Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “geophysical data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Exploring the Use of Non‐Invasive Drone‐Based Ground‐Penetrating Radar (GPR) to Characterize Biogenic Gas Dynamics in Subtropical Peat Soils

Peat soils are a critical component of the global carbon cycle as natural producers of biogenic greenhouse gases (e.g., methane and carbon dioxide) that accumulate within the soil and are released to the atmosphere. Previous studies have showed the ability of ground-based minimally-invasive geophysical methods such as ground-penetrating radar (GPR) to characterize carbon dynamics in peat soils. However, ground-based GPR is limited by scale of measurement and soil disturbance potentially altering gas releases during deployment. Here, we explore the potential of drone-based GPR for identification of hot spots and hot moments of gas accumulation and release in subtropical soils. Here, we collected drone-based GPR data sets across two grids (∼17,500 m 2 ) in the Everglades during January (dry season), September, and November (wet season) of 2023 to characterize peat thickness and seasonal variability of gas content. Results show that drone-based GPR is effective and efficient for: (a) capturing the temporal variation of in situ biogenic gas content in peat soils with changes between 1% and 25 % volumetric gas content over repeatable grids; (b) inferring a total peat thickness between 0.8 and 1.2 m; and (c) estimating flux releases of 63 and 135 mg CH 4 m −2 day −1 for specific locations and periods that are strikingly consistent with our coincident gas trap measurements. This work also indicates that (a) spatial distribution of gas content in the Everglades is strongly controlled by landscape morphology such as ridges and sloughs and (b) the temporal variation of gas content is seasonal with increased gas production during the wet season.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Utah FORGE: Slide-Hold-Slide Experiments on Westerly Granite at Temperatures up to 250 Degrees C

Laboratory slide-hold-slide tests were conducted in a conventional triaxial deformation configuration on 1-inch diameter cylindrical cores of Westerly granite bisected by a sawcut oriented at 30 degrees from vertical. Tests were conducted at a constant confining pressure of 30 MPa with a 10 MPa pore fluid pressure. The pore fluid was deionized water. Experiments were conducted at temperatures of 22, 100, 200, and 250 C. This data was collected to examine fault strength recovery in hydrothermal conditions.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

Calorimetric study of skutterudite (CoAs2.92) and heazlewoodite (Ni3S2)

Abstract Nickel and cobalt arsenides, sulfarsenides, and sulfides occur in many hydrothermal ore deposits, but their thermodynamic properties are not well known, in some cases not known at all. In this work, we determined a full set of thermodynamic properties for heazlewoodite and skutterudite. Both phases were synthesized in evacuated silica tubes at elevated temperatures, and electron microprobe analyses gave their compositions as Ni3S2 and CoAs2.92, respectively. Enthalpies of formation were measured by high-temperature oxide-melt solution calorimetry. The reference phases were pure elements, thus eliminating any systematic errors related to such phases. The enthalpies of formation at T = 298.15 K and P = 105 Pa are –216.0 ± 8.4(2σ) and –88.2 ± 6.1 kJ·mol−1 for Ni3S2 and CoAs2.92, respectively. Entropies were calculated from low-temperature heat capacity (CP) data from relaxation (PPMS) calorimetry and are 133.8 ± 1.6 and 106.4 ± 1.3 J·mol–1·K–1, respectively. The calculated Gibbs free energies of formation are –210.0 ± 8.4 and –79.9 ± 6.2 kJ·mol−1 for Ni3S2 and CoAs2.92, respectively. The PPMS CP data, together with a set of differential scanning calorimetry measurements, were used to derive CP polynomials up to 700 K with the Kieffer model based on previously published frequencies of acoustic and optic modes. Equilibrium constants for selected reactions with an aqueous phase were calculated up to 700 K. Geochemical modeling in these systems, however, should await until more reliable data for other phases from the system Co-Ni-As-S are available.

