Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “experimental data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 397 records · Page 22
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Calculation of ion–ion mutual neutralization rate constants using Landau–Zener theory coupled with trajectory simulations for Ar + –Cl − , Br − , I −

In this computational study, we self-consistently calculate the rate constants of mutual neutralization reactions by incorporating the electron transfer probability, using Landau–Zener state transition theory with inputs derived from ab initio quantum chemistry calculations, into classical trajectory simulations. Electronic structure calculations are done using correlation consistent basis sets with multi-reference configuration interaction to map all the molecular electronic states below the ion-dissociation limit as a function of the distance between the reacting species. Our electronic structure calculations have been significantly improved from our previous work through improved selection of molecular electronic configurations maintaining a fine grid of 1a 0 over a wide range of bond lengths and accurate treatment of spin–orbit couplings. Non-adiabatic coupling matrix elements are calculated with the three-point central difference method near each avoided crossing to estimate the exact crossing point R x and coupling parameter H if , which are inputs to the multi-channel Landau–Zener theory to calculate the electron transition probability. Our approach is applied to estimate the mutual neutralization rate constants for the following ion pairs: Ar + –Cl − , Ar + –Br − , Ar + –I − at ∼133 Pa. Furthermore, our predictions are compared against the experimental data reported. It is seen that the improvement in the electronic structure calculation results in excellent agreement between the simulation results and the available experimental data to within a factor of ∼2 or ∼±50%.

Complete-active space self-consistent field↗
DOE OSTI2024

Localized basis set for plutonium

The implementation of optimal strictly localized atomic orbitals basis for plutonium (Pu) using norm-conserving pseudopotential density-functional theory (DFT) is presented. The basis set was applied to the α, β, γ, δ, δ', and ε phases of Pu, δ-Pu surface, and δ-PuGa alloys. The computed properties of the Pu phases and δ-Pu surface were in good agreement with both available experimental data and prior DFT calculations based on plane-wave methodologies. Results for the δ-PuGa alloys were also in good agreement with experimental data. Finally, the reliability of the basis set was further demonstrated by using ab initio molecular dynamics to model the diffusion coefficient and activation barrier for atomic diffusion in a δ-PuGa alloy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Connecting Nuclear Structure to Stellar Astrophysics: Neutron Skin in Tin Isotopes

The first observation of a neutron star merger by the LIGO-Virgo collaboration in 2017 highlights the need to improve our fundamental understanding of the equation of state of dense, neutron rich matter. The origin of heavy elements in the r-process and the structure of neutron stars are governed by the properties of neutron rich matter, for which experimental data is limited. Further analysis of this historic event and all future neutron star mergers relies on constraining the nuclear equation of state with experimental observables. We propose a novel method for systematically studying the evolution of the neutron skin in stable tin isotopes, by measuring the low-energy nuclear dipole strength over the broadest possible range of neutron-to-proton ratios in a single element. Nuclear resonance fluorescence with 100% linearly polarized photons from the High Intensity Gamma-ray Source (HIGS) facility was used to selectively measure the E1 photoabsorption strength of 112 Sn and 124 Sn at excitation energies from 3.5 MeV up to neutron separation, where the Pygmy Dipole Resonance dominates. The dipole polarizabilities of 112 Sn and 124 Sn were measured to be 9.03 ± 0.23 fm 3 and 9.11 ± 0.24 fm 3 , respectively. These uniquely systematically consistent measurements provide highly accurate experimental data for improving microscopic nuclear models as well as calculations of astrophysical nucleosynthesis and neutron star structure.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Photon induced $K\Lambda $ production on the proton at $E_{\gamma} < 3$ GeV

The associated photoproduction of $K\Lambda$ from the proton for $E_{\gamma} < 3$ GeV is studied using an isobar model in which the non-resonant contributions corresponding to $s$, $t$, $u$ channel diagrams are obtained from a non-linear sigma model with chiral SU(3) symmetry. The model also predicts a contact term and its coupling strength in a natural way to preserve gauge symmetry. The parameters used are the pion decay constant $f_{\pi}$, vector and axial vector current couplings of the baryon octet in terms of the symmetric and antisymmetric couplings $D$ and $F$. In the non-resonant sector, the model is almost parameter free except a common cut-off parameter $\Lambda_{B}$, to describe the hadronic form factors at the strong kaon-nucleon-hyperon($KN\Lambda$) vertices. In the resonance sector, contribution from the various nucleon resonances($R$) in the $s$ channel, hyperon resonances($Y^{*}$) in the $u$ channel, and the kaon resonances($K^{*}$ and $K_{1}$) in the $t$ channel, which are present in the PDG having spin $\le \frac{3}{2}$ and mass $<2$ GeV with significant branching ratio in $K\Lambda$ decay mode have been considered. In the case of the nucleon resonances($R$), the couplings $\gamma NR$ at the electromagnetic vertices are determined in terms of the helicity amplitudes and the $RK\Lambda$ couplings at the strong vertices are determined by the partial decay width of the resonances($R$) decaying to $K\Lambda$. The strong and the electromagnetic couplings of $u$ and $t$ channel resonances are fitted to reproduce the experimental data of CLAS and SAPHIR. The numerical results are presented for the total and differential scattering cross sections and are compared with the available experimental data from CLAS and SAPHIR as well as with some of the recent theoretical models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

