Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “methane conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Efficient Synthetic Natural Gas Production from Direct Air Capture Using Titania-Based Dual Function Materials

Converting atmospheric CO2 into methane offers a compelling pathway to store intermittent renewable electricity and enhance energy security using existing natural gas infrastructure. However, current CO2 utilization approaches remain energy- and capital-intensive, largely due to the need for separate capture, purification, and conversion steps. Integrating CO2 capture with catalytic methanation represents a transformative strategy for process intensification on both the unit operation and molecular levels. We report a series of Ru-Na/TiO2 dual function materials (DFMs) for a reactive carbon capture (RCC) process consisting of simulated direct air capture and subsequent CO2 methanation (DACM). Superior methane desorption purity was observed on TiO2-based DFMs (>94 %) relative to state-of-the-art Al2O3-supported DFMs (77 %). Modifying the process to begin CO2 adsorption immediately following the methanation stage, rather than beginning adsorption near ambient temperature, resulted in >97 % methane desorption purity, suitable for injection into the natural gas pipeline without additional CO2 separation steps.

organic↗

Polarization of Light by Leaves and Plant Canopies

This talk will focus first on the information contained in the surface-scattered light from leaves, plant canopies and surface waters. This light is in general polarized and depends upon surface roughness. Thus, for example, - The surface reflection from shiny green leaves measured in the specular direction shows no chlorophyll absorption bands, no 'red edge.' - Conversely, the degree of linear polarization of such light displays marked variation with wavelength having local maxima in the chlorophyll absorption bands and an inverted red edge. - Plant canopies with shiny leaves distributed in angle like the area on a sphere, specularly reflect sunlight in the subsolar or specular direction- but also in every other view direction. - Canopies of green plants may appear white not green when viewed obliquely toward the sun. - In a light to moderate wind, the often blindingly bright glitter of sunlight off smooth water surfaces provides a strong, angularly narrow signature reflection characteristic of inundated vegetated areas that are big sources of atmospheric methane, a climatically important greenhouse gas. (Conversely, a blindingly bright glitter-type reflection is uncharacteristic of upland or wind ruffled open water areas that are poor sources of atmospheric methane.) Because some of these results may be 'head scratchers,' it's always important to properly calibrate ones instruments. Indeed, as the second portion of the talk will show, the characteristics of the light measuring instrument, particularly its entrance aperture, may affect the results and should be taken into account during across-instrument data comparisons.

Vanderbilt, V. C.↗

Abundant carbon substrates drive extremely high sulfate reduction rates and methane fluxes in Prairie Pothole Wetlands

Inland waters are increasingly recognized as critical sites of methane emissions to the atmosphere, but the biogeochemical reactions driving such fluxes are less well understood. The Prairie Pothole Region (PPR) of North America is one of the largest wetland complexes in the world, containing millions of small, shallow wetlands. The sediment pore waters of PPR wetlands contain some of the highest concentrations of dissolved organic carbon (DOC) and sulfur species ever recorded in terrestrial aquatic environments. Using a suite of geochemical and microbiological analyses we measured the impact of sedimentary carbon and sulfur transformations in these wetlands on methane fluxes to the atmosphere. This research represents the first study of coupled geochemistry and microbiology within the PPR, and demonstrates how the conversion of abundant labile DOC pools into methane results in some of the highest fluxes of this greenhouse gas to the atmosphere ever reported. Abundant DOC and sulfate additionally supported some of the highest sulfate reduction rates ever measured in terrestrial aquatic environments, which we infer to account for a large fraction of carbon mineralization in this system. Methane accumulations in zones of active sulfate reduction may be due to either the transport of free methane gas from deeper locations, or the co-occurrence of methanogenesis and sulfate reduction. If both respiratory processes are concurrent, any competitive inhibition of methanogenesis by sulfate-reducing bacteria may be lessened by the presence of large labile DOC pools that yield non-competitive substrates such as methanol. Our results reveal some of the underlying mechanisms that make PPR wetlands biogeochemical hotspots, which ultimately leads to their critical, but poorly recognized role in regional greenhouse gas emissions.