Geochemistry & Geophysics↗
DOE OSTI2023

DEEPEN 3D PFA Index Models for Exploration Datasets at Newberry Volcano

DEEPEN stands for DE-risking Exploration of geothermal Plays in magmatic ENvironments. As part of the development of the DEEPEN 3D play fairway analysis (PFA) methodology for magmatic plays (conventional hydrothermal, superhot EGS, and supercritical), index models needed to be developed to map values in geoscientific exploration datasets to favorability index values. This GDR submission includes those index models. Index models were created by binning values in exploration datasets into chunks based on their favorability, and then applying a number between 0 and 5 to each chunk, where 0 represents very unfavorable data values and 5 represents very favorable data values. To account for differences in how exploration methods are used to detect each play component, separate index models are produced for each exploration method for each component of each play type. Index models were created using histograms of the distributions of each exploration dataset in combination with literature and input from experts about what combinations of geophysical, geological, and geochemical signatures are considered favorable at Newberry. This is in attempt to create similar sized bins based on the current understanding of how different anomalies map to favorable areas for the different types of geothermal plays (i.e., conventional hydrothermal, superhot EGS, and supercritical). For example, an area of partial melt would likely appear as an area of low density, high conductivity, low vp, and high vp/vs. This means that these target anomalies would be given high (4 or 5) index values for the purpose of imaging the heat source. To account for differences in how exploration methods are used to detect each play component, separate index models are produced for each exploration method for each component of each play type. Index models were produced for the following datasets: - Geologic model - Alteration model - vp/vs - vp - vs - Temperature model - Seismicity (density*magnitude) - Density - Resistivity - Fault distance - Earthquake cutoff depth model

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

Utah FORGE Project 3-2417: Simulations for Distributed Acoustic Sensing Strain Signatures as an Indicator of Fracture Connectivity

This dataset encompasses simulations of strain signatures from both hydraulically connected and "near-miss" fractures in enhanced geothermal systems (EGS). The files and results are presented from the perspective of digital acoustic sensing's (DAS) potential to differentiate the two fracture types. This dataset was acquired by the FOGMORE R&D project (Fiber Optic Geophysical MOnitoring of Reservoir Evolution), under Utah FORGE R&D Project 3-2417. Included are simulation and results via MatLab and COMSOL files, as well as a thesis and paper summarizing the results. Some stimulated fractures may be incomplete, approaching but not intersecting the production well. These "near-miss" fractures can be addressed in future stimulation stages or re-stimulated to complete the connection. We propose the use of fiber optic distributed acoustic sensing (DAS) as a method by which near-miss stimulated fractures may be identified and distinguished from hydraulically connected fractures. The low-frequency sub-nanostrain signatures of both complete and near-miss fractures in DAS data are simulated in this study using a hydrogeomechanical discrete fracture network model. The spatial distribution of strain was found to be an accurate indicator. However, this indicator must be evaluated in the context of DAS gauge length and spatial sampling. These simulations are a precursor to tests conducted at FORGE in 2023.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

The Lithophile Element Budget of Earth's Core

Abstract The relative composition of Earth's core and mantle were set during core formation. By determining how elements partition between metal and silicate at high pressures and temperatures, measurements of the mantle composition and geophysical observations of the core can be used to understand the mechanisms by which Earth formed. Here we present the results of metal‐silicate partitioning experiments for a range of nominally lithophile elements (Al, Ca, K, Mg, O, Si, Th, and U) and S to 85 GPa and up to 5400 K. With our results and a compilation of literature data, we developed a parameterization for partitioning that accounts for compositional dependencies in both the metal and silicate phases. Using this parameterization in a range of planetary growth models, we find that, in general, lithophile element partitioning into the metallic phase is enhanced at high temperatures. The relative abundances of FeO, SiO 2 , and MgO in the mantle vary significantly between planetary growth models, and the mantle abundances of these elements can be used to provide important constraints on Earth's accretion. To match Earth's core mass and mantle composition, Earth's building blocks must have been enriched in Fe and depleted in Si compared with CI chondrites. Finally, too little Mg, Si, and O are partitioned into the core for precipitation of oxides to be a major source of energy for the geodynamo. In contrast, several ppb of U can be partitioned into the core at high temperatures, and this energy source must be accounted for in thermal evolution models.

