Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mixed phase”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Aerosol effects on the anvil characteristics, cold pool forcing and stratiform-convective precipitation partitioning and latent heating of mesoscale convective systems

The overarching science goal of this project has been to assess the impacts of aerosols on mesoscale convective systems (MCSs). More specifically we have investigated the impacts of (a) aerosol types, (b) aerosol concentrations, and (c) the vertical and horizontal location of aerosols on the (1) anvil cloud characteristics and feedbacks; (2) total precipitation and the partitioning between convective and stratiform precipitation; (3) the vertical heating structure; (4) hydrometeor size distributions; and (5) the strength and intensity of the cold pools and updrafts. These have been achieved both through observational analyses and high-resolution cloud-resolving model simulations of three MCSs that were observed during the MC3E field campaign (25 April, 20 May and 23 May 2011). The primary findings of these research are the following: Condensation and deposition are the primary contributors to MCS latent warming, when compared to riming and nucleation processes. In terms of MCS latent cooling, sublimation, melting, and evaporation all play significant roles. Throughout the MCS lifecycle, convective regions demonstrate an approximately linear decrease in the magnitudes of latent heating rates, while latent heating within stratiform regions is associated with transitions between MCS flow regimes including the rear inflow jet. Such information regarding the temporal evolution of latent heating within convective and stratiform MCS regions could be useful in developing parameterizations representing convective organization. Increasing aerosol concentration from a clean continental to a highly polluted state produces an increase in the riming rates of cloud water, which results in less lofted cloud water in polluted environments. Aerosol-induced trends in the cloud mixing ratio profiles are, however, nonmonotonic in the mixed phase region, such that a moderate increase in aerosol concentration produces the greatest reduction in cloud water. Less lofted cloud water due to enhanced riming rates leads to reduced anvil ice mixing ratios but to greater numbers of small ice crystals within the anvil. In spite of reduced anvil ice mixing ratio, the anvil clouds exhibit greater areal coverage, increased albedo, reduced cloud top cooling, and reduced net radiative flux, which produces an aerosol-induced warming (reduced cooling) effect in these MCSs. Lower-tropospheric aerosol particles largely influence the MCS precipitation response directly rearward of the leading cold pool boundary. However, further backward in the MCS, the relative impact of lower- versus mid-tropospheric aerosol particles is strongly dependent on the MCS structure and differences in the line-normal wind shear. Mid-tropospheric aerosol particles are able to activate new cloud droplets in the mid-tropospheric levels of convective updrafts and thereby enhance mixed-phase precipitation through increased cloud riming.

54 ENVIRONMENTAL SCIENCES↗

Phase coexistence and domain configuration in Pb(Mg 1/3 Nb 2/3 )O 3 -0.34PbTiO 3 single crystal revealed by synchrotron-based X-ray diffractive three-dimensional reciprocal space mapping and piezoresponse force microscopy

The crystalline phases and domain configuration in the morphotropic phase boundary composition Pb(Mg 1/3 Nb 2/3 )O 3 -0.34PbTiO 3 (PMN-0.34PT) single crystal have been investigated by synchrotronbased X-ray 3D Reciprocal Space Mapping (3D-RSM) and Piezoresponse Force Microscopy. The coexistence of tetragonal (T) and monoclinic MC phases in this PMN-0.34PT single crystal is confirmed. The affiliation of each diffraction spot in the 3D-RSM was identified with the assistance of qualitative simulation. Most importantly, the twinning structure between different domains in such a mixed phase PMN-PT crystal is firmly clarified, and the spatial distribution of different twin domains is demonstrated. Additionally, the lattice parameters of T and MC phases in PMN-0.34PT single crystal as well as the tilting angles of crystal lattices caused by the interfacial lattice mismatch are determined.

