Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lateral”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Charge regulation mechanism in end-tethered weak polyampholytes

Weak polyampholytes, containing oppositely charged dissociable groups, are expected to be responsive to changes in ionic conditions. Here, we determine structural and thermodynamic properties, including the charged groups’ degrees of dissociation, of end-tethered weak polyampholyte layers as a function of salt concentration, pH, and the solvent quality. For diblock weak polyampholytes grafted by their acidic blocks, we find that the acidic monomers increase their charge while the basic monomers decrease their charge with decreasing salt concentration for pH values less than the pK a value of both monomers and vice versa when the pH > pK a . This complex charge regulation occurs because the electrostatic attraction between oppositely charged blocks is stronger than the repulsion between monomers with the same charge in both good and poor solvents when the screening by salt ions is weak. This is shown by the retraction of the top block into the bottom layer. In the case of poor solvent conditions to the basic block (the top block), we find lateral segregation of basic monomers into micelles, forming a two-dimensional hexagonal pattern on the surface at intermediate and high pH values for monovalent salt concentrations from 0.01 to 0.1 M. When the solvent is poor to both blocks, we find lateral segregation of the grafted acidic block into lamellae with longitudinal undulations of low and high acidic monomer density. By exploiting weak block polyampholytes, our work expands the parameter space for creating responsive surfaces stable over a wide range of pH and salt concentration.

36 MATERIALS SCIENCE↗
DOE OSTI2021

SN 2018ijp: the explosion of a stripped-envelope star within a dense H-rich shell?

In this work, we discuss the outcomes of the follow-up campaign of SN 2018ijp, discovered as part of the Zwicky Transient Facility survey for optical transients. Its first spectrum shows similarities to broad-lined Type Ic supernovae around maximum light, whereas later spectra display strong signatures of interaction between rapidly expanding ejecta and a dense H-rich circumstellar medium, coinciding with a second peak in the photometric evolution of the transient. This evolution, along with the results of modeling of the first light-curve peak, suggests a scenario where a stripped star exploded within a dense circumstellar medium. The two main phases in the evolution of the transient could be interpreted as a first phase dominated by radioactive decays, and a later interaction-dominated phase where the ejecta collide with a pre-existing shell. We therefore discuss SN 2018jp within the context of a massive star depleted of its outer layers exploding within a dense H-rich circumstellar medium.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

A real-time search for Type Ia Supernovae with late-time interactions with circumstellar material in ZTF data

While it is generally accepted that Type Ia supernovae (SNe Ia) are the terminal explosions of white dwarfs (WDs), the nature of their progenitor systems and the mechanisms that lead up to these explosions remain widely debated. In rare cases, the SN ejecta interact with circumstellar material (CSM) that had previously been ejected from the progenitor system. The longer the delay between the creation of the CSM and the SN explosion, the greater the distance between the SN explosion site and the CSM and the later the onset of the interaction. The unknown distance between the CSM and SN explosion site makes it impossible to predict when the interaction will start. If the time between the SN explosion and the onset of the CSM interaction is of the order of several months to years, the SN has generally faded and it is no longer actively followed up on. This makes it even more difficult to detect the interaction while it is happening. In this work, we report on a real-time monitoring programme running between 13 November 2023 and 9 July 2024. It monitored 6914 SNe Ia for signs of late-time rebrightening using the Zwicky Transient Facility (ZTF). Flagged candidates were rapidly followed up on with photometry and spectroscopy to confirm the late-time excess and its position. We report the discovery of a ∼50 day rebrightening event in SN 2020qxz around 1200 rest-frame days after the peak of its light curve. SN 2020qxz exhibited signs of an early CSM interaction, but had faded from view over two years before its reappearance. Initial follow-up spectroscopy revealed the presence of four emission lines, while later follow-up spectroscopy showed that these had faded shortly after the end of the ZTF-detected rebrightening event. Our best match for these emission lines are H β (blueshifted by ∼5900 km s −1 ) and Ca II λ8542 , N I λ8567 , and K I λλ8763, 8767 (all blueshifted by 5100 km s −1 ; although we note that the line identifications are uncertain). This shows that catching and following up on late-time interactions as they occur can offer new clues on the nature of the progenitor systems that produce these SNe by putting constraints on the possible type of donor star. The only way to do this systematically is to use large sky surveys such as ZTF and the upcoming Vera C. Rubin Observatory’s Legacy Survey of Space and Time (LSST) to monitor a large sample of objects for the rare events that reappear long after the object has faded from view.

