Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “frequency deviation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Multi-Time Scale Coordinated Control and Scheduling of Inverter-Based TCLs With Variable Wind Generation

To address microgrid tie flow errors caused by wind generation variability, here we propose and develop a multi-time scale coordinated control and scheduling strategy for inverter-based thermostatically controlled loads (TCLs). First, in hour-time scale, inverter-based TCLs with adjusting temperature set-point are modeled as virtual generators to compensate tie flow deviations in the day-ahead plan. Next, in minute-time scale, virtual batteries representing operating behaviors of inverter-based TCLs with frequency control are scheduled determined by the control of virtual generators in hour-time scale. The virtual batteries are scheduled to smooth out tie flow errors corresponding to day-ahead plan and hour-time scale schedules. The multi-time scale control methods are coordinated to employ the response potential of inverter-based TCLs and response curve-based methods are proposed to control inverter-based TCLs considering the customer privacy. The multi-time scale stochastic schedules which are based on response curves of inverter-based TCLs are coordinated to accommodate wind generation variability. Simulation results demonstrate that the microgrid tie flow errors are effectively mitigated by the proposed multi-time scale coordinated control and scheduling of inverter-based TCLs.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2020

NGEE Arctic Soil Micro-warming Experiment Temperature Profiles, Council Road Mile Marker 71, Seward Peninsula, Alaska, 2017-2019

The reported soil temperature profile measurements (24 locations - 2 probes with 5 and 6 thermistors, respectively - Fig. 1 and Fig. 2) were initiated as part of a soil micro-warming experiment at the Council Road Mile Marker 71 Site (CN_MM71) in September 2017. From 2017 through August 2019, these were measurements of ambient pre-treatment plot conditions. This tussock tundra site (with underlying permafrost) experiences annual frost heaving that causes a vertical movement of the ground surface, hence causing some of the upper most temperature thermistors to be at surface level or above ground and recorded therefore air temperatures near the surface and not below ground soil temperature (see section on Quality Assurance). After August 2019, these measurements ended in preparation for transitioning to the experimental warming of individual plots. The reported temperature data are nominally 3-hour averages of measurements made at varying frequencies (3-hour maximum) with frequencies that depended upon power (solar) availability to operate the sensors (see section in documentation on Methods). The number of values and the standard deviation for each 3-hour average (where appropriate) are also provided. These measurements are located near the NGEE-Arctic CO2 and CH4 eddy covariance tower at the Council Road Site (US-NGC: NGEE Arctic Council, https://ameriflux.lbl.gov/sites/siteinfo/US-NGC#overview) and auxiliary data at https://doi.org/10.5440/1526749. This dataset contains four *.csv files and one *.pdf file. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1983

Optimizing a remote sensing instrument to measure atmospheric surface pressure

Atmospheric surface pressure can be remotely sensed from a satellite by an active instrument which measures return echoes from the ocean at frequencies near the 60 GHz oxygen absorption band. The instrument is optimized by selecting its frequencies of operation, transmitter powers and antenna size through a new procedure baesd on numerical simulation which maximizes the retrieval accuracy. The predicted standard deviation error in the retrieved surface pressure is 1 mb. In addition the measurements can be used to retrieve water vapor, cloud liquid water and sea state, which is related to wind speed.

Peckham, G. E.↗
NASA NTRS1994

Theoretical, Experimental, and Computational Evaluation of Several Vane-Type Slow-Wave Structures

Several types of periodic vane slow-wave structures were fabricated. The dispersion characteristics were found by theoretical analysis, experimental testing, and computer simulation using the MAFIA code. Computer-generated characteristics agreed to approximately within 2 percent of the experimental characteristics for all structures. The theoretical characteristics, however, deviated increasingly as the width to height ratio became smaller. Interaction impedances were also computed based on the experimental and computer-generated resonance frequency shifts due to the introduction of a perturbing dielectric rod.

