Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “layout”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

NASA Lidar system support and MOPA technology demonstration

A series of lidar design and technology demonstration tasks in support of a CO2 lidar program is discussed. The first of these tasks is discussed in Section VI of this report under the heading of NASA Optical Lidar Design and it consists of detailed recommendations for the layout of a CO2 Doppler lidar incorporating then existing NASA optical components and mounts. The second phase of this work consisted of the design, development, and delivery to NASA of a novel acousto-optic laser frequency stabilization system for use with the existing NASA ring laser transmitter. The second major task in this program encompasses the design and experimental demonstration of a master oscillator-power amplifier (MOPA) laser transmitter utilizing a commercially available laser as the amplifier. The MOPA design including the low chirp master oscillator is discussed in detail. Experimental results are given for one, two and three pass amplification. The report includes operating procedures for the MOPA system.

Laughman, L. M.↗
NASA NTRS1985

Static and dynamic high power, space nuclear electric generating systems

Space nuclear electric generating systems concepts have been assessed for their potential in satisfying future spacecraft high power (several megawatt) requirements. Conceptual designs have been prepared for reactor power systems using the most promising static (thermionic) and the most promising dynamic conversion processes. Component and system layouts, along with system mass and envelope requirements have been made. Key development problems have been identified and the impact of the conversion process selection upon thermal management and upon system and vehicle configuration is addressed.

Wetch, J. R.↗
NASA NTRS1985

Hardening of commercial CMOS PROMs with polysilicon fusible links

The method by which a commercial 4K CMOS PROM with polysilicon fuses was hardened and the feasibility of applying this method to a 16K PROM are presented. A description of the process and the necessary minor modifications to the original layout are given. The PROM circuit and discrete device characteristics over radiation to 1000K rad-Si are summarized. The dose rate sensitivity of the 4K PROMs is also presented.

Newman, W. H.↗
NASA NTRS1985

Head-up display (HUD) utility. II - Runway to HUD transitions monitoring eye focus and decision times

An experiment conducted using a head-up display (HUD) suggests that the demonstrated superiority of the HUD over a conventional instrument panel stems from its superior layout of information. A HUD display presents instrument-panel information to pilots in such a way that the symbols appear as a virtual image at optical infinity superimposed on the landscape. In the experiment conducted, the luminance of the display symbology and its angle subtended at the eye remained fixed, while optical distance and gaze angle were varied. Concomitant measures of eye movements, eye accommodative state, and decision-making time concerning airspeed, altitude and runway condition were obtained. It is found that, while looking straight ahead, at zero diopters, the HUD shortens decision time by 80 to 90 msec, not statistically significant at the 0.05 (slope of diopter/gaze interaction) level. The question of a cognitive overload induced by the luminous symbols of the HUD is subsequently addressed.

Weintraub, D. J.↗
NASA NTRS1985

Effects of stratospheric lapse rate on numerically simulated thunderstorm cloud top structure

The study of overshooting midlatitude severe thunderstorm tops has led to the detection of some intriguing patterns. This paper provides a summary of an investigation of the effects of stratospheric stability on thunderstorm cloud top structure, taking into account the utilization of a fully three-dimensional (3D) anelastic model discussed by Schlesinger (1975, 1978, 1984). The layout of model experiments is discussed, giving attention to initial environmental soundings, and initial forcing. The time variation of the vertical velocity extreme is examined, and a description of the mature storm structure is presented. Constant-altitude plane views throughout storm depth are considered along with cloud top height fields. With the stratospheric lapse, the warm region is small and breaks down into separate spots with secondary cold spots downshear of them.

Schlesinger, R. E.↗
NASA NTRS1987

Bonded-Plate Airfoil Construction

Airfoil design for testing in 0.3-m Transonic Cryogenic Tunnel was symmetrical supercritical shape, consistent with flat-bond-plane bonding-and-channeling technology that had been developed. Technique offers greatly increased flexibility in orifice and pressure-channel layout.

Lawing, Pierce L.↗
NASA NTRS1987

Space-Subdivision Algorithm for Abstract Trajectories

Computational overhead in testing links between nodes reduced. Computationally efficient algorithm facilitates subdivision of n-dimensional spaces during selection, testing, or optimization of trajectories in those spaces. Reduces cost of computation in such diverse problems as scheduling of interrelated events to avoid conflicts, devising efficient production-line layouts and operating schedules, routing telephone calls, and analyzing the motions of gas particles.

