Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “k mean”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

The temperature dependence of the rate constant for the reaction of hydroxyl radicals with nitric acid

The rate constant for the reaction of hydroxyl radicals with nitric acid in the 225-443 K temperature range has been measured by means of the flash photolysis resonance fluorescence technique. Above 300 K, the rate constant levels off in a way that can only be explained by the occurrence of two reaction channels, of which one, operative at low temperatures, proceeds through the formation of an adduct intermediate. The implications of these rate constant values for stratospheric reaction constants is discussed.

Kurylo, M. J.↗
NASA NTRS1973

K alpha line emission during solar X-ray bursts

Calculations of K alpha line emission from S, Ar, Ca and Fe are presented. It is reported that on the basis of data for hard X-ray bursts, the flux during most impulsive, non-thermal events is likely to be weak, though for a few strong bursts, a flux of approximately 100 photons/cm/s may be expected. The amount of S K alpha emission particularly is sensitively dependent on the value of the lower energy bound of the non-thermal electron distribution, offering a possible means of determining this. Thermal K alpha emission is only significant for Fe ions. The calculated thermal K alpha radiation is much less than that observed during an intense soft X-ray burst. It is concluded that a detailed temperature structure for the emission source is required in order to explain the discrepancy.

Phillips, K. J. H.↗
DOE OSTI2024

System-size dependence of the hadronic rescattering effect at energies available at the CERN Large Hadron Collider

The first measurements of K * ( 892 ) 0 resonance production as a function of charged-particle multiplicity in Xe-Xe collisions at s N N = 5.44 TeV and p p collisions at s = 5.02 TeV using the ALICE detector are presented. The resonance is reconstructed at midrapidity ( | y | < 0.5) using the hadronic decay channel K * 0 → K ± π ∓ . Measurements of transverse-momentum integrated yield, mean transverse-momentum, nuclear modification factor of K * 0 , and yield ratios of resonance to stable hadron ( K * 0 / K ) are compared across different collision systems ( p p , p -Pb, Xe-Xe, and Pb-Pb) at similar collision energies to investigate how the production of K * 0 resonances depends on the size of the system formed in these collisions. The hadronic rescattering effect is found to be independent of the size of colliding systems and mainly driven by the produced charged-particle multiplicity, which is a proxy of the volume of produced matter at the chemical freeze-out. In addition, the production yields of K * 0 in Xe-Xe collisions are utilized to constrain the dependence of the kinetic freeze-out temperature on the system size using the hadron resonance gas–partial chemical equilibrium model. ©2024 CERN, for the ALICE Collaboration 2024 CERN

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1982

The structure of the antenna pattern of an adaptive array

The antenna pattern of a receiving adaptive array is investigated for the case of its operation in an environment of one desirable narrow-band signal and (K-1) narrow-band jammers. Results show that the adapted (voltage) antenna pattern of the array is a linear combination of k (or less) basis-patterns, each of which is a function of one source only. It is determined that these basis-patterns have a simple physical meaning in that the k-th basis-pattern is the pattern formed by the array when the transmission of source k is considered a desired signal and all other sources are turned off.

Zohar, S.↗
DOE OSTI2024

Gas Transfer Across Air‐Water Interfaces in Inland Waters: From Micro‐Eddies to Super‐Statistics

In inland water covering lakes, reservoirs, and ponds, the gas exchange of slightly soluble gases such as carbon dioxide, dimethyl sulfide, methane, or oxygen across a clean and nearly flat air‐water interface is routinely described using a water‐side mean gas transfer velocity $\overline{k_{L}}$, where overline indicates time or ensemble averaging. The micro‐eddy surface renewal model predicts $\overline{k_{L}}$ = α o Sc -1/2 ($v\bar{ϵ}$) 1/4 , where Sc is the molecular Schmidt number, $v$ is the water kinematic viscosity, and $\bar{ϵ}$ is the waterside mean turbulent kinetic energy dissipation rate at or near the interface. While α o = 0.39 - 0.46 has been reported across a number of data sets, others report large scatter or variability around this value range. It is shown here that this scatter can be partly explained by high temporal variability in instantaneous ϵ around $\bar{ϵ}$, a mechanism that was not previously considered. As the coefficient of variation (CV e ) in ϵ increases, α o must be adjusted by a multiplier (1 = CV e 2 ) -3/32 that was derived from a log‐normal model for the probability density function of ϵ. Reported variations in α o with a macro‐scale Reynolds number can also be partly attributed to intermittency effects in ϵ. Such intermittency is characterized by the long‐range (i.e., power‐law decay) spatial auto‐correlation function of ϵ. That α o varies with a macro‐scale Reynolds number does not necessarily violate the micro‐eddy model. Instead, it points to a coordination between the macro‐ and micro‐scales arising from the transfer of energy across scales in the energy cascade.