circumstellar matter↗
DOE OSTI2019

Plume dynamics and gas-phase molecular formation in transient laser-produced uranium plasmas

The dynamics of expansion, thermodynamics, and chemical reactions in laser-produced plasmas is of general interest for all laser ablation applications. This study investigates the complex morphology and behavior of reactive species in nanosecond laser-produced uranium plasmas. Comparing plasma morphology in various inert and reactive ambient gases provides information about the role of gas-phase chemistry in plume hydrodynamics. Background gases including nitrogen and argon foster collisional interactions leading to more significant plume confinement and the increase in persistence of uranium species. On the other hand, environments containing reactive gases such as oxygen promote chemical reactions between the plasma and ambient species. By comparing the expansion dynamics of uranium plumes in nitrogen, air, and argon, we discover that chemical reactions modify the hydrodynamics of the plume at later times of its evolution in the air background. Furthermore, we observe that varying the concentration of oxygen in the fill gas promotes different reaction pathways that lead to the formation of uranium oxides. The reaction pathways from atoms to diatomic to polyatomic molecules strongly vary with ambient oxygen concentration. Lower oxygen concentrations enhance the formation of uranium monoxide from atomic uranium, whereas higher oxygen concentrations tend to depopulate both atomic uranium and uranium monoxide concentrations through the formation of more complex uranium oxides.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

In situ and selective area etching of GaN by tertiarybutylchloride (TBCl)

In situ etching (ISE) of gallium nitride (GaN) can enable lateral and vertical junctions through selective area etching (SAE) and regrowth. We report the study of ISE and SAE of GaN using an organometallic precursor, tertiarybutylchloride (TBCl), in a metal-organic chemical vapor deposition reactor. Compared to the conventional etching in hydrogen, the use of TBCl allows in situ etching at a much lower temperature (<850 °C), likely due to a more reactive etchant and a more efficient desorption rate of the etching products. The TBCl etching is near equilibrium and can be significantly changed with the change of the NH3 flow rate. We also report initial results of SAE on SiO 2 patterned GaN samples. An important finding is the need to control the desorption of the reaction products in order to achieve smooth surfaces. TBCl etching is crystallographically anisotropic with low etch rates on N-terminated facets. The use of TBCl and possibly other organometallic halogen precursors is expected to enable the design and implementation of III-nitride lateral junction devices that have not been possible.

42 ENGINEERING↗
DOE OSTI2020

Area and thickness dependence of Auger recombination in nanoplatelets

The ability to control both the thickness and the lateral dimensions of colloidal nanoplatelets offers a test-bed for area and thickness dependent properties in 2D materials. An important example is Auger recombination, which is typically the dominant process by which multiexcitons decay in nanoplatelets. In this report, we uncover fundamental properties of biexciton decay in nanoplatelets by comparing the Auger recombination lifetimes based on interacting and noninteracting formalisms with measurements based on transient absorption spectroscopy. Specifically, we report that electron-hole correlations in the initial biexcitonic state must be included in order to obtain Auger recombination lifetimes in agreement with experimental measurements and that Auger recombination lifetimes depend nearly linearly on the lateral area and somewhat more strongly on the thickness of the nanoplatelet. We also connect these scalings to those of the area and thickness dependencies of single exciton radiative recombination lifetimes, exciton coherence areas, and exciton Bohr radii in these quasi-2D materials.