A Universal Refrigerant Charge Fault Detection and Diagnostics Method Based on Pump Down Operation

The performance of the heat pump system varies greatly depending on the refrigerant charge amount. Improving the refrigerant charge fault detection and diagnostics (FDD) method of vapor compression systems have the potential for increasing energy efficiency and reducing service cost. Previous studies to predict refrigerant charge amount are mostly empirical methods which require significant amount of experimental data for high accuracy. The primary goal of this research is to develop a universal charge fault detection method which requires only a few experimental data with high prediction accuracy.Currently, pump down operations are typical practices by HVAC technicians when they need to open the refrigerant circuit to make a repairment. In addition, compressors have a built-in low-pressure cut-off protection function, and the compressor performance maps are commonly available from manufacturers. The proposed method innovatively utilizes the typical pump down operation, the compressor low-pressure cut-off protection, and the compressor performance map. It does not require any geometry information of heat exchangers, refrigerant lines, or charge buffers.The new charge prediction method is firstly formulated through theoretical analysis, then verified and calibrated by a quasi-steady-state simulation of the pump down process for a residential heat pump system. The quasi steady-state simulation uses an HVAC system simulation framework driven by DOE/ORNL Heat Pump Design Model (HPDM). Preliminary experiment validations with heat pump refrigerant leakage tests demonstrate the deviation of the proposed charge prediction method compared with measurement is within 8%. This technology makes refrigerant charge amount available at the technician’s fingertips and leads to shorter maintenance time and fewer site visits.

Li, Zhenning↗
DOE OSTI2022

Recent progress toward catalyst properties, performance, and prediction with data-driven methods

Herein, data-driven approaches are currently renovating the field of heterogenous catalysis and open a door to advance catalyst design. Their success depends heavily on the synergy among machine learning (ML), experimental data, and quantum mechanical (QM) calculations. In this brief survey of recent progress, we examine catalysis informatics in the context of (1) ML-aided catalyst characterizations, (2) knowledge extractions from experimental data, (3) predictions of catalytic properties and constructions of reaction networks, and (4) ML-enabled large-scale QM simulations. An outlook on the current challenges of this rapidly evolving field is also provided.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

304L Can Crush Validation Studies

Accurate prediction of ductile behavior of structural alloys up to and including failure is essential in component or system failure assessment, which is necessary for nuclear weapons alteration and life extensions programs of Sandia National Laboratories. Modeling such behavior requires computational capabilities to robustly capture strong nonlinearities (geometric and material), rate- dependent and temperature-dependent properties, and ductile failure mechanisms. This study's objective is to validate numerical simulations of a high-deformation crush of a stainless steel can. The process consists of identifying a suitable can geometry and loading conditions, conducting the laboratory testing, developing a high-quality Sierra/SM simulation, and then drawing comparisons between model and measurement to assess the fitness of the simulation in regards to material model (plasticity), finite element model construction, and failure model. Following previous material model calibration, a J 2 plasticity model with a microstructural BCJ failure model is employed to model the test specimen made of 304L stainless steel. Simulated results are verified and validated through mesh and mass-scaling convergence studies, parameter sensitivity studies, and a comparison to experimental data. The converged mesh and degree of mass-scaling are the mesh discretization with 140,372 elements, and a mass scaling with a target time increment of 1.0e-6 seconds and time step scale factor of 0.5, respectively. Results from the coupled thermal-mechanical explicit dynamic analysis are comparable to the experimental data. Simulated global force vs displacement (F/D) response predicts key points such as yield, ultimate, and kinks of the experimental F/D response. Furthermore, the final deformed shape of the can and field data predicted from the analysis are similar to that of the deformed can, as measured by 3D optical CMM scans and DIC data from the experiment.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A physically based mechanical model for Mullins effect in thermoplastic polyurethanes