Batchelor scale↗
DOE OSTI2023

A storyline analysis of Hurricane Irma’s precipitation under various levels of climate warming

Abstract Understanding how extreme weather, such as tropical cyclones, will change with future climate warming is an interesting computational challenge. Here, the hindcast approach is used to create different storylines of a particular tropical cyclone, Hurricane Irma (2017). Using the community atmosphere model, we explore how Irma’s precipitation would change under various levels of climate warming. Analysis is focused on a 48 h period where the simulated hurricane tracks reasonably represent Irma’s observed track. Under future scenarios of 2 K, 3 K, and 4 K global average surface temperature increase above pre-industrial levels, the mean 3-hourly rainfall rates in the simulated storms increase by 3–7% K −1 compared to present. This change increases in magnitude for the 95th and 99th percentile 3-hourly rates, which intensify by 10–13% K −1 and 17–21% K −1 , respectively. Over Florida, the simulated mean rainfall accumulations increase by 16–26% K −1 , with local maxima increasing by 18–43% K −1 . All percent changes increase monotonically with warming level.

Environmental Sciences & Ecology↗
NASA NTRS1983

The large scale dust distribution in the inner galaxy

Initial results are presented from a new large-scale survey of the first quadrant of the galactic plane at wavelengths of 160, 260, and 300 microns. The submillimeter wavelength emission, interpreted as thermal radiation by dust grains, reveals an optically thin disk of angular width about 0.09 deg (FWHM) with a mean dust temperature of 23 K and significant variation of the dust mass column density. Comparison of the dust column density with the gas column density inferred from CO survey data shows a striking spatial correlation. The mean luminosity per hydrogen atom is found to be 2.5 x 10 to the -30th W/H, implying a radiant energy density in the vicinity of the dust an order of magnitude larger than in the solar neighborhood. The data favor dust in molecular clouds as the dominant submillimeter radiation source.

Hauser, M. G.↗
NASA NTRS1975

The sublimation kinetics of GeSe single crystals

The sublimation kinetics of (001) oriented GeSe single crystal platelets was studied by high-temperature mass spectroscopy, quantitative vacuum microbalance techniques, and hot stage optical microscopy. For a mean experimental temperature of 563 K, the activation enthalpy and entropy are found to equal 32.3 kcal/mole and 19.1 eu, respectively. The vaporization coefficient is less than unity for the range of test temperatures, and decreases with increasing temperature. The combined experimental data are correlated by means of a multistep surface adsorption mechanism.

Irene, E. A.↗
NASA NTRS1990

Absorption intensities and complex refractive indices of crystalline HCN, HC3N, and C4N2 in the infrared region

IR absorption intensities are presented for thin crystalline films of HCN, HC3N, and C4N2, together with n and k complex refractive indices determined on the basis of an iterative program for the Kramers-Konig integral via a least-squares, point-by-point fitting of the experimental transmission data. It is established that the transmission spectra generated by means of these n and k values can reproduce the experimental transmission observation values to within + or - 2 percent.