2D materials↗
DOE OSTI2020

Metal-ion-controlled growth and nanoindentation response of 3D, bicontinuous Cu–Fe thin films

Bicontinuous, nanocomposite thin film morphologies depend largely on the deposition conditions applied during physical vapor deposition. With the introduction of high power impulse magnetron sputtering (HiPIMS), the range of potential morphologies achieved during deposition has been increased. In this work, we compare the deposition outcomes between traditional direct-current magnetron sputtering (DCMS) and HiPIMS for a thin film co deposit of Cu and Fe. Modular control of the columnarity, porosity and roughness was achieved by varying the Cu and Fe metal ion currents during deposition. The directionality of the nanostructured phase-separated morphology was also controlled as the ion current increased. At zero ion current for both Cu and Fe sputtered species during DCMS, the film exhibited lateral concentration modulations of Cu and Fe. The directionality of the Cu- and Fe-rich phases shifted to vertical concentration modulations at low ion currents of I Fe = 1A and I Cu = 0:1A and to lateral concentration modulations at relatively moderate ion currents of I Fe = 5A and I Cu = 2A: At high ion currents of I Fe = 18A and I Cu = 2A; a more randomized phase domain structure was observed on the nanoscale. This structural shift is rationalized using an interdiffusion model. Here, the role of different kinds of phase separated morphologies, achieved during DCMS deposition, on the mechanical properties has also been studied. Results indicated increase in hardness, indentation modulus and flow strength values with the increase in indentation strain rates. Bicontinuous Cu-Fe nanocomposites are found to be stronger than multilayer Cu-Fe samples.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Structures of glasses created by multiple kinetic arrests

X-ray scattering has been used to characterize glassy itraconazole (ITZ) prepared by cooling at different rates. Faster cooling produces ITZ glasses with lower (or zero) smectic order with more sinusoidal density modulation, larger molecular spacing, and shorter lateral correlation between the rod-like molecules. We find that each glass is characterized by not one, but two fictive temperatures T f (the temperature at which a chosen order parameter is frozen in the equilibrium liquid). The higher T f is associated with the regularity of smectic layers and lateral packing, while the lower T f with the molecular spacings between and within smectic layers. This indicates that different structural features are frozen on different timescales. The two timescales for ITZ correspond to its two relaxation modes observed by dielectric spectroscopy: the slower δ mode (end-over-end rotation) is associated with the freezing of the regularity of molecular packing and the faster α mode (rotation about the long axis) with the freezing of the spacing between molecules. Finally, our finding suggests a way to selectively control the structural features of glasses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Origins of epitaxial macro-terraces and macro-steps on GaN substrates

Localized lattice distortions in GaN substrates can serve as nucleation sites for epitaxial macro-steps and macro-terraces. These detrimental macro-scale features give rise to optically hazy homoepitaxial GaN surfaces. After nucleating, these macro-features grow laterally along the surface and coalesce, leading to significant coverage of the wafer surface. Dot-core GaN substrates consisting of a periodic array of cores were used as a defect-engineered system, where dislocations are intentionally concentrated at the cores. The high density of threading dislocations at the cores induced localized lattice distortions. Here, these distortions are associated predominantly with lattice tilt on the order of hundreds of arcsec across ~0.5 mm laterally along the wafer surface. The resulting macro-features that nucleated at these localized distorted sites were made up of macro-terraces with lengths ranging ~30–~150 μm and macro-step heights ranging ~200–~400 nm. Another source of localized distortion was threading screw dislocations or GaN nanopipes that resulted in spiral growth and hillock formation. Based on x-ray topography and optical microscopy measurements, we speculate that the coalescence of hillocks evolves into macro-terraces and macro-steps. While previous studies focused on the substrate miscut as a means to control macro-feature formation, we show that localized lattice tilt from defects is another important contributor to macro-feature formation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Analysis of single-mode Richtmyer–Meshkov instability using high-order incompressible vorticity-streamfunction and shock-capturing simulations