Despite decades of research, connecting the chemical and physical structure of thermoplastic polyurethanes to their mechanical properties remains highly challenging. Of particular note are their large-deformation and rate-dependent behaviors, which vary greatly with molecular chemistry, including the type and relative content of soft and hard segments. In this work, we develop a physically motivated mechanical theory for predicting the behavior of thermoplastic polyurethanes. The theory incorporates a representation of microstructural evolution during mechanical deformation, which captures the signatures of stress softening over cyclic loading (commonly referred to as the Mullins effect). There are only eight physically motivated fitting parameters, including a direct dependence on the hard segment fraction. The model predicts that increasing the hard segment fraction leads to higher stiffness and greater energy dissipation, in quantitative agreement with published experimental data. Furthermore, we provide a comprehensive analysis of the model and validate its predictions across several independent datasets focused on mechanical characterization. Direct comparisons to experimental data demonstrate its predictive capability on the effect of loading rate, cyclic deformations, and applied tension or compression. Altogether, this work establishes a predictive framework that connects polymer chemistry and microstructure to emergent mechanical behaviors.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A buffering heat exchanger/thermal energy storage system for desalination applications

A buffering heat exchanger/thermal energy storage (BHXTES) system was designed using a fast-response phase-change material/graphite foam (PCM/GF) medium for desalination and potentially other industrial applications. Unlike a store-now-and-use-later TES system, this study focused on developing a dynamically balanced, continuously used, system that optimized three functions. A lab-scale prototype was designed and fabricated with a PureTemp 151/GF storage medium. The experimental data showed excellent thermal performance repeatability indicating minimal effects of PCM expansion and contraction on the GF as well as negligible PCM redistribution effects. The experimental data also served as a validation of the numerical model of the BHXTES system, after which optimization of the BHXTES system was conducted through numerical simulations for both PureTemp 151/GF and solar salt/GF as the storage medium. The results show that, with a Therminol 55 heat transfer fluid, continuous operation of the system can be realized with a solar energy source through cycles of 8-h changing for desalination and energy storage with the supplied heat followed by 16-h discharging for desalination with the stored energy. As a result, the working fluid outlet temperatures are generally in the ranges of approximately 128–160 °C for a PureTemp 151/GF medium and 198–220 °C for a solar salt/GF medium.

Buffering↗
DOE OSTI2021

The NUBASE2020 evaluation of nuclear physics properties *

The NUBASE2020 evaluation contains the recommended values of the main nuclear physics properties for all nuclei in their ground and excited, isomeric (T-1/2 >= 100 ns) states. It encompasses all experimental data published in primary (journal articles) and secondary (mainly laboratory reports and conference proceedings) references, together with the corresponding bibliographical information. In cases where no experimental data were available for a particular nuclide, trends in the behavior of specific properties in neighboring nuclei were examined and estimated values are proposed. Evaluation procedures and policies that were used during the development of this evaluated nuclear data library are presented, together with a detailed table of recommended values and their uncertainties.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

$J/\psi $-p scattering length from the total and differential photoproduction cross sections

The J/ψ-p scattering length, αJ/ψp, can be extracted from the J/ψ photoproduction cross section near threshold using the Vector Meson Dominance (VMD) model to relate the reaction γp→J/ψp to J/ψp→J/ψp. Such estimates based on experimental data result in values for |αJ/ψp|, which are much lower than most of the theoretical predictions. In this work, we study the relations between the different results, depending on the use of the total or the differential cross sections, and the method of extrapolating the data to threshold in the case of a low-statistics data sample, such as the near threshold J/ψ photoproduction dataset. We estimate a range for |αJ/ψp| of 0.003–0.025 fm as extracted from experimental data within the VMD model and discuss possible reasons for such lower values compared to the theoretical results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Transfer learning driven design optimization for inertial confinement fusion

Transfer learning is a promising approach to create predictive models that incorporate simulation and experimental data into a common framework. In this technique, a neural network is first trained on a large database of simulations and then partially retrained on sparse sets of experimental data to adjust predictions to be more consistent with reality. Previously, this technique has been used to create predictive models of Omega [Humbird et al., IEEE Trans. Plasma Sci. 48, 61–70 (2019)] and NIF [Humbird et al., Phys. Plasmas 28, 042709 (2021); Kustowski et al., Mach. Learn. 3, 015035 (2022)] inertial confinement fusion (ICF) experiments that are more accurate than simulations alone. Here, in this work, we conduct a transfer learning driven hypothetical ICF campaign in which the goal is to maximize experimental neutron yield via Bayesian optimization. The transfer learning model achieves yields within 5% of the maximum achievable yield in a modest-sized design space in fewer than 20 experiments. Furthermore, we demonstrate that this method is more efficient at optimizing designs than traditional model calibration techniques commonly employed in ICF design. Such an approach to ICF design could enable robust optimization of experimental performance under uncertainty.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Comparison of fixed charge and polarizable models for predicting the structural, thermodynamic, and transport properties of molten alkali chlorides