Wallett, Thomas M.↗
NASA NTRS1994

Surface gravity waves at equilibrium with a steady wind

Observations of wave fields' spatial evolution and of gravity wave spectra S(sub omega) are analyzed on the basis of the data reported by several research groups as well as on a 2-year data set of wind and wave measurements by stationary National Oceanic and Atmospheric Administration buoys near the Hawaiian Islands. We seek to clarify the role of the wave energy advection (with the wave group velocity) in the overall energy balance. This advective transfer appears to be no less important than the local (breaking wave induced) dissipation as a factor of wind-wave equilibrium. The advection is found to manifest itself in the shape of wave spectra by reducing the rate at which the spectra density of the wave energy, S(sub omega approximately omega (exp -p), falls off as the frequency increases away from the spectra peak. This and other conclusions are derived by comparing the field observations with theoretical predictions of the weak turbulence theory for a spatially inhomogeneous, statistically stationary, wave field. The observations also indicate that the typical wave age xi = C(sub 0)/U in the open ocean is much greater than the limiting value 1.2 attributed to the 'fully developed sea.' Although the observed spectra can be approximated by a power law with a single 'effective' exponent, this apparent exponent, p, is found to depend on the wave age. At high xi and at frequencies below the generation range, -p tends to -3 rather than the value of -11/3 predicted by the Zakharov-Zaslavskii theory. This deviation is interpreted as pointing to a nonconservative nature of the inverse cascade, the latter including a leakage of energy to low-wavenumber modes. Dependence of the overall effective exponent on xi is shown to be responsible for variation in the coefficients b, B, c, C appearing in empirical fetch laws, such as xi = C bar-x (exp c) and e = B bar-x (exp B), where bar-x and e are the dimensionless fetch and wave energy, respectively.

Glazman, Roman E.↗
NASA NTRS2010

Dispersion of Sound in Dilute Suspensions with Nonlinear Particle Relaxation

The theory accounting for nonlinear particle relaxation (viscous and thermal) has been applied to the prediction of dispersion of sound in dilute suspensions. The results suggest that significant deviations exist for sound dispersion between the linear and nonlinear theories at large values of Omega(Tau)(sub d), where Omega is the circular frequency, and Tau(sub d) is the Stokesian particle relaxation time. It is revealed that the nonlinear effect on the dispersion coefficient due to viscous contribution is larger relative to that of thermal conduction

Kandula, Max↗
NASA NTRSDate not supplied

Comparison of Corcos-based and experimentally-derived coherence factors for BFFs estimation

In this paper, high-spatial-resolution unsteady Pressure Sensitive Paint (uPSP) data are utilized to compare two methods for panel Buffet Forcing Functions (BFF) estimation for the Space Launch System (SLS). Such methods are based on discrete pressure measurements within a panel but employ coherence factors to account for partially-correlated fluctuating pressures across the whole panel. In one method, coherence factors are derived based on the Corcos model, whereas the second method utilizes experimentally-derived coherence factors. To simulate discrete measurements using uPSP data, suitable subsets of the data are extracted. When full uPSP resolution is retained, uPSP data provide a benchmark to assess discrete-measurements-based methods. The analysis focuses on the peak SLS buffet environment located downstream of the Forward Attachment Hardware (FAH) between the core stage and solid rocket boosters. Trends of Corcos-based and experimentally-derived coherence factors are in reasonable agreement with the benchmark. However, at certain frequencies, experimentally-derived coherence factors are sensitive to the separation distance between pressure measurements utilized to compute coherence lengths. Such sensitivity originates from deviation of the experimental-based coherence function from an exponential decay assumption. On the other hand, the present implementation of the Corcos model fails to capture certain non-turbulent boundary layer related environments, such as a subharmonic of FAH vortex-shedding. For all methods presented in this paper, at near transonic conditions, increased pressure coherence and spatial nonuniformity lead to BFF overestimation and sensitivity to the pressure measurement location within the panel.

transonic buffet↗
NASA NTRSDate not supplied

Comparison of Corcos-Based and Experimentally-Derived Coherence Factors for Buffet Forcing Functions Estimation

In this paper, high-spatial-resolution unsteady Pressure Sensitive Paint (uPSP) data are utilized to compare two methods for panel Buffet Forcing Functions (BFF) estimation for the Space Launch System (SLS). Such methods are based on discrete pressure measurements within a panel but employ coherence factors to account for partially-correlated fluctuating pressures across the whole panel. In one method, coherence factors are derived based on the Corcos model, whereas the second method utilizes experimentally-derived coherence factors. To simulate discrete measurements using uPSP data, suitable subsets of the data are extracted. When full uPSP resolution is retained, uPSP data provide a benchmark to assess discrete-measurements-based methods. The analysis focuses on the peak SLS buffet environment located downstream of the Forward Attachment Hardware (FAH) between the core stage and solid rocket boosters. Trends of Corcos-based and experimentally-derived coherence factors are in reasonable agreement with the benchmark. However, at certain frequencies, experimentally-derived coherence factors are sensitive to the separation distance between pressure measurements utilized to compute coherence lengths. Such sensitivity originates from deviation of the experimental-based coherence function from an exponential decay assumption. On the other hand, the present implementation of the Corcos model fails to capture certain nonturbulent boundary layer related environments, such as a subharmonic of FAH vortex-shedding. For all methods presented in this paper, at near transonic conditions, increased pressure coherence and spatial nonuniformity lead to BFF overestimation and sensitivity to the pressure measurement location within the panel.