Chidester, B. A.↗
DOE OSTI2020

Subtask 1.5 – CO2 Injection Monitoring with an Optimized Scalable, Automated, Semipermanent Seismic Array

The scalable, automated, semipermanent seismic array (SASSA) method is a flexible and relatively cost-effective surface geophysical method for regular time-lapse monitoring of the movement of injected carbon dioxide (CO2) in a reservoir for CO2 enhanced oil recovery (EOR) or geologic CO2 storage operations. It has the advantages of a low-environmental-footprint while monitoring regions of a reservoir from the surface without the need for a regular grid distribution of receivers. Automated data collection is possible. As only time-lapse amplitude changes at the reservoir level due to CO2 movement within the reservoir are monitored, the turnaround time to deliver results from the SASSA method can be short, without the need for long, time-consuming data-processing workflows. As data is collected and processed, incremental information can be provided to the field operator. The Energy & Environmental Research Center (EERC) conducted a SASSA field test from September 2018 to November 2020 in a portion of the Bell Creek Field in Montana, which implemented new CO2 EOR field activities during the study period. Lessons learned from a proof-of-concept study were incorporated to improve the data quality of the SASSA method and demonstrate the viability of the technology. The EERC implemented several enhancements to improve data quality, including 1) an iterative survey design, which allowed placing the receivers in strategic locations where the movement of the CO2 in the reservoir could be tracked with minimum interference by the cultural noise in the study area; 2) the use of powerful seismic sources in the form of surface orbital vibrators, and 3) data acquisition during optimal periods. History-matched reservoir simulation was performed to predict gas saturation and pressure response induced by CO2 injection in the study area. The results were compared with the SASSA-measured responses to CO2 injection as a partial validation technique. A match between the two methods was observed for most of the SASSA points predicted to have intersected a CO2 saturation change. The validated results provide confidence that the SASSA method can be used independently as a CO2 saturation monitoring technique. As data are collected and processed, incremental information can be provided to the field operator. The critical components of the SASSA workflow for a successful application of the method are the following: Iterative survey design with information about CO2 injection activities from the oilfield operator. A detailed CO2 injection plan is the key driver to select the strategic monitoring location of the SASSA sensors. After this information is incorporated in the initial distribution of sources and receivers in the study area, high-resolution satellite images are used to identify ground locations not affected by cultural noise sources, such as power lines, pipelines/flow lines, or roadways. In the next iteration of the survey design, a scouting trip to the study area is needed to understand more details of the noise sources identified in the previous step and the intensity of the field activities that can also generate noise during the monitoring. Integrating the information from the scouting trip into the survey design to select the optimum source and receiver locations is the final step. Noise attenuation. The variety of noise types during seismic monitoring of an oil field is enormous. Tailored noise characterization and processing at a node-by-node level can enhance the performance and sensitivity of the SASSA technique. Future advancements that could improve the efficiency and application of the SASSA technology include: Gaining a better understanding of the noise field produced by the seismic source to aid the choice of receiver location. Surface noise from the source can overwhelm the small signal changes due to CO2 that the SASSA method measures. Improved data-processing workflow to automatically analyze and adapt to dynamic noise conditions associated with industrial settings. This subtask was funded through the EERC–DOE Joint Program on Research and Development for Fossil Energy-Related Resources Cooperative Agreement No. DE- FE0024233.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Utah FORGE 3-2417: Fiber-Optic Geophysical Monitoring of Reservoir Evolution - 2024 Annual Workshop Presentation

This is a presentation on the Fiber-Optic Geophysical Monitoring of Reservoir Evolution by Rice University, presented by Jonathan Ajo-Franklin. This video slide presentation discusses the development of an end-to-end fiber-optic sensing approach for EGS to track the (1) initial zone of fracture creation, (2) zones of connected mechanically compliant fractures, (3) zones of flowing fractures, and (4) the integration of the data into an improved THM model. This presentation was featured in the Utah FORGE R&D Annual Workshop on August 13, 2024.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