Results from extensive molecular dynamics simulations of molten LiCl, NaCl, KCl, and RbCl over a wide range of temperatures are reported. Comparison is made between the “Polarizable Ion Model” (PIM) and the non-polarizable “Rigid Ion Model” (RIM). Densities, self-diffusivities, shear viscosities, ionic conductivities, and thermal conductivities are computed and compared with experimental data. In addition, radial distribution functions are computed from ab initio molecular dynamics simulations and compared with the two sets of classical simulations as well as experimental data. Here, the two classical models perform reasonably well at capturing structural and dynamic properties of the four molten alkali chlorides, both qualitatively and often quantitatively. With the singular exception of liquid density, for which the PIM is more accurate than the RIM, there are few clear trends to suggest that one model is more accurate than the other for the four alkali halide systems studied here.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Hawaii Wave Surge Energy Converter (HAWSEC) OSU O.H. Hinsdale Basin

The following information and metadata applies to both the Phase I (Hydrodynamics) and Phase II (Full System Power Take-Off) zip folders which contain testing data from the OSU (Oregon State University) O.H. Hinsdale Wave Research Laboratory, from both OSU and the University of Hawaii at Manoa (UH). See zip folders provided further below in the downloads section. For experimental data of the full system, including PTO, see Phase II dataset. There are two main directories in each Phases's zip folder: "OSU_data" and "UH_data". The "OSU_data" directory contains data collected from their DAQ (data acquisition system), which includes all wave gauge observations, as well as body motions derived from their Qualisys motion tracking system. The organization of the directory follows OSU's convention. Detailed information on the instrument setup can be found under "OSU_data/docs/setup/instm_locations". The experiments conducted are documented in the "OSU_data/docs/daq_logs", which provides the trial number to the corresponding data located under "OSU_data/data" in several formats (e.g., ".mat" and ".txt"). Inside the trial directory, data is provided for each of the instruments defined in "OSU_data/docs/setup/instm_locations". The "UH_data" directory contains data collected from their DAQ. The data is stored in a ".tdms" file format. There are free plug-ins for Microsoft Excel and MathWorks MATLAB to read the ".tdms" format. Below are a few links providing methods to read in the data, but a Google search should identify alternatives sources if these no longer exist (valid as of January 2024): Excel: http://www.ni.com/example/27944/en/ MATLAB: https://www.mathworks.com/matlabcentral/fileexchange/30023-tdms-reader The Excel plugin is recommend to get a quick overview of the data. The UH data is organized by directory name, in which the sub-directories for each experiment contains a directory whose name defines the wave height and period for the experimental data within. For example, a directory name "H02_T0275" corresponds to an experiment with wave height 0.1m and a period of 2.75s. For random wave data, the gamma value is also included in the directory name. For example, a directory name "H02_T0225_G18" corresponds to an experiment with a significant wave height of 0.2m, a peak period of 2.25s, and a gamma value of 1.8, with each spectra being a TMA spectrum. For the free decay experiments, the directory name is defined by the initial angular displacement. For example, a directory name "ang05_run01" corresponds to an experiment with an initial angular displacement of 5 degrees. There is a dataset in the UH data for each corresponding experiment defined in the OSU DAQ logs. The ".tdms" data is output from the DAQ at fixed intervals. Therefore, if multiple files are contained within the folder, the data will need to be stitched together. Within the UH dataset, there are two input channels from the OSU DAQ providing a random square wave signal for time synchronization ("ENV-WHT-0010") and a high/low signal ("ENV-WHT-0012") to identify when the wave maker is active (+5V). The UH data is logged as a collection of channel outputs. Channels not in use for the OSU testing (either Phase I or Phase II) are marked "nan" below. If the sensor is disconnected, it will record noise throughout the experiment. Below are the channel definitions in terms of what they measure: GPS Time = time CYL-POS-0001 = position between flap and fixed reference CYL-LCA-0001 = force between flap and hydraulic cylinder REC-LPT-0001 = nan REC-HPT-0001 = nan REC-HPT-0002 = nan REC-HPT-0003 = nan HHT-HPT-0001 = pressure at exhaust ("head" only) REC-FQC-0001 = nan REC-FQC-0002 = nan HHT-FQC-0001 = flow at exhaust ("head" only) ENV-WHT-0001 = nan ENV-WHT-0002 = nan ENV-WHT-0003 = nan ENV-WHT-0010 = random signal from OSU DAQ ENV-WHT-0012 = high/low signal from OSU DAQ Also included is a calibration curve to convert the string pot data to flap pi...