Masterson, C. M.↗
DOE OSTI2021

Identifying crystallographic faces of the fluorites urania and thoria with rotational polarized Raman spectroscopy

Crystallite orientation identification is invaluable, but is often limited to small area identification or requires a large area sample. Nondestructive optical methods such as polarized Raman spectroscopy, in contrast, can be used to completely map a variety of sample sizes, but their potential is not yet fully realized. Here, we report a systematic study of polarized Raman scattering of high-quality, hydrothermally grown, single crystals of urania and thoria. The peak intensity variations for as-grown major crystal planes, post-growth polished crystal planes, and a post-growth polished non-crystallographic plane are directly linked to crystallographic orientation and crystal rotation, and agree with computed models. In particular, the parallel polarized peak intensity results are directly correlated with metal–oxygen–metal chains in the fluorite structure and can be used to determine both orientation and rotational alignment of a given crystal face if sufficiently small rotational steps are applied. These results are structure based, being applicable to the larger fluorite phase space, which is useful for optical, semiconductor, nuclear, and solid oxide fuel cell industries. Further, these results suggest that Raman spectroscopy can identify non-crystallographic orientations that are not discernable by traditional means.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Breaking a Lewis Acidity Trend for Rare Earths by Excited State Quenching

Facilitating different chemistries between the rare earth (RE = La–Lu, Sc, Y) ions is of significant interest for their separations. While the bulk of attention has been on maximizing the small differences in their ground state chemistry, interest is beginning to shift toward the differences in their electronic excited states. In this work, we demonstrate modulation of the photostationary state of an azobenzene derivative, Na 1 , via chelation to a series of RE III DO3A (DO3A = 1,4,7,10-tetraazacyclododecane-1,4,7-triacetic acid) complexes. The extent of photoisomerization of 1 – follows the trend in REIII Lewis acidity with two exceptions: Sm III and Er III . UV–vis spectroscopy, titration experiments, and computational analysis show that these exceptions are a result of energy transfer rather than differences in ground state chemistry. Finally, these results open a pathway to differentiate REs by new photochemical means.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1975

Propagation of high amplitude higher order sounds in slightly soft rectangular ducts, carrying mean flow

The resonance expansion method, developed to study the propagation of sound in rigid rectangular ducts is applied to the case of slightly soft ducts. Expressions for the generation and decay of various harmonics are obtained. The effect of wall admittance is seen through a dissipation function in the system of nonlinear differential equations, governing the generation of harmonics. As the wall admittance increases, the resonance is reduced. For a given wall admittance this phenomenon is stronger at higher input intensities. Both the first and second order solutions are obtained and the results are extended to the case of ducts having mean flow.

Wang, K. S.↗
NASA NTRS1986

Precision cast vs. wrought superalloys

While cast polycrystalline superalloys recommend themselves in virtue of better 'buy-to-fly' ratios and higher strengthening gamma-prime volume fractions than those of wrought superalloys, the expansion of their use into such critical superalloy applications as gas turbine hot section components has been slowed by insufficient casting process opportunities for microstructural control. Attention is presently drawn, however, to casting process developments facilitating the production of defect-tolerant superalloy castings having improved fracture reliability. Integrally bladed turbine wheel and thin-walled turbine exhaust case near-net-shape castings have been produced by these means.

Tien, J. K.↗
NASA NTRS1988

The dynamics of the Venus ionosphere

Data from the Pioneer-Venus orbiter has demonstrated the importance of understanding ion dynamics in the Venus ionosphere. The analysis of the data has shown that during solar maximum the topside Venus ionosphere in the dark hemisphere is generated almost entirely on the dayside of the planet during solar maximum, and flows with supersonic velocities across the terminator into the nightside. The flow field in the ionosphere is mainly axially-symmetric about the sun-Venus axis, as are most measured ionospheric quantities. The primary data base used consisted of the ion velocity measurements made by the RPA during three years that periapsis of the orbiter was maintained in the Venus ionosphere. Examples of ion velocities were published and modeled. This research examined the planetary flow patterns measured in the Venus ionosphere, and the physical implications of departures from the mean flow.

Miller, K. L.↗
NASA NTRS1990

Wave propagation in composite media and material characterization

Characteristics of wave propagation in an undamaged composite medium are influenced by many factors, the most important of which are: microstructure, constituent properties, interfaces, residual stress fields, and ply lay-ups. Measurements of wave velocities, attenuation, and dispersion provide a powerful tool for nondestructive evaluation of these properties. Recent developments are reviewed for modeling ultrasonic wave propagation in fiber and particle-reinforced composite media. Additionally, some modeling studies are reviewed for the effects of interfaces and layering on attenuation and dispersion. These studies indicate possible ways of characterizing material properties by ultrasonic means.