Preliminary report on applications of machine learning techniques to the Nevada play fairway analysis

We are applying machine learning (ML) techniques, including training set augmentation and artificial neural networks, to mitigate key challenges in the Nevada play fairway project. The study area includes ~85 active geothermal systems as potential training sites and >12 geologic, geophysical, and geochemical features. The main goal is to develop an algorithmic approach to identify new geothermal systems in the Great Basin region. Major objectives include: 1) integrate ML techniques into the geothermal community; 2) develop open community datasets, whereby all play fairway and ML datasets and algorithms are publicly released and available for modification by various user groups; 3) identify data acquisition targets with high value for future work; 4) identify new signatures to detect blind geothermal systems; and 5) foster new capabilities for characterizing subsurface temperature and permeability. Initially, ML techniques are being applied to the same play fairway datasets and workflow. ML will then be applied to both enhanced and additional datasets, with modification of the PFA workflow to incorporate the new datasets. Finally, ML will be applied to define new workflows using the enhanced and additional datasets. An algorithmic approach that empirically learns to estimate weights of influence for diverse parameters can potentially scale and perform better than the play fairway analysis. Initial work on this project has involved 1) evaluating potential positive and negative training sites, 2) transformation of datasets into formats suitable for ML, and 3) initial development and testing of ML techniques.

58 GEOSCIENCES↗
DOE OSTI2024

Global Geo-processed Data of Aquifer Properties by 0.5° Grid, Country and Water Basins

This repository of global hydrogeologic datasets contains aquifer properties on 0.5° scale, including depth to groundwater (Fan et al., 2013), aquifer thickness (de Graaf et al., 2015), WHYMap aquifer classes (Richts et al., 2011), porosity and permeability (Gleeson et al., 2014), digitized and geo-processed from their respective sources. Globally gridded aquifer properties could be used independently to estimate global groundwater availability or used as critical inputs to the superwell model to simulate groundwater extraction and provide estimates of pumped volumes and unit costs under user-specific scenarios. Key resources related to this data are: Niazi, H., Ferencz, S., Graham, N., Yoon, J., Wild, T., Hejazi, M., Watson, D., & Vernon, C. (2024; In-prep). Long-term Hydro-economic Assessment Tool for Evaluating Global Groundwater Cost and Supply: Superwell v1. Geoscientific Model Development. superwell model repository which uses this data to simulate groundwater extraction and provides estimates of the global extractable volumes and unit-costs ($/km3) of accessible groundwater production under user-specified extraction scenarios. Repository Overview Main output: aquifer_properties.csv contains all processed outputs, including aquifer properties like porosity, permeability, aquifer thickness, and depth to groundwater. shapefiles.zip: contains all digitized GIS databases and shapefile for all aquifer properties prep_inputs.R: R script that processes the shapefiles to produce the aquifer_properties file plot_inputs.R: R script for plotting the maps and conducting preliminary analysis on the available groundwater volume basin_to_country_mapping.csv, basin_country_region_mapping.csv and continent_county_mapping.csv provide the mapping between continents, 32 energy-economic macro regions, countries, and water basins for post-processing aquifer_properties.csv Maps: Each map visualizes the spatial distribution of one of the aquifer properties across the globe map_in_Porosity.png map_in_Permeability.png map_in_Aquifer_thickness.png map_in_Depth_to_water.png map_in_Grid_area_km.png map_in_WHYClass.png Sample inputs sample_inputs.py: this script samples inputs from the aquifer_properties dataset, ensuring the sampled and original inputs maintain the same distributions sampled_data_100.csv contains 100 sampled data points and sampled_data_100.png compares their distributions Dataset Overview The main outputs are consolidated in a comprehensive aquifer_properties.csv file and include the following fields: GridCellID: Unique identifier for each (roughly 0.5°) grid cell Continent: Continent name Country: Country name GCAM_basin_ID: Identifier for GCAM hydrologic basin Basin_long_name: Full name of the basin WHYClass: Hydrogeologic classification based on WHYMap aquifer classes (Richts et al., 2011) Porosity: Soil porosity (%) (Gleeson et al., 2014) Permeability: Soil permeability (in square meters; Gleeson et al., 2014) Aquifer_thickness: Thickness of the aquifer (in meters; de Graaf et al., 2015) Depth_to_water: Depth to groundwater (in meters; Fan et al., 2013) Grid_area: Area of the grid cell (in square meters) Key References The datasets are digitized versions of global hydrogeologic properties from the following key literature sources: Depth to Groundwater: Fan, Y., Li, H., & Miguez-Macho, G. (2013). Global Patterns of Groundwater Table Depth. Science, 339(6122), 940-943. https://doi.org/10.1126/science.1229881 Aquifer Thickness: de Graaf, I. E. M., Sutanudjaja, E. H., van Beek, L. P. H., & Bierkens, M. F. P. (2015). A high-resolution global-scale groundwater model. Hydrol. Earth Syst. Sci., 19(2), 823-837. https://doi.org/10.5194/hess-19-823-2015 Porosity and Permeability: Gleeson, T., Moosdorf, N., Hartmann, J., & van Beek, L. P. H. (2014). A glimpse beneath earth's surface: GLobal HYdrogeology MaPS (GLHYMPS) of permeability and porosity. Geophysical Research Letters, 41(11), 3891-3898. https://doi.org/10.1002/2014GL059856 Aquifer classes: Richts, A., Struckmeier, W. F., & Zaepke, M. (2011). WHYMAP and the Groundwater Resources Map of the World 1:25,000,000. In J. A. A. Jones (Ed.), Sustaining Groundwater Resources: A Critical Element in the Global Water Crisis (pp. 159-173). Springer Netherlands. https://doi.org/10.1007/978-90-481-3426-7_10 Cite as Niazi, H., Watson, D., Hejazi, M., Yonkofski, C., Ferencz, S., Vernon, C., Graham, N., Wild, T., & Yoon, J. (2024). Global Geo-processed Data of Aquifer Properties by 0.5° Grid, Country and Water Basins. MSD-LIVE Data Repository. https://doi.org/10.57931/2307831 Contact Reach out to Hassan Niazi or open an issue in superwell repository for questions or suggestions.

