SEARCH · Engineering Papers

Results for “model types”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

All sources NASA NTRS DOE OSTI

NASA NTRS2022

Diurnal Waves Forced By Horizontal Convergence of Near-Surface Winds on Mars

Boundary-layer winds near steeply sloped topography excite a distinct type of atmospheric wave. Basic properties of the waves were determined through analysis of 7 Mars years of temperature profiles from the Mars Climate Sounder on Mars Reconnaissance Orbiter. A more complete understanding of the waves was derived from a simulation with the NASA Ames Mars General Circulation Model. This type of wave appears in the tropics in the vicinity of conspicuous surface features, such as large volcanoes and the rim of Isidis Planitia. The amplitude is typically 5–10 K, the vertical wavelength is about 40 km, the zonal wavelength is about 1400 km, and the zonal phase speed relative to the surface is about 25 m s−1. The wave forcing comes from horizontal convergence of the near-surface winds, which generates a daily surge in the vertical winds. These convergence zones were not previously recognized as an important source of atmospheric waves on Mars. Strong forcing occurs only within a limited range of local time, producing wave packets (diurnal pulses) rather than steady oscillations. Waves are present throughout the year and their properties vary with season. Near the solstices, the wave amplitude is largest in the tropics of the summer hemisphere, where the convergence zones are stronger than in the winter hemisphere. The diurnal-mean zonal winds, which vary with latitude and season, control the direction of propagation of the predominant waves through filtering by critical levels.

Mars↗

NASA NTRS1988

Microplate and shear zone models for oceanic spreading center reorganizations

The kinematics of rift propagation and the resulting goemetries of various tectonic elements for two plates is reviewed with no overlap zone. The formation and evolution of overlap regions using schematic models is discussed. The models are scaled in space and time to approximate the Easter plate, but are simplified to emphasize key elements. The tectonic evolution of overlap regions which act as rigid microplates and shear zones is discussed, and the use of relative motion and structural data to discriminate between the two types of models is investigated. The effect of propagation rate and rise time on the size, shape, and deformation of the overlap region is demonstrated.

Engeln, Joseph F.↗

NASA NTRSDate not supplied

New York Ecological Forecasting: Utilizing NASA Earth Observations to Map Ash Distribution and Inform Emerald Ash Borer Control

Since their first sightings in the U.S. in 2002, emerald ash borer beetles (Agrilus planipennis; EAB) have killed millions of native ash (Fraxinus spp.) trees across 35 states. Infected ash stands frequently exhibit complete mortality, with the predicted result being the functional extinction of native ash in U.S. forests. In August of 2020, EAB was discovered in the 6.1-million-acre Adirondack Park. The team’s partners at the Adirondack Park Invasive Plant Program (APIPP) desired ash tree distribution and EAB susceptibility information to help improve EAB bio-control efficiency and apply the methodology to future invasive programs. To assist, the team mapped ash tree distribution using NASA Earth observations from Landsat 7 Enhanced Thematic Mapper Plus (ETM+) and Shuttle Radar Topography Mission (SRTM), along with hyperspectral imagery from the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS). Field data from the Monitoring and Managing Ash (MaMA) project, iMapInvasives and iNaturalist databases, and the New York State Department of Environmental Conservation (NYSDEC) provided ground truthing for mapping and modeling. Results indicate that for ash detection, the team’s Spectral Angle Mapping (SAM) hyperspectral classification is slightly more sensitive but less accurate than multispectral Random Forest (RF) classification, though neither method was above a ~20% detection rate. End products include maps of ash extent derived from both imagery types, a model forecasting future spread scenarios based on current EAB presence, and outreach materials. These products inform APIPP’s management decisions and facilitate public awareness of EAB’s threat to communities within the region.

Liam Megraw↗

NASA NTRS1989

Fatigue delamination onset prediction in tapered composite laminates

Tapered (0 deg) laminates of S2/CE9000 and S2/SP250 glass/epoxies, and IM6/1827I graphite/epoxy were tested in cyclic tension. The specimens usually showed some initial stable delaminations in the tapered region, but these did not affect the stiffness of the specimens, and loading was continued until the specimens either delaminated unstably, or reached 10(exp 6) to 2 x 10(exp 7) million cycles with no unstable delamination. The final unstable delamination originated at the junction of the thin and tapered regions. A finite-element model was developed for the tapered laminate with and without the initial stable delaminations observed in the tests. The analysis showed that for both cases the most likely place for an opening (Mode 1) delamination to originate is at the junction of the taper and thin regions. For each material type, the models were used to calculate the strain energy release rate, G, associated with delaminations originating at that junction and growing either into the thin region or tapered region. For the materials tested, cyclic G(sub Imax) values from DCB tests were used with the maximum strain energy release rates calculated from the finite-element analysis to predict the onset of unstable delamination at the junction as a function of fatigue cycles. The predictions were compared to experimental values of maximum cyclic load as a function of cycles to unstable delamination from fatigue tests in tapered laminates. For the IM6/1827I and S2/SP250 laminates, the predictions agreed very well with the test data. Predicted values for the S2/CE9000 were conservative compared to the test data.

