Reaction with hydrogen led to fast removal of CH x , C and PdC x species from Cu 3 Pd(111) at moderate (< 450 K) temperatures and prevented a CH x → C transformation. If the stability of adsorbed CH 3 O is used as a descriptor for the hydrogenation of CO 2 to methanol, Cu 3 Pd should be a much better catalyst than monometallic palladium. This may be a consequence of electronic and ensemble effects in the alloy that moderate the reactivity of Pd sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Calcium-Doped High-Voltage Spinel Cathode for Long Cycle Life Lithium-Ion Batteries

With the promises of low cost, high operating voltage, and excellent rate capability, the high-voltage spinel material with the formula of LiNi 0.5 Mn 1.5 O 4 (LNMO) has been considered as one of the most promising cathode materials for nextgeneration lithium-ion batteries (LIBs). However, the adoption of LNMO into practical LIBs is greatly hindered due to its rapid capacity decay associated with its bulk structural instability and interfacial side reactions. To address these issues, we proposed to use the cost-effective calcium (Ca) element as a dopant to stabilize the oxygen framework and surface of the LNMO crystal. The experimental results showed that, with moderate Ca doping, the obtained cathode (Ca 0.05 LNMO) retained a specific capacity of ∼121 mAh/g (∼94.4% capacity retention) after 500 cycles at 0.5 C, compared to ∼73% for the baseline bare sample. Furthermore, the Ca 0.05 LNMO cathode retained ∼84% of its initial capacity, vs the baseline with ∼69%, after 150 cycles at the high temperature of 55 °C. The excellent battery performance of the moderately Ca-doped LNMO cathode is ascribed to its structural and kinetic advantages.

25 ENERGY STORAGE↗

DOE OSTI2020

Cobalt-Group 13 Complexes Catalyze CO 2 Hydrogenation via a Co(-I)/Co(I) Redox Cycle

The Co(-I) dihydrogen complexes, [(η 2 -H 2 )CoML]-, where ML is the group 13 metalloligand, N(o-(NCH 2 PiPr 2 )C 6 H 4 ) 3 M, and M is Al, Ga, or In, were previously reported ( J. Am. Chem. Soc. 2017, 139, 6570-6573). In this work, the related Co(-I) end-on dinitrogen adducts, [(N 2 )CoML]-, were isolated and investigated as precatalysts for CO 2 hydrogenation. The Co–Ga catalyst was highly active, achieving 19,200 formate turnovers with an initial turnover frequency of 27,000 h –1 under 34 atm of 1:1 CO 2 /H 2 and using Verkade’s proazaphosphatrane as a base at ambient temperature. The Co–Al catalyst was moderately active, while the Co–In complex was inactive. Hence, tuning the group 13 ion greatly influences the catalytic activity at the Co site. To elucidate the role of the group 13 support, experimental and theoretical mechanistic studies of the Co–Ga and Co–Al catalysts were conducted. The Co(-I) H 2 species are potent hydride donors with estimated thermodynamic hydricities (ΔG° H– ) of 32.0(1) and 37.4(1) kcal/mol in CH 3 CN for M = Al and Ga, respectively. By acting as masked Co(I) dihydrides, the Co(-I) H 2 species operate via an unusual Co(-I)/Co(I) redox cycle. After hydride transfer to CO 2 , the resulting intermediate is the Co(I) hydride complex, HCoML, which was independently synthesized and structurally characterized for M = Al and Ga. The Gibbs free energy for H 2 binding, ΔG° bind (1 atm), to generate (η 2 -H 2 )HCoML was slightly more favorable for HCoGaL (-4.2(1) kcal/mol) than for HCoAlL (-2.7(1) kcal/mol). In the subsequent step, the deprotonation reaction to regenerate the initial catalyst was much more favorable for (η 2 -H 2 )HCoGaL (pK a of 31.4, CH 3 CN) than for (η 2 -H 2 )HCoAlL (pK a of 34.3). Finally, the straightforward substitution of Al with Ga perturbs the energy profile of the catalytic reaction (|ΔΔG° H– | = 5.4 kcal/mol, |ΔΔG° bind | = 1.5 kcal/mol, and |ΔΔG° K a | = 4.0 kcal/mol) and thus provides a thermodynamic rationale for the higher catalytic efficiency of Co–Ga over Co–Al.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