aquifer thickness↗
DOE OSTI2021

A Data-Driven Framework for Automated Detection of Aircraft-Generated Signals in Seismic Array Data Using Machine Learning

Abstract Ground motions associated with aircraft overflights can cover a significant portion of the seismic data collected by shallowly emplaced seismometers, such as new nodal and Distributed Acoustic Sensing systems. This article describes the first published framework for automated detection of aircraft on single channel and multichannel seismic data. The seismic data are converted to spectrograms in a sliding time window and classified as aircraft or nonaircraft in each window using a deep convolutional neural network trained with analyst-labeled data. A majority voting scheme is used to convert the output from the sequence of sliding time windows onto a decision time sequence for each channel and to combine the binary classifications on the decision time sequences across multiple channels. Precision, recall, and F-score are used to quantify the detection performance of the algorithm on nodal data using fourfold time-series cross validation. By applying our framework to data from the Sage Brush Flats nodal array in Southern California, we provide a benchmark performance and demonstrate the advantage of using an array of sensors.

Geochemistry & Geophysics↗
DOE OSTI2020

Integrated Approach to Investigating Historic Cemeteries

Ground-penetrating radar (GPR) and terrestrial laser scanning (TLS) surveys were conducted at a historic cemetery at Cape Canaveral Air Force Station, Florida, U.S., in order to confirm the presence of burials corresponding to grave markers and detect potential unmarked burials. Noise in the GPR data from surface features and subtle terrain differences must be addressed to determine the extent of anomalies of interest. We use singular value decomposition (SVD) to isolate and remove energy from GPR data. SVD allows one to remove unwanted signals that traditional processing techniques cannot. With SVD filtering, we resolve an anomaly adjacent to confirmed burials otherwise overprinted by unwanted signal. The migration of SVD-filtered data produces more distinct, spatially constrained point reflectors. Ground elevation is derived from georeferenced TLS data and compared to that from airborne laser scanning (ALS) to highlight subtle terrain that can assist data interpretation. TLS elevations show a subtle modern mound over the burial plot where ALS elevations show a depression. The targets of interest are approximately 20–30 cm higher in elevation if a topographic correction is performed using TLS versus ALS. In archaeological applications, a notable change is often recorded at the sub-meter scale. The combined approach presented here better resolves geophysical response of buried features and their positions in the ground relative to each other.