36 MATERIALS SCIENCE↗

Nonlinear absorption of short intense laser pulse in multispecies plasma

In the present paper, the detailed investigation concerning the effect of inclusion of heavy negative ions into the finite background plasma on the laser absorption has been carried out by employing particle-in-cell simulation method. For this purpose, in this configuration, the laser energy absorption relying on the nonlinear phenomena such as phase-mixing, wave-breaking, and scattering has been studied in the Raman-Brillouin regime. It is shown that the inclusion of heavy negative ions suppresses the scattering while increases the phase-mixing time. Moreover, it is illustrated that this inclusion can increase the laser absorption in finite plasma environment, after saturation. The obtained results are expected to be relevant to the experiments on the mass spectrometry with laser desorption techniques as well as on the laser-plasma interaction with application to particles acceleration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Statistics of Cloud Optical Properties from Airborne Lidar Measurements

Cloud optical properties, such as extinction-to-backscatter ratio and depolarization ratio, have a significant impact on the accuracy of cloud extinction retrievals from lidar systems because parameterizations of these variables are often used in non-ideal conditions to determine cloud type and optical depth. Statistics and trends of these optical parameters were analyzed for four years, 2003-2007, of Cloud Physics Lidar data during five projects of varying geographic locations. Extinction-to-backscatter ratio (at 532 nm) was derived by calculating the transmission loss through the cloud layer, while depolarization ratio was computed using the parallel and perpendicular polarized 1064 nm channels. The majority of the cloud layers yielded an S-ratio between 10 and 40 sr with the S-ratio frequency distribution centered at 25 sr for ice clouds, 21 sr for mixed phase clouds, and 11 sr for water clouds. On average for ice clouds, S ratio slightly decreased with decreasing temperature, while depolarization ratio increased significantly as temperatures decreased. Trends for water and mixed phase clouds were also observed. Ultimately, these observed trends in optical properties as a function of temperature and geographic location will improve current parameterizations of extinction-to-backscatter ratio, which consequently increases accuracy in cloud optical depth and radiative forcing estimates.

Yorks, John E.↗

Towards Mixed Ionic and Electronic Conducting Li-Stuffed Garnets

Li-stuffed garnet-type Li 7 La 2.75 Ca 0.25 Zr 1.75 Nb 0.25 O 12 (LLCZNO) and Li 7+y La 2.75 Ca 0.25 Zr 1.75-y Nb 0.25 MyO 12 (M = Mn, Fe, Co, Ni; y = 0.1, 0.2, referred to as yM-LLCZNO) were synthesized in air by ceramic synthesis at different sintering temperatures. The resulting compositions were characterized for their phase formation and microstructure, and their ionic and electronic conductivities in air and 7% H 2 /N 2 . Powder X-ray diffraction showed that transition metal-doped LLCZNO garnets contain several impurity phases. The transition metal-substituted samples have lower conductivities than that of the parent LLCZNO. The electronic conductivities of selected transition metal-doped LLCZNO samples were found to be about 4 to 5 orders of magnitude lower than their corresponding ionic conductivity, highlighting the challenge to design single-phase mixed electronic and ionic conducting Li-stuffed garnets in both oxidizing and reducing atmospheres. The research area of single-phase mixed conducting Li-garnet is relatively unexplored at the moment, and a theoretical study will help to elucidate the underlying challenge in doping transition metal in Li-based garnets structure and its effect on transport properties.

25 ENERGY STORAGE↗

Comparison of an alternative and existing binning methods to reduce the acquisition duration of 4D PET/CT