Murri, Gretchen Bostaph↗

NASA NTRS1991

Fatigue delamination onset prediction in unidirectional tapered laminates

Tapered (0 deg) laminates of S2/CE9000 and S2/SP250 glass/epoxies, and IM6/1827I graphite/epoxy were tested in cyclic tension. The specimens usually showed some initial stable delaminations in the tapered region, but these did not affect the stiffness of the specimens, and loading was continued until the specimens either delaminated unstably, or reached 10(exp 6) to 2 x 10 (exp 7) million cycles with no unstable delamination. The final unstable delamination originated at the junction of the thin and tapered regions. A finite-element model was developed for the tapered laminate with and without the initial stable delaminations observed in the tests. The analysis showed that for both cases the most likely place for an opening (Mode I) delamination to originate is at the junction of the taper and thin regions. For each material type, the models were used to calculate the strain energy release rate, G, associated with delaminations originating at that junction and growing either into the thin region or tapered region. For the materials tested, cyclic G(sub Imax) values from DCB tests were used with the maximum strain energy release rates calculated from the finite-element analysis to predict the onset of unstable delamination at the junction as a function of fatigue cycles. The predictions were compared to experimental values of maximum cyclic load as a function of cycles to unstable delamination from fatigue tests in tapered laminates. For the IM6/1827I and S2/SP250 laminates, the predictions agreed very well with the test data. Predicted values for the S2/CE9000 were conservative compared to the test data.

Murri, Gretchen B.↗

NASA NTRS2018

Helium Pressurization Modeling of the EDU Submerged Diffuser Using Thermal Desktop

NASA is currently working on developing its predictive modeling capabilities to support future missions that require long term storage of cryogenic propellants. Through the Evolvable Cryogenics project, Development and Validation of Analysis Tools (DVAT) task, both CFD and multi-node fluid modeling tools are being validated against to increase the following cryogenic fluid management technologies: Self-Pressurization, Pressure Control, Helium Pressurization, de-stratification, jet mixing, Tank and transfer line chill-down, tank filling and transfer. NASA is using previous and future micro-gravity experiments to validate both types of models. Recent activities include: Validation of the Tank Pressure Control Experiment (TPCE), Hydrogen and Helium pressurization, and Completion of the Zero Boil Off Tank (ZBOT) experiment on ISS. Future activities include validation of the ZBOT experiment with both CFD and multi-node analysis tools, validation of the Cryogenic Demonstration System of the Robotic Refueling Mission (RRM3).

low-gravity fluid modeling↗

NASA NTRS2016

Modeling ARRM Xenon Tank Pressurization Using 1D Thermodynamic and Heat Transfer Equations

As a first step in understanding what ground support equipment (GSE) is required to provide external cooling during the loading of 5,000 kg of xenon into 4 aluminum lined composite overwrapped pressure vessels (COPVs), a modeling analysis was performed using Microsoft Excel. The goals of the analysis were to predict xenon temperature and pressure throughout loading at the launch facility, estimate the time required to load one tank, and to get an early estimate of what provisions for cooling xenon might be needed while the tanks are being filled. The model uses the governing thermodynamic and heat transfer equations to achieve these goals. Results indicate that a single tank can be loaded in about 15 hours with reasonable external coolant requirements. The model developed in this study was successfully validated against flight and test data. The first data set is from the Dawn mission which also utilizes solar electric propulsion with xenon propellant, and the second is test data from the rapid loading of a hydrogen cylindrical COPV. The main benefit of this type of model is that the governing physical equations using bulk fluid solid temperatures can provide a quick and accurate estimate of the state of the propellant throughout loading which is much cheaper in terms of computational time and licensing costs than a Computation Fluid Dynamics (CFD) analysis while capturing the majority of the thermodynamics and heat transfer.

