Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fractional diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22

Positrons from supernovae

Positrons are produced in the ejecta of supernovae by the decay of nucleosynthetic Co-56, Ti-44, and Al-26. We calculate the probability that these positrons can survive without annihilating in the supernova ejecta, and we show that enough of these positrons should escape into the interstellar medium to account for the observed diffuse Galactic annihilation radiation. The surviving positrons are carried by the expanding ejecta into the interstellar medium where their annihilation lifetime of 10 exp 5 - 10 exp 6 yr is much longer than the average supernovae occurrence time of about 100 yr. Thus, annihilating positrons from thousands of supernovae throughout the Galaxy produce a steady diffuse flux of annihilation radiation. We further show that combining the calculated positron survival fractions and nucleosynthetic yields for current supernova models with the estimated supernova rates and the observed flux of diffuse Galactic annihilation radiation suggests that the present Galactic rate of Fe-56 nucleosynthesis is about 0.8 +/- 0.6 solar mass per 100 yr.

Chan, Kai-Wing↗

High-coercivity ThMn 12 -type monocrystalline Sm–Zr–Fe–Co–Ti particles by high-temperature reduction diffusion

The ThMn 12 -type (Sm,Zr)1(Fe,Co,Ti) 12 compounds have the potential of powerful permanent magnets. Magnetically hard and anisotropic powders of such compound have been prepared by subjecting elemental oxides and Co mixed with Ca and CaO dispersant to a succession of high-energy ball-milling, reduction diffusion at 990–1220 °C and repeated washing. The size of the resulting ThMn 12 -type crystallites, their coercivity and fraction of monocrystalline particles were all found to increase with the reduction-diffusion temperature. Particles synthesized at 1220 °C were highly monocrystalline with a mean size of 0.54 μm and, after a magnetic-field alignment, exhibited a coercivity of 1.26 T and a full-density-projected maximum energy product of at least 209 kJ/m 3 (26.3 MGOe). Here, the strong positive effect of the reduction-diffusion temperature on the coercivity has been attributed to separation of the crystallites and to decrease in the incidence of structural defects.

36 MATERIALS SCIENCE↗

Technical Note: Isotopic corrections for the radiocarbon composition of CO 2 in the soil gas environment must account for diffusion and diffusive mixing

Earth system scientists working with radiocarbon in organic samples use a stable carbon isotope ( δ 13 C ) correction to account for mass-dependent fractionation, but it has not been evaluated for the soil gas environment, wherein both diffusive gas transport and diffusive mixing are important. Using theory and an analytical soil gas transport model, we demonstrate that the conventional correction is inappropriate for interpreting the radioisotopic composition of CO 2 from biological production because it does not account for important gas transport mechanisms. Based on theory used to interpret δ 13 C of soil production from soil CO 2 , we propose a new solution for radiocarbon applications in the soil gas environment that fully accounts for both mass-dependent diffusion and mass-independent diffusive mixing.

54 ENVIRONMENTAL SCIENCES↗

An optimization-based approach to parameter learning for fractional type nonlocal models

Nonlocal operators of fractional type are a popular modeling choice for applications that do not adhere to classical diffusive behavior; however, one major challenge in nonlocal simulations is the selection of model parameters. In this study we propose an optimization-based approach to parameter identification for fractional models with an optional truncation radius. We formulate the inference problem as an optimal control problem where the objective is to minimize the discrepancy between observed data and an approximate solution of the model, and the control variables are the fractional order and the truncation length. For the numerical solution of the minimization problem we propose a gradient-based approach, where we enhance the numerical performance by an approximation of the bilinear form of the state equation and its derivative with respect to the fractional order. Several numerical tests in one and two dimensions illustrate the theoretical results and show the robustness and applicability of our method.

