SEARCH · Engineering Papers

Results for “global refinement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

All sources NASA NTRS DOE OSTI

DOE OSTI2017

Individual phase constitutive properties of a TRIP-assisted QP980 steel from a combined synchrotron X-ray diffraction and crystal plasticity approach

Microstructure-based constitutive models for multiphase steels require accurate constitutive properties of the individual phases for component forming and performance simulations. We address this requirement with a combined experimental/theoretical methodology which determines the critical resolved shear stresses and hardening parameters of the constituent phases in QP980, a TRIP assisted steel subject to a two-step quenching and partitioning heat treatment. High energy X-Ray diffraction (HEXRD) from a synchrotron source provided the average lattice strains of the ferrite, martensite, and austenite phases from the measured volume during in situ tensile deformation. The HEXRD data was then input to a computationally efficient, elastic-plastic self-consistent (EPSC) crystal plasticity model which estimated the constitutive parameters of different slip systems for the three phases via a trial-and-error approach. The EPSC-estimated parameters are then input to a finite element crystal plasticity (CPFE) model representing the QP980 tensile sample. The predicted lattice strains and global stress versus strain curves are found to be 8% lower that the EPSC model predicted values and from the HEXRD measurements, respectively. This discrepancy, which is attributed to the stiff secant assumption in the EPSC formulation, is resolved with a second step in which CPFE is used to iteratively refine the EPSC-estimated parameters. Remarkably close agreement is obtained between the theoretically-predicted and experimentally derived flow curve for the QP980 material.

Hu, X. H. (ORCID:0000000277355091)↗

NASA NTRS1990

Calibration of long term satellite ozone data sets using the space shuttle

Trends in atmospheric ozone continue to be an environmental concern. Drifts in satellite observations are the major obstacle in the detection of changes in global ozone over the long term. Careful re-analysis of satellite ozone data along with groundbased observations have more or less corroborated photochemical models which predict ozone depletion. However, there remains the margin of error in the observations that is as large as the trend itself. The National Plan for Stratospheric Monitoring calls for monitoring global ozone for at lease the next ten years employing the NOAA polar orbiting satellites. Ozone observations will be made with the Solar Backscatter Ultraviolet Spectral Radiometer Mod 2 (SBUV/2) which ia a refinement of the SBUV instrument flying on NASA's Nimbus-7 satellite. The first instrument in the operational series began taking data from the NOAA-9 spacecraft in February 1985. A second instrument was launched on NOAA-11 in September 1988. Both continue to operate. Earlier attempts to calibrate satellite data relied on comparisons with ground based observations. However, differences in instrumental techniques severely complicated these efforts. This problem will be over come by regular flights, about once per year, of the Shuttle Solar Backscatter Ultraviolet radiometer (SSBUV). The data from the SSBUV instrument will be compared with nearly coincident data taken by the NOAA satellite instruments. This procedure will permit a direct calibration transfer in space, since the two instruments observe the same qualities thereby bypassing the inversion algorithm which converts the observations to ozone amounts.

Hilsenrath, Ernest↗

NASA NTRS1993

Aerosol chemistry in GLOBE

This task addresses the measurement and understanding of the physical and chemical properties of aerosol in remote regions that are responsible for aerosol backscatter at infrared wavelengths. Because it is representative of other clean areas, the remote Pacific is of extreme interest. Emphasis is on the determination size dependent aerosol properties that are required for modeling backscatter at various wavelengths and upon those features that may be used to help understand the nature, origin, cycling and climatology of these aerosols in the remote troposphere. Empirical relationships will be established between lidar measurements and backscatter derived from the aerosol microphysics as required by the NASA Doppler Lidar Program. This will include the analysis of results from the NASA GLOBE Survey Mission Flight Program. Additional instrument development and deployment will be carried out in order to extend and refine this data base. Identified activities include participation in groundbased and airborne experiments. Progress to date includes participation in, analysis of, and publication of results from Mauna Loa Backscatter Intercomparison Experiment (MABIE) and Global Backscatter Experiment (GLOBE).