Purpose: Respiratory motion is a source of artifacts that reduce image quality in PET. Four dimensional (4D) PET/CT is one approach to overcome this problem. Existing techniques to limiting the effects of respiratory motions are based on prospective phase binning which requires a long acquisition duration (15–25 min). This time is uncomfortable for the patients and limits the clinical exploitation of 4D PET/CT. In this work, the authors evaluated an existing method and an alternative retrospective binning method to reduce the acquisition duration of 4D PET/CT. Methods: The authors studied an existing mixed-amplitude binning (MAB) method and an alternative binning method by mixed-phases (MPhB). Before implementing MPhB, they analyzed the regularity of the breathing patterns in patients. They studied the breathing signal drift and missing CT slices that could be challenging for implementing MAB. They compared the performance of MAB and MPhB with current binning methods to measure the maximum uptake, internal volume, and maximal range of tumor motion. Results: MPhB can be implemented depending on an optimal phase (in average, the exhalation peak phase −4.1% of the entire breathing cycle duration). Signal drift of patients was in average 35% relative to the breathing amplitude. Even after correcting this drift, MAB was feasible in 4D CT for only 64% of patients. No significant differences appeared between the different binning methods to measure the maximum uptake, internal volume, and maximal range of tumor motion. The authors also determined the inaccuracies of MAB and MPhB to measure the maximum amplitude of tumor motion with three bins (less than 3 mm for movement inferior to 12 mm, up to 6.4 mm for a 21 mm movement). Conclusions: The authors proposed an alternative binning method by mixed-phase binning that halves the acquisition duration of 4D PET/CT. Mixed-amplitude binning was challenging because of signal drift and missing CT slices. They showed that more than three bins were necessary for a more accurate measurement of the maximum amplitude of the tumor motion. However, the current 4D-CT technology limits the increase of the number of bins in 4D PET/CT because of missing CT slices. One can reconstruct 4D PET images with more bins but without attenuation/scatter correction.

60 APPLIED LIFE SCIENCES↗

Liberation and release of rare earth minerals from Middle Kittanning, Fire Clay, and West Kentucky No. 13 coal sources

Here, a laboratory REE release test procedure was designed to better understand the association and liberation characteristics of rare earth elements (REEs) from coal-based material, such as coal middlings and refuse. For this particular study, three samples of mixed-phase, middling material was collected from three coal preparation plants operating in three different coal basins and coal seams, namely Fire Clay, Middle Kittanning, and West Kentucky #13. In these release tests, the mixed-phase material was first ground in a laboratory ball mill for a designated amount of time and subsequently decarbonized using staged flotation. The REE content of the high ash tailings and low ash concentrate was determined, and the process was repeated for various target grind sizes down to the micron range. The results indicate that smaller grind sizes produce increased REE concentrations in the high ash tailings, and this result is predominantly driven by the increased ash content in the decarbonized tailings. The grinding characteristics of the Fire Clay coal source showed that more energy is needed to achieve the desired particle size reduction; however further size reduction of this sample resulted in a significantly higher ash and REE content in the tailings material due to improved liberation. For the Middle Kittanning and West Kentucky #13 sources, the grinding and release data indicates that the mineral matter is liberated at a coarser particle size, and micronizing the coals only produces marginal improvements in rare earth mineral liberation and recovery.

01 COAL, LIGNITE, AND PEAT↗

Photoreduction of CO{sub 2} by TiO{sub 2} nanocomposites synthesized through reactive direct current magnetron sputter deposition.

The photoreduction of CO{sub 2} into methane provides a carbon-neutral energy alternative to fossil fuels, but its feasibility requires improvements in the photo-efficiency of materials tailored to this reaction. We hypothesize that mixed phase TiO{sub 2} nano-materials with high interfacial densities are extremely active photocatalysts well suited to solar fuel production by reducing CO{sub 2} to methane and shifting to visible light response. Mixed phase TiO{sub 2} films were synthesized by direct current (DC) magnetron sputtering and characterized by X-ray diffraction (XRD), atomic force microscope (AFM), scanning electron microscope (SEM) and transmission electron microscope (TEM). Bundles of anatase-rutile nano-columns having high densities of two kinds of interfaces (those among the bundles and those between the columns) are fabricated. Films sputtered at a low deposition angle showed the highest methane yield, compared to TiO{sub 2} fabricated under other sputtering conditions and commercial standard Degussa P25 under UV irradiation. The yield of methane could be significantly increased ({approx} 12% CO{sub 2} conversion) by increasing the CO{sub 2} to water ratio and temperature (< 100 C) as a combined effect. These films also displayed a light response strongly shifted into the visible range. This is explained by the creation of non-stoichiometric titania films having unique features that we can potentially tailor to the solar energy applications.

