Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “insertion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Dramatic Conformer-Dependent Reactivity of the Acetaldehyde Oxide Criegee Intermediate with Dimethylamine Via a 1,2-Insertion Mechanism

The reactivity of carbonyl oxides has previously been shown to exhibit strong conformer and substituent dependencies. Through a combination of synchrotron multiplexed photoionization mass spectrometry experiments (298 K, 4 Torr) and high-level theory (CCSD(T)-F12/cc-pVTZ-F12//B2PLYP-D3/cc-pVTZ with an added CCSDT(Q) correction), we explore the conformer dependence of the reaction of acetaldehyde oxide (CH 3 CHOO) with dimethyl amine (DMA). The experimental data supports the theoretically predicted 1,2-insertion mechanism and the formation of an amine-functionalized hydroperoxide reaction product. Tunable-VUV photoionization probing of anti- or anti- + syn-CH 3 CHOO reveals a strong conformer dependence of the title reaction. Here, the rate coefficient of DMA with anti-CH 3 CHOO is predicted to exceed that for the reaction with syn-CH 3 CHOO by a factor of ~34,000, which is attributed to submerged barrier (syn) vs. barrierless (anti) mechanisms for energetically downhill reactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Size-Matching Ligand Insertion in MOF-74 for Enhanced CO 2 Capture under Humid Conditions

Among various class of materials, metal organic frameworks (MOFs) are one of the most promising candidates for CO2 capture from flue gases. In particular, M-MOF-74, where M represents different metals, are equipped with open metal sites that can lead to very high CO2 uptake at postcombustion flue gas conditions. However, these structures are known to have poor CO2 capture performance under humid conditions as water molecules bind strongly to the unsaturated metal sites, outcompeting the CO2. In this computational study, a pore space partition strategy is employed through a symmetry-matching regulated ligand insertion within the Mg-MOF-74 and Zn-MOF-74 structures, which mitigates the deterioration effect of water. In the case of Zn-MOF-74, higher selectivity as well as larger CO2 uptake in binary mixture conditions is obtained, thereby demonstrating that reduction in the pore size of MOFs can serve as viable strategy to capture CO2 under humid postcombustion conditions.

Suh, Bong Lim↗

Ligand Insertion in MOF-74 as Effective Design for Oxidation of Ethane to Ethanol

We report that efficient conversion of ethane into valuable materials is important with the availability of new natural gas resources. Recently, metal–organic frameworks (MOFs) with open iron sites (i.e., Fe 0.1 Mg 1.9 -MOF-74) have been shown to be promising material for catalyzing ethane to ethanol. In this computational study, various size-matching ligands are inserted into the Fe 0.1 Mg 1.9 -MOF-74 structure to further optimize this reaction. Our density functional theory calculations show that the presence of ligands enhances the binding affinity of the oxygen atoms of N2O to the iron atoms in the framework, thereby leading to an improvement in the oxidizing process. Furthermore, the reaction pathways for the new structures show reduced enthalpy barrier in the rate-determining step in the oxidation of ethane reaction cycle compared to the original Fe 0.1 Mg 1.9 -MOF-74. In conclusion, these findings provide ways in which the performance of the Fe 0.1 Mg 1.9 -MOF-74 can be optimized for next-generation catalysts.

36 MATERIALS SCIENCE↗

Investigation of Ca Insertion into α-MoO 3 Nanoparticles for High Capacity Ca-Ion Cathodes

Calcium-ion batteries (CIBs) are a promising alternative to lithium-ion batteries (LIBs) due to the low redox potential of calcium metal and high abundance of calcium compounds. Due to its layered structure, α-MoO 3 is regarded as a promising cathode host lattice. While studies have reported that α-MoO 3 can reversibly intercalate Ca ions, limited electrochemical activity has been noted, and its reaction mechanism remains unclear. Here, we re-examine Ca insertion into α-MoO 3 nanoparticles with a goal to improve reaction kinetics and clarify the storage mechanism. The α-MoO 3 electrodes demonstrated a specific capacity of 165 mA h g –1 centered near 2.7 V vs Ca 2+ /Ca, stable long-term cycling, and good rate performance at room temperature. Furthermore, this work demonstrates that, under the correct conditions, layered oxides can be a promising host material for CIBs and renews prospects for CIBs.