Clarke, Antony D.↗

NASA NTRS1994

Further development and flight test of an autonomous precision landing system using a parafoil

NASA Dryden Flight Research Center and NASA Johnson Space Center are jointly conducting a phased program to determine the feasibility of the autonomous recovery of a spacecraft using a ram-air parafoil system for the final stages of entry from space to a precision landing. The feasibility is being studied using a flight model of a spacecraft in the generic shape of a flattened biconic that weighs approximately 120 lb and is flown under a commercially available ram-air parafoil. Key components of the vehicle include the global positioning system (GPS) guidance for navigation, a flight control computer, an electronic compass, a yaw rate gyro, and an onboard data recorder. A flight test program is being used to develop and refine the vehicle. The primary flight goal is to demonstrate autonomous flight from an altitude of 3,000 m (10,000 ft) with a lateral offset of 1.6 km (1.0 mi) to a precision soft landing. This paper summarizes the progress to date. Much of the navigation system has been tested, including a heading tracker that was developed using parameter estimation techniques and a complementary filter. The autoland portion of the autopilot is still in development. The feasibility of conducting the flare maneuver without servoactuators was investigated as a means of significantly reducing the servoactuator rate and load requirements.

Murray, James E.↗

NASA NTRS2014

Comparing MODIS C6 'Deep Blue' and 'Dark Target' Aerosol Data

The MODIS Collection 6 Atmospheres product suite includes refined versions of both 'Deep Blue' (DB) and 'Dark Target' (DT) aerosol algorithms, with the DB dataset now expanded to include coverage over vegetated land surfaces. This means that, over much of the global land surface, users will have both DB and DT data to choose from. A 'merged' dataset is also provided, primarily for visualization purposes, which takes retrievals from either or both algorithms based on regional and seasonal climatologies of normalized difference vegetation index (NDVI). This poster present some comparisons of these two C6 aerosol algorithms, focusing on AOD at 550 nm derived from MODIS Aqua measurements, with each other and with Aerosol Robotic Network (AERONET) data, with the intent to facilitate user decisions about the suitability of the two datasets for their desired applications.

MODIS Collection 6↗

NASA NTRS2022

Local Scale (3-M) Soil Moisture Mapping Using SMAP and Planet Superdove

A capability for mapping meter-level resolution soil moisture with frequent temporal sampling over large regions is essential for quantifying local-scale environmental heterogeneity and eco-hydrologic behavior. However, available surface soil moisture (SSM) products generally involve much coarser grain sizes ranging from 30 m to several 10s of kilometers. Hence a new method is proposed to estimate 3-m resolution SSM using a combination of multi-sensor fusion, machine- learning (ML) and Cumulative Distribution Function (CDF) matching approaches. This method established favorable SSM correspondence between 3-m pixels and overlying 9-km grid cells from overlapping Planet SuperDove (PSD) observations and NASA Soil Moisture Active-Passive (SMAP) mission products. The resulting 3-m SSM predictions showed improved accuracy by reducing ab- solute bias and RMSE by ~0.01 cm3/cm3 over the original SMAP data in relation to in-situ soil moisture measurements for the Australian Yanco region, while preserving the high sampling frequency (1-3 day global revisit) and sensitivity to surface wetness (R 0.865) from SMAP. Heterogeneous soil moisture distributions varying with vegetation biomass gradients and irrigation regimes were generally captured within a selected study area. Further algorithm refinement and implementation for regional applications will allow for improvement in water resources management, precision agriculture, and disaster forecasts and responses.

soil moisture↗

DOE OSTI2021

Design and Performance of a Smartphone-based Cosmic Ray Observatory

This dissertation examines the feasibility of appropriating the global network of smartphones as an observatory for ultra-high-energy cosmic rays. An application and cloud-based data-acquisition system are first proposed for such an observatory, in which heterogenous devices self-calibrate and server feedback optimizes individual device triggers. Methods of monitoring and manually controlling this network are also examined. Detection efficiencies for cosmic muons, MeV-scale gamma rays, and 120 GeV protons are then measured for this trigger, with which a Monte Carlo pixel model is fine-tuned. Extending this model to cosmic ray showers, the effective area of the observatory for super-GZK primaries is shown to equal that of the Pierre Auger Observatory with a global participation rate under 0.1%, far below initial estimates presented in Ref. [83]. A vastly improved sensitivity to photons and more precise modeling of electrons are primarily responsible for this discrepancy, though more refined models of the combinatorial background may yet lead to more stringent requirements.