03 NATURAL GAS↗

Robotic pendant drop: containerless liquid for μs-resolved, AI-executable XPCS

Abstract The dynamics and structure of mixed phases in a complex fluid can significantly impact its material properties, such as viscoelasticity. Small-angle X-ray Photon Correlation Spectroscopy (SA-XPCS) can probe the spontaneous spatial fluctuations of the mixed phases under various in situ environments over wide spatiotemporal ranges (10 −6 –10 3 s /10 −10 –10 −6 m). Tailored material design, however, requires searching through a massive number of sample compositions and experimental parameters, which is beyond the bandwidth of the current coherent X-ray beamline. Using 3.7-μs-resolved XPCS synchronized with the clock frequency at the Advanced Photon Source, we demonstrated the consistency between the Brownian dynamics of ~100 nm diameter colloidal silica nanoparticles measured from an enclosed pendant drop and a sealed capillary. The electronic pipette can also be mounted on a robotic arm to access different stock solutions and create complex fluids with highly-repeatable and precisely controlled composition profiles. This closed-loop, AI-executable protocol is applicable to light scattering techniques regardless of the light wavelength and optical coherence, and is a first step towards high-throughput, autonomous material discovery.

36 MATERIALS SCIENCE↗

Magnetic structure and properties of the compositionally complex perovskite (Y 0.2 La 0.2 Pr 0.2 Nd 0.2 Tb 0.2 )MnO 3

Large configurational disorder in compositionally complex ceramics can lead to unique functional properties that deviate from traditional rules of alloy mixing. In recent years, compositionally complex oxides (CCOs) have shown intriguing magnetic behavior including long-range order, enhanced magnetic exchange couplings, and mixed phase magnetic structures. This work focuses on how large local spin disorder affects magnetic ordering in a CCO. Specifically, we investigated the A-site alloyed perovskite, (Y 0.2 La 0.2 Pr 0.2 Nd 0.2 Tb 0.2 )MnO 3 , or (5A)MnO 3 , using a combination of bulk magnetometry, synchrotron X-ray diffraction, and temperature-dependent neutron diffraction. The five A-site ions have an average spin and ionic radius nearly equal to that of Nd 3+ ions, which minimizes structural distortions and allows for an understanding of the local spin disorder effects through a direct comparison with NdMnO 3 . Our magnetometry data show that (5A)MnO 3 exhibits two distinct phase transitions associated with the A-site and B-site sublattices, as seen in NdMnO 3 , as well as the presence of domain pinning and exchange bias at low temperature, suggesting a mixed phase magnetic ground state, as seen in other magnetic CCOs. Neutron powder diffraction shows clear long-range antiferromagnetic ordering below 67 K and refines to a Pn'ma' magnetic structure at low temperature, in excellent agreement with the well-studied behavior of NdMnO 3 . The two most notable differences in (5A)MnO 3 magnetism apparent from our data are a slight suppression of the B-site ordering temperature, which is explained by a smaller Mn–O–Mn bond angle in (5A)MnO 3 than NdMnO 3 , and the presence of a magnetic susceptibility transition above the B-site ordering, which could indicate the formation of a cluster glass but requires further study. Finally, this work demonstrates a general method of isolated investigation of size and spin disorder in CCOs and motivates future work using local structure probes to better understand the effects of nanoscale clustering and local spin disorder in magnetic CCOs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluating cloud liquid detection against Cloudnet using cloud radar Doppler spectra in a pre-trained artificial neural network