Environmental Molecular Sciences Laboratory↗

Methane Oxidation to Methanol Catalyzed by Cu-Oxo Clusters Stabilized in NU-1000 Metal–Organic Framework

The catalyzed conversion of shale gas-derived light hydrocarbons, e.g. methane to methanol, for further application as automotive fuels and/or bulk chemicals is especially attractive in light of improved methods of hydrocarbon extraction. MOF based catalysts have previously been demonstrated to be active for a range of catalytic reactions. In this work we used Cu-NU1000 as a methane-to-methanol oxidation catalyst. In addition to product studies, in-situ X-ray Absorption Spectroscopic (XAS) experiments are performed under catalytic conditions in order to follow the modification of the Cu-species and directly probe the structure/activity properties of the Cu-NU1000 system. The insights reported herein serve as a first look at metal-organic framework materials as catalysts for methane oxidation and be the basis for development of the subsequent generations of materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Manufacturing Supply Chain Development for Modular Solar-Thermochemical Conversion Platform - CRADA 387 (Final Report)

Modular chemical process intensification (MCPI) is an emerging field where chemical processing is performed using small-scale modular equipment instead of conventional large centralized chemical plants. Conventional chemical plants benefit from economies of scale that encourage scale-up to ever larger plants. A goal of MCPI is to develop technology that intensifies processing so that equipment can be dramatically smaller and integrated into modular systems. Scale-up occurs by adding more modules in parallel rather than making the equipment larger. A key concept is that equipment and modules can ultimately be cheaper by leveraging economies of mass production, analogous to the automotive industry, in manufacturing the equipment. This project made significant progress toward this outcome by meeting the RAPID institute metric to reduce equipment cost by 20% for each doubling in manufacturing volume. The MCPI application was thermochemical technology that is being commercialized by STARS Technology Corporation, one of the CRADA partners. The technology converts solar and renewable power to chemical energy to produce renewable hydrogen, fuels, and chemicals. The benefit to the public is reduction in greenhouse gases that are contributing to climate change. The project transitioned the steam methane reforming (SMR) reactor from conventional fabrication methods to additive manufacturing (AM) direct metal laser sintering (DMLS) process. This is projected to reduce the cost of making a reactor by 58% when producing 100 reactors per year. Innovations in the DMLS process produced a patented design that reduces reactor weight by 60%. Reductions in material costs and processing time extend the DMLS advantage to higher production volumes. The new design promises to be 38% cheaper than the conventional processes at 1000 units per year. The resulting 87% reduction in the steam methane reforming (SMR) module cost in scaling from current costs meets the RAPID metric. The project was successful in producing and testing the first ever additively manufactured SMR reactors. A reactor achieved over 82% efficiency in converting electric power to chemical energy, which is a world record for an inductively heated SMR. The project has contributed to the design and assembly of a first demonstration plant that is headed to a hydrogen bus filling station in Thousand Palms, CA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hybrid bioinorganic approach to solar-to-chemical conversion

Significance Natural photosynthesis, a process of solar-to-chemical conversion, uses light, water, and carbon dioxide to generate the chemical products needed to sustain life. Here we report a strategy inspired by photosynthesis in which compatible inorganic and biological components are used to transform light, water, and carbon dioxide to the value-added product methane. Specifically, this solar-to-chemical conversion platform interfaces photoactive inorganic materials that produce hydrogen from water and sunlight with microorganisms that consume this sustainably derived hydrogen to drive the transformation of carbon dioxide to methane with high efficiency. This system establishes a starting point for a broader materials biology approach to the synthesis of more complex chemical products from carbon dioxide and water.