Swaney, Jeff↗

NASA NTRS1995

Comment on 'The Global Resurfacing of Venus' by R. G. Strom, G.G. Schaber, and D.D. Dawson

The distribution of impact craters on Venus has been the subject of a great deal of analysis since the return of Magellan data. Phillips el al. (1992) performed Monte Carlo two-dimensional (2-D) modeling of the areal distribution of craters, and the results of that exercise allowed a restricted, but still quite large, range of possible planetary resurfacing histories, including the possibility that the crater, were emplaced on a geologically inactive planet. However, the nonrandom distribution of embayed and deformed craters (Phillips el al., 1992), the hypsometric distribution of craters (Herrick and Phillips, 1994), the varied degradation states of craters (Izenberg et al., 1994), their nonrandom distribution with different geologic terrain types (Namiki and Solomon, 1994; Price et al, 1994), and three-dimensional resurfacing modeling (Bullock el al., 1993) all seem to argue against that particular possibility. In contrast, Strom el al. (1994) have collected a refined and more comprehensive data set of impact features, and they input these data into more sophisticated 2-D Monte Carlo modeling and statistical analyses of the areal distribution of craters, the hypsometric distribution of craters, and the number of embayed craters. They concluded that 'Venus experienced a global resurfacing event about 300 m.y. ago followed by a dramatic reduction of volcanism and tectonism. This global resurfacing event ended abruptly (less than 10 m.y.). The present crater population has accumulated since then and remains largely intact . . . only about 4%-6% of the planet has been volcanically resurfaced since the global event . . .' If these conclusions are well-founded, this work certainly represents a significant advancement in restricting tile number of plausible resurfacing histories for the planet. If Strom et al. (1994) are correct, it would also mean that all of the other aforementioned works are in error to various degrees, or at least represent overzealous interpretation of the data. However, we have identified apparent flaws in the observations, modeling, and interpretations presented by Strom el al. (1994) that lead us to question whether their conclusions are warranted. We limit our comments to three areas of their analysis: (1) observations pertaining to the number and area of disrupted and pristine craters and crater-related features, (2) modeling of the areal and elevation distribution of craters, and (3) interpretations of resurfacing models.

Herrick, Robert R.↗

NASA NTRS2001

Terrestrial Environmental Variables Derived From EOS Platform Sensors

The three main objectives of the overall project were: 1. Adaptation of environmental constraint methods to take advantage of EOS sensors, specifically, MODIS, ASTER, and Landsat-7, in addition to the PM AVHRR observations 2. Refinement of environmental constraint methods based on fundamental scientific knowledge. 3. Assessment of spatial scaling patterns in environmental constraint measurements to evaluate the potential biases and errors that occur when estimating regional and global-scale NPP patterns with moderate to coarse satellite observations. These goals were modified because, on one hand, MODIS data did not become available until after the first year of the project and because of project staffing issues at the University of Maryland., The OSU portion of the project contained a modest amount of funding and responsibility compared to the University of Maryland and the University of Toledo.

Stadler, Stephen J.↗

NASA NTRS2011

The NASA CloudSat/GPM Light Precipitation Validation Experiment (LPVEx)

Ground-based measurements of cool-season precipitation at mid and high latitudes (e.g., above 45 deg N/S) suggest that a significant fraction of the total precipitation volume falls in the form of light rain, i.e., at rates less than or equal to a few mm/h. These cool-season light rainfall events often originate in situations of a low-altitude (e.g., lower than 2 km) melting level and pose a significant challenge to the fidelity of all satellite-based precipitation measurements, especially those relying on the use of multifrequency passive microwave (PMW) radiometers. As a result, significant disagreements exist between satellite estimates of rainfall accumulation poleward of 45 deg. Ongoing efforts to develop, improve, and ultimately evaluate physically-based algorithms designed to detect and accurately quantify high latitude rainfall, however, suffer from a general lack of detailed, observationally-based ground validation datasets. These datasets serve as a physically consistent framework from which to test and refine algorithm assumptions, and as a means to build the library of algorithm retrieval databases in higher latitude cold-season light precipitation regimes. These databases are especially relevant to NASA's CloudSat and Global Precipitation Measurement (GPM) ground validation programs that are collecting high-latitude precipitation measurements in meteorological systems associated with frequent coolseason light precipitation events. In an effort to improve the inventory of cool-season high-latitude light precipitation databases and advance the physical process assumptions made in satellite-based precipitation retrieval algorithm development, the CloudSat and GPM mission ground validation programs collaborated with the Finnish Meteorological Institute (FMI), the University of Helsinki (UH), and Environment Canada (EC) to conduct the Light Precipitation Validation Experiment (LPVEx). The LPVEx field campaign was designed to make detailed measurements of cool-season light precipitation by leveraging existing infrastructure in the Helsinki Precipitation Testbed. LPVEx was conducted during the months of September--October, 2010 and featured coordinated ground and airborne remote sensing components designed to observe and quantify the precipitation physics associated with light rain in low-altitude melting layer environments over the Gulf of Finland and neighboring land mass surrounding Helsinki, Finland.