Xenon storage↗

NASA NTRS2017

Modeling Xenon Tank Pressurization using One-Dimensional Thermodynamic and Heat Transfer Equations

Thermodynamic tank modeling↗

NASA NTRS2013

Modeling Circumstellar Disks of B-Type Stars with Observations from the Palomar Testbed Interferometer

Geometrical (uniform disk) and numerical models were calculated for a set of B-emission (Be) stars observed with the Palomar Testbed Interferometer (PTI). Physical extents have been estimated for the disks of a total of15 stars via uniform disk models. Our numerical non-LTE models used parameters for the B0, B2, B5, and B8spectral classes and following the framework laid by previous studies, we have compared them to infrared K-band interferometric observations taken at PTI. This is the first time such an extensive set of Be stars observed with long-baseline interferometry has been analyzed with self-consistent non-LTE numerical disk models.

Grzenia, B. J.↗

NASA NTRS2018

Quantifying Boreal Forest Structure and Composition Using UAV Structure from Motion

The vast extent and inaccessibility of boreal forest ecosystems are barriers to routine monitoring of forest structure and composition. In this research, we bridge the scale gap between intensive but sparse plot measurements and extensive remote sensing studies by collecting forest inventory variables at the plot scale using an unmanned aerial vehicle (UAV) and a structure from motion (SfM) approach. At 20 Forest Inventory and Analysis (FIA) subplots in interior Alaska, we acquired overlapping imagery and generated dense, 3D, RGB (red, green, blue) point clouds. We used these data to model forest type at the individual crown scale as well as subplot-scale tree density (TD), basal area (BA), and aboveground biomass (AGB). We achieved 85% cross-validation accuracy for five species at the crown level. Classification accuracy was maximized using three variables representing crown height, form, and color. Consistent with previous UAV-based studies, SfM point cloud data generated robust models of TD (r(sup 2) = 0.91), BA (r(sup 2) = 0.79), and AGB (r(sup 2) = 0.92), using a mix of plot- and crown-scale information. Precise estimation of TD required either segment counts or species information to differentiate black spruce from mixed white spruce plots. The accuracy of species-specific estimates of TD, BA, and AGB at the plot scale was somewhat variable, ranging from accurate estimates of black spruce TD (+/−1%) and aspen BA (−2%) to misallocation of aspen AGB (+118%) and white spruce AGB (−50%). These results convey the potential utility of SfM data for forest type discrimination in FIA plots and the remaining challenges to develop classification approaches for species-specific estimates at the plot scale that are more robust to segmentation error.

aboveground biomass↗

NASA NTRS1993

Orthopyroxenes as recorders of diogenite petrogenesis: Trace element systematics

Eucrite, howardite, and diogenite members of the achondrites are considered, by many, to be genetically related. Therefore, each provide a piece of the puzzle for reconstructing magmatic processes on the eucrite parent body (EPB). The relationship between eucrites and diogenites can be viewed within the context of two distinctly different models: (1) fractional crystallization; and (2) partial melting. In fractional crystallization models, eucrites and diogenites represent a complementary continuum of planetary fractional crystallization products in which the diogenites represent crystal accumulations during the crystallization of eucritic magmas at shallow to deep levels in the EPB. Alternatively, experimental studies may be interpreted as indicating eucrites represent peritectic partial melts of a primitive, chondritic EPB mantle. Within this type of model, the diogenites are also generally considered to be cumulates; however, their petrogenetic relationship to the eucrites is less clear. Sack et al. proposed that the olivine diogenites represent residua from the partial melting events that produced eucritic liquids. Initial trace element studies of orthopyroxene (OPX) are consistent with this model. However, this trace element modeling of the olivine diogenites is nonunique. As a further test of these models, we did the following three things: (1) analyzed OPX from cumulate diogenites to compare with the olibine diogenite data; (2) improved ion microprobe analytical techniques for the analysis of elements critical to our interpretations; and (3) selected more relevant Kd's for OPX-eucritic melt.

Shearer, C. K.↗

NASA NTRS1993

Steady induction effects in geomagnetism. Part 1C: Geomagnetic estimation of steady surficial core motions: Application to the definitive geomagnetic reference field models

In the source-free mantle/frozen-flux core magnetic earth model, the non-linear inverse steady motional induction problem was solved using the method presented in Part 1B. How that method was applied to estimate steady, broad-scale fluid velocity fields near the top of Earth's core that induce the secular change indicated by the Definitive Geomagnetic Reference Field (DGRF) models from 1945 to 1980 are described. Special attention is given to the derivation of weight matrices for the DGRF models because the weights determine the apparent significance of the residual secular change. The derived weight matrices also enable estimation of the secular change signal-to-noise ratio characterizing the DGRF models. Two types of weights were derived in 1987-88: radial field weights for fitting the evolution of the broad-scale portion of the radial geomagnetic field component at Earth's surface implied by the DGRF's, and general weights for fitting the evolution of the broad-scale portion of the scalar potential specified by these models. The difference is non-trivial because not all the geomagnetic data represented by the DGRF's constrain the radial field component. For radial field weights (or general weights), a quantitatively acceptable explication of broad-scale secular change relative to the 1980 Magsat epoch must account for 99.94271 percent (or 99.98784 percent) of the total weighted variance accumulated therein. Tolerable normalized root-mean-square weighted residuals of 2.394 percent (or 1.103 percent) are less than the 7 percent errors expected in the source-free mantle/frozen-flux core approximation.