97 MATHEMATICS AND COMPUTING↗

An optimization-based approach to parameter learning for fractional type nonlocal models

Nonlocal operators of fractional type are a popular modeling choice for applications that do not adhere to classical diffusive behavior; however, one major challenge in nonlocal simulations is the selection of model parameters. In this work we propose an optimization-based approach to parameter identification for fractional models with an optional truncation radius. We formulate the inference problem as an optimal control problem where the objective is to minimize the discrepancy between observed data and an approximate solution of the model, and the control variables are the fractional order and the truncation length. For the numerical solution of the minimization problem we propose a gradient-based approach, where we enhance the numerical performance by an approximation of the bilinear form of the state equation and its derivative with respect to the fractional order. Several numerical tests in one and two dimensions illustrate the theoretical results and show the robustness and applicability of our method.

97 MATHEMATICS AND COMPUTING↗

Scale-Dependent Fracture-Matrix Interactions And Their Impact on Radionuclide Transport - Final Report

Matrix diffusion and adsorption within a rock matrix are widely regarded as important mechanisms for retarding the transport of radionuclides and other solutes in fractured rock (e.g., Neretnieks, 1980; Tang et al., 1981; Maloszewski and Zuber, 1985; Novakowski and Lapcevic, 1994; Jardine et al., 1999; Zhou and Xie, 2003; Reimus et al., 2003a,b). When remediation options are being evaluated for old sources of contamination, where a large fraction of contaminants reside within the rock matrix, slow diffusion out of the matrix greatly increases the difficulty and timeframe of remediation. Estimating the rates of solute exchange between fractures and the adjacent rock matrix is a critical factor in quantifying immobilization and/or remobilization of DOE-relevant contaminants within the subsurface. In principle, the most rigorous approach to modeling solute transport with fracture-matrix interaction would be based on local-scale coupled advection-diffusion/dispersion equations for the rock matrix and in discrete fractures that comprise the fracture network (Discrete Fracture Network and Matrix approach, hereinafter referred to as DFNM approach), fully resolving aperture variability in fractures and matrix property heterogeneity. However, such approaches are computationally demanding, and thus, many predictive models rely upon simplified models. These models typically idealize fracture rock masses as a single fracture or system of parallel fractures interacting with slabs of porous matrix or as a mobile-immobile or multi-rate mass transfer system. These idealizations provide tractable approaches for interpreting tracer tests and predicting contaminant mobility, but rely upon a fitted effective matrix diffusivity or mass-transfer coefficients. However, because these fitted parameters are based upon simplified conceptual models, their effectiveness at predicting long-term transport processes remains uncertain. Evidence of scale dependence of effective matrix diffusion coefficients obtained from tracer tests highlights this point and suggests that the underlying mechanisms and relationship between rock and fracture properties are not fully understood in large complex fracture networks. In this project, we developed a high-resolution DFN model of solute transport in fracture networks to explore and quantify the mechanisms that control transport in complex fracture networks and how these may give rise to observed scale-dependent matrix diffusion coefficients. Results demonstrate that small scale heterogeneity in the flow field caused by local aperture variability within individual fractures can lead to long-tailed breakthrough curves indicative of matrix diffusion, even in the absence of interactions with the fracture matrix. Furthermore, the temporal and spatial scale dependence of these processes highlights the inability of short-term tracer tests to estimate transport parameters that will control long-term fate and transport of contaminants in fractured aquifers.

58 GEOSCIENCES↗

NMR relaxometry characterization of water adsorption in corn stover anatomical fractions

Nuclear magnetic resonance (NMR) relaxometry is applied to provide direct measurement of water adsorption in anatomical fractions of corn stover. NMR transverse T 2 relaxation time distribution measurements indicate multiple water populations, which vary with anatomical fraction and water adsorption. Measured T 2 data are used to calculate thermodynamic properties of Brunauer-Emmet-Teller adsorption theory using a model to estimate mono and bilayer relaxation. T 2 data are used directly to determine rotational diffusion correlation times indicating adsorption interaction strength. T 1 -T 2 longitudinal-transverse relaxation time correlation measurements quantify differences in the molecular level structural order of the adsorbate surface water as a function of water activity, i.e. relative humidity or water vapor partial pressure. The T 1 /T 2 ratio provides a measure of the surface energy related to the adsorption strength and surface diffusive mobility of the water adsorbate and differentiates the anatomical fractions. Furthermore, the results indicate that direct measurement of NMR relaxation times can be used to characterize corn stover biomass water adsorption, data relevant to processing and handling considerations.