Nichols, Eva M.↗

Theoretical insights into the selective oxidation of methane to methanol in copper-exchanged mordenite

Selective oxidation of methane to methanol is one of the most difficult chemical processes to perform. A potential group of catalysts to achieve CH 4 partial oxidation are Cu-exchanged zeolites mimicking the active structure of the enzyme methane monooxygenase. However, the details of this conversion, including the structure of the active site, are still under debate. In this contribution, periodic density functional theory (DFT) methods were employed to explore the molecular features of the selective oxidation of methane to methanol catalyzed by Cu-exchanged mordenite (Cu-MOR). We focused on two types of previously suggested active species, CuOCu and CuOOCu. Our calculations indicate that the formation of CuOCu is more feasible than that of CuOOCu. In addition, a much lower C–H dissociation barrier is located on the former active site, indicating that C–H bond activation is easily achieved with CuOCu. We calculated the energy barriers of all elementary steps for the entire process, including catalyst activation, CH 4 activation, and CH 3 OH desorption. Finally, our calculations are in agreement with experimental observations and present the first theoretical study examining the entire process of selective oxidation of methane to methanol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Room Temperature Electrochemical Upgrading of Methane to Oxygenate Fuels

The overall objective of this project is to discover the nature of the electrochemically active sites and to uncover the mechanisms for the electrocatalytic transformation of small organic molecules to oxygenate products such as methanol, formaldehyde, carbon monoxide and ethylene. Among the feedstocks of interest in this study were: methane, carbon dioxide, and acetic acid. Methane is an incredibly attractive potential feedstock because of the recent discovery of large shale deposits; carbon dioxide is potentially a very available feedstock from carbon capture technologies; acetic acid (as well as CH4 and CO2 and ethanol) has potential as a bio-derived feedstock. This report summarizes the major results to date regarding the electrochemical transformation of CH4, CO2 and acetic acid to chemicals and fuels – with a primary focus on methane. It should be noted that this was a grant that was transferred to the University of South Carolina following the PI’s move from the University of Connecticut. Therefore, this report – as a summary document – contains the results over the entire duration of the project. In addition to the primary objective, the work in this project has led to synergistic discoveries that are advantageous to other fields including: catalyst layer deposition, anion exchange membrane fuel cells, CO2 capture and li-ion batteries. Those are very briefly discussed as well.

03 NATURAL GAS↗

The manufacture of hydrogen from coal

The conversion of coal to hydrogen is studied from the viewpoint of overall plant efficiency for three different processes: suspension gasification, fluidized-bed gasification, and fluidized steam-iron process. The basic principles of these processes are reviewed, and total energy requirements are estimated and complete energy balances are made for each process, on the assumption that each model plant is self-contained, with no power imported. Overall plant efficiencies for conversion of coal to major gaseous products plus by-products were determined to be: suspension gasification - 57.0%, fluidized-bed gasification - 66.4%, fluidized steam-iron process - 62.6%. Similar results are presented for methane liquefaction from coal using a process design based on hydrogasification, and it is found that conversion of coal to pipeline methane is much more efficient and less expensive than hydrogen conversion if a portion of the coal is converted to synthesis gas and this gas is used to hydrogenate more coal to methane.

Tsaros, C. L.↗

Syntrophic Degradation of Lactate in Methanogenic Co-cultures

In environments where the amount of the inorganic electron acceptors (oxygen, nitrate, sulfate, sulfur oroxidized metal ions (Fe3+;Mn4+) is insufficient for complete breakdown of organic matter, methane is formed as the major reduced end product. In such methanogenic environments organic acids are degraded by syntrophic associations of fermenting, acetogenic bacteria (e.g., sulfate-reducing bacteria (SRB) as"secondary fermenters") and methanogenic archaea. In these consortia, the conversion of lactate to acetate, CO2 and methane depends on the cooperating activities of both metabolically distinct microbial groups that are tightly linked by the need to maintain the exchanged metabolites (hydrogenandformate) at very low concentrations.