Datta, Subhendu K.↗
NASA NTRS1994

Biogenic nonmethane hydrocarbon emissions estimated from tethered balloon observations

A new technique for estimating surface fluxes of trace gases, the mixed-layer gradient technique, is used to calculate isoprene and terpene emissions from forests. The technique is applied to tethered balloon measurements made over the Amazon forest and a pine-oak forest in Alabama at altitudes up to 300 m. The observations were made during the dry season Amazon Boundary Layer Experiment (ABLE 2A) and the Rural Oxidants in the Southern Environment 1990 experiment (ROSE I). Results from large eddy simulations of scalar transport in the clear convective boundary layer are used to infer fluxes from the balloon profiles. Profiles from the Amazon give a mean daytime emission of 3630 +/- 1400 micrograms isoprene sq m/h, where the uncertainty represents the standard deviation of the mean of eight flux estimates. Twenty profiles from Alabama give emissions of 4470 +/- 3300 micrograms isoprene sq m/h, 1740 +/- 1060 micrograms alpha-pinene sq m/h, and 790 +/- 560 micrograms beta-pinene sq m/h, respectively. These results are in agreement with emissions derived from chemical budgets. The emissions may be overestimated because of uncertainty about how to incorporate the effects of the canopy on the mixed-layer gradients. The large variability in these emission estimates is probably due to the relatively short sampling times of the balloon profiles, though spatially heterogeneous emissions may also play a role. Fluxes derived using this technique are representative of an upwind footprint of several kilometers and are independent of hydrocarbon oxidation rate and mean advection.

Davis, K. J.↗
NASA NTRS1986

Channel specific rate constants for reactions of O(1D) with HCl and HBr

The absolute rate coefficients and product yields for reactions of O(1D) with HCl(1) and HBr(2) at 287 K are presently determined by means of the time-resolved resonance fluorescence detection of O(3P) and H(2S) in conjunction with pulsed laser photolysis of O3/HX/He mixtures. Total rate coefficients for O(1D) removal are found to be, in units of 10 to the -10th cu cm/molecule per sec, k(1) = 1.50 + or - 0.18 and k(2) 1.48 + or - 0.16; the absolute accuracy of these rate coefficients is estimated to be + or - 20 percent.

Wine, P. H.↗
NASA NTRS2000

Rate Constant and RRKM Product Study for the Reaction Between CH3 and C2H3 at T = 298K

The total rate constant k1 has been determined at P = 1 Torr nominal pressure (He) and at T = 298 K for the vinyl-methyl cross-radical reaction CH3 + C2H3 yields products. The measurements were performed in a discharge flow system coupled with collision-free sampling to a mass spectrometer operated at low electron energies. Vinyl and methyl radicals were generated by the reactions of F with C2H4 and CH4, respectively. The kinetic studies were performed by monitoring the decay of C2H3 with methyl in excess, 6 < |CH3|(sub 0)/|C2H3|(sub 0) < 21. The overall rate coefficient was determined to be k1(298 K) = (1.02 +/- 0.53)x10(exp -10) cubic cm/molecule/s with the quoted uncertainty representing total errors. Numerical modeling was required to correct for secondary vinyl consumption by reactions such as C2H3 + H and C2H3 + C2H3. The present result for k1 at T = 298 K is compared to two previous studies at high pressure (100-300 Torr He) and to a very recent study at low pressure (0.9-3.7 Torr He). Comparison is also made with the rate constant for the similar reaction CH3 + C2H5 and with a value for k1 estimated by the geometric mean rule employing values for k(CH3 + CH3) and k(C2H3 + C2H3). Qualitative product studies at T = 298 K and 200 K indicated formation of C3H6, C2H2, and C2H5 as products of the combination-stabilization, disproportionation, and combination-decomposition channels, respectively, of the CH3 + C2H3 reaction. We also observed the secondary C4H8 product of the subsequent reaction of C3H5 with excess CH3; this observation provides convincing evidence for the combination-decomposition channel yielding C3H5 + H. RRKM calculations with helium as the deactivator support the present and very recent experimental observations that allylic C-H bond rupture is an important path in the combination reaction. The pressure and temperature dependencies of the branching fractions are also predicted.

Thorn, R. Peyton, Jr.↗