Petersen, Walter A.↗

NASA NTRS2021

Satellite Constraints on the Latitudinal Distribution and Temperature Sensitivity of Wetland Methane Emissions

Wetland methane (CH4) emissions comprise about one-third of the global CH4 source. The latitudinal distribution and climate sensitivity of wetland CH4 fluxes are the key determinants of the global CH4-climate feedback. However, large differences exist between bottom-up estimates, informed by ground-based flux measurements, and top-down estimates derived from spaceborne total column CH4. Despite the extensive coverage of satellite CH4 concentration observations, challenges remain with using top-down estimates to test bottom-up models, mainly because of the uncertainties in the satellite retrievals, the model representation errors, the variable prior emissions, and the confounding role of the posterior error covariance structures. Here, we use satellite-based top-down CH4 flux estimates (2010–2012) to test and refine 42 bottom-up estimates of wetland emissions that use a range of hypothesized wetland extents and process controls. Our comparison between bottom-up models and satellite-based fluxes innovatively accounts for cross-correlations and spatial uncertainties typically found in top-down inverse estimates, such that only the information from satellite observations and the atmospheric transport model is kept as a constraint. We present a satellite-constrained wetland CH4 ensemble product derived from assembling the highest-performance bottom-up models, which estimates global wetland CH4 emissions of 148 (117–189, 5th–95th percentile) Tg CH4 yr−1. We find that tropical wetland emissions contribute 72% (63%–85%) to the global wetland total. We also find that a lower-than-expected temperature sensitivity agrees better with atmospheric CH4 measurements. Overall, our approach demonstrates the potential for using satellites to quantitatively refine bottom-up wetland CH4 emission estimates, their latitudinal distributions, and their sensitivity to climate.

wetland ch4↗

NASA NTRS2016

Soil Moisture Active Passive Mission L4_C Data Product Assessment (Version 2 Validated Release)

The SMAP satellite was successfully launched January 31st 2015, and began acquiring Earth observation data following in-orbit sensor calibration. Global data products derived from the SMAP L-band microwave measurements include Level 1 calibrated and geolocated radiometric brightness temperatures, Level 23 surface soil moisture and freezethaw geophysical retrievals mapped to a fixed Earth grid, and model enhanced Level 4 data products for surface to root zone soil moisture and terrestrial carbon (CO2) fluxes. The post-launch SMAP mission CalVal Phase had two primary objectives for each science product team: 1) calibrate, verify, and improve the performance of the science algorithms, and 2) validate accuracies of the science data products as specified in the L1 science requirements. This report provides analysis and assessment of the SMAP Level 4 Carbon (L4_C) product pertaining to the validated release. The L4_C validated product release effectively replaces an earlier L4_C beta-product release (Kimball et al. 2015). The validated release described in this report incorporates a longer data record and benefits from algorithm and CalVal refinements acquired during the SMAP post-launch CalVal intensive period. The SMAP L4_C algorithms utilize a terrestrial carbon flux model informed by SMAP soil moisture inputs along with optical remote sensing (e.g. MODIS) vegetation indices and other ancillary biophysical data to estimate global daily net ecosystem CO2 exchange (NEE) and component carbon fluxes for vegetation gross primary production (GPP) and ecosystem respiration (Reco). Other L4_C product elements include surface (10 cm depth) soil organic carbon (SOC) stocks and associated environmental constraints to these processes, including soil moisture and landscape freeze/thaw (FT) controls on GPP and respiration (Kimball et al. 2012). The L4_C product encapsulates SMAP carbon cycle science objectives by: 1) providing a direct link between terrestrial carbon fluxes and underlying FT and soil moisture constraints to these processes, 2) documenting primary connections between terrestrial water, energy and carbon cycles, and 3) improving understanding of terrestrial carbon sink activity in northern ecosystems. There are no L1 science requirements for the L4_C product; however self-imposed requirements have been established focusing on NEE as the primary product field for validation, and on demonstrating L4_C accuracy and success in meeting product science requirements (Jackson et al. 2012). The other L4_C product fields also have strong utility for carbon science applications; however, analysis of these other fields is considered secondary relative to primary validation activities focusing on NEE. The L4_C targeted accuracy requirements are to meet or exceed a mean unbiased accuracy (ubRMSE) for NEE of 1.6 g C/sq m/d or 30 g C/sq m/yr, emphasizing northern (45N) boreal and arctic ecosystems; this is similar to the estimated accuracy level of in situ tower eddy covariance measurement-based observations (Baldocchi 2008).