09 BIOMASS FUELS↗

Towards inverse microstructure-centered materials design using generative phase-field modeling and deep variational autoencoders

The field of Integrated Computational Materials Engineering (ICME) combines a broad range of methods to study materials’ responses over a spectrum of length scales. A relatively unexplored aspect of microstructure-sensitive materials design is uncertainty propagation and quantification (UP/UQ) of materials’ microstructure, as well as establishing process-structure–property (PSP) relationships for inverse material design. In this study, an efficient UP technique built on the idea of changing probability measures and a deep generative unsupervised representative machine learning method for microstructure-based design of thermal conductivity of materials is proposed. Probability measures are used to represent microstructure space, and Wasserstein metrics are used to test the efficiency of the UP method. By using deep Variational AutoEncoder (VAE), we identify the correlations between the material/process parameters and the thermal conductivity of heterogeneous dual-phase microstructures. Through high-throughput screening, UP, and the deep-generative VAE method, PSP relationships that are too complex can be revealed by exploiting the materials’ design space with an emphasis on microstructures. As a last point, we demonstrate generative machine learning serves as a useful tool for inverse microstructure-centered materials design, and we demonstrate this by examining the inverse design of thermal conductivity in nano-structured materials. Here, the results reveal the effects of morphology, volume fraction, characteristic length scale, and the individual thermal diffusivity of phases on the thermal conductivity of dual-phase alloys. Our findings emphasize the advantages of high-throughput phase-field modeling and generative deep learning for linking PSP and inverse microstructure-centered materials design.

36 MATERIALS SCIENCE↗

Electrochemical properties of the interaction between cytochrome c and a hematite nanowire array electrode

We investigate the interaction of horse heart cytochrome c (cyt c ) with hematite nanowire array electrodes by cyclic voltammetry to study the electron transfer between redox active proteins and mineral surfaces. Using this model system, we quantify electron transfer rates between cyt c and hematite under varying electric potential and pH conditions. The results are consistent with two cyt c conformations adsorbed at the hematite surface: the native and a partially unfolded form. The partially unfolded protein maintained redox activity, but at a lower redox potential than the native protein. Adsorption of cyt c allowed direct electron transfer between cyt c and hematite, with an interfacial electron transfer rate, k ° ET , of 0.4 s -1 for the native form and 0.55 s -1 for the partially unfolded protein at pH 7.07. At pH 4.66, protein adsorption decreased compared to neutral pH and the fraction of partially unfolded protein increased. Additionally, the diffusion controlled electron transfer rate between hematite and the electron shuttling compound anthraquinone-2,6-disulfonate (AQDS) was determined to be k ° ET = 8.0·10 -3 cm·s -1 at pH 7.07. In conclusion, modulation of electron transfer rates as a result of conformational changes by redox active proteins has broad implications for describing chemical transformations at biological-mineral interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation and modeling of interspecies ion separation in inertial confinement fusion implosions via imaging x-ray spectroscopy

In this article, we report the first direct experimental evidence of interspecies ion separation in direct-drive inertial confinement fusion experiments performed at the OMEGA laser facility via spectrally, temporally, and spatially resolved imaging x-ray-spectroscopy data [S. C. Hsu et al., Europhys. Lett. 115, 65001 (2016)]. These experiments were designed based on the expectation that interspecies ion thermo-diffusion would be the strongest for species with a large mass and charge difference. The targets were spherical plastic shells filled with D2 and a trace amount of Ar (0.1% or 1% by atom). Ar K-shell spectral features were observed primarily between the time of first-shock convergence and slightly before the neutron bang time, using a time- and space-integrated spectrometer, a streaked crystal spectrometer, and two gated multi-monochromatic x-ray imagers fielded along quasi-orthogonal lines of sight. Detailed spectroscopic analyses of spatially resolved Ar K-shell lines reveal the deviation from the initial 1% Ar gas fill and show both Ar-concentration enhancement and depletion at different times and radial positions of the implosion. The experimental results are interpreted using radiation-hydrodynamic simulations that include recently implemented, first-principles models of interspecies ion diffusion. Lastly, the experimentally inferred Ar-atom fraction profiles agree reasonably with calculated profiles associated with the incoming and rebounding first shock.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Continuum model for hydrogen pickup in zirconium alloys of LWR fuel cladding