Lyon, Douglas K.↗
NASA NTRS1984

Structural Optimization in automotive design

Although mathematical structural optimization has been an active research area for twenty years, there has been relatively little penetration into the design process. Experience indicates that often this is due to the traditional layout-analysis design process. In many cases, optimization efforts have been outgrowths of analysis groups which are themselves appendages to the traditional design process. As a result, optimization is often introduced into the design process too late to have a significant effect because many potential design variables have already been fixed. A series of examples are given to indicate how structural optimization has been effectively integrated into the design process.

Bennett, J. A.↗
NASA NTRS1985

Design and analysis study of a spacecraft optical transceiver package

A detailed system level design of an Optical Transceiver Package (OPTRANSPAC) for a deep space vehicle whose mission is outer planet exploration is developed. In addition to the terminal design, this study provides estimates of the dynamic environments to be encountered by the transceiver throughout its mission life. Optical communication link analysis, optical thin lens design, electronic functional design and mechanical layout and packaging are employed in the terminal design. Results of the study describe an Optical Transceiver Package capable of communicating to an Earth Orbiting Relay Station at a distance of 10 Astronomical Units (AU) and data rates up to 100 KBPS. The transceiver is also capable of receiving 1 KBPS of command data from the Earth Relay. The physical dimensions of the terminal are contained within a 3.5' x 1.5' x 2.0' envelope and the transceiver weight and power are estimated at 52.2 Kg (115 pounds) and 57 watts, respectively.

Lambert, S. G.↗
NASA NTRS1986

A design study of hydrazine and biowaste resistojets

A generalized modeling program was adapted in BASIC on a personal computer to compare the performance of four types of biowaste resistojets and two types of hydrazine augmenters. Analyzed biowaste design types were: (1) an electrically conductive ceramic heater-exchanger of zirconia; (2) a truss heater of platinum in cross flow; (3) an immersed bicoiled tubular heater-exchanger; and (4) a nonexposed, refractory metal, radiant heater in a central cavity within a heat exchanger case. Concepts 2 and 3 are designed to have an efficient, stainless steel outer pressure case. The hydrazine design types are: (5) an immersed bicoil heater exchanger and (6) a nonexposed radiant heater now with a refractory metal case. The ceramic biowaste resistojet has the highest specific impulse growth potential at 2000 K of 192.5 (CO2) and 269 s (H2O). The bicoil produces the highest augmenter temperature of 1994 K for a 2073 K heater giving 317 s at .73 overall efficiency. Detailed temperature profiles of each of the designs are shown. The scaled layout drawings of each are presented with recommended materials and fabrication methods.

Page, R. J.↗
NASA NTRS1987

Development of an LED display system for cross-track distance and velocity for Loran-C flight

The methodology for estimating cross-track velocity by combining rate-gyro and Loran-C data is illustrated in block diagrams. At present, preliminary analysis has established values for K sub 1, K sub 2, the parameters of the digital control loops. A computer program was written to implement a digital simulation of the system as illustrated. Given a model for the noise in the rate-gyro and Loran-C receiver, and their dynamic response, the simulation provides a working model to establish good control loop parameters. The layout of the LED display for flight testing of Loran-C approach flying, which was constructed during a visit to Langley Research Center, is shown. Four bar-graph LED displays are paired to provide cross-track distance and velocity from a Loran-C defined runway centerline. Two seven-segment LED displays are used to provide alphanumeric readout of range to touchdown and desired height. A metal case was built, a circuit board designed, and manufactured with the assistance of NASA Langley personnel.

Dogan, Norry↗
NASA NTRS1987

Loran-C approach guidance project current status

There are four areas of work in the Loran-C flight test project. Current results provide performance data on the effects of Signal Noise Ratio (SNR) on the dynamic performance of the receiver filters for Loran-C data, and data on Loran-C grid deformation at a microscale of 100 meters. The Loran-C receiver provides a line of position (LOP) Master and Slave transmitter at an angle 0 to magnetic north. No transformation to latitude-longitude reference frame is required since this is the major source of Loran-C navigation errors. A local coordinate frame is established centered at touchdown point on the runway with directions along and across the runway. A Loran-C data collection system was set up. The Loran-C data are sent directly to an Apple II computer with a 12 inch monitor. The effect of SNR on Loran-C precision is shown for two receiver filters of different frequency response. A set of ground level static readings of touchdown was taken around Hanscom Field and transferred to an accurate detailed layout drawing; this showed local distortions of the average touchdown values.