Cal/Val↗

DOE OSTI2019

Historical perspectives of BEPU research in US

Civilian nuclear energy started in earnest in the 1950s and experienced rapid growth in 1960-80s with increasingly larger reactors. These reactors were initially regulated based on the experience from the smaller reactors, but this could not be applied to the larger power reactors. Therefore, in 1974 the US Nuclear Regulatory Commission set up safety requirements based on defense in depth in 10 CFR 50.46, and set of guidance in 10 CFR 50 presented in Appendix K, for models and simulations of reactor safety analyses, to ensure conservatism in predicted safety parameters. These methods resulted in both conservative safety margins as well as economic and operational penalties. In the late 1970s and early 1980s, a large number of experiential programs provided data that allowed for the creation of best estimate models. These best estimate models showed the conservatism in Appendix K models. In 1988-89, USNRC modified the regulations and allowed the use of best estimate models provided they were coupled to a reliable and defensible measure of uncertainty in the prediction of safety parameters. This change in regulation strongly encouraged global activity for the development of best estimate codes and methods. To aide in this development, the USNRC provided one acceptable approach, the Code Scaling, Acceptability and Uncertainty Evaluation Methodology (CSAU). This approach was later refined in the Evaluation Model Development and Assessment Process (EMDAP).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2018

Notified access in coarray-based hydrodynamics applications on many-core architectures: Design and performance

With the increasing availability of the Remote Direct Memory Access (RDMA) support in computer networks, the so called Partitioned Global Address Space (PGAS) model has evolved in the last few years. Although there are several cases where a PGAS approach can easily solve difficult message passing situations, like in particle tracking and adaptive mesh refinement applications, the producer-consumer pattern, usually adopted in task-based parallelism, can only be implemented inefficiently because of the separation between data transfer and synchronization (which is usually unified in message passing programming models). Here, in this paper, we provide two contributions: (1) we propose an extension for the Fortran language that provides the concept of Notified Access by associating regular coarray variables with event variables. (2) We demonstrate that the MPI extension proposed by foMPI for Notified Access can be used effectively to implement the same concept in a PGAS run-time library like OpenCoarrays. Moreover, for a hydrodynamics mini-application, we found that Fortran 2018 events perform always better than Fortran 2008 sync statements on many-core processors. We finally show how the proposed Notified Access can improve the performance even more.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2020

Influences of North Pacific Ocean Domain Extent on the Western U.S. Winter Hydroclimatology in Variable-Resolution CESM