In this study, two- and three-dimensional simulation results obtained using a new high-order incompressible, variable-density vorticity–streamfunction (VS) method and data from previous ninth-order weighted essentially nonoscillatory (WENO) shock-capturing simulations are used to investigate the nonlinear dynamics of single-mode Richtmyer–Meshkov instability using a model of a Mach 1.3 air(acetone)/SF6 shock tube experiment. A comparison of the density fields from both simulations with the experimental images demonstrates very good agreement in the large-scale structure with both methods but differences in the small-scale structure. The WENO method captures the small-scale disordered structure observed in the experiment, while the VS method partially captures such structure and yields a strong rotating core. The perturbation amplitude growth from the simulations generally agrees well with the experiment. The simulation bubble and spike amplitudes agree well at early times. At later times, the WENO bubble amplitude is smaller than the VS amplitude and vice versa for the spike amplitude. The predictions of nonlinear single-mode instability growth models are shown to agree with the simulation amplitudes at early-to-intermediate times but underpredict the amplitudes at later times in the nonlinear regime. Visualizations of the mass fraction and enstrophy isosurfaces, velocity and vorticity fields, and baroclinic vorticity production and vortex stretching terms from the three-dimensional simulations indicate that, with the exception of the small-scale structure within the rollups, the VS and WENO results are in good agreement.

42 ENGINEERING↗
DOE OSTI2024

Nonplanar effects in simulations of laser-driven ejecta microjet experiments

Recent experiments of laser-driven ejecta microjets performed at OMEGA 60 reveal tortuous jets whereby the jets appear to deviate from their initial trajectory as they travel in vacuum. To understand these data, we perform two dimensional numerical simulations, considering different target thicknesses, pressures, and models of the drive conditions. In particular, modeling the finite laser spot size appears essential in reproducing qualitatively the non-planar shock observed in the experiment. Simulations capture jet deflection by accounting for a slight misalignment of the laser pointing with respect to the groove axis along with spatial variation of the laser pulse intensity. The principal physical mechanism appears to be that lateral momentum is imparted by release waves arising from the non-planar drive. The induced off-axis velocity is small in comparison to the jet axial velocity but integrates into a pronounced deflection over the course of the experiment. The analysis of jet axial and lateral mass distributions is found to be reproduced reasonably by the simulations. Simulated radiographs are in qualitative agreement with the experiments, though their differences point to potential shortcomings in modeling strictly three-dimensional experiments using two-dimensional hydrodynamic simulations. The simple analysis is able to explain part of the observed discrepancy in simulated vs experimental jet masses.

42 ENGINEERING↗
DOE OSTI2024

Planarization of p -GaN surfaces on MOCVD grown V-defect engineered GaN-based LEDs

The large polarization barriers between the quantum wells and quantum barriers in long-wavelength GaN-based light-emitting diodes (LEDs) inhibit their performance by requiring excess driving voltages to reach standard operating current densities. Lateral injection of carriers directly into quantum wells is required to circumvent this issue. V-defects are naturally occurring inverted hexagonal defects with semipolar {$10\bar{1}1$}-plane sidewalls generated on surface depressions from threading dislocations. LEDs engineered to intentionally generate V-defects below the active region of the LED can achieve lateral carrier injection through the V-defect sidewalls and have already been able to demonstrate world record wall-plug efficiencies for LEDs in the green-red wavelengths. V-defects can be enlarged during kinetically limited growth where the growth rate of the c-plane GaN is faster than that of their sidewalls, leaving them unfilled. We report on the metal organic chemical vapor deposition growth conditions required to fill in V-defects with p-GaN during epitaxial growth of the LED post the active region. Circular transmission length measurements of Pd/Au contacts processed on p-GaN surfaces with various amounts of unfilled V-defects showed no significant difference in their sheet resistance and specific contact resistance. J–V measurements of LEDs grown with varying unfilled V-defect densities showed no significant difference in the forward bias regime. However, in the reverse bias regime, catastrophic breakdown occurred at markedly lower voltages for samples with larger unfilled V-defect densities. This suggests that unfilled V-defects may act as hotspots for device failure, and planarizing LED surfaces may help prevent early degradation of LED devices.