Detection of liquid-containing cloud layers in thick mixed-phase clouds or multi-layer cloud situations from ground-based remote-sensing instruments still poses observational challenges, yet improvements are crucial since the existence of multi-layer liquid layers in mixed-phase cloud situations influences cloud radiative effects, cloud lifetime, and precipitation formation processes. Hydrometeor target classifications such as from Cloudnet that require a lidar signal for the classification of liquid are limited to the maximum height of lidar signal penetration and thus often lead to underestimations of liquid-containing cloud layers. Here we evaluate the Cloudnet liquid detection against the approach of Luke et al. (2010) which extracts morphological features in cloud-penetrating cloud radar Doppler spectra measurements in an artificial neural network (ANN) approach to classify liquid beyond full lidar signal attenuation based on the simulation of the two lidar parameters particle backscatter coefficient and particle depolarization ratio. We show that the ANN of Luke et al. (2010) which was trained under Arctic conditions can successfully be applied to observations at the mid-latitudes obtained during the 7-week-long ACCEPT field experiment in Cabauw, the Netherlands, in 2014. In a sensitivity study covering the whole duration of the ACCEPT campaign, different liquid-detection thresholds for ANN-predicted lidar variables are applied and evaluated against the Cloudnet target classification. Independent validation of the liquid mask from the standard Cloudnet target classification against the ANN-based technique is realized by comparisons to observations of microwave radiometer liquid-water path, ceilometer liquid-layer base altitude, and radiosonde relative humidity. In addition, a case-study comparison against the cloud feature mask detected by the space-borne lidar aboard the CALIPSO satellite is presented. Three conclusions were drawn from the investigation. First, it was found that the threshold selection criteria of liquid-related lidar backscatter and depolarization alone control the liquid detection considerably. Second, all threshold values used in the ANN framework were found to outperform the Cloudnet target classification for deep or multi-layer cloud situations where the lidar signal is fully attenuated within low liquid layers and the cloud radar is able to detect the microphysical fingerprint of liquid in higher cloud layers. Third, if lidar data are available, Cloudnet is at least as good as the ANN. The times when Cloudnet outperforms the ANN in liquid detections are often associated with situations where cloud dynamics smear the imprint of cloud microphysics on the radar Doppler spectra.

54 ENVIRONMENTAL SCIENCES↗

Synergetic Use of the WSR-88D Radars, GOES-R Satellites, and Lightning Networks to Study Microphysical Characteristics of Hurricanes

Abstract This study analyzes the microphysics and precipitation pattern of Hurricanes Harvey (2017) and Florence (2018) in both the eyewall and outer rainband regions. From the retrievals by a satellite red–green–blue scheme, the outer rainbands show a strong convective structure while the inner eyewall has less convective vigor (i.e., weaker upper-level reflectivities and electrification), which may be related to stronger vertical wind shear that hinders fast vertical motions. The WSR-88D column-vertical profiles further confirm that the outer rainband clouds have strong vertical motion and large ice-phase hydrometeor formation aloft, which correlates well with 3D Lightning Mapping Array source counts in height and time. From the results from this study, it is determined that the inner eyewall region is dominated by warm rain, whereas the external rainband region contains intense mixed-phase precipitation. External rainbands are defined here as those that reside outside of the main hurricane circulation, associated with surface tropical storm wind speeds. The synergy of satellite and radar dual-polarization parameters is instrumental in distinguishing between the key microphysical features of intense convective rainbands and the warm-rain-dominated eyewall regions within the hurricanes. Substantial amounts of ice aloft and intense updrafts in the external rainbands are indicative of heavy surface precipitation, which can have important implications for severe weather warnings and quantitative precipitation forecasts. The novel part of this study is to combine ground-based radar measurement with satellite observations to study hurricane microphysical structure from surface to cloud top so as to fill in the gaps between the two observational techniques.

Meteorology & Atmospheric Sciences↗

Examining conditions supporting the development of anomalous charge structures in supercell thunderstorms in the Southeastern United States

Hypotheses regarding favorable conditions for anomalous charging have primarily resulted from studies within the Great Plains region of the United States, where the efficiency of warm precipitation processes is thought to be fundamental. Rare observations of anomalous charge structures in the Southeastern region challenge existing conceptual models used to explain anomalous charging. As a rigorous evaluation of conditions that support anomalous charge structures, environmental characteristics and bulk kinematic and microphysical properties of two normal and two anomalous supercell thunderstorms observed in the Southeast were compared in this paper. Within the anomalous supercells, greater quantities of precipitation ice were identified at higher altitudes and colder temperatures, suggesting a greater depth of riming growth and increased vertical transport of rimed hydrometeors. Deeper anomalous supercell updrafts were larger and stronger in the upper mixed-phase and glaciated regions. However, normal supercells were characterized by more robust low-level updrafts, resulting in comparable warm cloud residence times that suggested warm precipitation processes were not necessarily less efficient in the anomalous supercells. Indications of enhanced mixed-phase liquid water content in favor of anomalous charging were observed in the anomalous supercells, though contrasts in related environmental parameters were not as large as observed in other comparative studies. Anomalous supercell environments were characterized by increased instability, shallower warm cloud depth, as well as lower relative humidity in the 700 mb to 500 mb layer. Evidence of impacts from dry air in anomalous storm structures suggested that water vapor content may have affected particle-scale charge transfer in support of anomalous charge structure development.