36 MATERIALS SCIENCE↗

U–C Bond Insertion, Ring-Opening, and C–H Activation in a Uranium Bis(diisopropylamino)cyclopropenylidene (BAC) Adduct

Reaction of [U(NR 2 ) 3 ] (R = SiMe 3 ) with 1 equiv of bis(diisopropylamino)cyclopropenylidene (BAC) in Et 2 O results in the formation of [(NR 2 ) 3 U(BAC)] (1), which can be isolated in modest yields. Thermolysis of 1 in C 6 D 6 at 85 °C results in the formation of the ring-opened U(IV) product, [(NR 2 ) 2 U{N(R)(SiMe 2 CH=C(NiPr 2 )C(NiPr 2 )=CH)}] (2), which can be isolated in low yields. Mechanistic studies suggest that the formation of 2 proceeds via dissociation of BAC from 1 to regenerate [U(NR 2 ) 3 ], which converts into [U{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ] at the elevated temperatures. BAC then inserts into the U–C bond of [U{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ] to generate a cyclopropenyl intermediate, which undergoes ring opening and C–H activation to afford the final product, 2. We hypothesize that the ring-opening generates an unobserved carbene intermediate. Notably, thermolysis of a 1:1 mixture of independently prepared [U{N(R)(SiMe 2 CH 2 )}(NR 2 ) 2 ] and BAC results in clean formation of 2, providing strong support for the proposed mechanism. The formulations of both 1 and 2 were confirmed by X-ray crystallography. Finally, theoretical calculations indicate that the hypothesized uranium carbene intermediate features strong U–C bonding, potentially with some carbyne character in the electronic structure.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Insertion of dNTPs Opposite the 1,N[superscript 2]-Propanodeoxyguanosine Adduct by Sulfolobus solfataricus P2 DNA Polymerase IV

1,N{sup 2}-Propanodeoxyguanosine (PdG) is a stable structural analogue for the 3-(2'-deoxy-{beta}-d-erythro-pentofuranosyl)pyrimido[1,2-?]purin-10(3H)-one (M{sub 1}dG) adduct derived from exposure of DNA to base propenals and to malondialdehyde. The structures of ternary polymerase-DNA-dNTP complexes for three template-primer DNA sequences were determined, with the Y-family Sulfolobus solfataricus DNA polymerase IV (Dpo4), at resolutions between 2.4 and 2.7 {angstrom}. Three template 18-mer-primer 13-mer sequences, 5'-d(TCACXAAATCCTTCCCCC)-3'{center_dot}5'-d(GGGGGAAGGATTT)-3' (template I), 5'-d(TCACXGAATCCTTCCCCC)-3'{center_dot}5'-d(GGGGGAAGGATTC)-3' (template II), and 5'-d(TCATXGAATCCTTCCCCC)-3'{center_dot}5'-d(GGGGGAAGGATTC)-3' (template III), where X is PdG, were analyzed. With templates I and II, diffracting ternary complexes including dGTP were obtained. The dGTP did not pair with PdG, but instead with the 5'-neighboring template dC, utilizing Watson-Crick geometry. Replication bypass experiments with the template-primer 5?-TCACXAAATCCTTACGAGCATCGCCCCC-3'{center_dot}5'-GGGGGCGATGCTCGTAAGGATTT-3', where X is PdG, which includes PdG in the 5'-CXA-3' template sequence as in template I, showed that the Dpo4 polymerase inserted dGTP and dATP when challenged by the PdG adduct. For template III, in which the template sequence was 5'-TXG-3', a diffracting ternary complex including dATP was obtained. The dATP did not pair with PdG, but instead with the 5'-neighboring T, utilizing Watson-Crick geometry. Thus, all three ternary complexes were of the 'type II' structure described for ternary complexes with native DNA [Ling, H., Boudsocq, F., Woodgate, R., and Yang, W. (2001) Cell 107, 91--102]. The PdG adduct remained in the anti conformation about the glycosyl bond in each of these threee ternary complexes. These results provide insight into how -1 frameshift mutations might be generated for the PdG adduct, a structural model for the exocylic M{sub 1}dG adduct formed by malondialdehyde.