Chemical vapor deposition↗
DOE OSTI2024

Dislocation half-loop control for optimal V-defect density in GaN-based light emitting diodes

V-defects are morphological defects that typically form on threading dislocations during epitaxial growth of $(0001)$-oriented GaN layers. A V-defect is a hexagonal pyramid-shaped depression with six {$10\bar{1}1$}-oriented sidewalls. These semipolar sidewalls have a lower polarization barrier than the polarization barriers present between the polar c-plane quantum wells and quantum barriers and can laterally inject carriers directly into quantum wells in GaN-based light emitting diodes (LEDs). This is especially important, as the high polarization field in c-plane GaN is a significant factor in the high forward voltage of GaN LEDs. The optimal V-defect density for efficient lateral carrier injection in a GaN LED (∼10 9 cm −2 ) is typically an order of magnitude higher than the threading dislocation density of GaN grown on patterned sapphire substrates (∼10 8 cm −2 ). Pure-edge dislocation loops have been known to exist in GaN, and their formation into large V-defects via low-temperature growth with high Si-doping has recently been studied. Here, in this work, we develop a method for pure-edge threading dislocation half-loop formation and density control via disilane flow, growth temperature, and thickness of the half-loop generation layer. We also develop a method of forming the threading dislocation half-loops into V-defects of comparable size to those originating from substrate threading dislocations.

Crystallographic defects↗
DOE OSTI2024

Light scattering by V 4 O 7 film across the metal–insulator transition

The experimental study of the angle-resolved hemispherical light scattering by V 4 O 7 film within a broad temperature range across metal–insulator transition reveals complex structural reorganization of the film deposited on the c-cut sapphire crystal. The bidirectional scattering distribution function and the surface autocorrelation function were obtained from scattering data to visualize statistics of the spatially resolved contributions of optical inhomogeneities in normal and lateral directions to the surface. The measurements reveal an anisotropic surface roughness distribution due to the twinned domain structure, with significant anisotropy changes across the phase transition. The V 4 O 7 film deposited on sapphire leads to a polydomain structure, minimizing elastic strain energy with distinct multiscale distributions of surface domains. Near T c , the material shows the lowest roughness but the highest lateral disorder of the surface.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Properties of V-defect injectors in long wavelength GaN LEDs studied by near-field electro- and photoluminescence

The efficiency of multiple quantum well (QW) light emitting diodes (LEDs) to a large degree depends on uniformity of hole distribution between the QWs. Typically, transport between the QWs takes place via carrier capture into and thermionic emission out of the QWs. In InGaN/GaN QWs, the thermionic hole transport is hindered by the high quantum confinement and polarization barriers. To overcome this drawback, hole injection through semipolar QWs located at sidewalls of V-defects had been proposed. However, in the case of the V-defect injection, strong lateral emission variations take place. In this work, we explore the nature of these variations and the impact of the V-defects on the emission spectra and carrier dynamics. The study was performed by mapping electroluminescence (EL) and photoluminescence (PL) with a scanning near-field optical microscope in LEDs that contain a deeper well that can only be populated by holes through the V-defects. Applying different excitation schemes (electrical injection and optical excitation in the far- and near-field), we have shown that the EL intensity variations are caused by the lateral nonuniformity of the hole injection. We have also found that, in biased structures, the PL intensity and decay time in the V-defect regions are only moderately lower that in the V-defect-free regions thus showing no evidence of an efficient Shockley-–Read–Hall recombination. In the V-defect regions, the emission spectra experience a red shift and increased broadening, which suggests an increase of the In content and well width in the polar QWs close to the V-defects.