Downs, Christine (ORCID:0000000237229381)↗
DOE OSTI2020

Detailed space–time variations of the seismic response of the shallow crust to small earthquakes from analysis of dense array data

SUMMARY We compute high-resolution space–time variations of subsurface seismic properties from autocorrelation functions (ACF’s) of noise and local earthquakes, recorded by the Sage Brush Flat dense array deployed around the Clark branch of the San Jacinto fault. The resolved temporal changes are referred to as apparent velocity changes because they reflect both nonlinear response and variations of material properties such as cracking and damage. Apparent velocity changes are estimated at four frequency bands (10–15, 10–20, 15–30 and 20–40 Hz) for two local earthquake data sets. In one analysis, ACF’s from P- and S-wave windows of 31 small events with magnitudes below 3.1 are used to compute the apparent velocity variations with respect to the mean ACF of each phase, and we also use the mean ACF of noise data as reference to estimate the changes. In a further analysis, the temporal evolution of properties is computed using moving time windows in continuous waveform over one-hour long data with noise and earthquake signals. The apparent velocity changes and recovery times are frequency dependent and present a strong spatial variability across the array. The resolved changes are larger and recovery time shorter with data associated with higher frequencies. At frequencies larger than 15 Hz, and using the mean ACF of noise data as a reference, the apparent average velocity changes across the array during the passage of the P and S waves from the small local events are 2.5 per cent and 6 per cent, respectively. The apparent velocity changes decrease by one order of magnitude when the earthquake data are used as a reference. The relatively large changes in response to very low ground motion have important implications on nonlinear processes involving degradation and healing of the subsurface material during common earthquake shaking.

Geochemistry & Geophysics↗
DOE OSTI2024

Utah FORGE: Composite 3D Seismic Velocity Model

This is a composite 3D seismic velocity that was constructed from compiled information from several local studies regarding seismic velocities and structural information. This seismic velocity model is provided in NonLinLoc format (slow_len), which is readily usable in NonLinLoc software. Other model formats and versions of the model can be produced using the Python script provided with this data set. Details on how the model was created and prior velocity and structural information was used is provided in the accompanying documentation.

15 GEOTHERMAL ENERGY↗
DOE OSTI2021

Persistent, “Mysterious” Seismoacoustic Signals Reported in Oklahoma State during 2019

Here, we report on the source of seismoacoustic pulses that were observed across the state of Oklahoma (OK) during summer of 2019, and the subject of national media coverage and speculation. Seismic network data collected across four U.S. states and interviews with witnesses to the pulse’s effect on residential structures demonstrate that they were triggered by routine ammunition disposal operations conducted by McAlester Army Ammunition Plant (McAAP). During these operations, conventional explosives destroy obsolete munitions stored in pits through a controlled sequence of electronically timed shots that occur over tens of minutes. Despite noise-abatement efforts that reduce coupling of acoustic energy with air, some lower frequency, subaudible (infrasonic) sound radiates from these shots as discrete pulses. We use nine months of blast log documents, seismic network records, analyst picks, and physical modeling to demonstrate that seismic stations as far as 640 km from McAAP sample these pulses, which record seasonal patterns in stratospheric and tropospheric winds, as well as the dynamic formation of waveguides and shadow zones. Digital short-term average to long-term average detectors that we augment with dynamic thresholds and time-binning operations identify these pulses with a fair probability, when compared with visual observations. Our analyses thereby provide estimates of observation rates for both partial and full sequences of these pulses, as well as single shots. We suggest that disposal operations can exploit existing, composite seismic networks to predict where residents are likely to witness blasting. Crucially, our data also show that dense seismic networks can record multiscale atmospheric processes in the absence of infrasound arrays.