A continuum model for calculating the time-dependent hydrogen pickup fractions in various Zirconium alloys under steam and pressured water oxidation has been developed in this paper. Using only one fitting parameter, the effective hydrogen gas partial pressure at the oxide surface, a qualitative agreement is obtained between the predicted and previously measured hydrogen pickup fractions. The calculation results therefore demonstrate that H diffusion through the dense oxide layer plays an important role in the hydrogen pickup process. Finally, the limitations and possible improvement of the model are also discussed.

36 MATERIALS SCIENCE↗

Identifying ultrahigh-energy cosmic-ray accelerators with future ultrahigh-energy neutrino detectors

The detection of ultrahigh-energy (UHE) neutrino sources would contribute significantly to solving the decades-old mystery of the origin of the highest-energy cosmic rays. We investigate the ability of a future UHE neutrino detector to identify the brightest neutrino point sources, by exploring the parameter space of the total number of observed events and the angular resolution of the detector. The favored parameter region can be translated to requirements for the effective area, sky coverage and angular resolution of future detectors, for a given source number density and evolution history. Moreover, by studying the typical distance to sources that are expected to emit more than one event for a given diffuse neutrino flux, we find that a significant fraction of the identifiable UHE neutrino sources may be located in the nearby Universe if the source number density is above ∼10{sup −6} Mpc{sup −3}. If sources are powerful and rare enough, as predicted in blazar scenarios, they can first be detected at distant locations. Our result also suggests that if UHE cosmic-ray accelerators are neither beamed nor transients, it will be possible to associate the detected UHE neutrino sources with nearby UHE cosmic-ray and gamma-ray sources, and that they may also be observed using other messengers, including ones with limited horizons such as TeV gamma rays, UHE gamma rays and cosmic rays. We find that for a ∼>5σ detection of UHE neutrino sources with a uniform density, n {sub s} {sub ∼}10{sup −7}−10{sup −5} Mpc{sup −3}, at least ∼100−1000 events and sub-degree angular resolution are needed, and the results depend on the source evolution model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Unveiling the star formation history of the Upper Scorpius association through its kinematics

ABSTRACT Stellar associations can be discerned as overdensities of sources not only in the physical space but also in the velocity space. The common motion of their members, gradually eroded by the galactic tidal field, is partially reminiscent of the initial kinematic structure. Using recent data from Gaia EDR3, combined with radial velocities from GALAH and APOGEE, we traced back the present positions of stars belonging to Upper Scorpius (USCO), a subgroup of Scorpius–Centaurus, the nearest OB association. About one half of the subgroup (the ‘clustered’ population) appears composed of many smaller entities, which were in a more compact configuration in the past. The presence of a kinematic duality is reflected into an age spread between this younger clustered population and an older diffuse population, in turn confirmed by a different fraction fD of disc-bearing stars (fD = 0.24 ± 0.02 versus fD = 0.10 ± 0.01). Star formation in USCO appears to have lasted more than 10 Myr and proceeded in small groups that, after a few Myr, dissolve in the field of the older population but retain for some time memory of their initial structure. The difference of ages inferred through isochrones and kinematics, in this regard, could provide a powerful tool to quantify the time-scale of gas removal.