54 ENVIRONMENTAL SCIENCES↗

Oxidative Hydrophenylation of Ethylene Using a Cationic Ru(II) Catalyst: Styrene Production with Ethylene as the Oxidant

The complex [(MeOTTM)Ru(P(OCH 2 ) 3 CEt)(NCMe)Ph][BAr' 4 ] (MeOTMM = 4,4',4"-(methoxymethanetriyl)-tris(1-benzyl-1H-1,2,3-triazole), BAr' 4 = tetrakis[3,5-bis(trifluoromethyl)phenyl]borate) is used to catalyze the hydrophenylation of ethylene to produce styrene and ethylbenzene. The selectivity of styrene versus ethylbenzene varies as a function of ethylene pressure, and replacing the MeOTTM ligand with tris(1-phenyl-1H-1,2,3-triazol-4-yl)methanol reduces the selectivity toward styrene. For styrene production ethylene serves as the oxidant to produce ethane, as determined by both 1 H NMR spectroscopy and GC-MS. The Ru(III/II) potentials of [(MeOTTM)Ru[P(OCH 2 ) 3 CEt](NCMe)Ph][BAr' 4 ] (0.86 V) and [(HC(pz 5 ) 3 )Ru[P(OCH 2 ) 3 CEt](NCMe)Ph][BAr' 4 ] (0.82 V) (HC(pz 5 ) 3 = tris(5-methyl-pyrazolyl)methane) are nearly identical. Since catalytic conversion of ethylene and benzene by [(HC(pz 5 ) 3 )Ru[P(OCH 2 ) 3 CEt](NCMe)Ph][BAr' 4] is known to selectively produce ethylbenzene, the formation of styrene using [(MeOTTM)Ru[P(OCH 2 ) 3 CEt](NCMe)Ph][BAr' 4 ] is attributed to the substituents on the triazole rings of the MeOTTM ligand.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microwave Plasma-Enhanced and Microwave Heated Chemical Reactions

Microwave plasma technology is revolutionizing reaction engineering fields such as methane dry reforming, chemical synthesis, biomass conversion, and waste treatment. Microwave generated plasma offers sustainable, cleaner and efficient operations compared to conventional methods. Microwave plasma reactions are more efficient when integrated with catalysts. In this article, a thorough categorization and comparison of microwave plasma-assisted catalytic reactions are presented, while highlighting their contribution to an energy efficient and sustainable future in chemical processing. An introduction on commercial applications of microwave plasma technology is also presented to emphasize its advantages in modern industries. Microwave irradiation can be used as a source of heat or plasma. The addition of heterogeneous catalyst to either microwave heated or microwave enhanced plasma systems can lead to complex pathways in reaction systems. Here, a final section in this article is dedicated to comprehend this complexity in chemical reactions occurring in microwave heated and microwave plasma-enhanced catalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct Oxidation of Methane to Methanol Enabled by Electronic Atomic Monolayer–Metal Support Interaction

Direct, catalytic oxidation of methane to methanol (MTM) with molecular oxygen is a highly desirable process to valorize methane. We propose that Rh-doped graphene (GR) supported on Ni(111) can be a promising catalyst for MTM with appreciable activity and selectivity. In the absence of the Ni(111) support, a MTM process is difficult. The catalytic activity of the Rh-doped GR is enabled by the Ni(111) support that covalently binds the Rh-doped GR and significantly modifies its properties, leading to facile O 2 activation by the synergy of the Rh dopant and the neighboring carbon atom of GR. The highly activated O 2 and the Rh dopant in turn activate CH 4 . Strikingly, the methane C–H bond breaking is preferred over methanol C–H bond breaking at 473 K. Here, the strong interaction between TM-doped GR and Ni(111) is found to be a general mechanism for regulating the adsorption strength of various molecules, providing important insight for tuning the properties of single-atom catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic and electrochemical behaviour of solid oxide fuel cell operated with simulated-biogas mixtures