58 GEOSCIENCES↗
DOE OSTI2021

Sound velocities of iron-nickel (Fe90Ni10) alloy up to 8 GPa and 773 K: The effect of nickel on the elastic properties of bcc-iron at high P-T

Sound velocities of iron and iron-based alloys at high pressure and high temperature are crucial for understanding the composition and structure of Earth’s and other telluric planetary cores. In this study, we performed ultrasonic interferometric measurements of both compressional (ν P ) and shear (ν S ) velocities on a polycrystalline body-centered-cubic (bcc)-Fe 90 Ni 10 up to 8 GPa and 773 K. The elastic moduli and their pressure and temperature derivatives are derived from least-square fits to third-order finite strain equations, yielding K S0 = 154.2(8) GPa, G 0 = 73.2(2) GPa, K' S0 = 4.6(2), G' 0 = 1.5(1), ∂K S /∂T = –0.028(1) GPa/K, and ∂G/∂T = –0.023(1) GPa/K. Furthermore, a comparison with literature data on bcc-Fe suggests that nickel not only decreases both P and S wave velocities but also weakens the temperature effects on the elastic moduli of Fe-Ni alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Seismic response to paleo-sand dunes in the Nugget Sandstone Formation, southwestern Wyoming

We have analyzed a 3D seismic survey acquired for a carbon sequestration project on top of the Moxa Arch in southwestern Wyoming. We observed a zone of discontinuous reflectors on vertical slices of seismic amplitude volume, whereas, the northwest–southeast lineations were observed on the time slices. We performed a seismic to well tie that suggested that the lineations occur within the Nugget Sandstone. The Nugget Sandstone is an eolian sandstone deposit of Early Jurassic age, deposited as a subtropical dune field, and equivalent to the Navajo Sandstone of southwestern Utah. Petrophysical analysis indicates that the Nugget Sandstone is dominated by clean sandstone (70%–80%), whereas evaporites, including halite and anhydrite, are present in certain zones. Previous outcrop studies on the Navajo Sandstone indicate the wind direction to be predominantly northeast–southwest. Seismic attributes, including coherence and curvature, displayed on stratal slices within the Nugget Sandstone interval indicate the presence of lineations in the northwest–southeast direction with irregular spacing. These lineations are approximately perpendicular to the inferred dominant wind direction. We computed the dominant wind direction from the average azimuth of the lineations as seen on the curvature attribute in the Nugget Sandstone interval. Geological feature: Eolian sand dunes with interdunal evaporites Seismic appearance: Parallel lineations with irregular spacing on seismic attribute horizon slices Alternative interpretations: Canyons at continental slopes; slope failures Features with a similar appearance: Marine bars; contourites Formation: The Nugget Sandstone — equivalent to the Navajo Sandstone Age: Early Jurassic Location: Moxa Arch, Wyoming Seismic data: Obtained by the University of Wyoming with U.S. DOE funding Contributors: Dhruv Agrawal, Brady Lujan, Sumit Verma, Shuvajit Bhattacharya, and Subhashis Mallick Analysis tools: Coherence and curvature attributes; seismic inversion; petrophysical inversion

Geochemistry & Geophysics↗
DOE OSTI2024

ML-Based Rock Properties and Seismic Volume Enhancement

This project aims to improve field-scale Carbon Capture and Storage (CCS) assessments by enhancing petrophysical and geophysical log predictions through machine learning and neural networks. In our work during EY23, we applied Conditional Variational Autoencoders (CVAEs) to predict compressional velocity (Vp) and assess CO2 saturation levels in geological formations at the Illinois Basin Decatur Project (IBDP). In another task, we improved full-waveform inversion (FWI) methods with machine-learning approaches using lithological constraints. Full-waveform inversion (FWI) of seismic data estimates the elastic properties of subsurface rocks with high spatial resolution.

Nathanail, Athanasios↗