16 TIDAL AND WAVE POWER↗
DOE OSTI2025

Establishing a process-structure-property-performance framework for SLS additive manufacturing through integrated multiscale modeling

This study presents a comprehensive suite of high-fidelity computational models that integrate multiscale and multiphysics simulations to capture the full Selective Laser Sintering (SLS) additive manufacturing process—from initial melting and solidification to mechanical response under external loads. Process simulations are linked with mechanical analysis through Representative Volume Elements (RVEs), establishing a process-structure–property-performance framework. The interaction between laser light and polyamide 12 (PA12) powder is modeled, accounting for laser characteristics and the optical, thermal, and geometrical properties of the powder. The heat source is incorporated into a heat transfer model, coupled with crystallization kinetics and densification models to predict material density and crystallinity. The porosity distribution from the densification model and crystallinity interpolated from experimental data are used to construct the RVEs. A multi-mechanism constitutive model is then calibrated using mechanical tests to predict the stress–strain response. Simulation results show good agreement with experimental data in terms of porosity, crystallinity, and mechanical performance when sufficient laser power (62 W or higher) is used. This research supports the inverse design of 3D-printed structures by introducing a high-fidelity framework that combines multiscale and multiphysics modeling with experimental calibration for predictive and performance-driven additive manufacturing.

SLS↗
DOE OSTI2023

A dynamic kinetic model captures cell-free metabolism for improved butanol production

Cell-free systems are useful tools for prototyping metabolic pathways and optimizing the production of various bioproducts. Mechanistically-based kinetic models are uniquely suited to analyze dynamic experimental data collected from cell-free systems and provide vital qualitative insight. However, to date, dynamic kinetic models have not been applied with rigorous biological constraints or trained on adequate experimental data to the degree that they would give high confidence in predictions and broadly demonstrate the potential for widespread use of such kinetic models. In this work, we construct a large-scale dynamic model of cell-free metabolism with the goal of understanding and optimizing butanol production in a cell-free system. Using a combination of parameterization methods, the resultant model captures experimental metabolite measurements across two experimental conditions for nine metabolites at timepoints between 0 and 24 hours. Here, we present analysis of the model predictions, provide recommendations for butanol optimization, and identify the aldehyde/alcohol dehydrogenase as the primary bottleneck in butanol production. Sensitivity analysis further reveals the extent to which various parameters are constrained, and our approach for probing valid parameter ranges can be applied to other modeling efforts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Predictive modeling of NSTX discharges with the updated multi-mode anomalous transport module

Abstract The objective of this study is twofold: firstly, to demonstrate the consistency between the anomalous transport results produced by updated Multi-Mode Model (MMM) version 9.0.4 and those obtained through gyrokinetic simulations; and secondly, to showcase MMM’s ability to predict electron and ion temperature profiles in low aspect ratio, high beta NSTX discharges. MMM encompasses a range of transport mechanisms driven by electron and ion temperature gradients, trapped electrons, kinetic ballooning, peeling, microtearing, and drift resistive inertial ballooning modes. These modes within MMM are being verified through corresponding gyrokinetic results. The modes that potentially contribute to ion thermal transport are stable in MMM, aligning with both experimental data and findings from linear CGYRO simulations. The isotope effects on these modes are also studied and higher mass is found to be stabilizing, consistent with the experimental trend. The electron thermal power across the flux surface is computed within MMM and compared to experimental measurements and nonlinear CGYRO simulation results. Specifically, the electron temperature gradient modes (ETGM) within MMM account for 2.0 MW of thermal power, consistent with experimental findings. It is noteworthy that the ETGM model requires approximately 5.0 ms of computation time on a standard desktop, while nonlinear CGYRO simulations necessitate 8.0 h on 8 K cores. MMM proves to be highly computationally efficient, a crucial attribute for various applications, including real-time control, tokamak scenario optimization, and uncertainty quantification of experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Appraising constrained second-order power corrections in HQET with Λ b →Λ c Ι⁢ν

We derive the Λ b →Λ c form factors for the Standard Model and beyond at second order in heavy quark effective theory, applying the recently proposed residual chiral expansion to reduce the set of unknown subsubleading hadronic functions to a single, highly constrained function, that is fully determined by hadron mass parameters at zero recoil. We fit a form factor parametrization based on these results to all available lattice QCD predictions and experimental data. We find that the constrained and predictive structure of the form factors under the residual chiral expansion is in excellent agreement with lattice QCD predictions and experimental data, as well as prior heavy-quark-effective-theory-based fits.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