Variable-resolution global climate models (VRGCMs) are a dynamical downscaling method that can reach spatiotemporal scales needed for regional climate assessments. Over the years, several users of VRGCMs have assumed where the location and extent of the refinement domain should be based on knowledge of the prevailing storm tracks and resolution dependence of important regional climate processes (e.g., atmospheric rivers [ARs] and orographic uplift), but the effect of high-resolution domain size and extent on the simulation of downstream hydroclimatic phenomena has not been systematically evaluated. Here, we use variable resolution in the Community Earth System Model (VR-CESM) to perform such a test. To do this, three VR-CESM grids were generated that span the entire, two thirds, and one third of the North Pacific and evaluated for a 30-year climatology using Atmospheric Model Intercomparison Project protocols. Simulations are compared with reanalysis products offshore (fifth-generation of the European Centre for Medium-Range Weather Forecasts atmospheric reanalysis [ERA5]) and onshore (Livneh, 2015, https://doi.org/10.1038/sdata.2015.42, and Parameter-elevation Regressions on Independent Slopes Model [PRISM]) of the western United States. The westward expansion of refinement domain influenced integrated vapor transport (IVT), which was generally high biased but minimally impacted AR characteristics. Due to slight differences in landfalling AR counts in the western United States, California winter precipitation generally improved with westward expansion of the refinement domain. Western U.S. mountain snowpack and surface temperatures were insensitive to refinement domain size and were more influenced by changes in topographic resolution and/or land surface model version. Here, given minimal dependence of simulated western U.S. hydroclimate on refinement domain size over the North Pacific, we advise future VR-CESM studies to focus grid resolution on better resolving land surface heterogeneity.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Metrics for evaluating tropical cyclones in climate data

This manuscript describes a software suite that can be used for objective evaluation of tropical cyclones (TCs) in gridded climate data. Using cyclone trajectories derived from 6-hourly data, a comprehensive set of metrics is defined to systematically compare and contrast products to one another. In addition to annual TC climatologies, attention is paid to spatial and temporal patterns of storm occurrence and intensity. Assessment can be performed either on the global scale or regional domains. Simple to visualize ‘scorecards’ allow for rapid credibility assessment. We showcase three key findings enabled by this suite. First, we compare the representation of TCs in seven current-generation global reanalyses and conclude that higher resolution models and those with TC-specific assimilation contain more accurate storm climatologies. Second, using a free-running Earth system model (ESM) we find that full basin refinement is required in variable-resolution configurations to adequately simulate North Atlantic TC frequency. Furthermore, upstream refinement over northern Africa offers little benefit in simulating storm occurrence but spatial genesis patterns are improved. Finally, we show that TCs simulated by ESMs can be highly sensitive to individual parameterizations in climate models, with North Atlantic TC metrics varying greatly depending on version of the Morrison-Gettelman microphysics package.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Outlook on Industrial Requirements for Incorporating Nuclear Energy into Industrial Processes

There is an increasing interest globally and in the U.S. in decarbonizing heavy industrial processes which have large demands for heat and power. Currently these industries primarily use fossil fuels to meet these demands and they include: oil & gas, petroleum refining, chemicals and derivative products manufacturing, iron & steel production, polymers, ammonia and fertilizers, etc. The U.S. DOE Integrated Energy Systems (IES) program seeks to identify and analyze opportunities for integrating and substituting nuclear energy to fulfil these large heat and power demands in a cost competitive and sustainable manner while reducing carbon emissions of the processes by using clean nuclear power. Presently various representatives from a subset of these industrial companies have expressed interest in evaluating the options of integrating future advanced nuclear small modular reactors with their industries. This study is a scoping study to provide an outlook of industrial energy demands and the potential nuclear energy substitution potential. Future work will analyze in a more detailed manner the potential designs for coupling advanced nuclear reactors with various industries. The industrial processes of oil refining, methanol production, pulp and paper, ammonia and chlorine-alkali are described focusing on how heat and power is used within the facilities in the context of identifying nuclear substitution opportunities. The aim is to provide reliable, competitive, and sustainable energy that is clean while reducing carbon emissions and other environmental impacts such as water withdrawals, consumption, and contamination.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

NASA NTRS1988

Browsing schematics: Query-filtered graphs with context nodes

The early results of a research project to create tools for building interfaces to intelligent systems on the NASA Space Station are reported. One such tool is the Schematic Browser which helps users engaged in engineering problem solving find and select schematics from among a large set. Users query for schematics with certain components, and the Schematic Browser presents a graph whose nodes represent the schematics with those components. The query greatly reduces the number of choices presented to the user, filtering the graph to a manageable size. Users can reformulate and refine the query serially until they locate the schematics of interest. To help users maintain orientation as they navigate a large body of data, the graph also includes nodes that are not matches but provide global and local context for the matching nodes. Context nodes include landmarks, ancestors, siblings, children and previous matches.

Ciccarelli, Eugene C.↗