59 BASIC BIOLOGICAL SCIENCES↗

Combining pair distribution function and computational methods to understand lithium insertion in brookite (TiO{sub 2}).

X-ray pair distribution function (PDF) methods and first-principles calculations have been combined to probe the structure of electrochemically lithiated TiO{sub 2} Brookite. Traditional powder diffraction studies suggest that Brookite amorphizes upon lithium insertion, with the Bragg reflections disappearing. However, PDF analysis indicates that the TiO{sub 2} framework connectivity is maintained throughout lithium intercalation, with expansions along the a and b axes. The Li{sup +} ions within the framework are poorly observed in the X-ray PDF, which is dominated by contributions from the more strongly scattering Ti and O atoms. First-principles calculations were used to identify energetically favorable Li{sup +} sites within the Brookite lattice and to develop a complete structural model of the lithiated material. This model replicates the local structure and decreased intermediate range order observed in the PDF data. The analysis suggests that local structural distortions of the TiO{sub 2} lattice accommodate lithium in five-coordinate sites. This structural model is consistent with the observed electrochemical behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure- and Heat-Induced Insertion of CO2 into an Auxetic Small-Pore Zeolite

When the small-pore zeolite natrolite is compressed at ca. 1.5 GPa and heated to ca. 110 C in the presence of CO{sub 2}, the unit cell volume of natrolite expands by 6.8% and ca. 12 wt % of CO{sub 2} is contained in the expanded elliptical channels. This CO{sub 2} insertion into natrolite is found to be reversible upon pressure release.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mg-Ion Battery Electrode: An Organic Solid’s Herringbone Structure Squeezed upon Mg-Ion Insertion

We report that crystalline 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA), an organic solid, is highly amenable to host divalent metal ions, i.e., Mg 2+ and Ca 2+ , in aqueous electrolytes, where the van der Waals structure is intrinsically superior in hosting charge-dense ions. We observe that the divalent nature of Mg 2+ causes unique squeezing deformation of the electrode structure, where it contracts and expands in different crystallographic directions when hosting the inserted Mg-ions. This phenomenon is revealed experimentally by ex situ X-ray diffraction and transmission electron microscopy, and is investigated theoretically by first-principles calculations. Interestingly, hosting one Mg 2+ ion requires the coordination from three PTCDA molecules in adjacent columns of stacked molecules, which rotates the columns, thus reducing the (011) spacing but increasing the (021) spacing. Here, we demonstrate that a PTCDA Mg-ion electrode delivers a reversible capacity of 125 mA h g –1 , which may include a minor contribution of hydronium storage, a good rate capability by retaining 75 mA h g –1 at 500 mA g –1 (or 3.7 C), and a stable cycle life. We also report Ca 2+ storage in PTCDA, where a reversible capacity of over 80 mA h g –1 is delivered.