Being produced from organic matters of wastes (bio-wastes) through a fermentation process, biogas mainly composed of CH{sub 4} and CO{sub 2} and can be considered as a secondary energy carrier derived from solar energy. To generate electricity from biogas through the electrochemical process in fuel cells is a state-of-the-art technology possessing higher energy conversion efficiency without harmful emissions compared to combustion process in heat engines. Getting benefits from high operating temperature such as direct internal reforming ability and activation of electrochemical reactions to increase overall system efficiency, solid oxide fuel cell (SOFC) system operated with biogas becomes a promising candidate for distributed power generator for rural applications leading to reductions of environmental issues caused by greenhouse effects and bio-wastes. CO{sub 2} reforming of CH{sub 4} and electrochemical oxidation of the produced syngas (H{sub 2}–CO mixture) are two main reaction processes within porous anode material of SOFC. Here catalytic and electrochemical behavior of Ni-ScSZ (scandia stabilized-zirconia) anode in the feed of CH{sub 4}–CO{sub 2} mixtures as simulated-biogas at 800 °C were evaluated. The results showed that CO{sub 2} had strong influences on both reaction processes. The increase in CO{sub 2} partial pressure resulted in the decrease in anode overvoltage, although open-circuit voltage was dropped. Besides that, the simulation result based on a power-law model for equimolar CH{sub 4}−CO{sub 2} mixture revealed that coking hazard could be suppressed along the fuel flow channel in both open-circuit and closed-circuit conditions.

09 BIOMASS FUELS↗

Hydrogen and Water: An Engineering, Economic and Environmental Analysis

The multi-year program plan for the Department of Energy's Hydrogen and Fuel Cells Technology Program (USDOE, 2007a) calls for the development of system models to determine economic, environmental and cross-cutting impacts of the transition to a hydrogen economy. One component of the hydrogen production and delivery chain is water; water's use and disposal can incur costs and environmental consequences for almost any industrial product. It has become increasingly clear that due to factors such as competing water demands and climate change, the potential for a water-constrained world is real. Thus, any future hydrogen economy will need to be constructed so that any associated water impacts are minimized. This, in turn, requires the analysis and comparison of specific hydrogen production schemes in terms of their water use. Broadly speaking, two types of water are used in hydrogen production: process water and cooling water. In the production plant, process water is used as a direct input for the conversion processes (e.g. steam for Steam Methane Reforming {l_brace}SMR{r_brace}, water for electrolysis). Cooling water, by distinction, is used indirectly to cool related fluids or equipment, and is an important factor in making plant processes efficient and reliable. Hydrogen production further relies on water used indirectly to generate other feedstocks required by a hydrogen plant. This second order indirect water is referred to here as 'embedded' water. For example, electricity production uses significant quantities of water; this 'thermoelectric cooling' contributes significantly to the total water footprint of the hydrogen production chain. A comprehensive systems analysis of the hydrogen economy includes the aggregate of the water intensities from every step in the production chain including direct, indirect, and embedded water. Process and cooling waters have distinct technical quality requirements. Process water, which is typically high purity (limited dissolved solids) is used inside boilers, reactors or electrolyzers because as it changes phase or is consumed, it leaves very little residue behind. Pre-treatment of 'raw' source water to remove impurities not only enables efficient hydrogen production, but also reduces maintenance costs associated with component degradation due to those impurities. Cooling water has lower overall quality specifications, though it is required in larger volumes. Cooling water has distinct quality requirements aimed at preserving the cooling equipment by reducing scaling and fouling from untreated water. At least as important as the quantity, quality and cost of water inputs to a process are the quantity, quality and cost of water discharge. In many parts of the world, contamination from wastewater streams is a far greater threat to water supply than scarcity or drought (Brooks, 2002). Wastewater can be produced during the pre-treatment processes for process and cooling water, and is also sometimes generated during the hydrogen production and cooling operations themselves. Wastewater is, by definition, lower quality than supply water. Municipal wastewater treatment facilities can handle some industrial wastewaters; others must be treated on-site or recycled. Any of these options can incur additional cost and/or complexity. DOE's 'H2A' studies have developed cost and energy intensity estimates for a variety of hydrogen production pathways. These assessments, however, have not focused on the details of water use, treatment and disposal. As a result, relatively coarse consumption numbers have been used to estimate water intensities. The water intensity for hydrogen production ranges between 1.5-40 gallons per kilogram of hydrogen, including the embedded water due to electricity consumption and considering the wide variety of hydrogen production, water treatment, and cooling options. Understanding the consequences of water management choices enables stakeholders to make informed decisions regarding water use. Water is a fundamentally regional commodity. Water resources vary in quality and quantity from region to region, but because of its ubiquity, and because of the enormous volumes in which it is used, there is relatively little long-distance trade in water. As a consequence, water management policies are highly regionalized. Therefore, projecting the water footprint of a given hydrogen facility requires site-specific knowledge of available water resources. Only in the most constrained regions, water may be drawn from remote sources and conveyed long distances by pipeline or aqueduct. Regional water conditions can change over time as fresh and ground water levels change, competing demands become more acute, and shifts in historical climatic patterns take hold. For hydrogen plant stakeholders, a robust development and operating plan would incorporate these regional issues.