buffet↗
NASA NTRS2023

Comparison of Corcos-Based and Experimentally-Derived Coherence Factors for Buffet Forcing Function Estimation

In this paper, high-spatial-resolution unsteady Pressure Sensitive Paint (uPSP) data are utilized to compare two methods for panel Buffet Forcing Function (BFF) estimation for the Space Launch System (SLS). Such methods are based on discrete pressure measurements within a panel but employ coherence factors to account for partially-correlated fluctuating pressures across the whole panel. In one method, coherence factors are derived based on the Corcos model, whereas the second method utilizes experimentally-derived coherence factors. To simulate discrete measurements using uPSP data, suitable subsets of the data are extracted. When full uPSP resolution is retained, uPSP data provide a benchmark to assess discrete-measurement-based methods. The analysis focuses on the peak SLS buffet environment located downstream of the Forward Attachment Hardware (FAH) between the core stage and solid rocket boosters. Trends of Corcos-based and experimentally-derived coherence factors are in reasonable agreement with the benchmark. However, at certain frequencies, experimentally-derived coherence factors are sensitive to the separation distance between pressure measurements utilized to compute coherence lengths. Such sensitivity originates from deviation of the experimentally-based coherence function from an exponential decay assumption. On the other hand, the present implementation of the Corcos model fails to capture certain nonturbulent boundary layer related environments, such as a subharmonic of FAH vortex-shedding. For all methods presented in this paper, at near transonic conditions, increased pressure coherence and spatial nonuniformity lead to BFF overestimation and sensitivity to the pressure measurement location within the panel.

transonic buffet↗
DOE OSTI2026

Validation of an Erythema-Weighted UV Model Using Broadband Solar Irradiance Measurements From Eleven U.S. Sites: Preprint

Erythema-weighted UV solar irradiance (UV-E) has a potential impact on human health if the recommended maximum exposure times are exceeded. In spite of this, it is not measured at most sites that measure Global Horizontal Irradiance (GHI). However, since UV-E is highly correlated with GHI and total ozone content it can be estimated from this information with sufficient accuracy to assisst in public health recommendations. The Power Model (PM) provides a simple method to estimate the erythema-weighted UV irradiance (UV-E) from measured GHI, total ozone column and air mass. In this work, the performance of the PM method is assessed using high-quality data from 11 sites in the continental U.S. (part of SURFRAD and SOLRAD networks) and total ozone estimates publicly available from the MERRA-2 re-analysis database. A three year period (2021- 2023) at 1-minute frequency is considered. The results (for time aggregations of 5 and 60 minutes) show a high Pearson's correlations (> 0.99), consistently positive mean bias deviations (below 13%) and dispersions in the 8-19% range at all sites. Relative values are expressed in terms of the corresponding measurement mean. The performance indicators remain consistent across time resolutions (5 or 60 minutes), suggesting that the model's performance is robust and not significantly affected by short-term variability (which is captured by GHI). Spatial patterns reveal higher biases and RMSD in northern and eastern locations. These values represent a significant improvement over widely used satellite-based global UV-E estimates and open the possibility of using the PM with satellite-based GHI estimates for operational UV-E mapping over the contiguous U.S. territory.

14 SOLAR ENERGY↗
NASA NTRS2018

Radio Science System Design and Measurement Results for the NASA Deep Space Network (DSN)

Radio science measurements have been performed using the NASA Deep Space Network (DSN) with many different spacecraft over several decades. Radio science has been used for the study of planetary atmospheres, the solar corona and the search for gravity waves, among other things. The majority of these measurements are made using the X and Ka-band deep space bands. Although the primary mission for the DSN is tracking, telemetry and command (TT&C) for NASA’s many deep-space spacecraft, radio science measurements continue to be an important secondary mission. The science requirements for these measurements have resulted in stringent performance requirements for both the spacecraft and ground system equipment. In particular, the requirements for amplitude stability, phase stability (Allen deviation) and phase noise are very demanding. The system Allen deviation requirement at Ka-band is < 2.4 E-15 over 1000 seconds, while the phase noise requirement is < -50 dBc/Hz for a 1 Hz offset. Various design techniques have been used for the DSN radio frequency (RF) electronics, high power transmitters and antenna structures to meet the stringent requirements for all 3 of these parameters. Some details for the design techniques will be described in the paper. Another important consideration for a radio science system is the verification approach for components, as well as for individual subsystems and then the overall system. Phase-locked oscillators (PLOs) are one of the key component types that determine overall phase noise and Allen deviation system performance. Measurement techniques used for PLOs, as well as for the overall ground system, will be discussed. Measurement results for the 2 new DSN antennas, recently built under the DSN Aperture Enhancement Project (DAEP) will also be shown. In addition, some recent radio science measurements from the Cassini and JUNO missions, using the new antennas, will be presented.