25 ENERGY STORAGE↗

Pressure-Induced Argon Insertion into an Auxetic Small Pore Zeolite

We report that natrolite, Na{sub 16}Al{sub 16}Si{sub 24}O{sub 48} {center_dot} 16H{sub 2}O, a small pore auxetic zeolite can incorporate significant amounts of Argon under moderate pressure- and temperature conditions resulting in Na{sub 16}Al{sub 16}Si{sub 24}O{sub 80} {center_dot} 16H{sub 2}O {center_dot} 6Ar. This material has a {approx}6.5% larger unit cell than natrolite at ambient conditions and its structure is related to Na{sub 16}Al{sub 16}Si{sub 24}O{sub 80} {center_dot} 24H{sub 2}O, an intermediate superhydrated natrolite referred to as para-natrolite. Argon insertion under pressure into auxetic frameworks such as natrolites is an important and overlooked confinement mechanism with potential applications and implications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-assembled TiO2-Graphene Hybrid Nanostructures for Enhanced Li-ion Insertion

We used anionic sulfate surfactants to assist the stabilization of graphene in aqueous solutions and facilitate the self-assembly of in-situ grown nanocrystalline TiO2, rutile and anatase, with graphene. These nanostructured TiO2-graphene hybrid materials were used for investigation of Li-ion insertion properties. The hybrid materials showed significantly enhanced Li-ion insertion/extraction in TiO2. The specific capacity was more than doubled at high charge rates, as compared with the pure TiO2 phase. The improved capacity at high charge-discharge rate may be attributed to increased electrode conductivity in presence of a percolated graphene network embedded into the metal oxide electrodes.

25 ENERGY STORAGE↗

A charge-density-based general cation insertion algorithm for generating new Li-ion cathode materials

Future lithium (Li) energy storage technologies, in particular solid-state configurations with a Li metal anode, opens up the possibility of using cathode materials that do not necessarily contain Li in its as-made state. To accelerate the discovery and design of such materials, we develop a general, chemically, and structurally agnostic methodology for identifying the optimal Li sites in any crystalline material. For a given crystal structure, we attempt multiple Li insertions at symmetrically in-equivalent positions by analyzing the electronic charge density obtained from first-principles density functional theory. In this report, we demonstrate the effectiveness of this procedure in successfully identifying the positions of the Li ion in well-known cathode materials using only the empty host (charged) material as guidance. Furthermore, applying the algorithm to over 2000 candidate cathode empty host materials we obtain statistics of Li site preferences to guide future developments of novel Li-ion cathode materials, particularly for solid-state applications.

25 ENERGY STORAGE↗

New proposed ITER divertor design using carbon insert on tungsten to mitigate ELMs and secondary radiation effects on nearby components

Abstract Building a successful device for the magnetic fusion energy production is a great challenge. ITER is an international project of the tokamak based magnetic fusion design being developed for the demonstration of the feasibility of thermonuclear technologies for future realization of successful commercial fusion energy. A key obstacle to a successful magnetic fusion energy production is however, the performance during abnormal events including plasma disruptions and edge-localized modes (ELMs). A credible reactor design must tolerate at least a few of these transient events without serious consequences such as melting of the structure. This paper investigates and compares the performance of the current ITER tokamak design during two types of transient events, i.e., ELMs occurring at normal operation and disruptions during abnormal operation. We simulated the divertor components response using our integrated 3D HEIGHTS package. The simulations include self-consistent modeling of the interaction of the released core plasma particles with the initial solid divertor material, energy deposition processes, vaporization of divertor material, secondary plasma formation and MHD evolution, incident core particles collisions and scattering from this dense secondary plasma, photon radiation of secondary plasma, and the resulting heat loads on nearby components. Our simulations showed that using a small carbon insert around the strike point can significantly reduce the overall expected damage on the tungsten dome structure, reflector plates, and prevent tungsten vaporization and its potential core plasma contamination.