54 ENVIRONMENTAL SCIENCES↗

An Initial Study of the Fundamentals of Ice Crystal Icing Physics in the NASA Propulsion Systems Laboratory

This presentation shows results from an initial study of the fundamental physics of ice-crystal ice accretion using the NASA Propulsion Systems Lab (PSL). Ice accretion due to the ingestion of ice-crystals is being attributed to numerous jet-engine power-loss events. The NASA PSL is an altitude jet-engine test facility which has recently added a capability to inject ice particles into the flow. NASA is evaluating whether this facility, in addition to full-engine and motor-driven-rig tests, can be used for more fundamental ice-accretion studies that simulate the different mixed-phase icing conditions along the core flow passage of a turbo-fan engine compressor. The data from such fundamental accretion tests will be used to help develop and validate models of the accretion process. The present study utilized a NACA0012 airfoil. The mixed-phase conditions were generated by partially freezing the liquid-water droplets ejected from the spray bars. This presentation shows data regarding (1) the freeze out characteristics of the cloud, (2) changes in aerothermal conditions due to the presence of the cloud, and (3) the ice accretion characteristics observed on the airfoil model. The primary variable in this test was the PSL plenum humidity which was systematically varied for two duct-exit-plane velocities (85 and 135 ms) as well as two particle size clouds (15 and 50 m MVDi). The observed clouds ranged from fully glaciated to fully liquid, where the liquid clouds were at least partially supercooled. The air total temperature decreased at the test section when the cloud was activated due to evaporation. The ice accretions observed ranged from sharp arrow-like accretions, characteristic of ice-crystal erosion, to cases with double-horn shapes, characteristic of supercooled water accretions.

upwind schemes↗

An Initial Study of the Fundamentals of Ice Crystal Icing Physics in the Nasa Propulsion Systems Laboratory

This paper presents results from an initial study of the fundamental physics of ice-crystal ice accretion using the NASA Propulsion Systems Lab (PSL). Ice accretion due to the ingestion of ice-crystals is being attributed to numerous jet-engine power-loss events. The NASA PSL is an altitude jet-engine test facility which has recently added a capability to inject ice particles into the flow. NASA is evaluating whether this facility, in addition to full-engine and motor-driven-rig tests, can be used for more fundamental ice-accretion studies that simulate the different mixed-phase icing conditions along the core flow passage of a turbo-fan engine compressor. The data from such fundamental accretion tests will be used to help develop and validate models of the accretion process. The present study utilized a NACA0012 airfoil. The mixed-phase conditions were generated by partially freezing the liquid-water droplets ejected from the spray bars. This paper presents data regarding (1) the freeze out characteristics of the cloud, (2) changes in aerothermal conditions due to the presence of the cloud, and (3) the ice accretion characteristics observed on the airfoil model. The primary variable in this test was the PSL plenum humidity which was systematically varied for two duct-exit-plane velocities (85 and 135 ms) as well as two particle size clouds (15 and 50 m MVDi). The observed clouds ranged from fully glaciated to fully liquid, where the liquid clouds were at least partially supercooled. The air total temperature decreased at the test section when the cloud was activated due to evaporation. The ice accretions observed ranged from sharp arrow-like accretions, characteristic of ice-crystal erosion, to cases with double-horn shapes, characteristic of supercooled water accretions.