LaBelle, Remi C.↗
NASA NTRS1994

Evaluation of the TOPEX/POSEIDON dual-frequency ionosphere correction

The NASA altimeter on board TOPEX/POSEIDON exploits the difference in the delays of the Ku and C band radar pulses to estimate an ionosphere correction to the range measurement. The dependence of the ionosphere correction on ocean and satellite parameters is less than 1 cm. The standard deviation of the 1-s averaged ionosphere correction depends on the height of the ocean waves and ranges from 5 to 14 mm. The accuracy of the ionosphere correction is better than 1 cm at the 1 sigma confidence level. The ionosphere correction should be averaged over 140 km (20 s) along track in order to minimize its noise without sacrificing its accuracy. Ionosphere models must achieve an independent sample spacing of 900 km or less in order to allow a single-frequency altimeter to have an ionosphere correction comparable in accuracy to that of the NASA dual-frequency altimeter.

Imel, David A.↗
NASA NTRS1990

Aircraft microwave observations and simulations of deep convection from 18 to 183 GHz. I - Observations

Aircraft passive microwave observations of deep atmospheric convection at frequencies between 18 and 183 GHz are presented in conjunction with visible and infrared satellite and aircraft observations and ground-based radar observations. Deep convective cores are indicated in the microwave data by negative brightness temperature, T/(B) deviations from the land background (270 K) to extreme T(B) values below 100 K at 37, 92, and 183 GHz and below 200 K at 18 GHz. These T(B) minima, due to scattering by ice held aloft by the intense updrafts, are well correlated with areas of high radar reflectivity. For this land background case, T(B) is inversely correlated with rain rate at all frequencies due to T(B)-ice-rain correlations. Mean Delta-T between vertically polarized and horizontally polarized radiance in precipitation areas is approximately 6 K at both 18 GHz and 37 GHz, indicating nonspherical precipitation-size ice particles with a preferred horizontal orientation. Convective cores not observed in the visible and infrared data are clearly defined in the microwave observations, and borders of convective rain areas are well defined using the high-frequency (90 GHz and greater) microwave observations.

Adler, Robert F.↗
DOE OSTI2022

Associative memories using complex-valued Hopfield networks based on spin-torque oscillator arrays

Abstract Simulations of complex-valued Hopfield networks based on spin-torque oscillators can recover phase-encoded images. Sequences of memristor-augmented inverters provide tunable delay elements that implement complex weights by phase shifting the oscillatory output of the oscillators. Pseudo-inverse training suffices to store at least 12 images in a set of 192 oscillators, representing 16 × 12 pixel images. The energy required to recover an image depends on the desired error level. For the oscillators and circuitry considered here, 5% root mean square deviations from the ideal image require approximately 5 μ s and consume roughly 130 nJ. Simulations show that the network functions well when the resonant frequency of the oscillators can be tuned to have a fractional spread less than 10 −3 , depending on the strength of the feedback.

Prasad, Nitin (ORCID:0000000180880164)↗
NASA NTRS1978

Automatic communication signal monitoring system

A system is presented for automatic monitoring of a communication signal in the RF or IF spectrum utilizing a superheterodyne receiver technique with a VCO to select and sweep the frequency band of interest. A first memory is used to store one band sweep as a reference for continual comparison with subsequent band sweeps. Any deviation of a subsequent band sweep by more than a predetermined tolerance level produces an alarm signal which causes the band sweep data temporarily stored in one of two buffer memories to be transferred to long-term store while the other buffer memory is switched to its store mode to assume the task of temporarily storing subsequent band sweeps.