47 OTHER INSTRUMENTATION↗

Carbon nanorings with inserted acenes: Breaking symmetry in excited state dynamics

Conjugated cycloparaphenylene rings have unique electronic properties being the smallest segments of carbon nanotubes. Their conjugated backbones support delocalized electronic excitations, which dynamics is strongly influenced by cyclic geometry. Here we present a comparative theoretical study of the electronic and vibrational energy relaxation and redistribution in photoexcited cycloparaphenylene carbon nanorings with inserted naphthalene, anthracene, and tetracene units using non-adiabatic excited-state molecular dynamics simulations. Calculated excited state structures reflect modifications of optical selection rules and appearance of low-energy electronic states localized on the acenes due to gradual departure from a perfect circular symmetry. After photoexcitation, an ultrafast electronic energy relaxation to the lowest excited state is observed on the time scale of hundreds of femtoseconds in all molecules studied. Concomitantly, the efficiency of the exciton trapping in the acene raises when moving from naphthalene to anthracene and to tetracene, being negligible in naphthalene, and ~60% and 70% in anthracene and tetracene within the first 500 fs after photoexcitation. Observed photoinduced dynamics is further analyzed in details using induced molecular distortions, delocatization properties of participating electronic states and non-adiabatic coupling strengths. Lastly, our results provide a number of insights into design of cyclic molecular systems for electronic and light-harvesting applications.

36 MATERIALS SCIENCE↗

Synergistic enhancement of nitrogen and sulfur co-doped graphene with carbon nanospheres insertion for electrocatalytic oxygen reduction reaction

A nitrogen and sulfur co-doped graphene/carbon black (NSGCB) nanocomposite for the oxygen reduction reaction (ORR) was synthesized through a one-pot annealing of a precursor mixture containing graphene oxide, thiourea, and acidized carbon black (CB). The NSGCB showed excellent performance for the ORR with the onset and half-way potentials at 0.96 V and 0.81 V (vs. RHE), respectively. It is significantly improved over that of the catalysts derived from only graphene (0.90 V and 0.76 V) or carbon nanosphere (0.82 V and 0.74 V). The enhanced catalytic activity on the NSGCB electrode could be attributed to the synergistic effect of N/S co-doping and the enlarged interlayer space resulted from the insertion of carbon nanosphere into the graphene sheets. The four-electron selectivity and the limiting current density of the NSGCB nanocomposite are comparable to that of the commercially Pt/C catalyst. Furthermore, the NSGCB nanocomposite was superior to Pt/C in terms of long-term durability and tolerance to methanol poisoning.

36 MATERIALS SCIENCE↗

Arrested α-hydride migration activates a phosphido ligand for C–H insertion

Bulky tris(carbene)borate ligands provide access to high spin iron(II) phosphido complexes. The complex PhB(MesIm) 3 FeP(H)Ph is thermally unstable, and we observed [PPh] group insertion into a C–H bond of the supporting ligand. An arrested α-hydride migration mechanism suggests increased nucleophilicity of the phosphorus atom facilitates [PPh] group transfer reactivity.

Hickey, Anne K.↗

Investigation of sodium insertion–extraction in olivine Na x FePO 4 (0 ≤ x ≤ 1) using first-principles calculations

Olivine NaFePO4 has recently attracted the attention of the scientific community as a promising cathode material for Na-ion batteries. In this work we combine density functional theory (DFT) calculations and high resolution synchrotron X-ray diffraction (HRXRD) experiments to study the phase stability of NaxFePO4 along the whole range of sodium compositions (0 ≤ x ≤ 1). DFT calculations reveal the existence of two intermediate structures governing the phase stability at x = 2/3 and x = 5/6. This is in contrast to isostructural LiFePO4, which is a broadly used cathode in Li-ion batteries. Na2/3FePO4 and Na5/6FePO4 ground states both align vacancies diagonally within the ab plane, coupled to a Fe2+/Fe3+ alignment. HRXRD data for NaxFePO4 (2/3 < x < 1) materials show common superstructure reflections up to x = 5/6 within the studied compositions. The computed intercalation voltage profile shows a voltage difference of 0.16 V between NaFePO4 and Na2/3FePO4 in agreement with the voltage discontinuity observed experimentally during electrochemical insertion.

Saracibar, A.↗