Evaporative Cooling↗

Operando MAS NMR Reaction Studies at High Temperatures and Pressures

Operando MAS-NMR studies provide unique insights into the details of chemical reactions; comprehensive information about temperature- and time-dependent changes in chemical species is accompanied by similarly rich information about changes in phase and chemical environment. Here we describe a new MAS-NMR rotor (the WHiMS rotor) capable of achieving internal pressures up to 400 bar at 20 °C or 225 bar at 250 °C, a range which includes many reactions of interest. The MAS-NMR spectroscopy enabled by these rotors is ideal for studying the behavior of mixed-phase systems, such as reactions involving solid catalysts and volatile liquids, with the potential to add gases at high pressure. The versatile operation of the new rotors is demonstrated by collecting operando 1H and 13C spectra during the hydrogenolysis of benzyl phenyl ether, catalyzed by Ni/-Al2O3 at ca. 250 ºC, both with and without H2 (g) supplied to the rotor. The 2-propanol solvent, which exists in the supercritical phase under these reaction conditions, serves as an internal source of H2. The NMR spectra provide detailed kinetic profiles for the formation of the primary products toluene and phenol, as well as secondary hydrogenation and etherification products.

Walter, Eric D.↗

Examination of Through-Thickness/Through-Time Phase Evolution during an MOD-Type REBCO Precursor Conversion Using Raman Microsscopy

Through-thickness/through-time composition analyses were made on REBa{sub 2}Cu{sub 3}O{sub 6+x} (REBCO) films prepared from metal-organic deposited (MOD) precursors on a RABiTS (rolling-assisted biaxially textured substrate) template. Y Dy{sub 0.5}Ba{sub 2}Cu{sub 3}O{sub 6 + x} films were fabricated either by a single precursor coating or by two separate, equivalent precursor coatings with an intermediate decomposition. Specimens were quenched at selected times along a heat treatment profile that simulated conditions used by American Superconductor, then examined by Raman microscopy along mechanically milled slopes through the REBCO films. Upon reaching the reaction temperature TR, the precursor initially transforms into a (Y, Dy){sub 2}Cu{sub 2}O{sub 5}, CuO, Cu{sub 2}O, and RE-Ba-F-O phase mix, and this is followed shortly by substrate level REBCO formation that propagates upwards through time. Our results indicate that (1) the single layer (SL) and double layer (DL) films (both {approx} 1.2 {mu}m thick) react to completion at about the same rate and arrive at a similar final composition and (2) some residual Ba-Cu-O phases persist near the top of the fully reacted films. The performance of the SL film was moderately better than that of the DL film, seemingly due to better through-thickness REBCO texture as determined using x-ray diffraction.

36 MATERIALS SCIENCE↗

Combining disdrometer, microscopic photography, and cloud radar to study distributions of hydrometeor types, size and fall velocity

Addressing solid precipitation poses additional challenges compared to warm rain due to complex hydrometeor shapes involved, including the dependence of fall velocity on hydrometeor sizes, hydrometeor size distributions, and hydrometeor classification. This study is an extension of our previous work (Niu et al., 2010) to address these challenges by combining measurements from a PARSIVEL disdrometer, microscope photography, and millimeter wavelength cloud radar. The combined measurements are analyzed to classify the precipitation hydrometeor types, examine the dependence of fall velocity on hydrometeor sizes for different hydrometeor types, and determine the best distributions to describe the hydrometeor size distributions of different hydrometeor types. The results show: (1) Hydrometeors can be classified to four main types of raindrop, graupel, snowflake and mixed-phase according to the dependence of terminal velocity on particle sizes, corresponding microscope photos and cloud radar observations; (2) There are significant scatters in fall velocity for a given hydrometer size velocities, and the fall velocity spread for the solid hydrometeors appear wider than that for raindrops across hydrometeor sizes, with that for the mixed-phase precipitation being largest, suggesting that the effects of hydrometeor shape on hydrometeor fall velocities; (3) Hydrometeor size distributions for the four types can all be well described by the Gamma or Weibull distribution; Weibull (Gamma) distribution performs better when skewness is less (larger) than 2.

54 ENVIRONMENTAL SCIENCES↗