79 ASTRONOMY AND ASTROPHYSICS↗

Fixed-phase diffusion Monte Carlo study of activation gap and skyrmion excitations of a ν = 1 system in the presence of charged impurities

The discrepancy between the theoretically calculated and experimentally measured activation gaps in quantum Hall effect has long been a puzzle. We revisit this issue in the context of the v = 1 quantum Hall state, while also incorporating the skyrmion physics. We find that the finite width and the Landau level mixing effects are not sufficient to explain the observed activation gap. We further show that the presence of charged impurities located adjacent to the quantum well can cause a significant reduction in the activation gap, while also causing a suppression of the skyrmion size.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Limiting Retained Austenite Decomposition in Quenched and Tempered Steels: Influences of Rapid Tempering and Silicon

Tempering reactions are critical to microstructure and property control in martensitic steels. Here, retained austenite decomposition and cementite precipitation are monitored using Mössbauer spectroscopy in 4340 and 300-M steel under conventional and rapid tempering conditions. Tempering times are compared at a constant tempered hardness by increasing tempering temperatures associated with short time conditions to achieve equivalent matrix softening to that of longer tempering times. Time-temperature combinations that provide equivalent tempered hardness generated microstructures with similar dislocation densities and cementite precipitation fractions; these mechanisms are controlled by self-diffusion. However, systematic differences in retained austenite content were observed at a given degree of softening, where shorter tempering times exhibited higher levels of retained austenite compared to more conventional conditions. At low temperatures, the differences in retained austenite preservation between explored time-temperature conditions are attributed to corresponding differences in carbon diffusion distance (in austenite), the controlling diffusional process of retained austenite decomposition. At higher temperatures, retained austenite decomposition exhibits C-curve kinetic behavior in 4340. Thus, reduced thermodynamic driving force for cementite and ferrite formation at higher temperature is believed to play a role in restricting retained austenite decomposition within some short-time, high temperature tempering regimes. The addition of silicon pushes cementite precipitation and retained austenite decomposition to higher temperatures, although retained austenite decomposition is suppressed to a greater extent than cementite precipitation. Potential is illustrated for coupling rapid tempering with silicon alloying to produce appreciably tempered martensite (~490 HV) with relatively less retained austenite decomposition compared to conventional tempering conditions.

36 MATERIALS SCIENCE↗

Diffusion and Solvation Dynamics of Ions in Water: Beyond the Brownian Approximation

The coupled dynamics of ions and water molecules in their first hydration shell impact a variety of processes including ion diffusion, selective ion transport in water-filled nanopores, and the kinetics of ion-pairing, ion adsorption, and metal-ligand binding reactions. In this work, we study these coupled dynamics for alkali metals (Li, Na, K, Rb, Cs), alkaline Earth metals (Mg, Ca, Sr, Ba), and chloride through the lens of their dependence on ion isotopic mass. Results are validated against previous measurements of the isotopic mass-dependence of ion diffusion coefficients in water and previous ab initio calculations of ion high-frequency dynamics in water. We find that the vibrational power spectra of ions in water consistently exhibit either two or three peaks, i.e., ions have several rattling frequencies within their solvations shells as previously reported for a subset of the species examined here. These frequencies have different sensititivies to isotopic mass that may serve as signatures of ion solvation processes (such as the tendency of ions to orient their first-shell water molecules) and that also may relate to Hofmeister-like effects including the relative affinity of different metals for ribonucleic acid (RNA).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Application of the SEM to the measurement of solar cell parameters

A pair of techniques are described which make use of the SEM to measure, respectively, the minority carrier diffusion length and the metallurgical junction depth in silicon solar cells. The former technique permits the measurement of the true bulk diffusion length through the application of highly doped field layers to the back surfaces of the cells being investigated. The technique yields an absolute value of the diffusion length from a knowledge of the collected fraction of the injected carriers and the cell thickness. It is shown that the secondary emission contrast observed in the SEM on a reverse-biased diode can depict the location of the metallurgical junction if the diode has been prepared with the proper beveled geometry. The SEM provides the required contrast and the option of high magnification, permitting the measurement of extremely shallow junction depths.

Weizer, V. G.↗