Bernstein, A. J.↗
NASA NTRS1992

Variations of the Milankovitch frequencies in time

The sensitivity of the amplitudes and frequencies in the development of the Earth's orbital and rotational elements involved in the astronomical theory of paleoclimates (eccentricity, obliquity, and climate precession), to the Earth-Moon distance and consequently to the length of the day and to the dynamical ellipticity of the Earth has been discussed for the last billions of years. The shortening of the Earth-Moon distance and of the length of the day, as well as the lengthening of the dynamical ellipticity of the Earth back in time induce a shortening of the fundamental astronomical periods for precession and obliquity. At the same time, the amplitudes of the different terms in the development of the obliquity are undergoing a relative enlargement of about 50 percent at 2 x 10(exp 9) yr BP but the independent term is increasing very weakly (less than 0.1 percent). In other words, the value of the obliquity, which lies within a range of 21.7 to 24.9 deg over the Quarternary was restricted to a range of 22.5 to 24.1 deg at 2 x 10(exp 9) yr BP. On the other hand, the amplitudes in the development of the climatic precession do not change. Moreover, these changes in the frequencies and amplitudes for both obliquity and climatic precession are larger for longer period terms. Finally, the periods in the eccentricity development are not influenced by the variation of the lunar distance. But the motion of the solar system, especially of the inner planets, was shown to be chaotic. It means that it is impossible to compute the exact motion of the planets over more than about 100 Myr, and the fundamental frequencies of the systems are not fixed quantities, but are slowly varying with time. As long as we consider the most important terms, the maximum deviation from the present-day value of the 19-kyr precessional period due to the chaotic motion of the solar system only does not reach more than a few tens of years around 80 Myr BP. Therefore the shortening of the obliquity and climatic precession periods is mostly driven by the change in the lunar distance and the consequent variations in the dynamical ellipticity of the Earth's angular speed. At first sight, the deviation in the period for the eccentricity can be neglected, as the chaotic behavior of the solar system implies a relative change of the main periods by less than 0.2 percent, 1.4 percent, and 1.9 percent respectively, this maximum change being achieved around 80 Myr BP. This implies, in particular, that the eccentricity periods for Quarternary climate studies may be considered more or less constant for pre-Quaternay times and equal to their Quaternary values.

Loutre, Marie-France↗
NASA NTRS1996

Summary Report of Mission Acceleration Measurements for STS-73, Launched October 20, 1995

The microgravity environment of the Space Shuttle Columbia was measured during the STS-73 mission using accelerometers from five different instruments: the Orbital Acceleration Research Experiment, the Space Acceleration Measurement System, the Three-dimensional Microgravity Accelerometer, the Microgravity Measuring Device, and Suppression of Transient Accelerations by Levitation Evaluation System. The Microgravity Analysis Workstation quasi-steady environment calculation and comparison of this calculation with Orbital Acceleration Research Experiment data was used to assess how appropriate a planned attitude was expected to be for one Crystal Growth Facility experiment sample. The microgravity environment related to several different Orbiter, crew, and experiment operations is presented and interpreted in this report. Data are examined to show the effects of vernier reaction control system jet firings for Orbiter attitude control. This is compared to examples of data when no thrusters were firing, when the primary reaction control system jets were used for attitude control, and when single vernier jets were fired for test purposes. In general, vernier jets, when used for attitude control, cause accelerations in the 3 x 10(exp -4) g to 7 x 10(exp -4) g range. Primary jets used in this manner cause accelerations in the 0.01 to 0.025 g range. Other significant disturbance sources characterized are water dump operations, with Y(sub b) axis acceleration deviations of about 1 x 10(exp -6) g; payload bay door opening motion, with Y(sub o) and Z(sub o) axis accelerations of frequency 0.4 Hz; and probable Glovebox fan operations with notable frequency components at 20, 38, 43, 48, and 53 Hz. The STS-73 microgravity environment is comparable to the environments measured on earlier microgravity science missions.

Rogers, Melissa J. B.↗
NASA NTRS1961

Project Echo: 960-Megacycle, 10-Kilowatt Transmitter

A 10-kw transmitter operating at 960 to 961 Mc was used at the eastern terminus of the Project Echo communications experiment. This transmitter is located on Crawford's Hill near Holmdel, New Jersey. The 10-kw output feeds into a waveguide line leading to a 60-foot dish antenna. Exciter-driver units are available to drive the power amplifier with various modulations, such as wide-deviation FM, low-index phase modulation, single-sideband or double-sideband modulation with or without carrier, 960.05 or 961.05 Mc constant-frequency CW, and radar on-off pulses at 961.05 Mc. The main output amplifier consists primarily of a four-stage, externally-tuned-cavity, water-cooled klystron, operating at a beam voltage of 16 to 18 kv. The transmitter has been operated during many Moonbounce, tropospheric scatter, and Echo I tests with very satisfactory results. This paper describes its use before March 1, 1961.

Schafer, J. P.↗