08 HYDROGEN↗

Sustainable Transportation Fuels from Coal, Natural Gas (≥ 90% C n H 2n+ 2 gases) and Biomass

This research program is focused primarily on the conversion of coal, natural gas (i.e., methane), and biomass to liquid fuels by Fischer-Tropsch synthesis (FTS), with minimum production of carbon dioxide. A complementary topic also under investigation is the development of novel processes for the production of hydrogen with very low to zero production of CO 2 . This is in response to the nation’s urgent need for a secure and environmentally friendly domestic source of liquid fuels. The carbon neutrality of biomass is beneficial in meeting this goal. Several additional novel approaches to limiting carbon dioxide emissions are also being explored.

10 SYNTHETIC FUELS↗

The reaction Cl + H2CO yields HCl + HCO: Decreased sensitivity of stratospheric ozone to chlorine perturbations

The absolute rate constant for the reaction Cl + H2CO yields HCl + HCO has been determined by the flash-photolysis-resonance fluorescence method to be + or - 0.9 (2 sigma) x 10 to the -11th power cu cm/molecule per sec at 298 K and to have a negligible temperature dependence. This rate, which at stratospheric temperatures is more than 2000 times faster than the rate of Cl + CH4 and more than a factor of 2 faster than Cl + HO2, indicates that formaldehyde (H2CO) will compete significantly with methane (CH4) and HO2 for the conversion of active chlorine in the stratosphere to the inactive reservoir HCl. Chlorine will thus be a less efficient destroyer of stratospheric ozone than previously believed. One-dimensional eddy-diffusion photochemical model calculations indicate that the eventual ozone depletion for a steady-state chlorfluoromethane release at 1975 rates (750,000 tons/year) will be lowered from 20% to 18.5% by the inclusion of this reaction.

Stief, L. J.↗

New Opportunity for Carbon-Supported Ni-based Electrocatalysts: Gas-Phase CO 2 Methanation

The cost-effectiveness and excellent performance of conductive-carbon-supported Ni-based electrocatalysts make them attractive materials for hydrogen oxidation and evolution reactions. However, they were previously unused in gas-phase hydrogenation reactions. In this work, we have expanded the applicability of commercially available advanced Ni/C, NiMo/C and NiRe/C materials from electrocatalysis to heterogeneous catalysis of CO 2 methanation. Our catalytic testing efforts indicate that the monometallic Ni/C material demonstrates the best CO 2 methanation properties, achieving an excellent CO 2 conversion of 83 % at 400 °C with nearly complete selectivity to CH 4 of 99.7 %, plus exhibiting intact performance during 90 h of time-on-stream testing. Such catalytic properties are among the highest reported to date among carbon-supported Ni-based methanation catalysts. Finally, excellent performance of Ni/C stems from the good dispersion of the Ni nanoparticles over N-containing carbon support material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