Electroluminescence↗
DOE OSTI2019

Ambidextrous Helical Nanotubes from Self-Assembly of Designed Helical Hairpin Motifs

Tandem repeat proteins exhibit native designability and represent potentially useful scaffolds for the construction of synthetic biomimetic assemblies. We have designed two synthetic peptides, HEAT R1 and LRV M3Δ1, based on the consensus sequences of single repeats of thermophilic HEAT (PBS HEAT) and Leucine- Rich Variant (LRV) structural motifs, respectively. Self-assembly of the peptides afforded high aspect-ratio helical helical nanotubes. Cryo-electron microscopy with direct electron detection was employed to analyze the structures of the solvated filaments. Three dimensional reconstructions from the cryo-EM maps led to atomic models for the HEAT R1 and LRV M3Δ1 filaments at resolutions of 6.0 Å and 4.4 Å, respectively. Surprisingly, despite sequence similarity at the lateral packing interface, HEAT R1 and LRV M3Δ1 filaments adopt the opposite helical hand and differ significantly in helical geometry, while retaining a local conformation similar to previously characterized repeat proteins of the same class. The differences in the two filaments could be rationalized on the basis of differences in cohesive interactions at the lateral and axial interfaces. These structural data reinforce previous observations regarding the structural plasticity of helical protein assemblies and the need for high resolution structural analysis. Despite these observations, the native designability of tandem repeat proteins offers the opportunity to engineer novel helical nanotubes. Furthermore, the resultant nanotubes have independently addressable and chemically distinguishable interior and exterior surfaces that would facilitate applications in selective recognition, transport, and release.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Functional lipid pairs as building blocks of phase-separated membranes

Biological membranes exhibit a great deal of compositional and phase heterogeneity due to hundreds of chemically distinct components. As a result, phase separation processes in cell membranes are extremely difficult to study, especially at the molecular level. It is currently believed that the lateral membrane heterogeneity and the formation of domains, or rafts, are driven by lipid–lipid and lipid–protein interactions. Nevertheless, the underlying mechanisms regulating membrane heterogeneity remain poorly understood. In the present work, we combine inelastic X-ray scattering with molecular dynamics simulations to provide direct evidence for the existence of strongly coupled transient lipid pairs. These lipid pairs manifest themselves experimentally through optical vibrational (a.k.a. phononic) modes observed in binary (1,2-dipalmitoyl- sn -glycero-3-phosphocholine [DPPC]–cholesterol) and ternary (DPPC–1,2-dioleoyl- sn -glycero-3-phosphocholine/1-palmitoyl-2-oleoyl-glycero-3-phosphocholine [DOPC/POPC]–cholesterol) systems. The existence of a phononic gap in these vibrational modes is a direct result of the finite size of patches formed by these lipid pairs. The observation of lipid pairs provides a spatial (subnanometer) and temporal (subnanosecond) window into the lipid–lipid interactions in complex mixtures of saturated/unsaturated lipids and cholesterol. Our findings represent a step toward understanding the lateral organization and dynamics of membrane domains using a well-validated probe with a high spatial and temporal resolution.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Constraining the oxygen requirements for modern microbial eukaryote diversity

Eukaryotes originated prior to the establishment of modern marine oxygen (O 2 ) levels. According to the body fossil and lipid biomarker records, modern (crown) microbial eukaryote lineages began diversifying in the ocean no later than ~800 Ma. While it has long been predicted that increasing atmospheric O 2 levels facilitated the early diversification of microbial eukaryotes, the O 2 levels needed to permit this diversification remain unconstrained. Using time-resolved geochemical parameter and gene sequence information from a model marine oxygen minimum zone spanning a range of dissolved O 2 levels and redox states, we show that microbial eukaryote taxonomic richness and phylogenetic diversity remain the same until O 2 declines to around 2 to 3% of present atmospheric levels, below which these diversity metrics become significantly reduced. Our observations suggest that increasing O 2 would have only directly promoted early crown-eukaryote diversity if atmospheric O 2 was below 2 to 3% of modern levels when crown-eukaryotes originated and then later met or surpassed this range as crown-eukaryotes diversified. If atmospheric O 2 was already consistently at or above 2 to 3% of modern levels by the time that crown-eukaryotes originated, then the subsequent diversification of modern microbial eukaryotes was not directly driven by atmospheric oxygenation.

59 BASIC BIOLOGICAL SCIENCES↗