Elias, A. L.↗
NASA NTRS1987

Multipurpose microcontroller design for PUGAS 2

This paper will report on the past year's work on the development of the microcontroller design for the second Purdue University small self-contained payload. A first report on this effort was given at last year's conference by Ritter (1985). At that time, the project was still at the conceptual stage. Now a specific design has been set, prototyping has begun, and layout of the two-sided circuit board using CAD-techniques is nearing completion. A redesign of the overall concept of the circuit board was done to take advantage of the facilities available to students. An additional controller has been added to take large quantities of data concerning the shuttle environment during takeoff. The importance of setting a design time-line is discussed along with the electrical design considerations given to the controllers.

Weber, David M.↗
NASA NTRS1986

SOT: A rapid prototype using TAE windows

The development of the window interface extension feature of the Transportable Applications Executive (TAE) is discussed. This feature is being used to prototype a space station payload interface in order to demonstrate and assess the benefits of using windows on a bit mapped display and also to convey the concept of telescience, the control and operation of space station payloads from remote sites. The prototype version of the TAE with windows operates on a DEC VAXstation 100. This workstation has a high resolution 19 inch bit mapped display, a keyboard and a three-button mouse. The VAXstation 100 is not a stand-alone workstation, but is controlled by software executing on a VAX/8600. A short scenario was developed utilizing the Solar Optical Telescope (SOT) as an example payload. In the scenario the end-user station includes the VAXstation 100 plus an image analysis terminal used to display the CCD images. The layout and use of the prototype elements, i.e., the root menu, payload status window, and target acquisition menu is described.

Stephens, Mark↗
NASA NTRS1987

Parallel VLSI architecture emulation and the organization of APSA/MPP

The Applicative Programming System Architecture (APSA) combines an applicative language interpreter with a novel parallel computer architecture that is well suited for Very Large Scale Integration (VLSI) implementation. The Massively Parallel Processor (MPP) can simulate VLSI circuits by allocating one processing element in its square array to an area on a square VLSI chip. As long as there are not too many long data paths, the MPP can simulate a VLSI clock cycle very rapidly. The APSA circuit contains a binary tree with a few long paths and many short ones. A skewed H-tree layout allows every processing element to simulate a leaf cell and up to four tree nodes, with no loss in parallelism. Emulation of a key APSA algorithm on the MPP resulted in performance 16,000 times faster than a Vax. This speed will make it possible for the APSA language interpreter to run fast enough to support research in parallel list processing algorithms.

Odonnell, John T.↗
NASA NTRS1987

Reconfigurable tree architectures using subtree oriented fault tolerance

An approach to the design of reconfigurable tree architecture is presented in which spare processors are allocated at the leaves. The approach is unique in that spares are associated with subtrees and sharing of spares between these subtrees can occur. The Subtree Oriented Fault Tolerance (SOFT) approach is more reliable than previous approaches capable of tolerating link and switch failures for both single chip and multichip tree implementations while reducing redundancy in terms of both spare processors and links. VLSI layout is 0(n) for binary trees and is directly extensible to N-ary trees and fault tolerance through performance degradation.

Lowrie, Matthew B.↗
NASA NTRS1986

Design and performance of 4 x 5120-element visible and 2 x 2560-element shortwave infrared multispectral focal planes

Two solid-state sensors for use in remote sensing instruments operating in the pushbroom mode are examined. The design and characteristics of the visible/near-infrared (VIS/NIR) device and the short-wavelength infrared (SWIR) device are described. The VIS/NIR is a CCD imager with four parallel sensor lines, each 1024 pixel long; the chip design and filter system of the VIS/NIR are studied. The performance of the VIS/NIR sensor with mask and its system performance are measured. The SWIR is a dual-band line imager consisting of palladium silicide Schottky-barrier detectors coupled to CCD multiplexers; the performance of the device is analyzed. The substrate materials and layout designs used to assemble the 4 x 5120-element VIS/NIR array and the 2 x 2560-element SWIR array are discussed, and the planarity of the butted arrays are verified using a profilometer. The optical and electrical characteristics, and the placement and butting accuracy of the arrays are evaluated. It is noted that the arrays met or exceed their expected performance.

Tower, J. R.↗
NASA NTRS1986

Feasibility assessment of the Get-Away Tether Experiment

The small free-flying tether system deployable from a Get-Away Special canister is analyzed. The objectives of the GAS experiment which include demonstrating electric power generation and orbital reboost using electrodynamic technology, measuring micrometeoroid hazards to the tethers, conducting a radio propagation experiment, and measuring long wire radar-cross-section are discussed. The physical layout and components of the mother and daughter satellites are described. The command and control system of the tether system is examined. The electrodynamic experiments to be conducted after plasma contact is established and the electrodynamical capabilities of the system are considered.

Greene, M.↗