Voorhies, Coerte V.↗

NASA NTRS1994

Spectral properties of blast-wave models of gamma-ray burst sources

We calculate the spectrum of blast-wave models of gamma-ray burst sources, for various assumptions about the magnetic field density and the relativistic particle acceleration efficiency. For a range of physically plausible models we find that the radiation efficiency is high and leads to nonthermal spectra with breaks at various energies comparable to those observed in the gamma-ray range. Radiation is also predicted at other wavebands, in particular at X-ray, optical/UV, and GeV/TeV energies. We discuss the spectra as a function of duration for three basic types of models, and for cosmological, halo, and galactic disk distances. We also evaluate the gamma-ray fluences and the spectral characteristics for a range of external densities. Impulsive burst models at cosmological distances can satisfy the conventional X-ray paucity constraint S(sub x)/S(sub gamma)less than a few percent over a wide range of durations, but galactic models can do so only for bursts shorter than a few seconds, unless additional assumptions are made. The emissivity is generally larger for bursts in a denser external environment, with the efficiency increasing up to the point where all the energy input is radiated away.

Meszaros, P.↗

NASA NTRS1997

An Ecosystem Simulation Model for Methane Production and Emission from Wetlands

Previous experimental studies suggest that methane emission from wetland is influenced by multiple interactive pathways of gas production and transport through soil and sediment layers to the atmosphere. The objective of this study is to evaluate a new simulation model of methane production and emission in wetland soils that was developed initially to help identify key processes that regulate methanogenesis and net flux of CH4 to the air, but which is designed ultimately for regional simulation using remotely sensed inputs for land cover characteristics. The foundation for these computer simulations is based on a well-documented model (CASA) of ecosystem production and carbon cycling in the terrestrial blaspheme. Modifications to represent flooded wetland soils and anaerobic decomposition include three new sub-models for: (1) layered soil temperature and water table depth (WTD) as a function of daily climate drivers, (2) CH4 production within the anoxic soil layer as a function of WTD and CO2 production under poorly drained conditions, and (3) CH4 gaseous transport pathways (molecular diffusion, ebullition, and plant vascular transport) as a function of WTD and ecosystem type. The model was applied and tested using climate and ecological data to characterize tundra wetland sites near Fairbanks, Alaska studied previously by Whalen and Reeburgh. Comparison of model predictions to measurements of soil temperature and thaw depth, water-table depth, and CH4 emissions over a two year period suggest that inter-site differences in soil physical conditions and methane fluxes could be reproduced accurately for selected periods. Day-to-day comparison of predicted emissions to measured CH4 flux rates reveals good agreement during the early part of the thaw season, but the model tends to underestimate production of CH4 during the months of July and August in both test years. Important seasonal effects, including that of falling WTD during these periods, are apparently overlooked in the model formulation. Nevertheless, reasonably close agreement was achieved between the model's mean daily and seasonal estimates of CH4 flux and observed emission rates for northern wetland ecosystems. Several features of the model are identified as crucial to more accurate prediction of wetland methane emission, including the capacity to incorporate influences of localized topographic and hydrologic features on site-specific soil temperature and WTD dynamics, and mechanistic simulation of methane emission transport pathways from within the soil profile.

Potter, C. S.↗

NASA NTRS1990

Energy balance in the solar transition region. I - Hydrostatic thermal models with ambipolar diffusion

The energy balance in the lower transition region is analyzed by constructing theoretical models which satisfy the energy balance constraint. The energy balance is achieved by balancing the radiative losses and the energy flowing downward from the corona. This energy flow is mainly in two forms: conductive heat flow and hydrogen ionization energy flow due to ambipolar diffusion. Hydrostatic equilibrium is assumed, and, in a first calculation, local mechanical heating and Joule heating are ignored. In a second model, some mechanical heating compatible with chromospheric energy-balance calculations is introduced. The models are computed for a partial non-LTE approach in which radiation departs strongly from LTE but particles depart from Maxwellian distributions only to first order. The results, which apply to cases where the magnetic field is either absent, or uniform and vertical, are compared with the observed Lyman lines and continuum from the average quiet sun. The approximate agreement suggests that this type of model can roughly explain the observed intensities in a physically meaningful way, assuming only a few free parameters specified as chromospheric boundary conditions.

Fontenla, J. M.↗

NASA NTRS1991

The use of activity-based cost estimation as a management tool for cultural change

It will be shown that the greatest barrier to American exploration of the planet Mars is not the development of the technology needed to deliver humans and return them safely to earth. Neither is it the cost of such an undertaking, as has been previously suggested, although certainly, such a venture may not be inexpensive by some measures. The predicted costs of exploration have discouraged serious political dialog on the subject. And, in fact, even optimistic projections of the NASA budget do not contain the resources required, under the existing development and management paradigm, for human space exploration programs. It will be demonstrated that the perception of the costs of such a venture, and the cultural responses to the perceptions are factors inhibiting American exploration of the moon and the planet Mars. Cost models employed in the aerospace industry today correctly mirror the history of past space programs, and as such, are representative of the existing management and development paradigms. However, if, under this current paradigm no major exploration programs are feasible, then cost analysis methods based in the past may not have great utility in exploring the needed cultural changes. This paper explores the use of a new type of model, the activity based cost model, which will treat management style as an input variable, in a sense providing a tool whereby a complete, affordable program might be designed, including both the technological and management aspects.

Mandell, Humboldt↗

NASA NTRS1993

(abstract) Monitoring Seasonal State and Mapping Species in Alaskan Taiga Using Imaging Radar as Input to CO(sub 2) Flux Models

Changes in the seasonal CO(sub 2) flux of the boreal forests may result from increased atmospheric CO(sub 2) concentrations and associated atmospheric warming. To monitor this potential change, a combination of remote sensing information and ecophysiological models are required. In this paper we address the use of synthetic aperture radar (SAR) data to provide some of the input to the ecophysiological models: forest type, freeze/thaw state which limits the growing season for conifers, and leaf on/off state which limits the growing season for deciduous species. AIRSAR data collected in March 1988 during an early thaw event and May 1991 during spring breakup are used to generate species maps and to determine the sensitivity of SAR to canopy freeze/thaw transitions. These data are also used to validate a microwave scattering model which is then used to determine the sensitivity of SAR to leaf on/off and soil freeze/thaw transitions. Finally, a CO(sub 2) flux algorithm which utilizes SAR data and an ecophysiological model to estimate CO(sub 2) flux is presented. CO(sub 2) flux maps are generated from which areal estimates of CO(sub 2) flux are derived.

leaf cover boreal forests radar backscatter↗

NASA NTRSDate not supplied

Impact of Space Radiation with Other Combined Space Environmental Factors on Plant Seeds and Plant Development: from Arabidopsis thaliana to Crops

One of the major concerns for long-term exploration missions beyond Earth’s magnetosphere is radiation risk, primarily from solar particle events (SPE) and galactic cosmic rays (GCR). With the goal of manned Mars exploration, the production of fresh food during long-duration space missions provides critical nutritional supplementation and may also benefit astronauts’ behavioral health. However, the effects of space radiation on plants and plant propagules have not been sufficiently investigated and characterized. To evaluate the effects of space radiation on plant seeds and development, we explored several platforms, including ground-based radiation facilities, the MISSE platform outside the ISS, and other Low Earth Obit (LEO) opportunities. Radiation particle types ranged from neutrons, single charged particles, simulated galactic cosmic rays, simulated solar particle events, the radiation field outside the ISS (total 10 months on the ISS), and the field inside a LEO vehicle (over 3 years). Radiation doses ranged from around 10 cGy to 80 cGy with acute or chronic exposures. In these studies up to 15 types of model plant and crop seeds were evaluated. In addition, tests were conducted to determine whether the combination of radiation exposure and simulated microgravity could have synergetic effects. Exposure to space radiation at the levels tested had no significant impact on the germination rate in Arabidopsis and the seeds from multiple crop plants; however, radiation exposure alone or with other combined factors reduced the viability of some seed types. Overall, the changes within plants grown from irradiated seeds were dose- and ion quality- dependent, with heavier ions causing more severe damage. These changes ranged from cotyledon deformation, shortened root length, smaller seedling size, and other signs of stress, depending on the seed types. Radiation exposure also significantly altered transcriptomic profiles in seedlings grown from irradiated seeds. The impact of space radiation on seeds and plants potentially affects the ability of plants to adapt to other environmental stresses (e.g. microgravity, water stress, and hardware constraints) as well as susceptibility to plant diseases, which need to be furtherly investigated.

Y Zhang↗